(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Plug Gauges / Screw Gauges
| Days to Ship |
|
|---|
-
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).
2 types are available, one for testing and the other for work.Standard Price: MYR 538.30- Days to Ship: 4 Day(s) or more -
Limit Thread Plug Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.
· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.
· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.Standard Price: MYR 468.06- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
[Features]
· The limit plain gauge is a gauge that has one measuring surface based on the maximum actual hole size and another measuring surface based on the minimum actual hole size.
■ Through Side Plug Gauge
· This gauge is for inspection of whether the diameter of the hole is larger than the regulated largest object size, and must be able to pass easily through the full length of the hole.
■ Blind Plug Gauge
· This gauge is for inspection of whether the diameter of the hole is smaller than the regulated smallest object size, and must not enter the hole.Standard Price: MYR 283.75- Days to Ship: 4 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Class 2 (former JIS standard compliant)
·Thread gauge, metric threadStandard Price: MYR 745.84- Days to Ship: 5 Day(s) or more -
Parallel Pipe Thread Limit Plug Gauge (G)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.Standard Price: MYR 901.85- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
A screw gauge used for inspecting unified screw threads (coarse).
Standard Price: MYR 1,190.21- Days to Ship: 6 Day(s) or more -
SOKUHANSHA
Thread gauge is used to testing unified threads (fine thread), and confirms accuracy by managing limit of product thread with "go/no-go."
Standard Price: MYR 538.30- Days to Ship: 4 Day(s) or more -
Limit Screw Plug Gauge ISO Plug
DAIICHISOKUHAN
Plug gauge compatible with ISO standards
[Features]
· Using a screw gauge to determine pass/fail of parallel screws, this limit type is the most general method.
· In order to judge the acceptability of product screws, inspection is conducted using the Go and No Go side gauges, demonstrating high precision.Standard Price: MYR 739.40- Days to Ship: 4 Day(s) or more -
Tapered Thread Gauge (R) For Piping, Plug Gauge
DAIICHISOKUHAN
[Features]
· This gauge is used for inspecting bindings requiring a certain level of density, which are used for connection of pipes, fittings, etc.
· A passing result is obtained when the end face is within the notch marks given on the gauge.
· This tapered thread gauge is used for R (Rc, Rp) inspections as stipulated in JIS B 0203.
· Note that a PT model is also available and R is different than PT.Standard Price: MYR 1,491.56- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 1,445.32- Days to Ship: 4 Day(s) or more -
Tapered Pipe Thread Gauge (NPT)
SOKUHANSHA
[Features]
· American standard (ANSI) pipe taper thread gauge used for inspecting pipe taper threads (NPT) for general components requiring sealing.
· These gauges come with various notching; however, the one most commonly used has notches in 3 locations: minimum position, reference position and maximum position.
· When a gauge is screwed in by hand to a pipe taper screw, if the pipe end is within the range of the maximum limit position and minimum limit position notch, it will pass.
· For NPT, the height of the ridge cutout for the screw outer and inner diameters are regulated; using an NPT plane taper gauge for this inspection is recommended.
· Dimensional inspection of outer or inner diameter can be easily performed by aligning the three notches on the taper thread gauge and the six notches on the plain taper gauge.Standard Price: MYR 3,474.70- Days to Ship: 6 Day(s) or more -
Taper Thread Gauge (TG) for Pipes, Taper Thread (NPT) for American Style Pipes Plug
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 1,332.61- Days to Ship: 5 Day(s) or more -
Tapered Pipe Thread Plug Gauge
SOKUHANSHA
[Features]
· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.
· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.
· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.
· The difference from the conventional pipe taper thread gauge PT is as follows.
· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.
· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).Standard Price: MYR 1,143.78- Days to Ship: 4 Day(s) or more -
MORIMOTO_SHAFT
[Features]
· Plug gauge is for inspecting inner diameter dimension of holes.
· A gauge that has one measuring surface based on the maximum allowable hole size and another measuring end surface based on the minimum allowable hole size.Standard Price: MYR 156.98- Days to Ship: 4 Day(s) or more -
Limit Screw Ring Gauge for Old JIS Ring Test
DAIICHISOKUHAN
Classic ring gauge for inspections that supports previous JIS standards
Standard Price: MYR 1,445.32- Days to Ship: 6 Day(s) or more -
Parallel Threading Ring Gauge For Piping (Go And No-Go Set)
DAIICHISOKUHAN
[Features]
· This gauge is used to inspect threading used in mechanical couplings which do not require a certain level of density.
· This set includes both a Go Ring (GR) and No-Go Ring (NR).Standard Price: MYR 2,820.67- Days to Ship: 6 Day(s) or more -
Limit Screw Plug Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Standard Price: MYR 469.18- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).
2 types are available, one for testing and the other for work.
Hardness is HRC58 to 62.Standard Price: MYR 1,107.51- Days to Ship: 6 Day(s) or more -
DAIICHISOKUHAN
The limit gauge for holes is a gauge that has one measuring surface based on the minimum actual hole size and another measuring surface based on the maximum actual hole size.
Standard Price: MYR 382.30- Days to Ship: 6 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Plug
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
· Metric threadStandard Price: MYR 378.18- Days to Ship: 4 Day(s) or more -
Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified) Ring
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 1,986.22- Days to Ship: 4 Day(s) or more -
Tapered Thread Gauge (PT) For Piping, Plug Gauge
DAIICHISOKUHAN
Tapered thread gauge used for R (Rc, Rp) testing specified in JIS B0203, and single tapered pipe thread (PT) plug gauge for pipes.
When flange is within range of notch on gauge, it will pass.Standard Price: MYR 1,151.72- Days to Ship: 4 Day(s) or more -
Parallel Thread Gauge (LG) (G) A Grade JIS (ISO Certified) for Pipes Plug
OSG
[Features]
·Thread gauge for the Class A in JIS standards (ISO class).
Thread type: Parallel pipe thread: Accuracy: AStandard Price: MYR 1,265.76- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring
OSG
[Features]
·Limit gauge Whitworth thread for the Class 2 (former JIS standard-compliant).Standard Price: MYR 1,258.33- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Plug
OSG
[Features]
·Class 2 (former JIS standard compliant)
·Left-hand thread, limit gauge, metric threadStandard Price: MYR 474.74- Days to Ship: 9 Day(s) or more -
Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) Ring
OSG
[Features]
· Screw gauge used for inspecting tapered pipe screws and for testing parallel female screws that fit to tapered screws.Standard Price: MYR 1,540.57- Days to Ship: 9 Day(s) or more -
Set of Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes
OSG
[Features]
· American standard (ANSI) pipe taper thread gauge.Standard Price: MYR 3,308.31- Days to Ship: 9 Day(s) or more -
Parallel Thread Gauge (LG) (PS) (Conventional JIS) for Pipes Plug
OSG
Conventionally JIS standard compliant.
Thread type: Parallel pipe thread: Product type: Thread plug gaugeStandard Price: MYR 578.72- Days to Ship: 5 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug
OSG
Product type: Thread plug gauge
Thread type: Metric thread Accuracy: 5HStandard Price: MYR 433.89- Days to Ship: 9 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring
OSG
Product type: Thread plug gauge
Thread type: Metric thread Accuracy: 4HStandard Price: MYR 857.25- Days to Ship: 9 Day(s) or more -
Limit Screw Ring Gauge for Making Old JIS Ring
DAIICHISOKUHAN
Classic ring gauge for machining that supports previous JIS standards
Standard Price: MYR 1,445.32- Days to Ship: 6 Day(s) or more -
Limit Screw Ring Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Standard Price: MYR 938.37- Days to Ship: 6 Day(s) or more -
Limit Plug Gauge H7 (for Making)
NIIGATASEIKI
A plug gauge for inspecting the accuracy of hole diameters with the Go and No Go sides.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references, for obtaining fit compatibility between the hole and the shaft.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.Standard Price: MYR 792.41- Days to Ship: 4 Day(s) or more -
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_b$)
OSG
[Features]
·Thread gauge for the Class 2A accuracy (former JIS standard-compliant), unified thread.Standard Price: MYR 1,087.50- Days to Ship: 9 Day(s) or more -
Parallel Threading Plug Gauge For Piping (Go Only)
DAIICHISOKUHAN
[Features]
· This gauge is used to inspect threading used in mechanical couplings which do not require a certain level of density.
· This is a plug gauge for one side of a Go Plug (GP).Standard Price: MYR 737.74- Days to Ship: 6 Day(s) or more -
Thread Limit Plug Gauge (ISO-Compliant JIS Standard Specification) GPNP
NIIGATASEIKI
Essential instrument for checking thread accuracy. Thread gauge enabling easy checking of thread accuracy on the GO and NOGO sides.
[Features]
· Testing using predetermined upper and lower limit dimensional accuracy of screw parts.
ISO system JIS standard specification.
· The conventional JIS standard classifies NOGO sides into "for testing" and "for manufacturing", but the ISO-compliant JIS standard is simplified, without classification.
· The screw thread is judged to have passed if the GO gauge goes through without any difficulties and the NOGO gauge does not thread more than 2 complete revolutions.
· With inspection report
[Applications]
· For screw thread inspection.Standard Price: MYR 689.42- Days to Ship: 4 Day(s) or more -
Thread Limit Ring Gauge Set, Conventional JIS For Manufacturing (GRWR)
NIIGATASEIKI
Essential instrument for checking thread accuracy. Thread gauge enabling easy checking of thread accuracy on the GO and NOGO sides.
[Features]
· Testing using predetermined upper and lower limit dimensional accuracy of screw parts.
Conventional JIS standard class 2 gauge for manufacturing.
· The screw thread is judged to have passed if the GO gauge goes through without any difficulties and the NOGO gauge does not thread more than 2 complete revolutions.
· With inspection report
[Applications]
· For screw thread inspection.Standard Price: MYR 1,355.86- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 3 (former JIS standard-compliant).
Accuracy: 3
Thread type: Metric threadStandard Price: MYR 745.84- Days to Ship: 5 Day(s) or more -
Screw Limit Gauge (LG), Whitworth (W) Screw, Left Thread, Class 2 (Old JIS), Ring
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Accuracy: 2
Left thread: ○
Thread type: Whitworth threadStandard Price: MYR 1,570.29- Days to Ship: 9 Day(s) or more -
Standard Screw Gauge (SG) Metric (M) Screw J Class Set Plug
OSG
[Features]
· An accurately made gauge based on standard screw pitch and standard screw dimensions.Standard Price: MYR 378.18- Days to Ship: 9 Day(s) or more -
Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring
OSG
[Features]
・ For pre-plating.
Accuracy: 2-0.03
Thread type: Metric threadStandard Price: MYR 938.95- Days to Ship: 9 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_b$)
OSG
[Features]
·Left-hand thread Fitting class: Middle
Accuracy: 6 G
Thread type: Metric threadStandard Price: MYR 953.81- Days to Ship: 9 Day(s) or more -
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Plug](//my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431690.jpg?$product_view_b$)
Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Plug
OSG
[Features]
Fitting class: Middle
Accuracy: 5H, 6H
Thread type: Metric threadStandard Price: MYR 378.18- Days to Ship: 5 Day(s) or more -
Abrasion Inspection Screw Plug Gauge (LCG), Metric (M) Screw, Class 2 (Former JIS)
OSG
[Features]
·Thread gauge for the Class 2 (former JIS standard-compliant).
Thread type: Metric thread Symbol: GW
Accuracy: 2Standard Price: MYR 562.44- Days to Ship: 5 Day(s) or more -
Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes
OSG
[Features]
·Thread gauge for the Class A (former JIS standard-compliant).
Thread type: Parallel pipe threadStandard Price: MYR 1,146.92- Days to Ship: 9 Day(s) or more
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_b$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Plug](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431690.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Nominal |
| Pitch P |
| Workpiece |
| Class |
| Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | OSG | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | DAIICHISOKUHAN | DAIICHISOKUHAN | DAIICHISOKUHAN | SOKUHANSHA | OSG | SOKUHANSHA | MORIMOTO_SHAFT | DAIICHISOKUHAN | DAIICHISOKUHAN | SOKUHANSHA | SOKUHANSHA | DAIICHISOKUHAN | OSG | OSG | DAIICHISOKUHAN | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | DAIICHISOKUHAN | SOKUHANSHA | NIIGATASEIKI | OSG | DAIICHISOKUHAN | NIIGATASEIKI | NIIGATASEIKI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Ring | Taper Thread Gauge (TG) for Pipes, Taper Thread (NPT) for American Style Pipes Plug | Screw Limit Gauge (LG), Metric (M) Screw, Class 2 (Old JIS), Plug | Taper Thread Gauge(TG) and Taper Thread (R) JIS (ISO Certified) Ring | Parallel Thread Gauge (LG) (G) A Grade JIS (ISO Certified) for Pipes Plug | Screw Limit Gauge (LG), Whitworth (W) Screw, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, Class 2 (Old JIS), Plug | Taper Thread Gauge(TG) and Taper Thread Gauge(PT) (Conventional JIS) Ring | Set of Taper Thread Gauge(TG) for Pipes and Taper (NPT) Thread for American Style Pipes | Parallel Thread Gauge (LG) (PS) (Conventional JIS) for Pipes Plug | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring | Thread Limit Plug Gauge (ISO-Compliant JIS Standard Specification) GPNP | Thread Limit Ring Gauge Set, Conventional JIS For Manufacturing (GRWR) | Screw Limit Gauge (LG), Metric (M) Screw, Class 3 (Old JIS), Ring | Screw Limit Gauge (LG), Whitworth (W) Screw, Left Thread, Class 2 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw, for Pre-Plating, Class 2 -0.03 (Old JIS), Ring | Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Plug | Abrasion Inspection Screw Plug Gauge (LCG), Metric (M) Screw, Class 2 (Former JIS) | Ring A Grade (Conventional JIS) Parallel Thread Gauge(LG) (PF) for Pipes | |||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more |
| Product Type | Thread Plug Gauge | Thread Plug Gauge | Limit Plug Gauge | Thread ring gauge | Thread Plug Gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | - | Thread ring gauge | Thread ring gauge / Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Limit Plug Gauge | Thread ring gauge | - | Thread Plug Gauge | Thread ring gauge | - | Thread Plug Gauge | Thread ring gauge | - | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge / Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Limit Plug Gauge | Thread ring gauge | - | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge |
| Nominal | 0.073-Inch models ～ 2 inches | 1.4 ～ 60 | 2 ～ 50 | M1X0.2 ～ M130X6 | 1 ～ 7/8 | 0.073-Inch models ～ 2 inches | NO.10 ～ 1.5 Inch | 2 ～ 16 | 1 ～ 3/8 | 2 ～ 16 | 1 ～ 4 | 1-11-1/2NPT ～ 4-8NPT | 1 ～ 3/8 | φ3 ～ φ25 | 2 ～ 20 | 1/2 ～ 3/8 | 1.6 ～ 20 | 0.073-Inch models ～ 1.5-Inch models | 1 ～ 50 | M1X0.2 ～ M130X6 | R1-11 ～ R3/8-19 | 1 ～ 3/8 | G1-11 ～ G7/8-14 | W1-8 ～ W9/16-12 | M1.4X0.3-L ～ M30X3.5-L | PT1-11 ～ PT7/8-14 | 1-11-1/2NPT ～ 4-8NPT | PS1-11 ～ PS7/8-14 | M2X0.4 ～ M36X4 | M2X0.4 ～ M36X4 | 2 ～ 20 | 1.4 ～ 20 | φ 31 ～ φ40 | 1-5/8-8UN ～ 4-1/2-8UN | 1/2 ～ 3/8 | M3 ～ M12 | M6 ～ M10 | M2X0.4 ～ M16X2 | W1-8-L ～ W7/8-9-L | M1.4X0.3 ～ M60X5.5 | M2X0.4 ～ M20X2.5 | M1.4X0.3-L ～ M30X3.5-L | M1X0.2 ～ M50X3 | M1.4X0.3 ～ M30X3.5 | PF1-11 ～ PF7/8-14 |
| Pitch P | Ridge 4.5 ～ Ridge 64 | 0.25 ～ 3.5 | - | - | Ridge 11 ～ Ridge 28 | Ridge 4.5 ～ Ridge 64 | 12 ～ 72 | 0.4 ～ 1.75 | 11 ～ 28 | 0.4 ～ 1.75 | Ridge 8 ～ Ridge 27 | - | Ridge 11 ～ Ridge 28 | - | 0.4 ～ 2.5 | 14 ～ 28 | 0.35 ～ 2.5 | Ridge 12 ～ Ridge 72 | - | 0.2 ～ 6 | - | 11 ～ 28 | - | - | - | - | - | - | - | - | 0.4 ～ 2.5 | 0.3 ～ 2.5 | - | - | 14 ～ 19 | 0.5 ～ 1.75 | 1 ～ 1.25 | - | - | - | - | - | - | - | - |
| Workpiece | Female Thread | Female Thread | - | - | Female Thread | Male thread | Female Thread | Female Thread | - | Male thread | Female Thread/Male Screw Set | - | Female Thread | - | Male thread | - | Female Thread | Male thread | - | Female Thread | - | - | - | - | - | - | - | - | - | - | Male thread | Male thread | - | - | - | Female Thread | Male thread | - | - | - | - | - | - | - | - |
| Class | 2B | Class 2 | H7 | - | - | 2A | 2B | 6H | - | 6g | - | - | - | - | For JIS Grade 2 Screw | A ～ B | 6H | 2A | H7 | 2 | - | - | - | - | - | - | - | - | - | - | For JIS Grade 2 Screw | 6g ～ 6h | H7 | - | - | 6H | Class 2 | - | - | - | - | - | - | - | - |
| Standard | - | JIS Standard | - | - | - | - | - | Other | - | Other | - | - | - | - | JIS Standard | - | - | - | - | JIS Standard | - | - | - | - | - | - | - | - | - | - | JIS Standard | - | - | - | - | JIS Standard | JIS Standard | - | - | - | - | - | - | - | - |
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Plug](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978690_002.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Fine], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223004978702_002.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Unified (U) Screw [Special Number of Screw Threads: UN], Class 2A (Old JIS), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223006813139.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Metric (M) Screw, Left Thread, [Fitting Classification: Medium], JIS (ISO Grade), Ring](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431667.jpg?$product_view_c$)
![Screw Limit Gauge (LG), Metric (M) Screw [Fitting Classification: Medium], JIS (ISO Grade), Plug](http://my.misumi-ec.com/linked/material/fs/OSG1/PHOTO/223000431690.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Nominal
- NO0-80UNF
- 0.073-Inch models
- 0.086-Inch models
- 0.099-Inch models
- NO.10
- NO.1
- No.10-32UNF
- No.10-24UNC
- 0.112-Inch models
- 0.1155
- NO.12
- No.12-28UNF
- No.12-24UNC
- 0.125-Inch models
- 0.138-Inch models
- 0.164-Inch models
- 0.19-Inch models
- NO.2
- 0.216-Inch models
- 0.25-Inch models
- 0.25 Inch
- NO.3
- 0.3125-Inch models
- 0.3125 Inch
- 0.375-Inch models
- 0.375 Inch
- NO.4
- No.4-40UNC
- 0.4375-Inch models
- 0.4375 Inch
- 0.5-Inch models
- 0.5 Inch
- NO.5
- No.5-40UNC
- 0.5625-Inch models
- 0.5625 Inch
- NO.6
- No.6-40UNF
- No.6-32UNC
- 0.625-Inch models
- 0.625 Inch
- 0.6875-Inch models
- 0.75-Inch models
- 0.75 Inch
- NO.8
- No.8-36UNF
- No.8-32UNC
- 0.875-Inch models
- 0.875 Inch
- 1
- 1-Inch models
- 1
- 1 Inch
- 1 inch
- M1
- NO1-72UNF
- NO1-64UNC
- 1-14UNS
- 1-12UNF
- G1-11
- PF1-11
- PS1-11
- PT1-11
- R1-11
- 1-11-1/2NPT
- 1-11-1/2NPTF
- 1-8UNC
- W1-8
- W1-8-L
- W1-7/8-4-1/2
- 1-5/8-8UN
- W1-5/8-5
- 1-5/16-12UN
- 1-3/4
- PF1-3/4-11
- PS1-3/4-11
- PT1-3/4-11
- 1-3/4-8UN
- 1-3/4-5UNC
- W1-3/4-5
- 1-3/8-12UNF
- 1-3/8-8UN
- 1-3/8-6UNC
- W1-3/8-6
- 1-3/16-12UN
- 1-1/2
- 1-1/2-12UNF
- G1-1/2-11
- PF1-1/2-11
- PS1-1/2-11
- PT1-1/2-11
- R1-1/2-11
- 1-1/2-11-1/2NPT
- 1-1/2-11-1/2NPTF
- 1-1/2-8UN
- 1-1/2-6UNC
- W1-1/2-6
- 1-1/4
- 1-1/4-12UNF
- G1-1/4-11
- PF1-1/4-11
- PS1-1/4-11
- PT1-1/4-11
- R1-1/4-11
- 1-1/4-11-1/2NPT
- 1-1/4-11-1/2NPTF
- 1-1/4-8UN
- 1-1/4-7UNC
- W1-1/4-7
- 1-1/8
- 1-1/8-12UNF
- PF1-1/8-11
- PS1-1/8-11
- 1-1/8-8UN
- 1-1/8-7UNC
- W1-1/8-7
- 1-1/16-12UN
- M1X0.2
- M1X0.25
- 1 1/2
- 1 1/4
- 1 1/8
- 1/2
- 1/2-32UN
- 1/2-20UNF
- 1/2-14NPT
- 1/2-14NPTF
- G1/2-14
- PF1/2-14
- PS1/2-14
- PT1/2-14
- R1/2-14
- 1/2-13UNC
- W1/2-12
- W1/2-12-L
- 1 3/4
- 1/4
- SM1/4-40
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- W1/4-20
- W1/4-20-L
- G1/4-19
- PF1/4-19
- PS1/4-19
- PT1/4-19
- R1/4-19
- 1/4-18NPT
- 1/4-18NPTF
- 1/8
- SM1/8-44
- SM1/8-40
- W1/8-40
- G1/8-28
- PF1/8-28
- PS1/8-28
- PT1/8-28
- R1/8-28
- 1/8-27NPT
- 1/8-27NPTF
- 1/16
- W1/16-60
- PT1/16-28
- R1/16-28
- 1/16-27NPT
- 1/16-27NPTF
- M1.1X0.2
- M1.1X0.25
- 1.125-Inch models
- 1.125 Inch
- M1.2X0.2
- M1.2X0.25
- 1.25-Inch models
- 1.25 Inch
- 1.375-Inch models
- 1.375 Inch
- 1.4
- M1.4
- M1.4X0.2
- M1.4X0.3
- M1.4X0.3-L
- 1.5-Inch models
- 1.5 Inch
- 1.5 inches
- 1.6
- M1.6X0.2
- M1.6X0.35
- 1.7
- M1.7X0.2
- M1.7X0.35
- M1.7X0.35-L
- 1.75-Inch models
- 1.8
- M1.8X0.2
- M1.8X0.35
- 2
- 2
- 2 inches
- M2
- NO2-64UNF
- NO2-56UNC
- G2-11
- PF2-11
- PS2-11
- PT2-11
- R2-11
- 2-11-1/2NPT
- 2-11-1/2NPTF
- 2-8UN
- 2-4-1/2UNC
- W2-4-1/2
- 2-1/2
- PF2-1/2-11
- PS2-1/2-11
- PT2-1/2-11
- 2-1/2-8NPT
- 2-1/2-8UN
- PF2-1/4-11
- PS2-1/4-11
- M2X0.25
- M2X0.4
- M2X0.4-L
- 2 1/2
- 2 1/4
- 2 3/4
- 2.2
- M2.2X0.25
- M2.2X0.45
- 2.3
- M2.3
- M2.3X0.25
- M2.3X0.4
- 2.5
- M2.5
- M2.5X0.35
- M2.5X0.45
- M2.5X0.45-L
- 2.6
- M2.6
- M2.6X0.35
- M2.6X0.45
- M2.6X0.45-L
- 3
- 3
- M3
- φ3
- NO3-56UNF
- NO3-48UNC
- PF3-11
- PS3-11
- PT3-11
- 3-8NPT
- 3-8UN
- 3-1/2
- PF3-1/2-11
- PT3-1/2-11
- 3-1/2-8NPT
- 3-1/2-8UN
- M3X0.35
- M3X0.5
- M3X0.5-L
- M3X0.6
- M3X0.6-L
- 3 1/2
- 3/4
- 3/4-16UNF
- 3/4-14NPT
- 3/4-14NPTF
- G3/4-14
- PF3/4-14
- PS3/4-14
- PT3/4-14
- R3/4-14
- 3/4-10UNC
- W3/4-10
- W3/4-10-L
- 3/8
- 3/8-32UNEF
- 3/8-24UNF
- G3/8-19
- PF3/8-19
- PS3/8-19
- PT3/8-19
- R3/8-19
- 3/8-18NPT
- 3/8-18NPTF
- 3/8-16UNC
- W3/8-16
- W3/8-16-L
- SM3/16-32
- SM3/16-28
- W3/16-24
- SM3/32-56
- 3.5
- M3.5
- M3.5X0.35
- M3.5X0.6
- 4
- 4
- M4
- φ4
- NO4-48UNF
- NO4-40UNC
- PF4-11
- PT4-11
- 4-8NPT
- 4-8UN
- 4-3/4-8UN
- 4-1/2-8UN
- M4X0.5
- M4X0.7
- M4X0.7-L
- M4X0.75
- M4X0.75-L
- 4.5
- M4.5X0.5
- M4.5X0.75
- 5
- 5
- M5
- φ5
- NO5-44UNF
- NO5-40UNC
- PT5-11
- M5X0.5
- M5X0.75
- M5X0.8
- M5X0.8-L
- M5X0.9
- M5X0.9-L
- 5/8
- 5/8-24UNEF
- 5/8-18UNF
- G5/8-14
- PF5/8-14
- PS5/8-14
- PT5/8-14
- 5/8-11UNC
- W5/8-11
- W5/8-11-L
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- W5/16-18
- W5/16-18-L
- 5.5
- M5.5X0.5
- M5.5X0.75
- M5.5X0.9
- 6
- 6
- M6
- φ6
- NO6-40UNF
- NO6-32UNC
- M6X0.5
- M6X0.75
- M6X1
- M6X1.0
- M6X1-L
- 7
- 7
- M7
- φ7
- M7X0.5
- M7X0.75
- M7X1
- M7X1-L
- 7/8
- 7/8-14UNF
- G7/8-14
- PF7/8-14
- PS7/8-14
- PT7/8-14
- 7/8-9UNC
- W7/8-9
- W7/8-9-L
- 7/16-20UNF
- 7/16-14UNC
- W7/16-14
- 8
- 8
- M8
- φ8
- NO8-36UNF
- NO8-32UNC
- M8X0.5
- M8X0.75
- M8X1
- M8X1.25
- M8X1.25-L
- 9
- 9
- φ9
- M9X0.5
- M9X0.75
- M9X1
- M9X1.25
- M9X1.25-L
- 9/16-18UNF
- 9/16-12UNC
- W9/16-12
- SM9/64-40
- 10
- M10
- φ10
- NO10-32UNF
- NO10-24UNC
- M10X0.5
- M10X0.75
- M10X1
- M10X1.25
- M10X1.25-L
- M10X1.5
- M10X1.5-L
- 11
- φ11
- M11X0.5
- M11X0.75
- M11X1
- M11X1.25
- M11X1.5
- M11X1.5-L
- SM11/64-40
- 12
- M12
- φ12
- NO12-28UNF
- NO12-24UNC
- M12X0.5
- M12X0.75
- M12X1
- M12X1.25
- M12X1.25-L
- M12X1.5
- M12X1.5-L
- M12X1.75
- M12X1.75-L
- 13
- φ13
- M13X0.5
- M13X0.75
- M13X1
- M13X1.25
- M13X1.5
- M13X1.75
- 14
- M14
- φ14
- M14X0.5
- M14X0.75
- M14X1
- M14X1.25
- M14X1.25-L
- M14X1.5
- M14X1.5-L
- M14X2
- M14X2-L
- 15
- φ15
- M15X0.5
- M15X0.75
- M15X1
- M15X1.5
- M15X2
- SM15/64-28
- 16
- M16
- φ16
- M16X0.5
- M16X0.75
- M16X1
- M16X1.25
- M16X1.5
- M16X1.5-L
- M16X2
- M16X2-L
- 17
- φ17
- M17X0.75
- M17X1
- M17X1.5
- 18
- M18
- φ18
- M18X0.5
- M18X0.75
- M18X1
- M18X1.5
- M18X1.5-L
- M18X2
- M18X2.5
- M18X2.5-L
- 19
- φ19
- M19X1
- M19X1.5
- M19X2.5
- 20
- M20
- φ20
- M20X0.5
- M20X1
- M20X1.25
- M20X1.5
- M20X1.5-L
- M20X2
- M20X2.5
- M20X2.5-L
- 21
- φ21
- 22
- M22
- φ22
- M22X0.5
- M22X1
- M22X1.5
- M22X1.5-L
- M22X2
- M22X2.5
- M22X2.5-L
- 23
- φ23
- 24
- M24
- φ24
- M24X0.5
- M24X1
- M24X1.5
- M24X1.5-L
- M24X2
- M24X3
- M24X3-L
- 25
- φ25
- M25X0.5
- M25X1
- M25X1.5
- M25X2
- 26
- φ26
- M26X0.5
- M26X1
- M26X1.5
- M26X1.5-L
- M26X2
- M26X3
- 27
- M27
- φ 27
- M27X1
- M27X1.5
- M27X1.5-L
- M27X2
- M27X3
- M27X3-L
- 28
- φ28
- M28X0.5
- M28X1
- M28X1.25
- M28X1.5
- M28X1.5-L
- M28X2
- M28X3
- 29
- φ29
- 30
- M30
- φ30
- M30X0.5
- M30X1
- M30X1.5
- M30X1.5-L
- M30X2
- M30X3
- M30X3.5
- M30X3.5-L
- 31
- φ 31
- 32
- φ32
- M32X0.5
- M32X1
- M32X1.5
- M32X2
- M32X3
- 33
- M33
- φ33
- M33X1.5
- M33X2
- M33X3
- M33X3.5
- 34
- φ34
- M34X0.5
- M34X1
- M34X1.5
- M34X2
- 35
- φ35
- M35X1.5
- M35X3
- 36
- M36
- φ 36
- M36X0.5
- M36X1
- M36X1.5
- M36X2
- M36X3
- M36X4
- 37
- φ37
- 38
- φ38
- M38X0.5
- M38X1
- M38X1.5
- M38X2
- M38X3
- 39
- M39
- φ39
- M39X1.5
- M39X2
- M39X3
- M39X4
- 40
- φ40
- M40X1
- M40X1.5
- M40X2
- M40X3
- 41
- 42
- M42
- M42X1
- M42X1.5
- M42X2
- M42X3
- M42X4
- M42X4.5
- 43
- 44
- 45
- M45X1
- M45X1.5
- M45X2
- M45X3
- M45X4
- M45X4.5
- 46
- M46X1.5
- 47
- 48
- M48X1
- M48X1.5
- M48X2
- M48X3
- M48X4
- M48X5
- 49
- 50
- M50X1
- M50X1.5
- M50X2
- M50X3
- 52
- M52X1.5
- M52X2
- M52X3
- M52X4
- M52X5
- M54X4
- 55
- M55X1.5
- M55X2
- M55X3
- M55X4
- 56
- M56X1.5
- M56X2
- M56X3
- M56X4
- M56X5.5
- 58
- M58X1.5
- M58X2
- M58X3
- M58X4
- 60
- M60X1.5
- M60X2
- M60X3
- M60X4
- M60X5.5
- M62X1.5
- M62X2
- M62X3
- M62X4
- M64X1.5
- M64X2
- M64X3
- M64X4
- M64X6
- M65X1.5
- M65X2
- M65X3
- M65X4
- M68X1.5
- M68X2
- M68X3
- M68X4
- M68X6
- M70X1.5
- M70X2
- M70X3
- M70X4
- M70X6
- M72X1.5
- M72X2
- M72X3
- M72X4
- M72X6
- M75X1.5
- M75X2
- M75X3
- M75X4
- M76X1.5
- M76X2
- M76X3
- M76X4
- M76X6
- M78X2
- M80X1.5
- M80X2
- M80X3
- M80X6
- M82X2
- M85X1.5
- M85X2
- M85X3
- M85X4
- M90X1.5
- M90X2
- M90X3
- M90X4
- M90X6
- M95X1.5
- M95X2
- M95X3
- M95X4
- M95X6
- M100X1.5
- M100X2
- M100X3
- M100X4
- M100X6
- M105X2
- M105X6
- M110X2
- M110X3
- M115X2
- M115X4
- M120X2
- M120X3
- M125X2
- M125X4
- M130X2
- M130X3
- M130X6
-
Pitch P
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- Ridge 4.5
- 5
- Ridge 5
- 5.5
- 6
- Ridge 6
- Ridge 7
- Ridge 8
- Ridge 9
- Ridge 10
- 11
- Ridge 11
- Ridge 11 1/2
- 12
- Ridge 12
- Ridge 13
- 14
- Ridge 14
- 16
- Ridge 16
- 18
- Ridge 18
- 19
- Ridge 19
- 20
- Ridge 20
- 24
- Ridge 24
- Ridge 27
- 28
- Ridge 28
- 32
- Ridge 32
- 36
- Ridge 36
- 40
- Ridge 40
- 44
- Ridge 44
- 48
- Ridge 48
- 56
- Ridge 56
- 64
- Ridge 64
- 72
- Ridge 72
-
Workpiece
-
Class
-
Standard
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Plug Gauges / Screw Gauges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy