(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Clamping Parts (for Manual Tightening)
| Days to Ship |
|
|---|
-
MISUMI
Model SJK-K is provided with a through hole in the center of the jack allowing the jack to be fixed by a bolt, etc.
No. E-175A attachment is usable for the SJK type.- Volume Discount
Standard Price: MYR 144.68- Days to Ship: 4 Day(s) or more -
ESCO
ESCO clamping parts (for hand tightening), T-slot bolt.
High clamping force and long lifespan due to rolling thread manufacturingStandard Price: MYR 100.95- Days to Ship: 8 Day(s) or more -
Toggle clamp (Horizontal latch type)
ESCO
Horizontal latch type.
Handle PVC resin coating.
The length of the ring can be adjusted forward and backward by 5 mm.Standard Price: MYR 103.85- Days to Ship: 8 Day(s) or more -
NABEYA
A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.
- CAD ：
- 2D
Standard Price: MYR 3,186.18- Days to Ship: 12 Day(s) or more -
ESCO
[Features]
·Any size combination of steps will fit.
Materials: Hardening steel, abrasion resistant finish
Width: 30 mmStandard Price: MYR 53.08- Days to Ship: 8 Day(s) or more -
Toggle clamp (Latch type for vertical and horizontal use)
ESCO
【Product Specifications】
・Vertical and lateral latch type
・Vertical latch and lateral latch can be switched by changing the shaft hole. (The described dimensions are for lateral latch)
・The catch is not included in -2.
・Capacity…700kg
・Fitting…60 x 51, 28 x 40mmStandard Price: MYR 242.68 Days to Ship: 12 Day(s) or more -
Clamp Support Screw Jack (CSJ)
MISUMI
Convenient for supporting various clamps.
Allows connecting use of 2 or 3 in the case of one screw not being effective or lacking in height.
Use of an attachment allows convenient support for deformed objects.- Volume Discount
Standard Price: MYR 189.02- Days to Ship: 2 Day(s) or more -
MISUMI
Clamping with mold bases is easy. The clamp and step block are connected to prevent losing.
Opening of the oblong hole allows easy attachment and detachment from the side.
Can be adjusted to 4 different heights by changing the position of the step block of the main unit.- Volume Discount
Standard Price: MYR 305.08- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 892.60- Days to Ship: 4 Day(s) or more -
Height Setting Jack (with Magnetic Base)
NABEYA
[Features]
· Hole included in upper center (φ12).
· Attachment for E-756 jack can also be used.
· Bearing is embedded in thread component.
· Includes magnetic base- CAD ：
- 2D
Standard Price: MYR 2,111.76- Days to Ship: 11 Day(s) or more -
ESCO
[Features]
·ESCO Co., Ltd clamping parts (for hand tighten) Plain clamp.
·It takes precision to maintain the balance.
For precision jigs.
·It can be used in combination with step lock.Standard Price: MYR 86.66- Days to Ship: 8 Day(s) or more -
ESCO
【Product Specifications】
・Material-Quenched steel with anti-wear finish
・The product can be used in combination with a step block.
・Screw…M10
・A…15
・B…30
・C…80
・D…15
・E…30Standard Price: MYR 159.89 Days to Ship: 12 Day(s) or more -
ESCO
ESCO clamping parts (for hand tightening), T-slot nut.
[Materials]: Hardening steel (C45)Standard Price: MYR 35.67- Days to Ship: 8 Day(s) or more -
ESCO
[Specifications]
·ESCO Co., Ltd clamping parts (for hand tightening) Hex Nut.
·Strength classification: 10
·Materials: Hardening steelStandard Price: MYR 10.25- Days to Ship: 8 Day(s) or more -
ESCO
[Features]
·ESCO Co., Ltd clamping parts (for hand tightening) flat washers.
·Ideal for more stable tightening.
·Materials: Hardening steelStandard Price: MYR 11.66- Days to Ship: 8 Day(s) or more -
ESCO
【Product Specifications】
・Material-Quenched steel
・For more stable tightening
・Use this product in combination with the EA637GS series.
・Screw…M10
・D1…10.5
・D…21
・H…4.0Standard Price: MYR 11.52- Days to Ship: 8 Day(s) or more -
ESCO
Use in combination with a spherical washer for more stable tightening.
Please use it together with the EA637GR series.Standard Price: MYR 12.92- Days to Ship: 8 Day(s) or more -
ESCO
[Features]
·Nut can be passed straight through to tightening part.
(With lock)
·Materials: Hardening steel (zinc plating)Standard Price: MYR 97.30- Days to Ship: 8 Day(s) or more -
ESCO
【Product Specifications】
・Side hold type
・Tightening capacity-180kg
・Stroke-30mm
・Dim. (width x length x height)-50 x 125 x 98mm
・Fitting-50 x 83mmStandard Price: MYR 177.48 Days to Ship: 12 Day(s) or more -
ESCO
【Product Specifications】
・Side hold type
・Tightening capacity-680kg
・Stroke-60mm
・Dim. (width x length x height)-71 x 238 x 133mm
・Fitting-71 x 51mm
・Ductile steel baseStandard Price: MYR 387.59 Days to Ship: 12 Day(s) or more -
Toggle clamp (Vertical latch type)
ESCO
【Product Specifications】
・Vertical latch type
・Tightening capacity-FA： 225kg, FA-1： 450kg, FA-2： 900kg
・A…31
・B…79
・C…70
・Fitting： E x F…35 x 26Standard Price: MYR 124.18- Days to Ship: 12 Day(s) or more -
Toggle clamp (auto adjust), model: Push-pull type/horizontal holding type
ESCO
【Product Specifications】
・Push-pull type
・Side hold type
・Stroke--1：15mm, -2：25mm
・Clamp-Polyethylene cap
・Material-Steel(nickel plating)
・Auto adjustment function that adjusts tightening automatically according to the workpiece size
・Clamping capacity(kg)-318
・Mounting fitting-57x64mm
・Overall length-225 to 245mmStandard Price: MYR 267.84- Days to Ship: 12 Day(s) or more -
MISUMI
[Features]
·Used for height adjustment of workpiece during machine finishing
·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling
·Materials: S45C (Unhardened steel)
·Height can be specified in 5 mm increments (Height tolerance within ±0.02)Days to Ship: 8 Day(s) or more -
Round Seat, Counter Bores Mounted Model
MISUMI
[Features]
·Used for height adjustment of workpiece during machine finishing
·Can be fixed with bolts
·Since it is raw material, there is no damage to drill even if it interferes with round seat during drilling
·Materials: S45C (Unhardened steel)
·Height can be specified in 5 mm increments (Height tolerance within ±0.02)Days to Ship: 8 Day(s) or more -
High Lock Screw【1-5 Pieces Per Package】
MISUMI
[Features]
·Even if screw is turned, head that comes in contact with workpiece does not rotate, preventing damage to workpiece
·By inserting ball between head part and thread section, cutting force is transmitted to threaded part via ball, making it more difficult to loosen than conventional screws
·Tightening torque is directly converted into clamping force linearly, so fastening is stronger than conventional screws- Volume Discount
Standard Price: MYR 36.84- Days to Ship: 4 Day(s) or more -
NABEYA
Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.
- CAD ：
- 2D
Standard Price: MYR 458.02- Days to Ship: 6 Day(s) or more -
NABEYA
Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.
Standard Price: MYR 179.69- Days to Ship: 6 Day(s) or more -
NABEYA
Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.
Standard Price: MYR 174.07- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 88.05 Days to Ship: 4 Day(s) or more -
Attachment for Clamp Support Jack
NABEYA
[Features]
· The one that fits the workpiece can be selected from the various types of attachments.
· For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.Standard Price: MYR 86.28- Days to Ship: 4 Day(s) or more -
NABEYA
Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.
Standard Price: MYR 268.06- Days to Ship: 6 Day(s) or more -
NABEYA
With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.
- CAD ：
- 2D
Standard Price: MYR 1,285.72- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 484.33 Days to Ship: 6 Day(s) or more -
NABEYA
The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.
- CAD ：
- 2D
Standard Price: MYR 1,264.79- Days to Ship: 11 Day(s) or more -
Standard Price: MYR 118.47 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· The body is made of bainite cast iron and does not get damaged even in excessive tightening.
· Can also be used for metal press clamps and the metal working clamps of injection molding machines.
· If a T-slot nut is used, then of course it can also be used with T-groove tablesStandard Price: MYR 153.48- Days to Ship: 4 Day(s) or more -
NABEYA
Mold bases can be clamped very fast. Clamp and step block are connected so they will not become lost. Opened clamp slot allows easy insertion and removal from the side.
Standard Price: MYR 267.78- Days to Ship: 6 Day(s) or more -
Black Oxide Coating Screw Jack (S45C)
NABEYA
· Attachment for No. E-9175A can be used for SJK type.
· SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.Standard Price: MYR 136.49- Days to Ship: 4 Day(s) or more -
NABEYA
Convenient for positioning narrow workpiece parts, or as a stopper, etc. Nuts are included for all products.
Standard Price: MYR 49.48- Days to Ship: 4 Day(s) or more -
NEW STRONG
For height adjustment of workpieces. A set of 2 pcs. Materials: S45C HRC: 35 to 40
Standard Price: MYR 403.67- Days to Ship: 5 Day(s) or more -
NEW STRONG
Suitable for screw support and screw support with magnetic force
Standard Price: MYR 92.49 Days to Ship: 9 Day(s) -
Screw Support with Magnetic Force【1-2 Pieces Per Package】
NEW STRONG
For height adjustment of workpieces. A set of 2 pcs. Materials: S45C HRC: 35 to 40
Standard Price: MYR 1,058.97- Days to Ship: 8 Day(s) or more -
NEW STRONG
It is very useful for clamping large or tall workpieces.
[Applications]
It is used to support clamps and adjust the height of workpieces.Standard Price: MYR 2,578.39- Days to Ship: 10 Day(s) or more -
NEW STRONG
SST-7 & SST-70 have a flat surface (after machining) and support slanted workpieces. SST-8 & SST-80 are cast and forged
Standard Price: MYR 92.81- Days to Ship: 5 Day(s) or more -
NEW STRONG
You can regulate distortion due to clamping of objects being machined because the top part is slanted to fit the shape of the object being machined
Standard Price: MYR 359.25 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | ESCO | ESCO | NABEYA | ESCO | ESCO | MISUMI | MISUMI | NABEYA | NABEYA | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | MISUMI | MISUMI | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NEW STRONG | NEW STRONG | NEW STRONG | NEW STRONG | NEW STRONG | NEW STRONG |
| Product Series | Toggle clamp (auto adjust), model: Push-pull type/horizontal holding type | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 9 Day(s) |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Clamping Parts (for Manual Tightening)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy