(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Heat Processing Machines
| Days to Ship |
|
|---|
-
Hot Jet (Vinyl Chloride Welder) Gun Single Item
FUJIIMPULSE
[Features]
· Continuous operation is possible over many hours.
· Since lubricating oil is not required, it saves you time, and there is no oil content in the hot air.
[Applications]
· For piping, duct lining creation, distortion fitting creation, and sign creation.Standard Price: MYR 5,708.05 Days to Ship: 8 Day(s) -
GOOT
[Features]
· Easily cuts curves that are difficult to machine with scissors or cutter knives.
· Double edge blade can easily cut at an acute angle and achieve serpentine cuts.
· Chrome plated soldering tip prevents foreign matter from adhering.
[Applications]
· Cutting plastic bottles, clipping, drilling and pattern cuttingStandard Price: MYR 75.57 Days to Ship: 10 Day(s) -
Hot Jet (PVC Welding Machine) Gun Single Item
MATSUDEN
[Features]
· A diaphragm blower type that does not make annoying noise.
[Applications]
· Welding thermoplastic resin (vinyl chloride, etc.), localized drying, small diameter tube shrinking, etc.Standard Price: MYR 1,113.84 Days to Ship: 8 Day(s) or more -
PARK HEAT
[Features]
· The use of the carbon brushless motor enables long-term operation.
· Dual insulation specification.
· CE standard product.
· PSE marked item.
[Applications]
· Heating, drying, thermal activation, plastic welding, shrinking, thermal softening, sterilization, and thawing.Standard Price: MYR 5,466.92 Days to Ship: 10 Day(s) -
hot jet (vinyl chloride welding machine)
MATSUDEN
[Features]
·Diaphragm and blower type that does not cause noise.
[Applications]
·Suitable for welding of thermoplastic resins (vinyl chloride, etc.), local drying, and shrinkage of small-diameter tubes.Standard Price: MYR 5,756.77- Days to Ship: 5 Day(s) or more -
ISHIZAKI
The knife-shaped hot blades can cut vinyl etc. For cutting nylon, vinyl, polyester, etc.
Standard Price: MYR 231.33 Days to Ship: 9 Day(s) -
Installation Type Hot Air Heater
PARK HEAT
[Features]
·It is small and lightweight.
·Perfect for spot heating.
·CE standard compliant product.
[Applications]
·Heating, drying, heat activation, plastic processing, lamination, shrinkage, heat softening, sterilization, thawing.Standard Price: MYR 3,973.73- Days to Ship: 9 Day(s) or more -
ESCO
【Product Specifications】
・Temperature-250 to 500℃
・Air flow-250 to 500L/min
・Two-stage switching(Low/High)
・Power supply-100V・1,200W
・Size-245×83×250(H)mm
・Weight-570g
・Code Length(m)-2
・Accessories-Nozzles 4pcs., Scraper 、Resin caseStandard Price: MYR 587.92 Days to Ship: 6 Day(s) or more -
Pla-Jet, Standard Type Industrial Hot Air Blower
ISHIZAKI
[Features]
·This is a standard type industrial hot air fan.
[Applications]
·Shrinkage of shrink wrap, peeling of labels, and bending of PVC pipes.Standard Price: MYR 680.80- Days to Ship: 9 Day(s) -
Pla-Jet, for Shrinking Shrink Wrap, Peeling Labels, and Bending PVC Pipe
ISHIZAKI
[Features]
· Temperature variable type (250-600°C).
[Applications]
· Shrinking shrink packages, label removal, bending PVC pipes.Standard Price: MYR 1,197.18- Days to Ship: 9 Day(s) or more -
Silicone Rubber Roller for Hot Air Blower
ISHIZAKI
[Features]
· A roller for gluing polyvinyl chloride, etc.
[Applications]
· Hot air processing machine Plajet (206A, 208A, 210A, 214A) silicone rubber roller.Standard Price: MYR 193.02 Days to Ship: 9 Day(s) -
PLAJET Parts【1-2 Pieces Per Package】
ISHIZAKI
[Features]
· Insulation sheet, heater, carbon brush and various parts are available for the hot air processing machine Plajet.Standard Price: MYR 44.24- Days to Ship: 9 Day(s) or more -
GOOT
[Features]
・ The cut end does not fray after processing
・ With a ceramic heater, quick recovery, high power and energy saving
・ A chrome-plated soldering iron tip to prevent debris from sticking
・ For cutting nylon, vinyl and polyethylene materials
・ Can be used for heat cutting of nylon garden nets, fishing nets, promotional flags, etc.
[Applications]
・ For cutting nylon nets and clothsStandard Price: MYR 189.23 Days to Ship: 9 Day(s) -
Handy Hot Air Blower - Temporary Weld-On Nozzle
PARK HEAT
[Specifications]
·For temporary welding of thermoplastics.
·Compatible models: PHW1 type / PHW7 typeStandard Price: MYR 320.28 Days to Ship: 5 Day(s) or more -
Hot Jet (PVC Welding Machine) Bobbin【2 Pieces Per Package】
MATSUDEN
[Specifications]
·Bobbin for Hot Jet (PVC welding machine).Standard Price: MYR 250.44 Days to Ship: 5 Day(s) or more -
Heat Gun (Temperature Variable Type) EA365VA-12
ESCO
【Product Specifications】
・Temperature of hot air-250 to 600℃
・Air flow-180L/min
・switch-Airflow switchable to 4 levels(OFF, FLOW AIR, LOW, HIGH )
・Power supply-AC100V, (50/60Hz)
・Power consumption-1020W
・Size-253x70x200(H)mm
・Weight-About 950g
・Code Length(m)-30
・Accessories-Nozzles 3pcs., Steel case
・Corresponded to a wide range work in the strength and weakness functionStandard Price: MYR 1,929.50 Days to Ship: 6 Day(s) or more -
ESCO
【Product Specifications】
・Warm flow,Temperature-600℃
・Air flow-140L/min
・Power supply-AC100V, (50/60Hz)
・Power consumption-1200W
・Size-96x280x96(H)mm
・Cord Length(m)-30
・Weight-About 1000g
・Stationary typeStandard Price: MYR 1,832.74 Days to Ship: 10 Day(s) or more -
GOOT
[Specifications]
·Replacement nozzle for hot melt glue stick Hot Bond HB-80.
·Please select the tip nozzle according to your application.Standard Price: MYR 26.64 Days to Ship: 10 Day(s) -
Replacement Soldering Tip For Hot Knife
GOOT
goot (Taiyo Denki Sangyo) replacement iron tip for heat processing machine hot knife.
Standard Price: MYR 23.18- Days to Ship: 9 Day(s) -
MITSUTOMO
[Features]
· Includes convenient storage case.
[Applications]
· For cutting, outlining and making holes in Styrofoam.Standard Price: MYR 310.08 Days to Ship: 10 Day(s) -
Pla-Jet, Attachments for Wide Range of Applications
ISHIZAKI
[Features]
· Attachments which increase applications are included.
[Applications]
· Shrinking shrink packages, label removal, bending PVC pipes.Standard Price: MYR 786.59- Days to Ship: 9 Day(s) or more -
Pla-Jet, Welding Instrument Dedicated to Resin (PVC)
ISHIZAKI
[Features]
·The best-selling product for resin (vinyl chloride) welding.
[Applications]
·Used for welding PVC and melting solder.Standard Price: MYR 753.50- Days to Ship: 9 Day(s) or more -
ISHIZAKI
[Features]
· It can be used at 950 W, 650 W and 400 W modes with a separately purchased heater.
[Applications]
· For hot air heating, resin processing, and drying.Standard Price: MYR 1,694.33 Days to Ship: 9 Day(s) -
"PLAJET" (Plug-in Heater Type)
ISHIZAKI
Maintenance using the insertion type heater is simple. For dryers and hot blower heaters, for resin processing and preheating devices.
Standard Price: MYR 2,533.60 Days to Ship: 9 Day(s) -
Plajet (variable temperature type)
ISHIZAKI
[Features]
· Electronic temperature control and airflow control knobs are provided.
[Applications]
· For hot air heating, resin processing, and drying.Standard Price: MYR 4,409.29 Days to Ship: 9 Day(s) -
ISHIZAKI
[Specifications]
·Dedicated type for PVC welding.
·Accessories: Filter, carbon brush, rigid PVC welding rodStandard Price: MYR 1,694.33 Days to Ship: 10 Day(s) -
ISHIZAKI
[Features]
·Nozzle suitable for each application.
[Applications]
·Attachment for hot air processing machine Plaget (206 A1, 208 A1, 210 A, 214 A, 218 A).Standard Price: MYR 105.46- Days to Ship: 9 Day(s) -
Handy Hot Air Blower - Standard Nozzle
PARK HEAT
[Specifications]
·For plastic welding.
·Compatible models: PHW1 type / PHW7 typeStandard Price: MYR 437.46 Days to Ship: 10 Day(s) -
Handy Hot Air Blower - Speed Weld-On Nozzle
PARK HEAT
[Applications]
· For welding thermoplastics.
· Factory chemical tank manufacturing, pipe connection, lining, repair, etc.Standard Price: MYR 623.04 Days to Ship: 9 Day(s) -
Water Supply and Anti-Freezing Heater
HAKKO ELECTRIC
[Features]
· Easy to mount, provides sufficient anti-freezing effects.
· The product can be used in both hot and cold water supply pipes as it can withstand heat up to 105°C.
· A highly reliable thermostat is incorporated.
[Applications]
· For preventing freezing of water pipes.
· For preventing solar system piping from being frozen.
· For preventing general water piping from being frozen.
· Suitable for preventing freezing of water supply, drain, and pump pipes at manufacturing plants.Standard Price: MYR 182.84- Days to Ship: 9 Day(s) -
ESCO
【Product Specifications】
・Warm flow,Temperature-450℃
・Air flow-180L/min
・switch-Airflow switchable to 3 levels(OFF, FLOW AIR, FLOW HOT AIR)
・Power supply-AC100V, (50/60Hz)
・Power consumption-1000W
・Size-213x70x191(H)mm
・Weight-About 750g
・Cord Length(m)-30Standard Price: MYR 764.86 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Warm flow,Temperature-450℃, with concentrated nozzle：500℃
・Air flow-180L/min
・Power supply-AC100V, 1000W
・switch-Airflow switchable to 3 levels(OFF, FLOW AIR, FLOW HOT AIR)
・Size-213x70x191(H)mm
・Weight-About 750g
・Cord Length(m)-30
・Accessories-Spoon nozzlex1, heat wind concentration nozzlex1Standard Price: MYR 888.94 Days to Ship: 5 Day(s) or more -
Heat Gun (Temperature Variable Type) EA365VA-2
ESCO
【Product Specifications】
・Warm flow,Temperature-250 to 600℃
・Air flow-180L/min
・switch-Airflow switchable to 4 levels(OFF, FLOW AIR, LOW, HIGH )
・Power supply-AC100V, (50/60Hz)
・Power consumption-1020W
・Size-253x70x200(H)mm
・Cord Length(m)-30
・Weight-About 950g
・Temperature control is possible.Standard Price: MYR 1,321.76 Days to Ship: 6 Day(s) or more -
Heat Gun (for Welding) EA365VA-3
ESCO
【Product Specifications】
・Warm flow,Temperature-310℃
・Air pressure-130mmAq
・switch-Airflow switchable to 3 levels(OFF, FLOW AIR, FLOW HOT AIR)
・Power supply-AC100V, (50/60Hz)
・Power consumption-300W
・Size-260x70x191(H)mm
・Weight-About 740g
・Welding only heatgun
・Realizes temperature and wind pressure best suited for PVC welding.
・Cord Length(m)-30Standard Price: MYR 823.64 Days to Ship: 5 Day(s) or more -
Immersion Type Pipe Heater EA896A-1C
ESCO
【Product Specifications】
・Power cord-1.5m
・Power source-100VAC
・This can change the cold water to the hot water easily.
・Safety design that does not damage a plastic bucket bottom.
・Specific to water heating
・Without thermostat function
・Heater length…450mm (with temperture controller)
・Power consumption…1,000WStandard Price: MYR 914.92 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 2,170.24- Days to Ship: 13 Day(s) or more -
Standard Price: MYR 583.47 Days to Ship: 13 Day(s) or more -
GOOT
[Features]
· The cut end melts after cutting and the rope does not fray.
· Also cuts resin gardening nets and fishing nets.
· Chrome plated soldering tip prevents foreign matter from adhering.Standard Price: MYR 99.41 Days to Ship: 9 Day(s) -
GOOT
[Features]
· The soldering tip is finished with chrome plating to prevent foreign matter from adhering.
[Applications]
· For cutting embroidery, uniform numbers and appliqueStandard Price: MYR 154.56 Days to Ship: 9 Day(s) -
Replacement Soldering Tip For HE-31
GOOT
[Specifications]
·Product type: Hot air processing machine parts
·Shaft diameter (mm): ⌀3
·Tip length (mm): 8Standard Price: MYR 31.24 Days to Ship: 9 Day(s) -
Replacement Soldering Tip For HE-60
GOOT
[Specifications]
・ Overall length: 85 mm
·Shaft diameter (mm): ⌀6
·Width (mm): 12Standard Price: MYR 35.37 Days to Ship: 10 Day(s) -
MITSUTOMO
[Features]
· Can be used with household outlets.
· Has a convenient hand switch.
[Applications]
· Freely cut, outline and make holes in StyrofoamStandard Price: MYR 287.80 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Power Supply(V) |
| Hot air temperature(°C) |
| Temperature Range(°C) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUJIIMPULSE | GOOT | MATSUDEN | PARK HEAT | MATSUDEN | ISHIZAKI | PARK HEAT | ESCO | ISHIZAKI | ISHIZAKI | ISHIZAKI | ISHIZAKI | GOOT | PARK HEAT | MATSUDEN | ESCO | ESCO | GOOT | GOOT | MITSUTOMO | ISHIZAKI | ISHIZAKI | ISHIZAKI | ISHIZAKI | ISHIZAKI | ISHIZAKI | ISHIZAKI | PARK HEAT | PARK HEAT | HAKKO ELECTRIC | ESCO | ESCO | ESCO | ESCO | ESCO | AS ONE | AS ONE | GOOT | GOOT | GOOT | GOOT | MITSUTOMO |
| Product Series | Pla-Jet, for Shrinking Shrink Wrap, Peeling Labels, and Bending PVC Pipe | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) |
| Product Type | Hot Air Processing Machine | Heat Cutter | Hot Air Processing Machine | Hot Air Processing Machine | Pot jet | Heat Cutter | Hot Air Generator (installation type) | - | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine Parts | Hot Air Processing Machine Parts | - | - | - | - | - | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine | Hot Air Processing Machine Parts | Hot Air Processing Machine Parts | Thermocouple | - | - | - | - | - | - | - | Heat Cutter | Heat Cutter | Hot Air Processing Machine Parts | - | - |
| Power Supply(V) | 100 | - | 100 | Single-phase 200 | 100 | AC100 | Single-phase 200/230 | - | AC100 ～ AC220 | AC100 ～ AC220 | - | - | AC100 | - | - | - | - | - | - | - | AC100 ～ AC220 | AC100 ～ AC220 | AC100 | AC200 | AC100 | AC100 | - | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | - |
| Hot air temperature(°C) | - | - | - | - | - | - | - | - | 450 | 250～600 | - | - | - | - | - | - | - | - | - | - | 450 | 310 | 600 | 600 | Room Temperature-500 | 500 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Temperature Range(°C) | Gun Output Voltage 40-100 V 7 Step Switching | - | - | Normal Temperature~650 | 0–400 | - | Normal Temperature~650 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Power Supply(V)
-
Hot air temperature(°C)
- Room Temperature-500
- 250～600
- 310
- 450
- 500
- 600
-
Temperature Range(°C)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Heat Processing Machines
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy