(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Small AC Motors（Page2）
| Days to Ship |
|
|---|
-
Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies
ORIENTAL MOTOR
Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation. Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
Standard Price: MYR 347.59- Days to Ship: 9 Day(s) or more -
Extra Low Speed Synchronous Motor, SMK Series
ORIENTAL MOTOR
Continuous rated synchronization motor capable of instant forward/reverse operation
[Features]
· Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
· Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
· Rotates precisely in sync with power supply frequency.
· Rotation speed does not change even if load fluctuates.
· Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
· Capable of continuous rated drive in both forward and reverse operation.
· Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
· Optimal for transport conveyors that start and stop repeatedly, etc.
· Rotates at a fixed speed even in lowering state.
· Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
·
· Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
· A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.Standard Price: MYR 365.15- Days to Ship: 9 Day(s) or more -
OL Type with LH Linear Head Reversible Motor
ORIENTAL MOTOR
LH linear head with reversible motor of the OL type.
Standard Price: MYR 1,478.43- Days to Ship: 44 Day(s) or more -
ORIENTAL MOTOR
- LH Linear Head from ORIENTAL MOTOR.
- The LH Series of linear heads with a rack-and-pinion mechanism are coupled with standard AC compact motors. They easily produce linear motion such as pressing and reversing.
- A wide variety of linear heads are available, depending on basic speed, length of rack, maximum transportable mass, direction of rack movement in respect to the mounting face etc.
- Basic speed is based on synchronous speed (1800 r/min at 60Hz). The actual speed varies with the load or power supply frequency.Standard Price: MYR 996.86- Days to Ship: 17 Day(s) or more -
Increased Safety Explosion Proof Type Motor, K Series
ORIENTAL MOTOR
Motor with improved insulation performance and other safety factors against danger, damage, etc. caused by increased ambient temperature so that it can be used in hazardous places with a risk of generation of explosive gas, flammable gas, etc. Has completely closed structure, which makes it impossible for the insulated charging component to come into contact with exterior and also prevents dust and the like from entering.
Standard Price: MYR 1,237.69- Days to Ship: 27 Day(s) -
![Induction Motor 40W Gear Head [S9KB3]](//my.misumi-ec.com/linked/material/mech/SPG1/PHOTO/221000623411_001.jpg?$product_view_b$)
Induction Motor 40W Gear Head [S9KB3]
SPG
Precision machining of motor shaft and helical gear reduces noise level by 10-15dB.
[Features]
· Allowable torque from when combined with gearhead.
· Allowable torque when connected with a middle gearhead with a reduction ratio of 1/10 is 9.80N-m- CAD ：
- 3D
Standard Price: MYR 197.96- Days to Ship: 5 Day(s) or more -
Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type)
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.
· Combination type products that are delivered with the motor and gearhead already assembled are available.
· Mounting to equipment can also be performed easily.
· Combination type products are delivered with the motor and gearhead already assembled.
· Mounting work to equipment is reduced.
· Motor and gearhead can be ordered separately when changing motor/gearhead combinations or when a gearhead is needed for protection.Standard Price: MYR 1,645.69- Days to Ship: 17 Day(s) or more -
High Power Induction Motor BH Series 200 W
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.Standard Price: MYR 1,931.01- Days to Ship: 17 Day(s) or more -
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.Standard Price: MYR 3,258.65- Days to Ship: 17 Day(s) -
Single-Unit Motor with Electromagnetic Brake, World K2 Series
ORIENTAL MOTOR
Compatible with global voltages
[Features]
· Compliant with international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 724.15- Days to Ship: 9 Day(s) or more -
Reaction Synchronous Motor K Series
ORIENTAL MOTOR
A reaction synchronous motor is a motor that rotates at a rotation speed that is synchronized with the power supply frequency. Single-direction continuous operation, and is appropriate for when a fixed rotation speed is desired even if the load fluctuates.
Standard Price: MYR 359.30- Days to Ship: 27 Day(s) or more -
Induction motor world K series IP65 terminal box
ORIENTAL MOTOR
Motor with terminal that corresponds to protection grade IP65. Equipped with metal terminal box.
[Features]
· IP65 specification suitable for use in factory environments. Uses parts with excellent environment resistance that meet the demands of factory environments.
Dust-proof and dust-proof performance that corresponds to protection grade IP65, sturdy metal terminal box, etc.
· "Combination type," delivered with motor and gearhead assembled: Combination type products are delivered with the motor and gearhead already assembled. Can reduce installation man-hours, and eliminates concerns about damaging the motor shaft during assembly.
· Structure with user-friendly motor terminal box: The terminal box positioned in the back part of the motor not only boasts high environment resistance but also has a user-friendly structure.
Reasons for user-friendliness
(1) Wiring is connected with round crimp terminals.·
(2) The direction of the cable pull-out opening can be changed by the method used to assemble the motor and gearhead.
(3) Conduit pipe, etc. can be connected after removing the cable gland.
(4) Compatible with AWG14 (2 mm2) cable. Cable size can be changed to suit the motor output.Standard Price: MYR 850.59- Days to Ship: 44 Day(s) or more -
Parallel Shaft GCH Gearhead for C and B Motors
ORIENTAL MOTOR
- Parallel Shaft GCH Gearhead for C and B Motors from ORIENTAL MOTOR.
- Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
- Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
- GCH type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
- GCH is designed for use with GCH-type pinion shaft motor.Standard Price: MYR 554.43- Days to Ship: 17 Day(s) -
Standard Price: MYR 365.46- Days to Ship: 12 Day(s) or more -
Combined Use Parallel Shaft Gear Head Single Unit KII Series GV Type
ORIENTAL MOTOR
- Gear Head Single Unit KII Series GV Type from ORIENTAL MOTOR.
- Wide Variety of Products Gearheads are available with 21 different gear ratios from 1:5 to 1:360.
- The lineup includes GV series, GVH series and GVR series.
- The following items are included in each product. (Gearhead, Mounting Screws, Parallel Key, Operating Manual)
- Applicable for 4 motor sizes, size 2 (flange 60 mm), size 3 (flange 70 mm), size 4 (flange 80 mm), and 5 (flange 90 mm).Standard Price: MYR 313.08- Days to Ship: 35 Day(s) or more -
Standard Price: MYR 416.03- Days to Ship: 5 Day(s) or more -
ORIENTAL MOTOR
[Features]
・ Highly efficient and highly characteristic three-phase motor with optimal design
・ Achieves the best characteristics in combination with an inverter
・ Compatible with protection rating IP66 (Type with terminal box)
・ Equipped with stainless steel shaft as standard
・ Compatible with H1 grease for food machine
・ Compact and lightweight
・ Low profile terminal box (Type with terminal box)
・ International standards (UL/CSA standard, CCC system, CE marking)Standard Price: MYR 668.67- Days to Ship: 12 Day(s) or more -
ORIENTAL MOTOR
- Parallel Shaft Gearhead, GFV Series from ORIENTAL MOTOR.
- Improving the Installation Accuracy (GFV Gear), The boss of the output shaft and the installation surface are shaped. This improves the accuracy of device installation.
- The output shaft for the gearhead has a tapped hole at the end. The hole can be used for supporting the prevention of coming out of a transmission component.
- The gearhead has a long life using special bearings and grease for high-speed rotation. It achieves a rated life of 10,000 hours.Standard Price: MYR 1,400.02- Days to Ship: 15 Day(s) -
MISUMI
Small AC Brake Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.
【Outerline drawing】
Detailed outline drawings.Detailed wiring diagrams.Detailed technical data.
【Usage】
- Suitable for small motors used in lifting devices or safety stop applications where immediate stop and position holding are required when power is off.
【Product Features】
- Equipped with an electromagnetic brake, enabling immediate stop and hold even when power is cut, and safe operation during power outages.
- Operates with the same power supply and allows easy selection of holding torque.
- Ideal for devices requiring safe stop, such as lifting and vertical transport.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 303.10- Days to Ship: 13 Day(s) -
Small AC Speed Controller Motors 6-200W
MISUMI
Small AC Speed Controller Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.
【Outerline drawing】Detail outerline drawingsDetailed technical data
【Usage】
- Small motor with integrated controller, capable of speed adjustment from 90 to 1400 r/min at 50Hz and 90 to 1700 r/min at 60Hz.
【Product Features】
- Covers a wide speed range of 90–1700 r/min, enabling quick line synchronization and yield improvement.
- No immediate stop function; avoid prolonged low-speed operation to prevent overheating.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 183.27- Days to Ship: 13 Day(s) -
MISUMI
Small AC Torque Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN for the shaft end shape.
【Outerline drawing】Detailed outline drawingsDetailed technical data
【Usage】
- Small torque motor that can maintain constant tension from low speed to stop.
【Product Features】
- High starting torque allows easy speed control with only voltage adjustment.
- Simple structure with voltage control method and excellent heat dissipation design for continuous operation.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 151.96- Days to Ship: 13 Day(s) -
Gearhead 3-200 for MISUMI Small AC Motors
MISUMI
Gearhead 3-200 for MISUMI Small AC Motors launched as MISUMI Economy series
【Usage】
- Mounted directly on small motors to achieve compact heavy-load transport with high permissible torque.
【Product Features】
- Wide selection of reduction ratios from 1/3 to 1/200, and can handle even larger ratios when combined with intermediate reducers.- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 110.52- Days to Ship: 13 Day(s) -
Small AC Induction Motor Right Angle 25～200W
MISUMI
Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.
Small AC Induction Motors Right Angle type 25-200W launched as MISUMI Economy series
【Outerline Drawings】
Detailed outline drawings. Detailed wiring diagrams.
【Usage】
- A general-purpose motor that runs at constant speed for 24 hours, prioritizes cost-effectiveness, and is easy to maintain.
【Product Features】
- High efficiency enable energy saving and stable operation for constant-speed applications such as conveyor.
- Easy selection of various voltages, and low-speed torque.- Volume Discount
Standard Price: MYR 621.89- Days to Ship: 13 Day(s) -
Small AC Reversible Motor Right Angle 25～120W
MISUMI
Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.
Small AC Reversible Motors Right Angle type 25-120W launched as MISUMI Economy series
【Outerline Drawings】 Detailed outline drawings. Detailed wiring diagrams.
【Usage】
- Used in situations where frequent direction reversal is required, with a friction brake at the rear of the motor.
- Ideal reversible motor for frequent reverse operation.
【Product Features】
- Suppresses overrun and maintains torque.
- Friction brake allows immediate increase in reversal when load is applied.
- Meets high-speed operation needs for small conveyors or stopper mechanisms.- Volume Discount
Standard Price: MYR 635.54- Days to Ship: 13 Day(s) -
Small AC Brake Motor Right Angle 25～200W
MISUMI
Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.
Small AC Brake Motors Right Angle type 25-200W launched as MISUMI Economy series
【Outerline Drawings】 Detailed outline drawings. Detailed wiring diagrams.
【Usage】
- Suitable for small motors used in lifting devices or safety stop applications where immediate stop and position holding are required when power is off.
【Product Features】
- Equipped with an electromagnetic brake, enabling immediate stop and hold even when power is cut, and safe operation during power outages.
- Operates with the same power supply and allows easy selection of holding torque.
- Ideal for devices requiring safe stop, such as lifting and vertical transport.- Volume Discount
Standard Price: MYR 782.13- Days to Ship: 13 Day(s) -
Small AC Speed Control Motor Right Angle 25～200W
MISUMI
Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.
Small AC Speed Control Motors Right Angle type 25-200W launched as MISUMI Economy series
【Outerline Drawings】 Detailed outline drawings. Detailed wiring diagrams.
【Usage】
- Small motor with integrated controller, capable of speed adjustment from 90 to 1400 r/min at 50Hz and 90 to 1700 r/min at 60Hz.
【Product Features】
- Covers a wide speed range of 90–1700 r/min, enabling quick line synchronization and yield improvement.
- No immediate stop function; avoid prolonged low-speed operation to prevent overheating.- Volume Discount
Standard Price: MYR 643.33- Days to Ship: 13 Day(s) -
Small AC Motor Right Angle Gearhead for MISUMI 3～180
MISUMI
Longer lead times due to Lunar New Year. Delivery schedules will return to normal starting Feb 24.
Gearhead 3-180 for MISUMI Small AC Motors Right Angle type launched as MISUMI Economy series
【Usage】
- Mounted directly on small motors to achieve compact heavy-load transport with high permissible torque.
【Product Features】
- Wide selection of reduction ratios from 1/3 to 1/180- Volume Discount
Standard Price: MYR 412.16- Days to Ship: 13 Day(s) -
Parallel Shaft Intermediate Gearheads
ORIENTAL MOTOR
Middle gear head.
[Features]
· Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
· Abundant product lineup of parallel shaft gearheads available.Standard Price: MYR 275.15- Days to Ship: 5 Day(s) or more -
Combined Use Orthogonal Shaft Solid and Hollow Gear Head Single Unit, BH Series
ORIENTAL MOTOR
Orthogonal shaft solid / hollow shaft single-unit gearhead for combinations from the BH series.
Standard Price: MYR 1,129.25- Days to Ship: 17 Day(s) or more -
Electromagnetic Brake Motor BH Series: Parallel Shaft Gear Head (Combination Type)
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.Standard Price: MYR 2,661.24- Days to Ship: 17 Day(s) -
Motors with Electromagnetic Brake BH series motor units
ORIENTAL MOTOR
Smallest size in its class but achieves 200W output.
Standard Price: MYR 2,165.83- Days to Ship: 17 Day(s) -
ORIENTAL MOTOR
Control circuit for instant stopping that can rapidly stop induction motors, reversible motors, and motors with electromagnetic brakes.
[Features]
· Instantly stops the motor with an electronic brake.
· Has major braking power for stopping in about 0.1 seconds for an individual motor, with the overrun volume staying at 1 to 1.5 rotations or less.
· A braking current flows into the motor for about 0.4 seconds, but afterwards the motor is automatically cut off from the power supply.
· It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
· Optimal for applications such as motor inching (dimensions) operation, etc.
· SB50W power relay is not required for non-contact types.
· Has simple wire connections, which helps cut down on the number of times maintenance is needed.
· It is an electronic brake triggered by a current, so unlike a mechanical electromagnetic brake it has no parts subject to wear, which gives it long life.
· Optimal for applications such as motor inching (dimensions) operation, etc.
· SB50W power relay is not required for non-contact types.
· Has simple wire connections, which helps cut down on the number of times maintenance is needed.
· SB50W when used in combination with a motor with electromagnetic brakes, couples electronic brakes and electromagnetic brakes together, and so allows the motors to retain the load after instant braking.
· Optimal for applications that require load retention after instant brakingStandard Price: MYR 580.37 Days to Ship: 5 Day(s) or more -
Pack-In Type Speed Control Motor Unit, PSH Series
ORIENTAL MOTOR
Control pack built into the back of the motor
[Features]
· Control pack and speed setting volume are built into the back of the motor.
· Wire connection not required. Operation is also simple.
· Variable speed range is 50Hz: 90 to 1400r/min and 60Hz90 to 1500r/min.
· Terminal box type. Appropriate for controlling forward rotation and reverse rotation with an external relay or the like.
· Plug cord type.
· Can be switched between forward rotation and reverse rotation with just a CW/CCW switch in the switch box.
· Simple connection just by connecting AC power cord with plug (2 m) to a commercial power supplyStandard Price: MYR 981.90- Days to Ship: 9 Day(s) or more -
Motor World K Series with Electromagnetic Brake and IP65 Terminal Box
ORIENTAL MOTOR
[Features]
· Motor with non-excitation operation type electromagnetic brake with terminal box that corresponds to protection grade IP65.
[Lineup of terminal boxes to go with motors with electromagnetic brakes available]
· Equipped with non-excitation operation type electromagnetic brake: Because it is equipped with an alternating current non-excitation operation type electromagnetic brake, the motor stops at the same time was when the power supply is OFF, and the load is retained.
· Optimal for applications requiring load retention: Optimal for applications requiring load retention, such as up/down drives.
[IP65 specification suitable for factory environments]
· The world K series motor with terminal box uses parts with excellent environment resistance that meet the demands of factory environments.
[Dust-proof and drip-proof performance corresponds to protection grade IP65]
· Uses O-ring in its motor part and an oil sheet structure in its gearhead part to achieve protection gradeIP65. Optimal for use in environments requiring dust-proofing and drip-proofing, such as where cutting fragments, water droplets, and the like are scattered.
[A sturdy metal terminal box.]
· Equipped with metal cable gland in its sturdy aluminum die casting terminal box.
[Structure with user-friendly motor terminal box]
· The terminal box positioned in the back part of the motor not only boasts high environment resistance but also has a user-friendly structure.
["Combination type," delivered with motor and gearhead assembled]
· Combination type products are delivered with the motor and gearhead already assembled. Can reduce installation man-hours, and eliminates concerns about damaging the motor shaft during assembly.Standard Price: MYR 1,261.90- Days to Ship: 44 Day(s) or more -
Parallel Shaft GC Gearhead for C and B Motors
ORIENTAL MOTOR
- Parallel Shaft GC Gearhead for C and B Motors from ORIENTAL MOTOR.
- Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
- Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
- GC type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
- GC is designed for use with GC-type pinion shaft motor.Standard Price: MYR 377.82- Days to Ship: 17 Day(s) -
Standard Price: MYR 1,487.59- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 1,090.63- Days to Ship: 17 Day(s) -
Standard Price: MYR 2,938.48- Days to Ship: 17 Day(s) or more -
Other Goods We Handle【1-10 Pieces Per Package】
ORIENTAL MOTOR
- Accessory for speed control type motor from ORIENTAL MOTOR.
- BLED3A is Brushless DC Motor Driver of BLE series, which uses power supply at single-phase 100 - 120 VAC.
- CHC4821AUL is Capacitor Cap. Sold in 10 pieces per pack.
- US425-01T is the speed control unit of US series AC Motor Systems. The speed can be set easily with the potentiometer on the front panel of the control unit.Standard Price: MYR 55.77- Days to Ship: 2 Day(s) or more -
Intermediate Gear Head EA968CS-15
ESCO
【Product Specifications】
・The reduction gear ratio-10
・Description-For 15WStandard Price: MYR 425.92 Days to Ship: 5 Day(s) or more -
Gear Head (for 6W) EA968CV-100
ESCO
【Product Specifications】
・For 6W
・Ball bearing type
・Size-60mm
・The reduction gear ratio-1/100
・Allowable torque(N・m)-50Hz：2.94、60Hz：2.78Standard Price: MYR 474.54 Days to Ship: 5 Day(s) or more -
Gear Head (for 15W) EA968CW-200
ESCO
【Product Specifications】
・For 15W
・Ball bearing type
・Size-70mm
・The reduction gear ratio-1/200
・Allowable torque(N・m)-50Hz：4.9、60Hz：4.9Standard Price: MYR 490.93 Days to Ship: 5 Day(s) or more -
Gear Head (for 40W) EA968CY-200
ESCO
【Product Specifications】
・For 40W
・Ball bearing type
・Size-90mm
・The reduction gear ratio-1/200
・Allowable torque(N・m)-50Hz：9.8、60Hz：9.8Standard Price: MYR 588.82 Days to Ship: 5 Day(s) or more -
Gear Head (for 60 and 90W) EA968CZ-15
ESCO
【Product Specifications】
・For 60W or 90W
・Ball bearing type
・Size-90mm
・The reduction gear ratio-1/15
・Allowable torque(N・m)-50Hz：5.37、60Hz：4.29(allowable torque is a value of 60W)Standard Price: MYR 834.52 Days to Ship: 6 Day(s) or more -
AC Speed Control Motor, DSC Series
ORIENTAL MOTOR
Easy speed control motor with full functionality.
A speed control motor with excellent cost performance that is reasonably priced and sized.
[Features]
・ Speed control with closed loop control
・ Space saving and reduction of installation effort
・ Full functionality in a small body
・ High reliability
・ Vertical drive is possible with an electromagnetic brake
・ Uses a gear head with excellent torque and strength
・ Motor and gearhead assembled
・ Achieves space saving and cost reductionStandard Price: MYR 701.52- Days to Ship: 13 Day(s) or more
![Induction Motor 40W Gear Head [S9KB3]](http://my.misumi-ec.com/linked/material/mech/SPG1/PHOTO/221000623411_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Motor Type |
| Square Flange Dim. A(mm) |
| Rated Output(W) |
| Power Supply |
| Reduction Ratio |
| Gear Head Type |
| Electromagnetic Brakes, Clutches |
| Environment |
| Voltage(V) |
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | SPG | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ESCO | ORIENTAL MOTOR | ORIENTAL MOTOR | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ESCO | ESCO | ESCO | ESCO | ESCO | ORIENTAL MOTOR |
| Product Series | Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies | Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type) | Single-Unit Motor with Electromagnetic Brake, World K2 Series | Combined Use Parallel Shaft Gear Head Single Unit KII Series GV Type | Combined Use Orthogonal Shaft Solid and Hollow Gear Head Single Unit, BH Series | Electromagnetic Brake Motor BH Series: Parallel Shaft Gear Head (Combination Type) | Motor World K Series with Electromagnetic Brake and IP65 Terminal Box | BH type combined-use parallel shaft gearhead, standalone unit | |||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 44 Day(s) or more | 17 Day(s) or more | 27 Day(s) | 5 Day(s) or more | 17 Day(s) or more | 17 Day(s) or more | 17 Day(s) | 9 Day(s) or more | 27 Day(s) or more | 44 Day(s) or more | 17 Day(s) | 12 Day(s) or more | 35 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 15 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 13 Day(s) | 5 Day(s) or more | 17 Day(s) or more | 17 Day(s) | 17 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 44 Day(s) or more | 17 Day(s) | 17 Day(s) or more | 17 Day(s) | 17 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more |
| Type | Motor Only | Motor Only / Set | Set | Gear Head Only | Motor Only | Gear Head Only | Set | Set | Set | Motor Only | Motor Only | Set | Gear Head Only | Gear Head Only | Gear Head Only | Motor group | Motor Only / Set | - | Motor Only | Motor Only | Motor Only | Gear Head Only | Motors | Motors | Motors | Motors | Gear Head Only | Gear Head Only | Gear Head Only | Set | Motor Only | Others | Motor Only / Set | Set | Gear Head Only | Gear Head Only | Gear Head Only | Set | - | - | - | - | - | - | Others / Controller Only |
| Motor Type | Extra Low Speed Synchronous | Extra Low Speed Synchronous | Reversible | - | Induction | - | Induction | Induction | Induction | Induction ～ Reversible | Reaction Synchronous | Induction | - | - | - | Induction | Induction | - | Brake motor | Speed Control | Torque | - | Induction | Reversible | Brake motor | Speed Control | - | - | - | Induction | Induction | - | Speed Control | Induction ～ Reversible | - | - | - | Speed Control | - | - | - | - | - | - | Speed Control |
| Square Flange Dim. A(mm) | 42 | 42 ～ 90 | 42 | 60 ～ 90 | 80 ～ 90 | 90 | 104 | 104 | 104 | 60 ～ 90 | 60 ～ 90 | 60 | 90 | 60 ～ 90 | 80 ～ 90 | - | 80 ～ 110 | - | 60 ～ 104 | 60 ～ 104 | 60 ～ 90 | 60 ～ 104 | 80 ～ 104 | 80 ～ 90 | 80 ～ 104 | 80 ～ 104 | 80 ～ 104 | 60 ～ 90 | 104 | 104 | 104 | - | 80 ～ 90 | 60 | 90 | 60 ～ 80 | 104 | 60 ～ 90 | - | - | - | - | - | - | - |
| Rated Output(W) | - | - | 1 | 6 ～ 90 | 25 ～ 40 | 40 | 200 | 200 | 200 | 6 ～ 90 | 3 ～ 25 | 6 | - | - | - | - | 30 ～ 200 | - | 6 ～ 200 | 6 ～ 200 | 3.2 ～ 20 | - | 25 ～ 200 | 25 ～ 120 | 25 ～ 200 | 25 ～ 200 | - | - | - | 200 | 200 | - | 25 ～ 40 | 6 | - | - | - | 6 ～ 40 | - | - | - | - | - | - | 6 ～ 90 |
| Power Supply | Single-Phase | Single-Phase | Single-Phase | - | 3-Phase | - | 3-Phase ～ Single-Phase | 3-Phase ～ Single-Phase | 3-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | - | - | - | Single-Phase | 3-Phase | - | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | - | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | - | - | - | 3-Phase | 3-Phase | - | Single-Phase | 3-Phase ～ Single-Phase | - | - | - | Single-Phase | - | - | - | - | - | - | Single-Phase |
| Reduction Ratio | - | 3 ～ 120 | - | - | - | 3 ～ 180 | 3 ～ 180 | 5 ～ 180 | 5 ～ 180 | - | - | 2 ～ 180 | 3 ～ 180 | 5 ～ 360 | 5 ～ 360 | - | 5 ～ 100 | - | - | - | - | 3 ～ 200 | 3 ～ 180 | 3 ～ 180 | 3 ～ 180 | 3 ～ 180 | 7.5 ～ 180 | 10 | 5 ～ 180 | 3 ～ 180 | - | - | - | 3 ～ 180 | 3 ～ 180 | - | 3 ～ 180 | - | - | - | - | - | - | - | - |
| Gear Head Type | - | - | Linear | Linear | - | Parallel Shaft | Parallel Shaft | Perpendicular Shaft | Perpendicular Shaft | - | - | Parallel Shaft | Parallel Shaft | Parallel Shaft | Parallel Shaft | - | Not Provided / Parallel Shaft | - | Not Provided | Not Provided | Not Provided | Parallel Shaft | - | - | - | - | - | Parallel Shaft | Perpendicular Shaft | Parallel Shaft | - | - | - | Parallel Shaft | Parallel Shaft | Linear | Parallel Shaft | - | - | - | - | - | - | - | Not Provided |
| Electromagnetic Brakes, Clutches | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Electromagnetic Brakes | Not Provided / Electromagnetic Brakes | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided / Electromagnetic Brakes | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Electromagnetic Brakes | Not Provided | - | Not Provided | Not Provided | Electromagnetic Brakes | Electromagnetic Brakes | Not Provided | Not Provided | Electromagnetic Brakes | Not Provided | Not Provided | Not Provided | Electromagnetic Brakes | - | - | - | - | - | - | Not Provided / Electromagnetic Brakes |
| Environment | Standard | Standard | Standard | Standard | Standard / Explosion Proof | Standard | Standard | Standard | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | - | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | Standard | - | - | - | - | - | - | Standard |
| Voltage(V) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 ～ 380 | 100 ～ 220/230 | 60/110 ～ 140/220 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Voltage | 24 | 100 ～ 230 | 100 ～ 200 | - | 200 | - | 100 ～ 415 | 100 ～ 415 | 200 ～ 230 | 100 ～ 230 | 100 ～ 115 | 100 ～ 230 | - | - | - | 100 ～ 200 | 200 ～ 415 | - | - | - | - | - | 100 ～ 380 | 100 ～ 230 | 100 ～ 380 | 100 ～ 230 | - | - | - | 200 ～ 230 | 200 ～ 230 | - | 100 | 100 ～ 230 | - | - | - | 100 ～ 200 | - | - | - | - | - | - | 100 ～ 230 |
![Induction Motor 40W Gear Head [S9KB3]](http://my.misumi-ec.com/linked/material/mech/SPG1/PHOTO/221000623411_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Type
-
Motor Type
-
Square Flange Dim. A(mm)
-
Rated Output(W)
-
Power Supply
-
Reduction Ratio
- 2
- 3
- 3～180
- 3.6
- 5
- 6
- 7.5
- 9
- 10
- 10 (Middle gearhead)
- 12.5
- 15
- 18
- 20
- 25
- 30
- 36
- 40
- 50
- 60
- 75
- 80
- 90
- 100
- 120
- 150
- 160
- 180
- 200
- 240
- 250
- 300
- 360
- 450
- 600
- 1200
-
Gear Head Type
- Not Provided
- Parallel Shaft
- Perpendicular Shaft
- Linear
-
Electromagnetic Brakes, Clutches
- Not Provided
- Electromagnetic Brakes
- Clutch
-
Environment
-
Voltage(V)
-
Voltage
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Small AC Motors
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy