(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Jigs for Manual Tightening
Search by specifying the lower class category
Clamping Parts (for Manual Tightening)
Clamp Units (for Manual Tightening)
Locating Elements (for Positioning Parts / Manual Tightening)
| Days to Ship |
|
|---|
-
NABEYA
[Features]
· Adsorption of workpieces is possible by simply supplying air from a compressor.
· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
· VCM0303E.
· Supply valve can only turn the adsorption ON or OFF.
· VCM0303S.
· Adsorption and air blowing are both possible using the changeover switch.
· The current adsorption force can be confirmed by vacuum pressure gauge.
· Adsorption force can be adjusted by vacuum regulatorStandard Price: MYR 11,238.98- Days to Ship: 6 Day(s) or more -
MISUMI
Model SJK-K is provided with a through hole in the center of the jack allowing the jack to be fixed by a bolt, etc.
No. E-175A attachment is usable for the SJK type.- Volume Discount
Standard Price: MYR 144.68- Days to Ship: 4 Day(s) or more -
Clamp Part of Wedge Clamp (For tapped holes)
NABEYA
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.
Standard Price: MYR 422.78- Days to Ship: 4 Day(s) or more -
SUPER TOOL
[Features]
· Ideal for thin workpieces and clamping mass production products.
· Irregular articles can also be clamped with ease.
· Clamping operation is quick and easy.
· The material and hardness are suitable for repeated operation, and the contact surface does not cling to workpieces and clamp rings.Standard Price: MYR 99.58- Days to Ship: 9 Day(s) -
Adjustment Bolt for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 175.12- Days to Ship: 6 Day(s) or more -
ESCO
ESCO clamping parts (for hand tightening), T-slot bolt.
High clamping force and long lifespan due to rolling thread manufacturingStandard Price: MYR 100.95- Days to Ship: 8 Day(s) or more -
Toggle clamp (Horizontal latch type)
ESCO
Horizontal latch type.
Handle PVC resin coating.
The length of the ring can be adjusted forward and backward by 5 mm.Standard Price: MYR 103.85- Days to Ship: 8 Day(s) or more -
NABEYA
[Features]
· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Standard Price: MYR 194.29- Days to Ship: 4 Day(s) or more -
NABEYA
6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.
Standard Price: MYR 369.16- Days to Ship: 6 Day(s) or more -
NABEYA
A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.
- CAD ：
- 2D
Standard Price: MYR 3,186.18- Days to Ship: 12 Day(s) or more -
NABEYA
Slight chamfering is given for φ3 to φ5 and chamfering of C0.3 to 0.5 for φ6 or higher.
Standard Price: MYR 41.03- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 758.32- Days to Ship: 10 Day(s) or more -
Locating Pin B Type (Self Cut Product)
NABEYA
Machine outer diameters A and B according to the tolerance specified by the user. (Self Cut Product)
Standard Price: MYR 116.36- Days to Ship: 12 Day(s) or more -
T-Slot Mini Clamp【2 Pieces Per Package】
NEW STRONG
[Features]
· Ideal for clamping thin workpieces.
· Setup can be completed easily by using the T-groove.
· Simply tighten the enamel screw with a wrench and it is ready to use.Standard Price: MYR 1,643.93- Days to Ship: 10 Day(s) -
ESCO
[Features]
·Any size combination of steps will fit.
Materials: Hardening steel, abrasion resistant finish
Width: 30 mmStandard Price: MYR 53.08- Days to Ship: 8 Day(s) or more -
Toggle clamp (Latch type for vertical and horizontal use)
ESCO
【Product Specifications】
・Vertical and lateral latch type
・Vertical latch and lateral latch can be switched by changing the shaft hole. (The described dimensions are for lateral latch)
・The catch is not included in -2.
・Capacity…700kg
・Fitting…60 x 51, 28 x 40mmStandard Price: MYR 242.68 Days to Ship: 12 Day(s) or more -
Clamp Support Screw Jack (CSJ)
MISUMI
Convenient for supporting various clamps.
Allows connecting use of 2 or 3 in the case of one screw not being effective or lacking in height.
Use of an attachment allows convenient support for deformed objects.- Volume Discount
Standard Price: MYR 189.02- Days to Ship: 2 Day(s) or more -
MISUMI
Clamping with mold bases is easy. The clamp and step block are connected to prevent losing.
Opening of the oblong hole allows easy attachment and detachment from the side.
Can be adjusted to 4 different heights by changing the position of the step block of the main unit.- Volume Discount
Standard Price: MYR 305.08- Days to Ship: 4 Day(s) or more -
Swing Clamp Height Adjusting Support
NABEYA
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.
Standard Price: MYR 344.84- Days to Ship: 4 Day(s) or more -
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
Standard Price: MYR 1,503.53- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 23.56- Days to Ship: 4 Day(s) or more -
NABEYA
Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.
- CAD ：
- 2D
Standard Price: MYR 1,520.39- Days to Ship: 6 Day(s) or more -
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Standard Price: MYR 206.76- Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Side Clamp 6842PL
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 905.61- Days to Ship: 6 Day(s) or more -
Wedge Clamp Stopper Part (For T-shaped grooves)
NABEYA
It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.
Standard Price: MYR 590.61- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 400.85- Days to Ship: 6 Day(s) or more -
Wedge Clamp Set (For tapped holes)
NABEYA
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.
Standard Price: MYR 953.40- Days to Ship: 4 Day(s) or more -
NABEYA
It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.
Standard Price: MYR 1,712.40- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· It can be horizontally swung to attach and remove workpieces.
· Can be used for T-grooves and for tapped holes.
· The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
· Tool-less (with handle).
· Free clamping direction (without guide groove).
· The built-in spring causes it to automatically rise when unclamping.
· Attachments can be mountedStandard Price: MYR 1,820.48- Days to Ship: 4 Day(s) or more -
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Standard Price: MYR 281.41- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· SS400/galvanized toggle down clamp 6832.
· 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Standard Price: MYR 198.66- Days to Ship: 4 Day(s) or more -
NABEYA
Hold down toggle clamp 6833 made of SS400 and zinc plating.
Standard Price: MYR 553.59 Days to Ship: 6 Day(s) or more -
NABEYA
Clamps for fixing workpieces on machining centers, milling machines, etc.
[Features]
·Standard type with T-slot bolt.
[Applications]
·Convenient for fixing the workpiece.- CAD ：
- 2D
Standard Price: MYR 336.44- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 892.60- Days to Ship: 4 Day(s) or more -
Height Setting Jack (with Magnetic Base)
NABEYA
[Features]
· Hole included in upper center (φ12).
· Attachment for E-756 jack can also be used.
· Bearing is embedded in thread component.
· Includes magnetic base- CAD ：
- 2D
Standard Price: MYR 2,111.76- Days to Ship: 11 Day(s) or more -
NABEYA
Because a flange is included, it can be secured with a screw from the top. Dimension A in 0.1 increments and dimension A tolerance specially corresponding to h6, m6 and p6 is possible. It is a standard tip tapered shape. Diamond pin allows selection of the orientation of the diamond. (PFD/PFDS type)
Standard Price: MYR 281.18- Days to Ship: 4 Day(s) or more -
Reference Seat (Flange Provided)
NABEYA
[Features]
· Specification with air holes can be used to verify seating (O-ring not included).
· The diameter of the workpiece support is large, allowing load from the top to be firmly supportedStandard Price: MYR 209.57- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 446.94 Days to Ship: 4 Day(s) or more -
NABEYA
Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.
- CAD ：
- 2D
Standard Price: MYR 4,516.92 Days to Ship: 12 Day(s) or more -
Locating Pin (Adjustable Diameter Pin)
NABEYA
[Features]
· A single wrench with the positioning repeatability of 5 μm.
· Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
· The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
· Locating adjustable pin creates zero gap.Standard Price: MYR 649.71- Days to Ship: 4 Day(s) or more -
NEW STRONG
Use when the height is too low for the A type and too high for the free vise.
Standard Price: MYR 3,664.55- Days to Ship: 8 Day(s) or more -
NEW STRONG
A slotted heel strap clamp with a black oxide coating finish.
Material: S45CStandard Price: MYR 178.00 Days to Ship: 5 Day(s) or more -
NEW STRONG
[Features]
·S45C, HRC35, black oxide coating finish type.
·It can be used with a double-cam handle for a wide range of applications.
[Applications]
·As a presser for workpieces.
·As a jig for clamping.Standard Price: MYR 115.40- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 396.58- Days to Ship: 6 Day(s) or more -
HA-NE Clamp Set With T-Slot Bolt 【2 Pieces Per Package】
FUJI TOOL
[Features]
· Free type with continuously variable fastening ability.
· Doesn't turn a hair even at intense vibrations.
[Applications]
· It is used to press and hold a workpiece or mold from above.Standard Price: MYR 764.10- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | MISUMI | NABEYA | SUPER TOOL | NABEYA | ESCO | ESCO | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NEW STRONG | ESCO | ESCO | MISUMI | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NEW STRONG | NEW STRONG | NEW STRONG | NABEYA | FUJI TOOL |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 12 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Jigs for Manual Tightening
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy