(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Jigs for Manual Tightening（Page4）
Search by specifying the lower class category
Clamping Parts (for Manual Tightening)
Clamp Units (for Manual Tightening)
Locating Elements (for Positioning Parts / Manual Tightening)
| Days to Ship |
|
|---|
-
NABEYA
Convenient for positioning narrow workpiece parts, or as a stopper, etc. Nuts are included for all products.
Standard Price: MYR 49.48- Days to Ship: 4 Day(s) or more -
NABEYA
Material is FCD450, and heat treatment is yakizen.
Useful for bulking up large workpieces and as a clamp table.Standard Price: MYR 2,516.95 Days to Ship: 12 Day(s) or more -
NABEYA
Material is S50C, Heat treatment is hardening, Surface treatment is black oxide coating.
Helps with positioning.Standard Price: MYR 536.73- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 115.04- Days to Ship: 6 Day(s) or more -
Guide Block (Straight Type)【2 Pieces Per Package】
NABEYA
Can be used where the groove width of the fixed object and table is the same. When the groove width is different, use the E-605 guide block (stepped) and E-275B guide block.
Standard Price: MYR 171.71- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 131.12- Days to Ship: 4 Day(s) or more -
NABEYA
SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.
Standard Price: MYR 103.71- Days to Ship: 4 Day(s) or more -
Reference Seat (Air Hole with Flange Provided)
NABEYA
Specification with air holes can be used to verify seating (O-ring not included). The seating diameter is small, thanks to a space-saving design that makes it possible to use in narrow places.
Standard Price: MYR 288.04- Days to Ship: 4 Day(s) or more -
NABEYA
Material is SCM420, Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).
Standard Price: MYR 214.65- Days to Ship: 6 Day(s) or more -
NABEYA
A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.
Standard Price: MYR 60.01- Days to Ship: 4 Day(s) or more -
Rough Guide L-Plate for Q Lock
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.
Standard Price: MYR 142.30- Days to Ship: 10 Day(s) or more -
Extension Tool for Q Lock (Side Type)
NABEYA
Main body: S45C / Hex joint: SCM440, Hexagonal joint part: Hardened HRC52 to 58 / Joint bar (double-end surface): Induction hardened HRC36 to 44, Q-lock element side operated type extension tool.
Standard Price: MYR 325.40- Days to Ship: 4 Day(s) or more -
Rough Guide for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.
Standard Price: MYR 417.93- Days to Ship: 10 Day(s) or more -
Rough Guide L-Plate for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.
Standard Price: MYR 143.57- Days to Ship: 12 Day(s) or more -
Rough Guide Pin for Q Lock (Side Type)
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.
Standard Price: MYR 170.88- Days to Ship: 10 Day(s) or more -
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Standard Price: MYR 614.51- Days to Ship: 4 Day(s) or more -
Q Lock (Screw Type) Clamp Bushing
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Standard Price: MYR 549.77- Days to Ship: 4 Day(s) or more -
Q Lock (Screw Type) Diamond Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Standard Price: MYR 860.56- Days to Ship: 4 Day(s) or more -
Q Lock (Screw Type) Locating Pin
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Standard Price: MYR 669.37- Days to Ship: 4 Day(s) or more -
Q Lock (Screw Type) Locating Bushing
NABEYA
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.
Standard Price: MYR 603.53- Days to Ship: 4 Day(s) or more -
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.
Standard Price: MYR 820.52- Days to Ship: 10 Day(s) or more -
NABEYA
A pneumatic/hydraulic joint developed for the Q-lock element. Can supply air for seating confirmation from the mother jig to the daughter jig, and also supply hydraulic pressure. The fluid circuit can be easily attached/detached when replacing the jig.
Standard Price: MYR 963.16- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 860.56- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 835.12- Days to Ship: 4 Day(s) or more -
NABEYA
Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.
Standard Price: MYR 178.60- Days to Ship: 4 Day(s) or more -
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.
Standard Price: MYR 278.29- Days to Ship: 10 Day(s) or more -
NABEYA
The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.
Standard Price: MYR 153.51- Days to Ship: 10 Day(s) or more -
NABEYA
Convenient for clamp table and raising blocks of large machinery workpieces.
Standard Price: MYR 3,813.04- Days to Ship: 12 Day(s) or more -
V Block Guide Block【2 Pieces Per Package】
NABEYA
For installation, use E-660 socket screws (sold separately).
Standard Price: MYR 167.74- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 534.84- Days to Ship: 12 Day(s) or more -
Guide Block (Open Type)【2 Pieces Per Package】
NABEYA
After setting the fixed object in the given position, place the guide block in the T-groove to position.
Standard Price: MYR 375.96- Days to Ship: 10 Day(s) or more -
Guide Block (Stepped Type)【2 Pieces Per Package】
NABEYA
It is screw-fastened on a fixed object or vise with 20 mm key groove. Can be used in any machine with varied guide block sizes available.
Standard Price: MYR 527.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 172.81- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 6,479.14- Days to Ship: 12 Day(s) or more -
Flange Locating Pin (Diamond Pin)
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)
Standard Price: MYR 326.75- Days to Ship: 4 Day(s) or more -
Flange Locating Pin (Diamond Pin S)
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)
Standard Price: MYR 387.11- Days to Ship: 12 Day(s) or more -
Locating Pin A Type (Self Cut Product)
NABEYA
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)
Standard Price: MYR 96.13- Days to Ship: 12 Day(s) or more -
Locating Pin A Type (Finishing Product)
NABEYA
Outer diameters A and B have ground finish (finished product)
Standard Price: MYR 199.30- Days to Ship: 6 Day(s) or more -
Locating Pin B Type (Finishing Product)
NABEYA
This product comes with A-type and B-type locating pins with grinding finish.
Standard Price: MYR 251.91- Days to Ship: 12 Day(s) or more -
Locating Pin (Adjustable Round Pin)
NABEYA
[Features]
· A single wrench with the positioning repeatability of 5 μm.
· Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
· The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
· Locating adjustable pin creates zero gap.Standard Price: MYR 649.71- Days to Ship: 6 Day(s) or more -
Locating Pin (Inch Finish Round Pin)
NABEYA
Inch finish used for jigs and components in the aviation industry (φA only). In order to improve the efficiency of driving work, the lead part has undergone finishing grinding in 2 stages. The hardness is set low.
Standard Price: MYR 285.95 Days to Ship: 10 Day(s) or more -
NABEYA
Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.
Standard Price: MYR 243.82- Days to Ship: 6 Day(s) or more -
Locating Pin (Ball DLC Diameter)
NABEYA
Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.
Standard Price: MYR 261.97- Days to Ship: 6 Day(s) or more -
NABEYA
Body: SCM420 / rhombic nut: S45C-D, Hardened HRC56 ±2 locating cylinder (positioning stopper).
Standard Price: MYR 414.19- Days to Ship: 14 Day(s) or more -
NABEYA
Socket screw fixing type positioning pin. Can be used repeatedly. Mounting bolts are sold separately. Use socket screws.
Standard Price: MYR 170.22- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 14 Day(s) or more | 6 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Jigs for Manual Tightening
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy