(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SOKUHANSHA Plug Gauges / Screw Gauges
| Days to Ship |
|
|---|
-
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).
2 types are available, one for testing and the other for work.Standard Price: MYR 538.30- Days to Ship: 4 Day(s) or more -
Limit Thread Plug Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.
· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.
· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.Standard Price: MYR 468.06- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
[Features]
· The limit plain gauge is a gauge that has one measuring surface based on the maximum actual hole size and another measuring surface based on the minimum actual hole size.
■ Through Side Plug Gauge
· This gauge is for inspection of whether the diameter of the hole is larger than the regulated largest object size, and must be able to pass easily through the full length of the hole.
■ Blind Plug Gauge
· This gauge is for inspection of whether the diameter of the hole is smaller than the regulated smallest object size, and must not enter the hole.Standard Price: MYR 283.75- Days to Ship: 4 Day(s) or more -
Parallel Pipe Thread Limit Plug Gauge (G)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.Standard Price: MYR 901.85- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
A screw gauge used for inspecting unified screw threads (coarse).
Standard Price: MYR 1,190.21- Days to Ship: 6 Day(s) or more -
SOKUHANSHA
Thread gauge is used to testing unified threads (fine thread), and confirms accuracy by managing limit of product thread with "go/no-go."
Standard Price: MYR 538.30- Days to Ship: 4 Day(s) or more -
Tapered Pipe Thread Gauge (NPT)
SOKUHANSHA
[Features]
· American standard (ANSI) pipe taper thread gauge used for inspecting pipe taper threads (NPT) for general components requiring sealing.
· These gauges come with various notching; however, the one most commonly used has notches in 3 locations: minimum position, reference position and maximum position.
· When a gauge is screwed in by hand to a pipe taper screw, if the pipe end is within the range of the maximum limit position and minimum limit position notch, it will pass.
· For NPT, the height of the ridge cutout for the screw outer and inner diameters are regulated; using an NPT plane taper gauge for this inspection is recommended.
· Dimensional inspection of outer or inner diameter can be easily performed by aligning the three notches on the taper thread gauge and the six notches on the plain taper gauge.Standard Price: MYR 3,474.70- Days to Ship: 6 Day(s) or more -
Tapered Pipe Thread Plug Gauge
SOKUHANSHA
[Features]
· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.
· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.
· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.
· The difference from the conventional pipe taper thread gauge PT is as follows.
· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.
· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).Standard Price: MYR 1,143.78- Days to Ship: 4 Day(s) or more -
Limit Screw Plug Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Standard Price: MYR 469.18- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
Thread gauge used for testing unified threads (coarse).
2 types are available, one for testing and the other for work.
Hardness is HRC58 to 62.Standard Price: MYR 1,107.51- Days to Ship: 6 Day(s) or more -
Limit Screw Ring Gauges, ISO Method JISB0251/0252
SOKUHANSHA
[Features]
· Uses the limit system, the most common method for parallel screw gauges, in which the accuracy is guaranteed by managing the limit of the product screws for through/blind.
· There are two basic limit types: the ISO classification gauge type and the conventional JIS classification gauge type.
· The conventional JIS gauge system distinguished inspection and machining on the gauge no-go side, but the ISO gauge system is simplified, removing this distinction.
· Scissors-type gauge for exterior use is the same.Standard Price: MYR 938.37- Days to Ship: 6 Day(s) or more -
Limit Thread Ring Gauge JIS B0251 and 0252 (Annex)
SOKUHANSHA
[Features]
· The gauge classifications for screw limit gauge are determined with the same grades as the screws to be measured.
· This gauge is called a limit thread gauge since it uses the upper limit and lower limit of the predetermined dimension accuracy of the screw part using 2 screws with different dimensions, through and blind, for inspection.
· For the usage method, a gauge is considered to have passed the grade inspection when the screw thread limit gauge's go gauge can pass through without difficulty and the no-go gauge cannot be screwed in by more than two rotations.
· In addition to mass-producing limit screw gauges according to JIS standards, the manufacturer can also design and manufacture screw gauges to conform with any standard.Standard Price: MYR 936.13- Days to Ship: 4 Day(s) or more -
Parallel Pipe Thread Limit Plug Gauge (PF)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.
· The difference from the conventional pipe parallel thread gauge PF is as follows.
· Classification y/n.
· A screw gauge grade for female screws is not available.
· Male thread gauges are classified as Grade A or Grade B.
· Note that GR is for both Grade A and Grade B.
· The distinction between use for inspection and use for manufacturing has been eliminated for both through and blind sides.
· Determination of pass/fail for thread ring gauge.Standard Price: MYR 831.20- Days to Ship: 6 Day(s) or more -
Tapered Pipe Thread Plug Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is not necessary, for the connection of pipes, parts for pipes, fluidic devices, etc.
Standard Price: MYR 840.61- Days to Ship: 4 Day(s) or more -
Parallel Pipe Thread Limit Ring Gauge (G)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.Standard Price: MYR 1,805.31- Days to Ship: 4 Day(s) or more -
Parallel Pipe Thread Limit Ring Gauge (PF)
SOKUHANSHA
[Features]
· A screw gauge used for inspection of screws (G) primarily for mechanical connections that do not require sealing, newly created by JIS after introduction of the ISO gauge standard.
· The difference from the conventional pipe parallel thread gauge PF is as follows.
· Classification y/n.
· A screw gauge grade for female screws is not available.
· Male thread gauges are classified as Grade A or Grade B.
· Note that GR is for both Grade A and Grade B.
· The distinction between use for inspection and use for manufacturing has been eliminated for both through and blind sides.
· Determination of pass/fail for thread ring gauge.Standard Price: MYR 1,659.01- Days to Ship: 6 Day(s) or more -
Tapered Pipe Thread Ring Gauge
SOKUHANSHA
[Features]
· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.
· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.
· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.
· The difference from the conventional pipe taper thread gauge PT is as follows.
· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.
· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).Standard Price: MYR 1,700.43- Days to Ship: 4 Day(s) or more -
SOKUHANSHA
[Features]
· A tapered screw gauge used for inspection of screws (R, Rc, Rp) primarily for mechanical connections that require sealing, newly established by JIS after introduction of the ISO gauge standard.
· The R and PT product screws are identical in terms of their dimensions, but the gauge systems used are different.
· If the pipe or pipe fitting end are within the range of the gauge notch length, it will pass.
· The difference from the conventional pipe taper thread gauge PT is as follows.
· Wear limit of tapered thread ring gauge: Wear limit has been regulated for the tapered thread ring gauge.
· Inspection plug: Wear limit is inspected with the inspection plug for tapered screws (CP).Standard Price: MYR 2,640.95- Days to Ship: 6 Day(s) or more -
Tapered Pipe Thread Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is required, for the connection of pipes, parts for pipes, fluidic devices, etc.
Standard Price: MYR 2,102.08- Days to Ship: 4 Day(s) or more -
Tapered Pipe Thread Ring Gauge (PT)
SOKUHANSHA
A gauge used for inspecting screws (PT) whose main purpose is mechanical connection where sealing is not necessary, for the connection of pipes, parts for pipes, fluidic devices, etc.
Standard Price: MYR 1,463.75- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Nominal |
| Pitch P |
| Workpiece |
| Class |
| Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA | SOKUHANSHA |
| Product Series | ||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
| Product Type | Thread Plug Gauge | Thread Plug Gauge | Limit Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread Plug Gauge | Thread Plug Gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge | Thread ring gauge / Thread Plug Gauge | Thread ring gauge / Thread Plug Gauge / Standard Thread Gauge | Thread ring gauge |
| Nominal | 0.073-Inch models ～ 2 inches | 1.4 ～ 60 | 2 ～ 50 | 1 ～ 7/8 | 0.073-Inch models ～ 2 inches | NO.10 ～ 1.5 Inch | 1 ～ 4 | 1 ～ 3/8 | 1.6 ～ 20 | 0.073-Inch models ～ 1.5-Inch models | 1.4 ～ 20 | 1.4 ～ 58 | 1 ～ 7/8 | 1 ～ 3/8 | 1 ～ 7/8 | 1 ～ 7/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 4 | 1 ～ 3/8 |
| Pitch P | Ridge 4.5 ～ Ridge 64 | 0.25 ～ 3.5 | - | Ridge 11 ～ Ridge 28 | Ridge 4.5 ～ Ridge 64 | 12 ～ 72 | Ridge 8 ～ Ridge 27 | Ridge 11 ～ Ridge 28 | 0.35 ～ 2.5 | Ridge 12 ～ Ridge 72 | 0.3 ～ 2.5 | 0.25 ～ 3.5 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 | Ridge 11 ～ Ridge 28 |
| Workpiece | Female Thread | Female Thread | - | Female Thread | Male thread | Female Thread | Female Thread/Male Screw Set | Female Thread | Female Thread | Male thread | Male thread | Male thread | Female Thread | Female Thread | Male thread | Male thread | Male thread | Female Thread/Male Screw Set | Female Thread/Male Screw Set | Male thread |
| Class | 2B | Class 2 | H7 | - | 2A | 2B | - | - | 6H | 2A | 6g ～ 6h | Class 2 | - | - | - | - | - | - | - | - |
| Standard | - | JIS Standard | - | - | - | - | - | - | - | - | - | JIS Standard | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
- Thread ring gauge
- Thread Plug Gauge
- Limit Plug Gauge
- Thread Pin Gauge
- Standard Thread Gauge
-
Nominal
- NO0-80UNF
- 0.073-Inch models
- 0.086-Inch models
- 0.099-Inch models
- NO.10
- NO.1
- No.10-32UNF
- No.10-24UNC
- 0.112-Inch models
- 0.1155
- NO.12
- No.12-28UNF
- No.12-24UNC
- 0.125-Inch models
- 0.138-Inch models
- 0.164-Inch models
- 0.19-Inch models
- NO.2
- 0.216-Inch models
- 0.25-Inch models
- 0.25 Inch
- NO.3
- 0.3125-Inch models
- 0.3125 Inch
- 0.375-Inch models
- 0.375 Inch
- NO.4
- No.4-40UNC
- 0.4375-Inch models
- 0.4375 Inch
- 0.5-Inch models
- 0.5 Inch
- NO.5
- No.5-40UNC
- 0.5625-Inch models
- 0.5625 Inch
- NO.6
- No.6-40UNF
- No.6-32UNC
- 0.625-Inch models
- 0.625 Inch
- 0.6875-Inch models
- 0.75-Inch models
- 0.75 Inch
- NO.8
- No.8-36UNF
- No.8-32UNC
- 0.875-Inch models
- 0.875 Inch
- 1
- 1-Inch models
- 1
- 1 Inch
- 1 inch
- M1
- NO1-72UNF
- NO1-64UNC
- 1-14UNS
- 1-12UNF
- G1-11
- PF1-11
- PS1-11
- PT1-11
- R1-11
- 1-11-1/2NPT
- 1-11-1/2NPTF
- 1-8UNC
- W1-8
- W1-8-L
- W1-7/8-4-1/2
- 1-5/8-8UN
- W1-5/8-5
- 1-5/16-12UN
- 1-3/4
- PF1-3/4-11
- PS1-3/4-11
- PT1-3/4-11
- 1-3/4-8UN
- 1-3/4-5UNC
- W1-3/4-5
- 1-3/8-12UNF
- 1-3/8-8UN
- 1-3/8-6UNC
- W1-3/8-6
- 1-3/16-12UN
- 1-1/2
- 1-1/2-12UNF
- G1-1/2-11
- PF1-1/2-11
- PS1-1/2-11
- PT1-1/2-11
- R1-1/2-11
- 1-1/2-11-1/2NPT
- 1-1/2-11-1/2NPTF
- 1-1/2-8UN
- 1-1/2-6UNC
- W1-1/2-6
- 1-1/4
- 1-1/4-12UNF
- G1-1/4-11
- PF1-1/4-11
- PS1-1/4-11
- PT1-1/4-11
- R1-1/4-11
- 1-1/4-11-1/2NPT
- 1-1/4-11-1/2NPTF
- 1-1/4-8UN
- 1-1/4-7UNC
- W1-1/4-7
- 1-1/8
- 1-1/8-12UNF
- PF1-1/8-11
- PS1-1/8-11
- 1-1/8-8UN
- 1-1/8-7UNC
- W1-1/8-7
- 1-1/16-12UN
- M1X0.2
- M1X0.25
- 1 1/2
- 1 1/4
- 1 1/8
- 1/2
- 1/2-32UN
- 1/2-20UNF
- 1/2-14NPT
- 1/2-14NPTF
- G1/2-14
- PF1/2-14
- PS1/2-14
- PT1/2-14
- R1/2-14
- 1/2-13UNC
- W1/2-12
- W1/2-12-L
- 1 3/4
- 1/4
- SM1/4-40
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- W1/4-20
- W1/4-20-L
- G1/4-19
- PF1/4-19
- PS1/4-19
- PT1/4-19
- R1/4-19
- 1/4-18NPT
- 1/4-18NPTF
- 1/8
- SM1/8-44
- SM1/8-40
- W1/8-40
- G1/8-28
- PF1/8-28
- PS1/8-28
- PT1/8-28
- R1/8-28
- 1/8-27NPT
- 1/8-27NPTF
- 1/16
- W1/16-60
- PT1/16-28
- R1/16-28
- 1/16-27NPT
- 1/16-27NPTF
- M1.1X0.2
- M1.1X0.25
- 1.125-Inch models
- 1.125 Inch
- M1.2X0.2
- M1.2X0.25
- 1.25-Inch models
- 1.25 Inch
- 1.375-Inch models
- 1.375 Inch
- 1.4
- M1.4
- M1.4X0.2
- M1.4X0.3
- M1.4X0.3-L
- 1.5-Inch models
- 1.5 Inch
- 1.5 inches
- 1.6
- M1.6X0.2
- M1.6X0.35
- 1.7
- M1.7X0.2
- M1.7X0.35
- M1.7X0.35-L
- 1.75-Inch models
- 1.8
- M1.8X0.2
- M1.8X0.35
- 2
- 2
- 2 inches
- M2
- NO2-64UNF
- NO2-56UNC
- G2-11
- PF2-11
- PS2-11
- PT2-11
- R2-11
- 2-11-1/2NPT
- 2-11-1/2NPTF
- 2-8UN
- 2-4-1/2UNC
- W2-4-1/2
- 2-1/2
- PF2-1/2-11
- PS2-1/2-11
- PT2-1/2-11
- 2-1/2-8NPT
- 2-1/2-8UN
- PF2-1/4-11
- PS2-1/4-11
- M2X0.25
- M2X0.4
- M2X0.4-L
- 2 1/2
- 2 1/4
- 2 3/4
- 2.2
- M2.2X0.25
- M2.2X0.45
- 2.3
- M2.3
- M2.3X0.25
- M2.3X0.4
- 2.5
- M2.5
- M2.5X0.35
- M2.5X0.45
- M2.5X0.45-L
- 2.6
- M2.6
- M2.6X0.35
- M2.6X0.45
- M2.6X0.45-L
- 3
- 3
- M3
- φ3
- NO3-56UNF
- NO3-48UNC
- PF3-11
- PS3-11
- PT3-11
- 3-8NPT
- 3-8UN
- 3-1/2
- PF3-1/2-11
- PT3-1/2-11
- 3-1/2-8NPT
- 3-1/2-8UN
- M3X0.35
- M3X0.5
- M3X0.5-L
- M3X0.6
- M3X0.6-L
- 3 1/2
- 3/4
- 3/4-16UNF
- 3/4-14NPT
- 3/4-14NPTF
- G3/4-14
- PF3/4-14
- PS3/4-14
- PT3/4-14
- R3/4-14
- 3/4-10UNC
- W3/4-10
- W3/4-10-L
- 3/8
- 3/8-32UNEF
- 3/8-24UNF
- G3/8-19
- PF3/8-19
- PS3/8-19
- PT3/8-19
- R3/8-19
- 3/8-18NPT
- 3/8-18NPTF
- 3/8-16UNC
- W3/8-16
- W3/8-16-L
- SM3/16-32
- SM3/16-28
- W3/16-24
- SM3/32-56
- 3.5
- M3.5
- M3.5X0.35
- M3.5X0.6
- 4
- 4
- M4
- φ4
- NO4-48UNF
- NO4-40UNC
- PF4-11
- PT4-11
- 4-8NPT
- 4-8UN
- 4-3/4-8UN
- 4-1/2-8UN
- M4X0.5
- M4X0.7
- M4X0.7-L
- M4X0.75
- M4X0.75-L
- 4.5
- M4.5X0.5
- M4.5X0.75
- 5
- 5
- M5
- φ5
- NO5-44UNF
- NO5-40UNC
- PT5-11
- M5X0.5
- M5X0.75
- M5X0.8
- M5X0.8-L
- M5X0.9
- M5X0.9-L
- 5/8
- 5/8-24UNEF
- 5/8-18UNF
- G5/8-14
- PF5/8-14
- PS5/8-14
- PT5/8-14
- 5/8-11UNC
- W5/8-11
- W5/8-11-L
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- W5/16-18
- W5/16-18-L
- 5.5
- M5.5X0.5
- M5.5X0.75
- M5.5X0.9
- 6
- 6
- M6
- φ6
- NO6-40UNF
- NO6-32UNC
- M6X0.5
- M6X0.75
- M6X1
- M6X1.0
- M6X1-L
- 7
- 7
- M7
- φ7
- M7X0.5
- M7X0.75
- M7X1
- M7X1-L
- 7/8
- 7/8-14UNF
- G7/8-14
- PF7/8-14
- PS7/8-14
- PT7/8-14
- 7/8-9UNC
- W7/8-9
- W7/8-9-L
- 7/16-20UNF
- 7/16-14UNC
- W7/16-14
- 8
- 8
- M8
- φ8
- NO8-36UNF
- NO8-32UNC
- M8X0.5
- M8X0.75
- M8X1
- M8X1.25
- M8X1.25-L
- 9
- 9
- φ9
- M9X0.5
- M9X0.75
- M9X1
- M9X1.25
- M9X1.25-L
- 9/16-18UNF
- 9/16-12UNC
- W9/16-12
- SM9/64-40
- 10
- M10
- φ10
- NO10-32UNF
- NO10-24UNC
- M10X0.5
- M10X0.75
- M10X1
- M10X1.25
- M10X1.25-L
- M10X1.5
- M10X1.5-L
- 11
- φ11
- M11X0.5
- M11X0.75
- M11X1
- M11X1.25
- M11X1.5
- M11X1.5-L
- SM11/64-40
- 12
- M12
- φ12
- NO12-28UNF
- NO12-24UNC
- M12X0.5
- M12X0.75
- M12X1
- M12X1.25
- M12X1.25-L
- M12X1.5
- M12X1.5-L
- M12X1.75
- M12X1.75-L
- 13
- φ13
- M13X0.5
- M13X0.75
- M13X1
- M13X1.25
- M13X1.5
- M13X1.75
- 14
- M14
- φ14
- M14X0.5
- M14X0.75
- M14X1
- M14X1.25
- M14X1.25-L
- M14X1.5
- M14X1.5-L
- M14X2
- M14X2-L
- 15
- φ15
- M15X0.5
- M15X0.75
- M15X1
- M15X1.5
- M15X2
- SM15/64-28
- 16
- M16
- φ16
- M16X0.5
- M16X0.75
- M16X1
- M16X1.25
- M16X1.5
- M16X1.5-L
- M16X2
- M16X2-L
- 17
- φ17
- M17X0.75
- M17X1
- M17X1.5
- 18
- M18
- φ18
- M18X0.5
- M18X0.75
- M18X1
- M18X1.5
- M18X1.5-L
- M18X2
- M18X2.5
- M18X2.5-L
- 19
- φ19
- M19X1
- M19X1.5
- M19X2.5
- 20
- M20
- φ20
- M20X0.5
- M20X1
- M20X1.25
- M20X1.5
- M20X1.5-L
- M20X2
- M20X2.5
- M20X2.5-L
- 21
- φ21
- 22
- M22
- φ22
- M22X0.5
- M22X1
- M22X1.5
- M22X1.5-L
- M22X2
- M22X2.5
- M22X2.5-L
- 23
- φ23
- 24
- M24
- φ24
- M24X0.5
- M24X1
- M24X1.5
- M24X1.5-L
- M24X2
- M24X3
- M24X3-L
- 25
- φ25
- M25X0.5
- M25X1
- M25X1.5
- M25X2
- 26
- φ26
- M26X0.5
- M26X1
- M26X1.5
- M26X1.5-L
- M26X2
- M26X3
- 27
- M27
- φ 27
- M27X1
- M27X1.5
- M27X1.5-L
- M27X2
- M27X3
- M27X3-L
- 28
- φ28
- M28X0.5
- M28X1
- M28X1.25
- M28X1.5
- M28X1.5-L
- M28X2
- M28X3
- 29
- φ29
- 30
- M30
- φ30
- M30X0.5
- M30X1
- M30X1.5
- M30X1.5-L
- M30X2
- M30X3
- M30X3.5
- M30X3.5-L
- 31
- φ 31
- 32
- φ32
- M32X0.5
- M32X1
- M32X1.5
- M32X2
- M32X3
- 33
- M33
- φ33
- M33X1.5
- M33X2
- M33X3
- M33X3.5
- 34
- φ34
- M34X0.5
- M34X1
- M34X1.5
- M34X2
- 35
- φ35
- M35X1.5
- M35X3
- 36
- M36
- φ 36
- M36X0.5
- M36X1
- M36X1.5
- M36X2
- M36X3
- M36X4
- 37
- φ37
- 38
- φ38
- M38X0.5
- M38X1
- M38X1.5
- M38X2
- M38X3
- 39
- M39
- φ39
- M39X1.5
- M39X2
- M39X3
- M39X4
- 40
- φ40
- M40X1
- M40X1.5
- M40X2
- M40X3
- 41
- 42
- M42
- M42X1
- M42X1.5
- M42X2
- M42X3
- M42X4
- M42X4.5
- 43
- 44
- 45
- M45X1
- M45X1.5
- M45X2
- M45X3
- M45X4
- M45X4.5
- 46
- M46X1.5
- 47
- 48
- M48X1
- M48X1.5
- M48X2
- M48X3
- M48X4
- M48X5
- 49
- 50
- M50X1
- M50X1.5
- M50X2
- M50X3
- 52
- M52X1.5
- M52X2
- M52X3
- M52X4
- M52X5
- M54X4
- 55
- M55X1.5
- M55X2
- M55X3
- M55X4
- 56
- M56X1.5
- M56X2
- M56X3
- M56X4
- M56X5.5
- 58
- M58X1.5
- M58X2
- M58X3
- M58X4
- 60
- M60X1.5
- M60X2
- M60X3
- M60X4
- M60X5.5
- M62X1.5
- M62X2
- M62X3
- M62X4
- M64X1.5
- M64X2
- M64X3
- M64X4
- M64X6
- M65X1.5
- M65X2
- M65X3
- M65X4
- M68X1.5
- M68X2
- M68X3
- M68X4
- M68X6
- M70X1.5
- M70X2
- M70X3
- M70X4
- M70X6
- M72X1.5
- M72X2
- M72X3
- M72X4
- M72X6
- M75X1.5
- M75X2
- M75X3
- M75X4
- M76X1.5
- M76X2
- M76X3
- M76X4
- M76X6
- M78X2
- M80X1.5
- M80X2
- M80X3
- M80X6
- M82X2
- M85X1.5
- M85X2
- M85X3
- M85X4
- M90X1.5
- M90X2
- M90X3
- M90X4
- M90X6
- M95X1.5
- M95X2
- M95X3
- M95X4
- M95X6
- M100X1.5
- M100X2
- M100X3
- M100X4
- M100X6
- M105X2
- M105X6
- M110X2
- M110X3
- M115X2
- M115X4
- M120X2
- M120X3
- M125X2
- M125X4
- M130X2
- M130X3
- M130X6
-
Pitch P
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 1
- 1.25
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- Ridge 4.5
- 5
- Ridge 5
- 5.5
- 6
- Ridge 6
- Ridge 7
- Ridge 8
- Ridge 9
- Ridge 10
- 11
- Ridge 11
- Ridge 11 1/2
- 12
- Ridge 12
- Ridge 13
- 14
- Ridge 14
- 16
- Ridge 16
- 18
- Ridge 18
- 19
- Ridge 19
- 20
- Ridge 20
- 24
- Ridge 24
- Ridge 27
- 28
- Ridge 28
- 32
- Ridge 32
- 36
- Ridge 36
- 40
- Ridge 40
- 44
- Ridge 44
- 48
- Ridge 48
- 56
- Ridge 56
- 64
- Ridge 64
- 72
- Ridge 72
-
Workpiece
-
Class
-
Standard
- JIS Standard
- Other
Narrow search by specifying Manufacturer
-
- OSG (63)
- SOKUHANSHA (20)
- DAIICHISOKUHAN (17)
- NIIGATASEIKI (15)
- MORIMOTO_SHAFT (3)
- EISEN (1)
CAD
-
- 2D
- 3D
Related Categories to Plug Gauges / Screw Gauges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy