[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Small AC Torque Motors 3-20W

Volume Discount

MiSUMi Economy

Small AC Torque Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN for the shaft end shape.
【Outerline drawing】
Detailed outline drawings
Detailed technical data
【Usage】
- Small torque motor that can maintain constant tension from low speed to stop.
【Product Features】
- High starting torque allows easy speed control with only voltage adjustment.
- Simple structure with voltage control method and excellent heat dissipation design for continuous operation.

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK	-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK	-
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK	LINK
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	*	*	LINK
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	*	*	LINK
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-	-

*: Scheduled to be released after web production in March 26th

Outline Drawing

Link Pages which have outerline dimension, wiring,technical data are available. Please refer to the page top " Product Description ".

◇Motor & Gearhead Set

Specification Table

～ Please select the model and parameters according to the options below before placing your order.

Part Number
Type・Flange Size

－

Shaft End Shape

－

Input Voltage /
Number of Poles

－

Additional Option
Gearhead Selection

－

Additional Option
Gear Ratio

EA-TM

2003

■ Motor Body

❶	❷			❸	❹
Type	No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Fan


Torque Motor EA-TM	2003	□60	3	GN：GN Gear A：Round	<4poles> A ：Single 110V、50/60Hz、4poles C ：Single 220/230V、50Hz、4poles	none
	3006	□70	6			none
	4010	□80	10			none
	5020	□90	20			none

The various safety standards are certified based on the model name indicated on the motor’s nameplate.

For the “-A” model with a voltage of 110V, please refer to the capacitor capacity shown on the actual unit’s nameplate.

■ Gearhead (Additional machining can be specified)
※ Additional machining can be designated only when selecting shaft types GN or GU.

➎			❻
Alterations Code	No	Flange Size	Gear Ratio
Alterations Code	No	Flange Size	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
GH	2	□60	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	3	□70	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	4	□80	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	5	□90	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200

※Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}

Specification Overview

❶ ❷			❸	❹				At Max Output Power
Type No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Current	Max. Output Power	Speed	Torque	Capacitor	Rated Voltage
					Voltage	Frequency	Current	Max. Output Power	Speed	Torque	Capacitor	Rated Voltage
					[V]	[Hz]	[A]	[W]	[mN・m]	[mN・m]	[μF]	[VAC]
EA-TM2003	□60	3	〈Pinion〉 -GN 〈Round〉 -A	-A	110	50	69	3.2	750	41	7.0	250
					60	50	25	1.3	750	16	7.0	250
					110	60	69	3.2	900	37	6.0	250
					60	60	25	1.3	900	11	6.0	250
				-C	220	50	69	3.2	750	41	1.5	450
					140	50	25	1.2	750	16	1.5	450
					220	60	69	3.2	900	37	1.2	450
					140	60	25	1.2	900	11	1.2	450
EA-TM3006	□70	6	〈Pinion〉 -GN 〈Round〉 -A	-A	110	50	134	6.0	750	80	8.0	250
					60	50	68	2.5	750	36	8.0	250
					110	60	134	6.5	900	74	7.0	250
					60	60	68	2.8	900	30	7.0	250
				-C	220	50	134	6.0	750	80	2.0	450
					140	50	68	2.5	750	36	2.0	450
					220	60	134	6.5	900	74	1.5	450
					140	60	68	2.8	900	30	1.5	450
EA-TM4010	□80	10	〈Pinion〉 -GN 〈Round〉 -A	-A	110	50	235	10.0	750	127	10.0	250
					60	50	74	3.0	750	46	10.0	250
					110	60	25	10.0	900	127	8.0	250
					60	60	69	3.0	900	38	8.0	250
				-C	220	50	265	10.0	750	127	2.5	450
					140	50	98	3.0	750	46	2.5	450
					220	60	225	10.0	900	127	2.0	450
					140	60	90	3.0	900	38	2.0	450
EA-TM5020	□90	20	〈Pinion〉 -GN 〈Round〉 -A	-A	110	50	363	20.0	750	224	15.0	250
					60	50	137	6.0	750	76	15.0	250
					110	60	29	26.0	900	216	12.0	250
					60	60	108	6.0	900	64	12.0	250
				-C	220	50	363	20.0	750	224	3.5	450
					140	50	137	6.0	750	76	3.5	450
					220	60	294	26.0	900	216	3.0	450
					140	60	108	6.0	900	64	3.0	450

○ How to Read the Torque Motor Speed–Torque Characteristics

The motor torque generally varies in proportion to the square of the applied voltage.
When the voltage applied to the motor is changed, the speed–torque characteristic curve
(where torque is maximum at standstill and decreases as speed increases) shifts according to the voltage level.
If the voltage is adjusted to 100V, 80V, and 60V, and the load torque is T₀, the motor will rotate at speeds N₁, N₂, and N₃, respectively.
In this way, the rotation speed can be easily controlled simply by adjusting the voltage.
The speed–torque characteristic curve is used to determine whether continuous operation or intermittent operation is required.
For applications involving a locked (stall) condition, only the torque coefficient needs to be considered.
Temperature rise of the motor can become an issue during continuous operation.
In such cases, select a motor with sufficient output for continuous operation and adjust the voltage to control the torque and speed.

○ Speed and Torque Characteristics (Reference Data)

EA-TM2003□-A

EA-TM2003□-C

EA-TM3006□-A

EA-TM3006□-C

EA-TM4010□-A

EA-TM4010□-C

EA-TM5020□-A

EA-TM5020□-C

Wiring Diagram

・The direction of rotation is based on the viewpoint from the motor shaft end.
CW indicates clockwise rotation, and CCW indicates counterclockwise rotation.

● Cautions
・For single-phase motors, always switch the rotation direction after the motor has come to a complete stop.
・Attempting to switch rotation while running may result in failure to change direction or delayed response.

Alterations

Alterations	Gearhead Set Purchase	Mid-Gear Set Purchase
Code	GH	GH10X
Spec.	You can purchase a gearhead set that matches the motor size and gear type. Please check the gearhead specification table to confirm the available gear ratios based on the motor flange number. [ ! ] Available gear ratios: for flange □42 → 1/3 to 1/60, others → 1/3 to 1/200. [Designation method] Gear ratio 1/30 → GH30	You can purchase a mid-gear set that matches the motor size. When combined with a gearhead, a greater gear ratio can be achieved. [ ! ] Only a gear ratio of 1/10 is available. [Designation method] GN10X






1 Code (Price per Code)	Check on Web	Check on Web

Product Features

1. Wide Speed Control Range via Sloping (Speed–Torque) Characteristics
Torque motors provide high starting torque and sloping speed–torque characteristics, allowing easy speed control simply by adjusting the supply voltage.
(Motor torque generally varies in proportion to the square of the applied voltage.)

2. Suitable for Winding Applications
Ideal for winding systems where material must be unwound at a constant speed and rewound under constant tension.
When the diameter of the winding spool doubles, the required torque must be doubled, while the speed must be reduced to half.

3. Can Be Used as a Brake
By operating the motor in the braking region of the speed–torque characteristics, it can function as a brake.
Applying DC voltage enables tension control operation, maintaining constant tension.

: 30; 45; 60

Part Number
EA-TM2003-A-A
EA-TM2003-A-C
EA-TM2003-GN-A
EA-TM2003-GN-C
EA-TM3006-A-A
EA-TM3006-A-C
EA-TM3006-GN-A
EA-TM3006-GN-C
EA-TM4010-A-A
EA-TM4010-A-C
EA-TM4010-GN-A
EA-TM4010-GN-C
EA-TM5020-A-A
EA-TM5020-A-C
EA-TM5020-GN-A
EA-TM5020-GN-C

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Square Flange Dim. A (mm)	Rated Output (W)	Voltage (V)	Shaft End Shape
MYR 151.96	1 Piece(s)	Available	13 Day(s)	10	60	3.2	60/110	Round Shaft
MYR 151.96	1 Piece(s)	Available	13 Day(s)	10	60	3.2	140/220	Round Shaft
MYR 151.96	1 Piece(s)	Available	13 Day(s)	10	60	3.2	60/110	GN Type Spline Shaft
MYR 151.96	1 Piece(s)	Available	13 Day(s)	10	60	3.2	140/220	GN Type Spline Shaft
MYR 196.27	1 Piece(s)	Available	13 Day(s)	10	70	6	60/110	Round Shaft
MYR 196.27	1 Piece(s)	Available	13 Day(s)	10	70	6	140/220	Round Shaft
MYR 196.27	1 Piece(s)	Available	13 Day(s)	10	70	6	60/110	GN Type Spline Shaft
MYR 196.27	1 Piece(s)	Available	13 Day(s)	10	70	6	140/220	GN Type Spline Shaft
MYR 232.14	1 Piece(s)	Available	13 Day(s)	10	80	10	60/110	Round Shaft
MYR 232.14	1 Piece(s)	Available	13 Day(s)	10	80	10	140/220	Round Shaft
MYR 232.14	1 Piece(s)	Available	13 Day(s)	10	80	10	60/110	GN Type Spline Shaft
MYR 232.14	1 Piece(s)	Available	13 Day(s)	10	80	10	140/220	GN Type Spline Shaft
MYR 305.98	1 Piece(s)	Available	13 Day(s)	10	90	20	60/110	Round Shaft
MYR 305.98	1 Piece(s)	Available	13 Day(s)	10	90	20	140/220	Round Shaft
MYR 305.98	1 Piece(s)	Available	13 Day(s)	10	90	20	60/110	GN Type Spline Shaft
MYR 305.98	1 Piece(s)	Available	13 Day(s)	10	90	20	140/220	GN Type Spline Shaft

Basic Information

Type	Motor Only	Motor Type	Torque	Power Supply	1-phase
Gear Head Type	Not Provided	Electromagnetic Brakes, Clutches	Not Provided	Environment	Standard
Type	Torque Motor	Fan	None	T-BOX (Terminal Box)	None
Number of Poles	4 Poles	Frequency(Hz)	50/60

Configure

16 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Square Flange Dim. A(mm)
60

70

80

90
Clear
Rated Output(W)
3.2

6

10

20
Clear
Voltage(V)
60/110

140/220
Clear
Shaft End Shape
- GN Type Spline Shaft
- Round Shaft
Clear
type
- EA-TM
Clear
CAD
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Small AC Torque Motors 3-20W

Basic Information

Configure

Specification/Dimensions

Square Flange Dim. A(mm)

Rated Output(W)

Voltage(V)

Shaft End Shape

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm