[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Small AC Brake Motors 6-200W

Volume Discount

MiSUMi Economy

Small AC Brake Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.
【Outerline drawing】
Detailed outline drawings.
Detailed wiring diagrams.
Detailed technical data.
【Usage】
- Suitable for small motors used in lifting devices or safety stop applications where immediate stop and position holding are required when power is off.
【Product Features】
- Equipped with an electromagnetic brake, enabling immediate stop and hold even when power is cut, and safe operation during power outages.
- Operates with the same power supply and allows easy selection of holding torque.
- Ideal for devices requiring safe stop, such as lifting and vertical transport.

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Product Overview

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK	-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK	-
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK	LINK
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	*	*	LINK
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	*	*	LINK
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-	-

*: Scheduled to be released after web production in March 26th

Outline Drawing

Link Pages which have outerline dimension, wiring,technical data are available. Please refer to the page top " Product Description ".

◇ Motor & Gearhead Set

◇ Fan-Attached Type

Specification Table

～ Please select the model and parameters according to the options below before placing your order.

Part Number
Type・Flange Size

－

Shaft End Shape

－

Input Voltage /
Number of Poles

－

Additional Option
Fan / Terminal Box Type

－

Additional Option
Gearhead Selection

－

Additional Option
Gear Ratio

EA-BM

5040

EA-BM

5120

－

■ Motor Body

❶	❷			❸	❹
Type	No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Fan


Brake motor EA-BM	2006	□60	6	GN：GN Gear A：Round	〈4poles〉 A: Single 110V、50/60Hz、4poles E: Single 110/120V、60Hz、4poles C: Single 220/230V、50Hz、4poles H: Single 220/230V、60Hz、4poles S: Three 200/220/230V、50/60Hz、4poles S3: Three 380/400/415V、50/60Hz、4poles	none
	3015	□70	15			none
	4025	□80	25			none
	5040	□90	40			none
	5060		60	GN、GU、A		F：With fan
	5090		90	GU：GU Gear A：Round		F：With fan
	5120		120			F：With fan
	6120	□104	120			F：With fan
	6140		140			F：With fan
	6200		200			F：With fan

All safety certifications are obtained based on the model number indicated on the motor nameplate.

This product is equipped with a built-in thermal protector (self-reset type).

If the motor overheats for any reason, the protector will automatically activate and stop the motor.
Once the motor temperature decreases, it will automatically reset and restart.
Always ensure the power is turned off before performing any inspection or maintenance work.

For “-A” models with a 110V specification, please refer to the actual motor nameplate for the correct capacitor rating.

■ Gearhead (available as an additional machining option)
* Additional machining can be specified only when selecting shaft types GN or GU.


Alterations Code	No	Flange Size	Gear Ratio
Alterations Code	No	Flange Size	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
GH	2	□60	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	3	□70	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	4	□80	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	5	□90	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	6	□104	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200

※Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}

Specification Overview

❶ ❷			❸	❹
Type No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					[V]	[Hz]	[A]	[mN・m]	[mN・m]	[r/min]	[μF]
EA-BM2006	□60	6	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.265	60	48	1,200	4.0
				-A	1ph 100	60	0.232	55	40	1,450	4.0
				-E	1ph 110	60	0.185	45	40	1,450	2.5
				-E	1ph 120	60	0.200	45	40	1,450	2.5
				-C	1ph 220	50	0.145	55	48	1,200	1.0
				-C	1ph 230	50	0.150	55	48	1,200	1.0
				-H	1ph 220	60	0.145	60	40	1,450	1.0
				-H	1ph 230	60	0.150	60	40	1,450	1.0
				-S	3ph 220	50	0.076	85	48	1,200	-
				-S	3ph 220	60	0.065	70	40	1,450	-
				-S3	3ph 380	50	0.044	85	48	1,200	-
				-S3	3ph 380	60	0.038	70	40	1,450	-
EA-BM3015	□70	15	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.40	110	125	1,200	7.0
				-A	1ph 100	60	0.56	105	105	1,450	7.0
				-E	1ph 110	60	0.43	85	105	1,450	6.0
				-E	1ph 120	60	0.42	85	105	1,450	6.0
				-C	1ph 220	50	0.23	110	125	1,200	1.5
				-C	1ph 230	50	0.23	110	125	1,200	1.5
				-H	1ph 220	60	0.20	85	105	1,450	1.5
				-H	1ph 230	60	0.20	90	105	1,450	1.5
				-S	3ph 220	50	0.14	220	125	1,200	-
				-S	3ph 220	60	0.12	180	105	1,450	-
				-S3	3ph 380	50	0.08	220	125	1,200	-
				-S3	3ph 380	60	0.06	180	105	1,450	-
EA-BM4025	□80	25	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.59	160	200	1,250	10.0
				-A	1ph 100	60	0.69	140	165	1,550	10.0
				-E	1ph 110	60	0.45	140	165	1,550	8.0
				-E	1ph 120	60	0.50	140	165	1,550	8.0
				-C	1ph 220	50	0.29	140	200	1,250	2.2
				-C	1ph 230	50	0.30	160	200	1,250	2.2
				-H	1ph 220	60	0.35	140	165	1,550	2.2
				-H	1ph 230	60	0.35	140	165	1,550	2.2
				-S	3ph 220	50	0.19	350	200	1,250	-
				-S	3ph 220	60	0.17	250	165	1,550	-
				-S3	3ph 380	50	0.11	350	200	1,250	-
				-S3	3ph 380	60	0.10	250	165	1,550	-
EA-BM5040	□90	40	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.78	300	315	1,250	15.0
				-A	1ph 100	60	1.05	300	260	1,550	15.0
				-E	1ph 110	60	0.79	260	260	1,550	12.0
				-E	1ph 120	60	0.80	260	260	1,550	12.0
				-C	1ph 220	50	0.45	270	315	1,250	3.0
				-C	1ph 230	50	0.45	270	315	1,250	3.0
				-H	1ph 220	60	0.45	270	260	1,550	3.0
				-H	1ph 230	60	0.45	270	260	1,550	3.0
				-S	3ph 220	50	0.30	800	315	1,250	0.3
				-S	3ph 220	60	0.25	660	250	1,600	0.3
				-S3	3ph 380	50	0.17	800	315	1,250	0.3
				-S3	3ph 380	60	0.14	660	250	1,600	0.3
EA-BM5060	□90	60	〈Pinion〉 -GN -GU 〈Round〉 -A	-A	1ph 100	50	1.26	470	470	1,250	25.0
				-A	1ph 100	60	1.70	470	380	1,550	25.0
				-E	1ph 110	60	1.05	330	380	1,550	15.0
				-E	1ph 120	60	1.05	380	380	1,550	15.0
				-C	1ph 220	50	0.55	420	470	1,250	4.5
				-C	1ph 230	50	0.60	460	470	1,250	4.5
				-H	1ph 220	60	0.55	420	380	1,550	4.5
				-H	1ph 230	60	0.60	460	380	1,550	4.5
				-S	3ph 220	50	0.45	1,000	470	1,250	-
				-S	3ph 220	60	0.40	800	380	1,550	-
				-S3	3ph 380	50	0.26	1,000	470	1,250	-
				-S3	3ph 380	60	0.23	800	380	1,550	-
EA-BM5090	□90	90	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	1.78	600	700	1,250	30.0
				-A	1ph 100	60	2.35	600	570	1,550	30.0
				-E	1ph 110	60	1.72	550	570	1,550	25.0
				-E	1ph 120	60	1.72	600	570	1,550	25.0
				-C	1ph 220	50	0.82	560	700	1,250	6.0
				-C	1ph 230	50	0.81	560	700	1,250	6.0
				-H	1ph 220	60	0.81	560	570	1,550	6.0
				-H	1ph 230	60	0.80	560	570	1,550	6.0
				-S	3ph 220	50	0.60	1,350	700	1,250	-
				-S	3ph 220	60	0.55	1,100	570	1,550	-
				-S3	3ph 380	50	0.35	1,350	700	1,250	-
				-S3	3ph 380	60	0.32	1,100	570	1,550	-
EA-BM5120	□90	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	2.25	700	930	1,250	35.0
				-A	1ph 100	60	2.85	700	750	1,550	35.0
				-E	1ph 110	60	1.90	650	750	1,550	30.0
				-E	1ph 120	60	1.90	720	750	1,550	30.0
				-C	1ph 220	50	1.00	650	930	1,250	7.0
				-C	1ph 230	50	0.95	650	930	1,250	7.0
				-H	1ph 220	60	1.00	600	750	1,550	7.0
				-H	1ph 230	60	0.95	600	750	1,550	7.0
				-S	3ph 220	50	0.70	1,850	930	1,250	-
				-S	3ph 220	60	0.60	1,600	750	1,550	-
				-S3	3ph 380	50	0.40	1,850	930	1,250	-
				-S3	3ph 380	60	0.35	1,600	750	1,550	-
EA-BM6120	□104	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	2.1	600	930	1,250	35.0
				-A	1ph 100	60	2.5	600	750	1,550	35.0
				-E	1ph 110	60	1.7	600	750	1,550	30.0
				-E	1ph 120	60	1.8	600	750	1,550	30.0
				-C	1ph 220	50	0.95	750	930	1,250	8.0
				-C	1ph 230	50	0.95	750	930	1,250	8.0
				-H	1ph 220	60	0.95	700	750	1,550	8.0
				-H	1ph 230	60	1	700	750	1,550	8.0
				-S	3ph 220	50	0.75	2,200	890	1,250	-
				-S	3ph 220	60	0.7	2,000	730	1,550	-
				-S3	3ph 380	50	0.43	2,200	890	1,250	-
				-S3	3ph 380	60	0.4	2,000	730	1,550	-
EA-BM6140	□104	140	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	2.7	700	1,080	1,250	35.0
				-A	1ph 100	60	3	700	870	1,550	35.0
				-E	1ph 110	60	1.8	700	850	1,550	25.0
				-E	1ph 120	60	1.95	700	850	1,550	25.0
				-C	1ph 220	50	1.05	850	1,040	1,250	10.0
				-C	1ph 230	50	1.15	850	1,040	1,250	10.0
				-H	1ph 220	60	1.05	750	850	1,550	10.0
				-H	1ph 230	60	1.15	750	850	1,550	10.0
				-S	3ph 220	50	0.85	2,700	1,080	1,250	-
				-S	3ph 220	60	0.75	2,200	870	1,550	-
				-S3	3ph 380	50	0.49	2,700	1,080	1,250	-
				-S3	3ph 380	60	0.43	2,200	870	1,550	-
EA-BM6200	□104	200	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	3.2	900	1,385	1,250	45.0
				-A	1ph 100	60	3.5	900	1,120	1,550	45.0
				-E	1ph 110	60	2.75	850	1,120	1,550	35.0
				-E	1ph 120	60	2.65	850	1,120	1,550	35.0
				-C	1ph 220	50	1.4	1,100	1,385	1,250	12.0
				-C	1ph 230	50	1.4	1,100	1,385	1,250	12.0
				-H	1ph 220	60	1.4	1,000	1,120	1,550	12.0
				-H	1ph 230	60	1.4	1,000	1,120	1,550	12.0
				-S	3ph 220	50	1.2	3,400	1,385	1,250	-
				-S	3ph 220	60	1	2,700	1,120	1,550	-
				-S3	3ph 380	50	0.69	3,400	1,385	1,250	-
				-S3	3ph 380	60	0.58	2,700	1,120	1,550	-

○ Allowable Torque When a Gearhead Is Mounted

Please purchase gearheads and mid-gearheads either by specifying additional machining for the motor or from the standalone product page (AC Motor Gearhead EA Series).
When the additional machining code GH is specified, the gear ratio is entered in the box (□) within the model number.
Combinations shown in the yellow cells ( )indicate that the output rotation direction is opposite to that of the motor. All other combinations have the same rotation direction.
The rotational speed is a reference value calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual rotational speed decreases by approximately 2–20% from the listed value depending on the load.
If a greater gear ratio than those listed in the table is required, please add a mid-gearhead with a gear ratio of 10 between the motor and the gearhead.
In this case, the allowable torque is 20 N·m.

Type	Allowance Torque Unit
	Gear Ratio		3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	50Hz	Speed r/min	500	417	300	250	200	166	150	120	100	83	75	60	50	41	37	30	25	20	16	15	12.5	10	8.3	7.5
	60Hz	Speed r/min	600	500	360	300	240	200	180	144	120	100	90	72	60	50	45	36	30	24	20	18	15	12	10	9
EA-BM2006 -GN	50Hz	N・m	0.12	0.14	0.19	0.23	0.29	0.35	0.39	0.49	0.58	0.70	0.75	0.88	1.10	1.30	1.39	1.60	1.90	2.40	2.90	3.00	3.00	3.00	3.00	3.00
	50Hz	kgf・cm	1.22	1.43	1.94	2.35	2.96	3.57	3.98	5.00	5.92	7.14	7.65	8.98	11.2	13.3	14.2	16.3	19.4	24.5	29.6	30.0	30.0	30.0	30.0	30.0
	60Hz	N・m	0.10	0.12	0.16	0.19	0.24	0.29	0.32	0.41	0.49	0.58	0.62	0.73	0.88	1.10	1.15	1.30	1.60	2.00	2.40	2.60	3.00	3.00	3.00	3.00
	60Hz	kgf・cm	1.02	1.22	1.63	1.94	2.45	2.96	3.26	4.18	5.00	5.92	6.32	7.45	8.98	11.2	11.7	13.3	16.3	20.4	24.5	26.5	30.0	30.0	30.0	30.0
EA-BM3015 -GN	50Hz	N・m	0.30	0.36	0.51	0.61	0.76	0.91	0.97	1.30	1.50	1.80	1.94	2.30	2.70	3.30	3.48	4.10	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	50Hz	kgf・cm	3.06	3.67	5.20	6.22	7.75	9.28	9.90	13.2	15.3	18.3	19.8	23.4	27.5	33.7	35.5	41.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0	50.0
	60Hz	N・m	0.26	0.31	0.43	0.51	0.64	0.77	0.80	1.10	1.30	1.50	1.64	1.90	2.30	2.80	2.88	3.50	4.20	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	60Hz	kgf・cm	2.65	3.16	4.38	5.20	6.53	7.85	8.16	11.2	13.2	15.3	16.7	19.3	23.4	28.5	29.4	35.7	42.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0
EA-BM4025 -GN	50Hz	N・m	0.49	0.58	0.81	0.97	1.20	1.50	1.55	2.00	2.40	2.90	3.17	3.70	4.40	5.30	5.57	6.60	7.90	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	50Hz	kgf・cm	5.00	5.91	8.26	9.89	12.2	15.3	15.8	20.4	24.4	29.6	32.3	37.7	44.9	54.1	56.8	67.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0	80.0
	60Hz	N・m	0.40	0.48	0.67	0.80	10.0	1.20	1.25	1.70	2.00	2.40	2.64	3.00	3.60	4.30	4.49	5.40	6.50	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	60Hz	kgf・cm	4.08	4.89	6.83	8.16	10.2	12.2	12.8	17.3	20.4	24.4	26.9	30.6	36.7	43.8	45.8	55.1	66.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0
EA-BM5040 -GN	50Hz	N・m	0.77	0.92	1.30	1.50	1.90	2.30	2.38	3.20	3.80	4.60	4.88	5.70	6.90	8.30	8.57	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	7.85	9.38	13.2	15.3	19.4	23.4	24.3	32.6	38.7	46.9	49.8	58.1	70.4	84.7	87.4	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.63	0.76	1.10	1.30	1.60	1.90	2.00	2.60	3.20	3.80	4.07	4.70	5.70	6.80	7.19	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	6.42	7.75	11.2	13.2	16.3	19.3	20.4	16.5	32.6	38.7	41.5	47.9	58.1	69.3	73.4	87.7	100	100	100	100	100	100	100	100
EA-BM5060 -GN	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.57	4.80	5.70	6.80	7.03	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.4	48.9	58.1	69.3	71.7	87.7	100	100	100	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	2.99	3.80	4.60	5.50	5.70	6.90	8.30	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.5	38.7	46.9	56.1	58.2	70.4	84.7	100	100	100	100	100	100	100	100	100	100	100
EA-BM5060 -GU	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.61	4.80	5.70	6.80	7.12	8.60	10.0	10.3	11.6	12.4	15.5	18.6	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.8	48.9	58.1	69.3	72.6	87.7	100	105	118	126	158	189	200	200	200	200	200	200
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	3.01	3.80	4.60	5.50	5.73	6.90	8.30	8.30	9.70	10.0	12.5	15.0	18.8	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.7	38.7	46.9	56.1	58.4	70.1	84.7	84.6	98.9	102	127	153	192	200	200	200	200	200
EA-BM5090 -GU	50Hz	N・m	1.70	2.00	2.80	3.40	4.30	5.10	5.31	6.40	7.70	9.20	9.55	11.6	13.9	16.6	18.1	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	17.3	20.4	28.6	34.7	43.9	52.0	54.2	65.3	78.6	93.9	97.4	118	142	169	184	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.40	1.70	2.30	2.80	3.50	4.20	4.43	5.20	6.20	7.50	7.81	9.40	11.3	13.5	14.5	18.8	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	14.3	17.3	23.5	28.6	35.7	42.9	45.2	53.1	63.3	76.5	79.6	95.9	115	128	148	192	200	200	200	200	200	200	200	200
EA-BM5120 -GU	50Hz	N・m	2.30	2.70	3.80	4.50	5.60	6.80	7.01	8.50	10.2	12.2	12.5	15.3	18.4	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	23.4	27.5	38.7	45.9	57.1	69.3	71.5	86.7	104	124	128	156	187	200	200	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.80	2.20	3.00	3.60	4.60	5.50	5.73	6.80	8.20	9.80	10.1	12.4	14.9	17.8	19.5	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	18.3	22.4	30.6	36.7	46.9	56.1	58.5	69.5	83.6	100	103	126	152	181	199	200	200	200	200	200	200	200	200	200
EA-BM6120 -GU	50Hz	N・m	2.22	2.60	3.60	4.30	5.40	6.50	6.42	8.10	9.70	11.7	11.6	14.7	17.6	21.1	23.2	29.4	35.2	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	2.40	26.5	36.7	43.8	55.0	66.3	65.6	87.6	98.8	119	118	149	179	215	236	300	359	400	400	400	400	400	400	400
	60Hz	N・m	1.80	2.10	3.00	3.50	4.40	5.30	5.20	6.70	8.00	9.60	9.40	12.0	14.5	17.3	18.8	24.1	28.9	36.1	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	18.3	21.4	30.6	35.7	44.8	54.0	53.3	68.3	81.6	97.9	95.9	122	148	176	192	245	295	368	400	400	400	400	400	400
EA-BM6140 -GU	50Hz	N・m	2.50	3.00	4.20	5.10	6.30	7.60	7.20	9.50	11.4	13.7	13.0	17.2	20.6	24.7	26.0	34.3	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	25.5	30.6	42.8	52.0	63.2	77.5	73.6	96.9	116	139	133	175	210	252	265	349	400	400	400	400	400	400	400	400
	60Hz	N・m	2.10	2.50	3.40	4.10	5.20	6.20	6.10	7.80	9.30	11.2	11.0	14.0	16.8	20.2	22.0	28.0	33.7	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	21.4	25.5	34.6	41.8	53.0	63.2	62.2	79.5	94.8	114	112	142	171	206	224	285	343	400	400	400	400	400	400	400
EA-BM6200 -GU	50Hz	N・m	3.71	4.46	6.19	7.43	9.28	11.1	11.9	13.9	16.7	20.1	20.8	25.2	30.3	36.3	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	37.9	45.5	63.1	75.8	94.7	114	121	142	171	205	212	257	309	370	400	400	400	400	400	400	400	400	400	400
	60Hz	N・m	2.99	3.59	4.99	5.99	7.49	8.98	9.70	11.2	13.5	16.2	17.2	20.3	24.4	29.3	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	30.6	36.7	50.9	61.1	76.4	91.7	98.9	115	138	165	175	207	249	299	400	400	400	400	400	400	400	400	400	400

Alterations

Alterations	Gearhead Set Purchase	Mid-Gear Set Purchase
Code	GH	GH10X
Spec.	You can purchase a gearhead set that matches the motor size and gear type. Please check the gearhead specification table to confirm the available gear ratios based on the motor flange number. [ ! ] Available gear ratios: for flange □42 → 1/3 to 1/60, others → 1/3 to 1/200. [Designation method] Gear ratio 1/30 → GH30	You can purchase a mid-gear set that matches the motor size. When combined with a gearhead, a greater gear ratio can be achieved. [ ! ] Only a gear ratio of 1/10 is available. [Designation method] GN10X






1 Code (Price per Code)	Check on Web	Check on Web

*Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}

Product Features

1. Structure and Operating Principle
This product uses a power-off activated type brake.
When voltage is applied to the coil, the armature—previously pressed by a spring—is magnetized and released from the brake rim, allowing the motor to rotate.
Conversely, when the voltage is removed, the spring force pushes the armature against the brake rim, generating frictional force that brakes the motor and brings it to a stop.

2. Features
① Immediately brakes and holds the load when power is cut (Holding torque: 0.05–2.0 N·m).
② Suitable for use as a safety brake in the event of sudden power failure.
③ Designed to withstand frequent forward/reverse operations; the brake can perform up to 6 stopping operations per minute, with a required minimum interval of 3 seconds between each stop.
④ A commutating loop is built into the brake, allowing operation from the same power source as the motor.

The listed values are reference values and may vary depending on operating conditions.
During actual operation, ensure that the motor surface temperature remains below 90°C.

3. Operating Time and Conditions
① Starting time: The sum of the motor starting time and the electric brake release time.
② Braking time: The time required for the motor to come to a complete stop after power is cut.
③ Overrun amount, starting time, and braking time vary depending on usage conditions and load conditions.

: 30; 45; 60

Part Number
EA-BM2006-A-A
EA-BM2006-A-C
EA-BM2006-A-E
EA-BM2006-A-H
EA-BM2006-A-S
EA-BM2006-A-S3
EA-BM2006-GN-A
EA-BM2006-GN-C
EA-BM2006-GN-E
EA-BM2006-GN-H
EA-BM2006-GN-S
EA-BM2006-GN-S3
EA-BM3015-A-A
EA-BM3015-A-C
EA-BM3015-A-E
EA-BM3015-A-H
EA-BM3015-A-S
EA-BM3015-A-S3
EA-BM3015-GN-A
EA-BM3015-GN-C
EA-BM3015-GN-E
EA-BM3015-GN-H
EA-BM3015-GN-S
EA-BM3015-GN-S3
EA-BM4025-A-A
EA-BM4025-A-C
EA-BM4025-A-E
EA-BM4025-A-H
EA-BM4025-A-S
EA-BM4025-A-S3
EA-BM4025-GN-A
EA-BM4025-GN-C
EA-BM4025-GN-E
EA-BM4025-GN-H
EA-BM4025-GN-S
EA-BM4025-GN-S3
EA-BM5040-A-A
EA-BM5040-A-C
EA-BM5040-A-E
EA-BM5040-A-H
EA-BM5040-A-S
EA-BM5040-A-S3
EA-BM5040-GN-A
EA-BM5040-GN-C
EA-BM5040-GN-E
EA-BM5040-GN-H
EA-BM5040-GN-S
EA-BM5040-GN-S3
EA-BM5060-A-A-F
EA-BM5060-A-C-F
EA-BM5060-A-E-F
EA-BM5060-A-H-F
EA-BM5060-A-S3-F
EA-BM5060-A-S-F
EA-BM5060-GN-A-F
EA-BM5060-GN-C-F
EA-BM5060-GN-E-F
EA-BM5060-GN-H-F
EA-BM5060-GN-S3-F
EA-BM5060-GN-S-F

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Square Flange Dim. A (mm)	Rated Output (W)	Power Supply	Voltage (V)	Shaft End Shape	Fan	Frequency (Hz)
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	100	Round Shaft	None	50/60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	220/230	Round Shaft	None	50
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	110/120	Round Shaft	None	60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	220/230	Round Shaft	None	60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	3-phase	220	Round Shaft	None	50/60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	3-phase	380	Round Shaft	None	50/60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	100	GN Type Spline Shaft	None	50/60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	220/230	GN Type Spline Shaft	None	50
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	110/120	GN Type Spline Shaft	None	60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	1-phase	220/230	GN Type Spline Shaft	None	60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	3-phase	220	GN Type Spline Shaft	None	50/60
MYR 303.10	1 Piece(s)	Available	13 Day(s)	10	60	6	3-phase	380	GN Type Spline Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	100	Round Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	220/230	Round Shaft	None	50
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	110/120	Round Shaft	None	60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	220/230	Round Shaft	None	60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	3-phase	220	Round Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	3-phase	380	Round Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	100	GN Type Spline Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	220/230	GN Type Spline Shaft	None	50
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	110/120	GN Type Spline Shaft	None	60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	1-phase	220/230	GN Type Spline Shaft	None	60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	3-phase	220	GN Type Spline Shaft	None	50/60
MYR 348.23	1 Piece(s)	Available	13 Day(s)	10	70	15	3-phase	380	GN Type Spline Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	100	Round Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	220/230	Round Shaft	None	50
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	110/120	Round Shaft	None	60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	220/230	Round Shaft	None	60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	3-phase	220	Round Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	3-phase	380	Round Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	100	GN Type Spline Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	220/230	GN Type Spline Shaft	None	50
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	110/120	GN Type Spline Shaft	None	60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	1-phase	220/230	GN Type Spline Shaft	None	60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	3-phase	220	GN Type Spline Shaft	None	50/60
MYR 391.29	1 Piece(s)	Available	13 Day(s)	10	80	25	3-phase	380	GN Type Spline Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	100	Round Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	220/230	Round Shaft	None	50
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	110/120	Round Shaft	None	60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	220/230	Round Shaft	None	60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	3-phase	220	Round Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	3-phase	380	Round Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	100	GN Type Spline Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	220/230	GN Type Spline Shaft	None	50
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	110/120	GN Type Spline Shaft	None	60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	1-phase	220/230	GN Type Spline Shaft	None	60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	3-phase	220	GN Type Spline Shaft	None	50/60
MYR 442.23	1 Piece(s)	Available	13 Day(s)	10	90	40	3-phase	380	GN Type Spline Shaft	None	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	100	Round Shaft	Available	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	220/230	Round Shaft	Available	50
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	110/120	Round Shaft	Available	60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	220/230	Round Shaft	Available	60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	3-phase	380	Round Shaft	Available	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	3-phase	220	Round Shaft	Available	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	100	GN Type Spline Shaft	Available	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	220/230	GN Type Spline Shaft	Available	50
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	110/120	GN Type Spline Shaft	Available	60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	1-phase	220/230	GN Type Spline Shaft	Available	60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	3-phase	380	GN Type Spline Shaft	Available	50/60
MYR 509.34	1 Piece(s)	Available	13 Day(s)	10	90	60	3-phase	220	GN Type Spline Shaft	Available	50/60

Basic Information

Type	Motor Only	Motor Type	Brake motor	Gear Head Type	Not Provided
Environment	Standard	Type	Brake Motor	T-BOX (Terminal Box)	None
Number of Poles	4 Poles

Configure

126 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Square Flange Dim. A(mm)
60

70

80

90

104
Clear
Rated Output(W)
6

15

25

40

60

90

120

140

200
Clear
Power Supply
1-phase

3-phase
Clear
Voltage(V)
100

110/120

220

220/230

380
Clear
Shaft End Shape
- GN Type Spline Shaft
- GU Type Spline Shaft
- Round Shaft
Clear
Fan
- Available
- None
Clear
Frequency(Hz)
- 50
- 50/60
- 60
Clear
type
- EA-BM
Clear
CAD
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Small AC Brake Motors 6-200W

Basic Information

Configure

Specification/Dimensions

Square Flange Dim. A(mm)

Rated Output(W)

Power Supply

Voltage(V)

Shaft End Shape

Fan

Frequency(Hz)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm