(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Tooling
Search by specifying the lower class category
Shrink Fit Holders
Milling Chucks
Milling Cutter Arbors
Collet Holders
Drill Chucks
Tap Holders
Collets
Tooling-Related Equipment
Presetters
Products for Coolants
| Days to Ship |
|
|---|
-
DAISHOWASEIKI
[Features]·Demonstrates outstanding power at ultra-high speed rotation. [Specifications]·For Mega New Baby Chuck / New Baby Chuck
Standard Price: MYR 342.24- Days to Ship: 1 Day(s) or more -
YUKIWA SEIKO
·For Super G1 Chuck.
·Chucking is possible up to -0.1 mm against the nominal diameter of the collet.
·Minimum order quantity: 1 pc.Standard Price: MYR 321.52- Days to Ship: 8 Day(s) or more -
YUKIWA SEIKO
A drill mill collet boasting heavy duty grip strength, outstanding durability, and high accuracy.
[Features]
· Drill mill collet that boasts outstanding durability and high precision: Made by a collet chuck manufacturer with over 50 years of experience and accumulated technology. The drill mill collet is made with carefully selected materials, excellent heat treatment technology and ultra-high precision finish, guaranteeing high precision and outstanding durability.
· Easy and reliable collet attachment/removal: A notch is made in the thrust ring inside the tightening nut, so tilt the collet and insert or remove through the notch part.
· After screwing the lock nut fitted with collet into the body, insert the tool into the collet and then tighten the lock nut with a wrench.
· Heavy duty grip strength: Drill mill collets adopt a check method due to the double taper, have a longer gripping length than single taper collets, and securely chuck tools.
· In addition, it uses a tightening nut that incorporates a steel pole for powerful grasping force.
· Can be used as a tap holder: Since tapping in machining centers where the spindle rotation and feed are synchronized requires high speed and accuracy, drill milling chucks are often used.Standard Price: MYR 253.66- Days to Ship: 9 Day(s) or more -
15T/S20T/BT30/BT35 New Drill Mill Chuck
YUKIWA SEIKO
High rigidity, high precision drill mill chuck compatible with high pressure coolants
Standard Price: MYR 1,592.78- Days to Ship: 9 Day(s) or more -
"Coolant Liner" (90° Spray Nozzle)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.Standard Price: MYR 21.78- Days to Ship: 5 Day(s) or more -
"Coolant Liner" (Flare)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.Standard Price: MYR 28.13- Days to Ship: 5 Day(s) or more -
Bull Point (Center Through Type)
DAISHOWASEIKI
[Features]
· High-quality durable pull bolt, made using highly reliable materials. A center through typeStandard Price: MYR 195.16- Days to Ship: 11 Day(s) or more -
DAISHOWASEIKI
[Features]
High-quality pull bolt with durability that uses highly reliable materials.
There are JIS standard type, MAS-I type, MAS-II type, and manufacturer's standard.
[Applications]
Ideal for machining, etc.Standard Price: MYR 114.44- Days to Ship: 8 Day(s) or more -
VESSEL
A drill chuck that can be used for various purposes by attaching a drill or a bit to the tip.
[Features]
· For air/electric screwdrivers.
· Outstanding gripping force and high precision.
· Shaft features outstanding durability.
· Key type: Attached key for attaching and detaching tool tips.
· Hybrid-type: Dual type with or without key.
[Applications]
· For buildings, facilities, etc.Standard Price: MYR 134.85- Days to Ship: 9 Day(s) -
"Coolant Liner" (Round Nozzle)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.Standard Price: MYR 19.10- Days to Ship: 5 Day(s) or more -
DAISHOWASEIKI
[Features]
· Quickly wipes off any contamination on the inner-diameter section of the chuck for safe and reliable machiningStandard Price: MYR 182.14- Days to Ship: 9 Day(s) or more -
Semi-Dry Type Oil Cooler "Magic Cut e-Mist Standard Set"
FUSOSEIKI
[Features]
· Semi-dry type lubrication cooling device.
· Enables even ultra-small quantities of oil that cannot be seen by the naked eye to be confirmed at the drop speed of the liquid measure checker during lubrication.
· By controlling the liquid amount, it can be used as needed for semi-dry lubrication or mist lubrication depending on the lubricated item and the application.
· Mounting onto any apparatus is simple.
· Particularly ideal for cutting aluminum and stainless steel.
[Applications]
· For unmanned oil supply to the conveyor.
· For cooling, lubrication, and chip removal for drilling machines, tapping machines, lathes, dedicated machines, milling machines, gear cutters, end mills, reamers, die machines, engraving machines, grinders, etc., and in punching, bending, mold gathering, etc.Standard Price: MYR 469.45- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· It is a cooling method that does not use cutting fluid.
· Cooling air temperature can be lowered up to 31°C below outside temperature.
· Since no machine is used, there is no breakdown and maintenance is easy.
· A cooling device for dry processing applying 'Vortex Theory'.
[Applications]
· For cooling the blade and workpiece during cutting process.Standard Price: MYR 890.76 Days to Ship: 14 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.Standard Price: MYR 396.24- Days to Ship: 5 Day(s) or more -
"Coolant Liner" (Connector)【1-10 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.Standard Price: MYR 19.14- Days to Ship: 5 Day(s) or more -
F Type, Cutout Type Insert Bushing
NT TOOL
[Applications]
· Cutout type insert bushing is used frequently when making the same product in a large quantity or for a long period of time.- CAD ：
- 2D
Standard Price: MYR 102.22- Days to Ship: 6 Day(s) or more -
HSK Shank New High-Power Milling Chuck S Type (A Type)
DAISHOWASEIKI
[Features]
· BIG's original slit mechanism provides high-power and high-precision support for everything from heavy cutting to fine cutting for end mill processing.Standard Price: MYR 2,017.67- Days to Ship: 11 Day(s) -
Accu Center (High-Precision Centering Bar)
DAISHOWASEIKI
[Features]
· High-precision positioning done with a simple mechanical design. Measurements can be completed by simply attaching a probe to the end face of the workpiece.
· Repeatability within 3 μ (vertical type).
· A hard chrome plating of excellent durability has been adopted for the probe.Standard Price: MYR 446.55- Days to Ship: 1 Day(s) or more -
DAISHOWASEIKI
[Features]
· It clamps the HSK flange outer diameter with needle rollers, using a patented original method.
· It can safely tighten tools without damaging the tapered partsStandard Price: MYR 1,795.02- Days to Ship: 8 Day(s) or more -
Drill Holder for Drill Tappers
DAISHOWASEIKI
[Features]
·You can smoothly exchange a drill holder.
·Minimum order quantity: 1 pc.Standard Price: MYR 523.41- Days to Ship: 9 Day(s) or more -
Morse Taper Holder A Type (Tang Type)
DAISHOWASEIKI
[Features]·Stable runout accuracy is achieved through high-precision inner diameter machining. ·Big Plus (BBT shank) tools can be used on Big Plus main shanks and machine with conventional BT main shanks.
Standard Price: MYR 698.71- Days to Ship: 11 Day(s) or more -
KOBAYASHITEKKO
Split jaw type with hard and soft jaws
[Features]
·Ideal for machining, milling machines, drill presses, slotters, gear cutting machines, split tables, etc.
·The handle insertion angle is 30°, so you can operate the handle while it is attached to the table, allowing you to work smoothly.
·The body is thin, so it is possible to process workpieces that were previously impossible to mount. In addition, the thin design allows the center of gravity of the workpiece to be fixed at a lower position relative to the table, allowing for more stable processing.
·The body flange has a U-hole, and can be easily fixed with a T-nut and bolt using the T-slot on the table.
·A unique tapered seal structure is used at the joint between the body and scroll to eliminate seizure caused by the intrusion of dirt and reduce the frequency of lubrication.Standard Price: MYR 11,520.55- Days to Ship: 10 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Mainly installed onto boring machines for attaching drills.Standard Price: MYR 618.30 Days to Ship: 8 Day(s) or more -
Replacement Nozzle for Air Jet
TRUSCO NAKAYAMA
[Features]
· Has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance.Standard Price: MYR 115.73- Days to Ship: 5 Day(s) or more -
Keyless Drill Chuck Precision Grade (Silver)
YUKIWA SEIKO
Keyless type drill chuck allowing drill attachment/detachment with manual rotation alone.
[Features]
· The world's No. 1 accuracy: The ultra-precision class is finished to unparalleled precision by assembling world-class technologies.
· It demonstrates fully sufficient power for high precision machining, such as tooling of machining centers and jig borers, etc.
· The test method for the measurement position conforms to JIS B 4634.
· Maximum accuracy: Precision class maintains accuracy over a long period of time, with the highest accuracy in the world after . Standard Price: MYR 758.13- Days to Ship: 5 Day(s) or more -
Chuck Wrench (For Collet Chuck)
SHOWA TOOL
SEIWA SEIKI TOOLING ACCESSORIES Chuck wrench (for collet chuck).
Standard Price: MYR 88.49- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 110.25 Days to Ship: 6 Day(s) or more -
DAISHOWASEIKI
[Features]
· Cleaner that completely removes dirt on machine spindles and holder boresStandard Price: MYR 128.06- Days to Ship: 9 Day(s) or more -
Point Master (PMC Series/Straight Shank Type)
DAISHOWASEIKI
[Features]
· Instantly transmits touch position with LED lamp and buzzer.
· Notifies reduction of battery life via flashing LED during workpiece measurement.
· A straight shank type.Standard Price: MYR 3,271.41- Days to Ship: 10 Day(s) or more -
NIKKENKOSAKU
[Features]
Positioning can be done easily by applying it to workpiece.
Centering bar with a 60° tip is a special item.Standard Price: MYR 259.29 Days to Ship: 5 Day(s) or more -
VERTEX
[Specifications]
·Collet for milling chuck.
·Collet outer diameter ⌀20, flange diameter ⌀25: C-20-4/C-20-6/C-20-8/C-20-10/C-20-12/C-20-16.
·Collet outer diameter ⌀32, flange diameter ⌀37: C-32-6/C-32-8/C-32-10/C-32-12/C-32-16/C-32-20/C-32-25.
·Collet outer diameter ⌀42, flange diameter ⌀48: C-42-6/C-42-8/C-42-10/C-42-12/C-42-16/C-42-20/C-42-25/C-42-32.Standard Price: MYR 214.72 Days to Ship: 4 Day(s) or more -
Keyless chuck (Integrated MT shank with hook spanner)
TRUSCO NAKAYAMA
[Features]
· Keyless chuck and integrated MT shank reduce the hassle of mounting.
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Chuck arbor is quenched and polished.
[Applications]
· Mainly used mounted on lathes to mount a drill.Standard Price: MYR 662.88- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Replacement nozzle for magnetic coolant and magnet-based coolant.
· Round blow (R type) with flow adjustment nozzle (from 0, stepless).
[Applications]
· For blowing cutting chips in cutting work.Standard Price: MYR 181.19- Days to Ship: 5 Day(s) or more -
HSK Shank Face Mill Arbor H Type A Type
DAISHOWASEIKI
[Features]
· A face mill arbor for cutters that support through-tools, reliably supplying coolant air to the cutting edge.Standard Price: MYR 1,316.45- Days to Ship: 10 Day(s) or more -
MANYO TOOLS
[Features]
· Various types are available, compatible with all sorts of cutters. Can be used for a wide variety of applications, from roughing to finishing.Standard Price: MYR 1,042.92 Days to Ship: 9 Day(s) or more -
MANYO TOOLS
[Features]
·A wide variety of types are available for various cutters.
·Minimum order quantity: 1 pc.
·For SANDVIK and SECO face milling machine. A wide variety of types are available for various cutters.Standard Price: MYR 1,007.15 Days to Ship: 9 Day(s) or more -
MANYO TOOLS
[Features]
· Exerts its strength when the arbor is not quite long enough during deep engraving for moldsStandard Price: MYR 1,154.87- Days to Ship: 9 Day(s) or more -
DAISHOWASEIKI
[Features]
・ Standard type of a flexible arm stand that locks securely with a special and cam mechanism
・ Firmly fixed with a strong magnet
・ Since the movable part is covered with rubber, it shuts out dustStandard Price: MYR 3,040.96 Days to Ship: 9 Day(s) -
DAISHOWASEIKI
[Features]
Center through type.
A side lock drill holder.
·Dual contact
·Spindle/shank type: BBT/BT
·Spindle/shank number: 40,50
·Grip diameter: 16 mm / 20 mm / 25 mm / 32 mm / 40 mm / 50 mm
·Coolant supply system, etc.: center through
·Holder length: 75 mm / 80 mm / 90 mm / 105 mm / 135 mm / 165 mm / 200 mm / 250 mm / 270 mmStandard Price: MYR 1,096.83- Days to Ship: 11 Day(s) -
New High Power Milling Chuck Straight Collet
DAISHOWASEIKI
[Features]
· A dedicated straight collet for the New High Power Milling ChuckStandard Price: MYR 223.28- Days to Ship: 9 Day(s) or more -
DAISHOWASEIKI
[Features]
· Handles interference issues flexibly when combined with the BIG NEW Hi- POWER MILLING CHUCK.
· It enables easy tool layout with a horizontal machining center where workpieces and jigs often interfere.Standard Price: MYR 661.18- Days to Ship: 11 Day(s) -
Face Mill Arbor H Type BT30/BT40/BT50
DAISHOWASEIKI
[Features]
· A face mill arbor for cutters that support through-tool cooling, reliably supplying coolant and air to the cutting edge.Standard Price: MYR 971.95 Days to Ship: 11 Day(s) -
DAISHOWASEIKI
[Features]
Hook-type FK wrench with swing-adjustable RA holder for new high-power milling chucks.Standard Price: MYR 113.06- Days to Ship: 11 Day(s) -
DAISHOWASEIKI
[Features]
· Ideal for a high-speed machining center with ceramic bearings. Instantly detects the reference point even for non-conductive workpieces or machinesStandard Price: MYR 7,063.30- Days to Ship: 11 Day(s) -
Micro Collet (for Mega Micro Chuck)
DAISHOWASEIKI
[Features]
· Grip diameter between φ0.45 and φ6.05 can be selected in increments of 0.1 mm for a perfect fit
· Small yet with excellent grip strength, precision small machining is realized in this product.Standard Price: MYR 348.39- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
| Nozzle Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAISHOWASEIKI | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | DAISHOWASEIKI | DAISHOWASEIKI | VESSEL | TRUSCO NAKAYAMA | DAISHOWASEIKI | FUSOSEIKI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | NT TOOL | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | KOBAYASHITEKKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YUKIWA SEIKO | SHOWA TOOL | SHOWA TOOL | DAISHOWASEIKI | DAISHOWASEIKI | NIKKENKOSAKU | VERTEX | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | DAISHOWASEIKI | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 14 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 11 Day(s) | 1 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 11 Day(s) | 9 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 8 Day(s) or more |
| Spindle types | - | - | - | BT30 | - | - | BT40 / BT50 | BT30 / BT40 / BT50 | - | - | - | - | - | - | - | - | HSK-A | - | - | - | BT40 / BT50 | - | - | - | - | - | - | HSK-A / HSK-E | - | - | - | - | - | HSK-A | BT40 | BT30 | - | - | BT40 / BT50 | - | - | BT40 | - | ST20 / ST32 / BT40 | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 63 ～ 100 | - | - | - | - | - | - | - | - | - | - | 25 ～ 100 | - | - | - | - | - | 63 ～ 100 | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - | drill | - | - | - | - | - | - | - | end mill | - | - | drill | - | - | - | - | - | - | - | - | - | - | - | - | - | Facemill | Facemill | Facemill | - | - | - | - | - | Facemill | - | - | - |
| Retainable blade diameter(mm) | 0.25～0.5 ～ 19.5～20 | 1 ～ 32 | 1.0～0.5 ～ 32.0～31.0 | 0.5～7.0 ～ 3.5～20.0 | - | - | - | - | 0.8～6.5 ～ 1.5～13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.3~3 ～ 3 to 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25～ 6 ～ 2.5 ～20 | - | - | - | 0.45 ～0.55 ～ 7.85～7.95 |
| Product Category | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Heating and Cooling Equipment | Heating and Cooling Equipment | Attachments/Accessories | Attachments/Accessories | Main Body | Heating and Cooling Equipment | Attachments/Accessories | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Heating and Cooling Equipment | Attachments/Accessories | Main Body | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Main Body | Main Body | Attachments/Accessories | Heating and Cooling Equipment | Main Body | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Measuring equipment | Measuring equipment | Attachments/Accessories | Attachments/Accessories | Heating and Cooling Equipment | Main Body | Main Body | Main Body | Attachments/Accessories | Measuring equipment | Main Body | Attachments/Accessories | Main Body | Main Body | Attachments/Accessories | Measuring equipment | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | - | Machining Centers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Machining Centers | Generic Machine | - | - | - | - | - | - | - | - | - | - | - | - | Machining Centers | Machining Centers | - | - | Machining Centers | - | Machining Centers | Generic Machine | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Side lock | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | 45 ～ 120 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 ～ 180 | - | - | - | 44 ～ 96 | - | - | - | - | - | - | - | - | 45 ～ 250 | - | 45 | - | - | 105 ～ 165 | - | - | 60 ～ 90 | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Center Through (Blade Through) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Center Through (Blade Through) | - | - | - | - | Center Through (Blade Through) | - | - | Center Through (Blade Through) | - | - | - |
| Nozzle Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spindle types
-
HSK type
-
Tool Type
-
Retainable blade diameter(mm)
- 0.25～0.5
- 0.25～ 6
- 0.3~3
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.5～0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 to 8
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.55 ～0.65
- 0.65 ～0.75
- 0.75 ～0.85
- 0.75～1
- 0.8～6.5
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1～1.25
- 1.0～10
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5-13
- 1.5～1.0
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.5～13
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2～2.25
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.5～2.75
- 2.5～3
- 2.5 to 13
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.75 ～2.85
- 2.75～3
- 2.75～3.25
- 2.75 to 16.0
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- Up to 3
- 3.0～2.5
- 3～3.25
- 3~3.5
- 3～3.5
- 3–4
- 3–10
- 3 to 12
- 3 to 16
- 3.0～16.0
- M3 to M16
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.5
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5～3.0
- 3.5～3.75
- 3.5～4
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4
- 3.75～4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4～4.25
- 4~4.5
- 4～4.5
- 4–5
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.5
- 4.25～4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.5～4.75
- 4.5～5
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5
- 4.75～5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5～5.25
- 5～5.5
- 5–6
- 5.0～25.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.5
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.5～5.75
- 5.5～6
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- ~6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6～6.5
- 6–7
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5～6.0
- 6.5～7
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5～8
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 8
- 8.0～7.0
- 8~8.5
- 8～8.5
- 8–9
- 8.4～8.5
- 8.5
- 8.5～9
- 8.9～9.0
- 9
- 9.0～8.0
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5～10
- 9.9～10.0
- 10
- 10.0～9.0
- 10～10.5
- 10~11
- 10.4~10.5
- 10.5
- 10.5～11
- 10.9～11.0
- 11
- 11.0～10.0
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5～12
- 11.9～12.0
- 12
- 12.0～11.0
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5
- 12.5～13
- 12.9～13.0
- 13.0～12.0
- 13～13.5
- 13～14
- 13.4～13.5
- 13.5～14
- 13.9~14.0
- 14
- 14.0～13.0
- 14～14.5
- 14~15
- 14.4～14.5
- 14.5～15
- 14.9～15.0
- 15.0～14.0
- 15～15.5
- 15~16
- 15.4～15.5
- 15.5～16
- 15.9～16.0
- 16
- 16.0～15.0
- 16～16.5
- 16～17
- 16–70
- 16～85
- 16～180
- 16.4～16.5
- 16.5～17
- 16.9～17.0
- 17.0～16.0
- 17～17.5
- 17～18
- 17.4～17.5
- 17.5～18
- 17.9～18.0
- 18
- 18.0～17.0
- 18～18.5
- 18~19
- 18.4～18.5
- 18.5～19
- 18.9～19.0
- 19.0～18.0
- 19～19.5
- 19～20
- 19.4～19.5
- 19.5～20
- 19.9～20.0
- 20
- 20.0～19.0
- 22.0～21.0
- 25
- 30
- 32
- ～32
- 32.0～31.0
- 36
- M36
- 50
- Up to 50
- 100
-
Product Category
-
Applicable Manufacturing Machinery (main unit)
-
Chuck Type
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 20
- 24.5
- 25
- 26.5
- 29
- 30
- 33
- 34
- 35
- 39
- 40
- 44
- 45
- 47
- 50
- 52
- 54
- 55
- 60
- 62
- 62.5
- 65
- 67.5
- 68.5
- 70
- 74
- 75
- 80
- 81
- 82
- 84.5
- 85
- 90
- 90.5
- 91
- 93
- 95
- 95/135/165
- 96
- 97.5
- 98
- 100
- 100/140/170
- 105
- 105.5
- 109.5
- 110
- 115
- 120
- 120/160/190
- 122
- 125
- 125/175/205
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137.5
- 140
- 150
- 155
- 162.5
- 164.5
- 165
- 169
- 170
- 175
- 176.5
- 180
- 180.5
- 182.5
- 185
- 186.5
- 190
- 193.5
- 195
- 200
- 220
- 250
- 300
- 350
- 400
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
-
Nozzle Type
Narrow search by specifying Manufacturer
-
- DAISHOWASEIKI (111)
- YUKIWA SEIKO (68)
- TRUSCO NAKAYAMA (63)
- MANYO TOOLS (49)
- ESCO (37)
- NIKKENKOSAKU (28)
- TAKURA KOGU (18)
- KATO MFG (16)
- SHOWA TOOL (13)
- SUMITOMO_ELEC_ (10)
- FUSOSEIKI (5)
- NOGA_JAPAN (5)
- SANDVIK (5)
- THE_CUT (5)
- NIIGATASEIKI (4)
- NIKKI_TRADING (4)
- VESSEL (4)
- KASAHARA (3)
- MITSUTOMO (3)
- TSCHORN (3)
- VERTEX (3)
- FUJI TOOL (2)
- NEW STRONG (2)
- ALBRECHT (1)
- GIGA SELECTION (1)
- BLUEBIRD (1)
- DREMEL (1)
- FESTO (1)
- KOBAYASHITEKKO (1)
- KYORITSU SEIKI (1)
- MINITOR (1)
- MARVEL (1)
- NABEYA (1)
- NAKANISHI (1)
- NT TOOL (1)
- SINWASOKUTEI (1)
- TOHIN SHOJI (1)
CAD
-
- 2D
- 3D
Related Categories to Tooling
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy