(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screw-Hole-Related Tools（Screw Types：Meter Page6）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Spiral Fluted Taps for Tough Stainless Steels_SU2-SP【1-162 Pieces Per Package】
YAMAWA MFG
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
Standard Price: MYR 53.68- Days to Ship: 7 Day(s) or more -
Hand Taps for Hard-to-Machine Materials_EH-HT【1-169 Pieces Per Package】
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Standard Price: MYR 55.56- Days to Ship: 8 Day(s) or more -
Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO【1-170 Pieces Per Package】
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Standard Price: MYR 59.65- Days to Ship: 7 Day(s) or more -
Roll Taps for Thin Soft Structural Steel Sheets_R-Y
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: MYR 52.31- Days to Ship: 9 Day(s) -
Spiral ULTRA SYNCHRO Tap for Aluminum_US-AL-SFT
OSG
[Specifications]
· Shape: Spiral Tap
· Screw type: metric
· Chamfer threads: 3 P
· Work Material: Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [◎] / Magnesium Alloy Casting (MC) (◎) / Zinc Alloy Casting (ZDC) [◎]Standard Price: MYR 105.06- Days to Ship: 5 Day(s) or more -
General Application(with OX)_EX-LT-H-POT
OSG
[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]Standard Price: MYR 82.60- Days to Ship: 5 Day(s) or more -
Grooveless Tap Series, X Performer Long Shank LT-S-XPF
OSG
[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]Standard Price: MYR 152.31- Days to Ship: 5 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-H
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSSStandard Price: MYR 411.86- Days to Ship: 5 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-S
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: Alloy HSS (SKS)Standard Price: MYR 160.34- Days to Ship: 5 Day(s) or more -
Spiral Tap with Long Shank_A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Standard Price: MYR 142.45- Days to Ship: 5 Day(s) or more -
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: MYR 137.47- Days to Ship: 5 Day(s) or more -
Thread Repair Tool, Doctor Bolt
LIGHTSEIKI
This is Thread Repair Tool, Doctor Bolt .
[Features]
·Easily repair damage to the tip
·Unlike conventional products, no guides or handles are required
· Performing the work involves visually checking the screw threads to easily and reliably correct them.Standard Price: MYR 288.88- Days to Ship: 5 Day(s) or more -
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.Standard Price: MYR 142.63- Days to Ship: 8 Day(s) or more -
Roll Taps for Medium Hardness Carbon Steels_MHRZ-J
YAMAWA MFG
[Features]
· Reduction of torque is now achieved.
· Durability is dramatically improved through active use of materials and coatings with excellent wear resistance.
· Stable threading of tempered material (up to 35HRC) is realized.
· It can be used with water-soluble cutting fluids.Standard Price: MYR 145.84- Days to Ship: 7 Day(s) or more -
Spiral Fluted Tap for Through Hole On Medium Hardness Carbon Steel for MHSL Meter Screw
YAMAWA MFG
[Features]
· Medium hardness through-hole steel machining exhibits outstanding effects.
· Boasts second to none durability for cutting of automobile parts (medium carbon steel, etc.) such as hub bearings.
[Applications]
· For through hole finish work.
· Work materials: High carbon steel, alloy steel, and tool steel.
[Material]
· High-Speed Steel (HSS-Co)Standard Price: MYR 128.16- Days to Ship: 9 Day(s) -
I-Series Spiral Tap ISP Blister Pack Product
YAMAWA MFG
[Features]
· Low-speed machining tap for steel materials that can be used in hand-cranked and drilling machines.
[Applications]
· For blind hole machining.
· Work materials: Mild steel, such as SPC, SS400.
[Material]
· High-Speed Steel (HSS)Standard Price: MYR 49.50- Days to Ship: 9 Day(s) -
Spiral Tap Claw Tap 300 TiCN Coating (for metal screws)
SANDVIK
Taps are available for each work material, making selection easy.
Hole type: For blind holes
Coating: Surface treatment for steelStandard Price: MYR 129.07- Days to Ship: 4 Day(s) or more -
Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· TiN coating with high heat resistance ensures long service life even for work materials that are prone to heat buildup.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole machining.
· Work materials: Steel.
[Material]
· High-Speed Steel (HSS-E)Standard Price: MYR 176.39- Days to Ship: 10 Day(s) -
I-Series General Purpose Point Tap IPO Blister Pack Product
YAMAWA MFG
[Features]
· Low-speed machining tap for steel materials that can be used in hand-cranked and drilling machines.
[Applications]
· For through hole finish work.
· Work materials: Mild steel, such as SPC, SS400.Standard Price: MYR 45.28- Days to Ship: 9 Day(s) -
Stainless Steel-Use Jet-Type (Metal Screw-Use)
ISHIHASHI
[Features]
· Excellent sharpness and outstanding durability for difficult-to-cut stainless steel.
· Uses carefully selected super high-speed steel (HSS-E).
· Abrasion torque has been reduced through the specially designed shape and special secondary processing.
[Applications]
· For through hole finish work.
· Work materials: Stainless steel, low and medium carbon steel.Standard Price: MYR 62.84- Days to Ship: 8 Day(s) -
Point Tap CoroTap 200 (For Metric Threads)
SANDVIK
[Features]
· A high-productivity tap tool.
· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
· There are different taps for different work materials, making selecting a tap simple
[Applications]
· For machining through holes.
· Work material: heat-resistant alloys, steel, stainless steel.Standard Price: MYR 87.12- Days to Ship: 5 Day(s) or more -
CoroTap 200 3 × DN Point Tap JIS EP0DM
SANDVIK
[Features]
·Wide selection of power strip for different work materials
·For work materials with long cutting chipsStandard Price: MYR 128.55- Days to Ship: 4 Day(s) or more -
Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type)
SANDVIK
[Features]
· A high-productivity tap tool.
· The long tool life and excellent chip discharging capabilities help ensure high levels of stability.
· The highly heat-resistant TiN coating ensures a long life, even for those work materials which are prone to building up heat.
· There are different taps for different work materials, making selecting a tap simple
[Applications]
· For machining through holes.
· Work material: steel, cast iron, aluminum alloy.Standard Price: MYR 279.46- Days to Ship: 10 Day(s) -
Roll Tap Coro Tap 400 TiN Coated (For blind and through holes, non-fluted)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Rolling tap that does not emit chips.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole or through hole machining.
· Work materials: Steel, stainless steel, aluminum alloy, nickel alloy.Standard Price: MYR 297.23- Days to Ship: 10 Day(s) -
SU Roll Tap for SURZ Unify Screw Thread
YAMAWA MFG
[Features]
· A roll tap which realizes control of the inner diameter shape of female screws.
[Applications]
· Work materials: Stainless steel, carbon steel, alloy steel, and tool steel.Standard Price: MYR 179.56- Days to Ship: 9 Day(s) -
Hand Tap (for Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)Standard Price: MYR 112.18- Days to Ship: 5 Day(s) or more -
Hand Tap Set (for Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)Standard Price: MYR 337.02- Days to Ship: 5 Day(s) or more -
I-Series Hand Tap IHT Blister Pack Product
YAMAWA MFG
[Features]
· Low-speed machining tap for steel materials that can be used in hand-cranked and drilling machines.
[Applications]
· Work materials: Mild steel, such as SPC, SS400.Standard Price: MYR 41.15- Days to Ship: 9 Day(s) -
Hand Tap/Die Set (for Metric Screws)
TRUSCO NAKAYAMA
[Features]
· It is a set of hand-taps from M3 to M16, 38-diameter circular dies, tap handle, tap holder and die handle that can be used to make and clean coarse threaded holes and threads.
· A set item convenient for storage.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.
[Material]
· Low Alloy Steel (SKS)Standard Price: MYR 3,701.13 Days to Ship: 9 Day(s) -
NACHI
[Features]
·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditionsStandard Price: MYR 111.85- Days to Ship: 4 Day(s) or more -
NACHI
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.Standard Price: MYR 110.70- Days to Ship: 5 Day(s) or more -
ISHIHASHI
[Features]
· A general tap that can be used in all directions.
· Machining screw: metric fine thread
· A set of 3 taper, plug and bottoming taps.Standard Price: MYR 208.08- Days to Ship: 11 Day(s) or more -
SG Spiral Tap Long Shank SGSPL
NACHI
[Applications]
·Used when standard dimension does not have enough tool runout lengthStandard Price: MYR 195.51- Days to Ship: 6 Day(s) or more -
NACHI
[Features]
・ A high performance general purpose tap with long life and little variation over a wide range of machining work.Standard Price: MYR 87.11- Days to Ship: 4 Day(s) or more -
NACHI
[Features]
・ Used when the protrusion length is insufficient with standard size.Standard Price: MYR 468.22 Days to Ship: 6 Day(s) or more -
Spiral Fluted Taps for General Purpose_ISP
YAMAWA MFG
[Features]
· Blind hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The groove is twisted to discharge scrap in the opposite direction from bit movement, for use with blind holes.Standard Price: MYR 46.32- Days to Ship: 9 Day(s) -
Spiral Fluted Taps 1.5P_SP-1.5P
YAMAWA MFG
■ The SP 1.5P has a shorter cutting chamferthan usual and there is no convex center atthe end. This makes it the best spiral flute tapfor machining a blind hole that does not havethe pilot hole length for processing the threadlength.
Standard Price: MYR 58.33- Days to Ship: 8 Day(s) or more -
Spiral Fluted Taps for Aluminum 1.5P_AL-SP-1.5P
YAMAWA MFG
[Features]
· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.Standard Price: MYR 66.75- Days to Ship: 5 Day(s) or more -
Spiral Pointed Taps for General Purpose_IPO
YAMAWA MFG
[Features]
· Through-hole tap for low speed machining with a drilling machine.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.
· The biting part has a twisted groove to discharge scrap in the same direction as bit movement, for use with through holes.Standard Price: MYR 47.67- Days to Ship: 9 Day(s) -
YAMAWA MFG
[Features]
· Ideal for S48C to S55C forged products and tempered materials (20 to 30 HRC).
· Realizes longer life by adopting a special coating and high-speed steel material for abrasion resistance.
· Adopts an original groove shape that realizes stable scrap discharge at medium speeds.
· Improves the surface roughness of female threads.Standard Price: MYR 122.28- Days to Ship: 8 Day(s) or more -
Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S
YAMAWA MFG
[Features]
· (Straight type) Roll tap check pin that can be used to check several types of pilot hole diameters and pilot hole depth.
· High-speed tool steel is used out of consideration for abrasion resistance.
· Can be used for blind holes.Standard Price: MYR 140.62- Days to Ship: 9 Day(s) -
Standard Price: MYR 684.39- Days to Ship: 10 Day(s) -
TRUSCO Tap Die Set For 10 mm To 24 mm Metric Screws (Coarse)【19 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Set of M10 to 24 hand taps for refining (making clean) coarse screw threads, round ⌀50 dies, tap handles, tap holders and die handles.
Set product for convenient storage.
[Applications]
· Work materials: iron, light metals
· For creating and modifying coarse screw threadsStandard Price: MYR 8,398.84 Days to Ship: 9 Day(s) -
TRUSCO Tap Die Set For 10 mm To 24 mm Metric Screws (Fine)【19 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Set of M10 to 24 hand taps for refining (making clean) fine screw threads, round ⌀50 dies, tap handles, tap holders and die handles.
Set product for convenient storage.
[Applications]
· Work materials: iron, light metals
· For creating and modifying fine screw threadsStandard Price: MYR 9,500.57 Days to Ship: 9 Day(s) -
Oxidized Spiral Pointed Taps for High Carbon Steels_HC-PO-OX【1-73 Pieces Per Package】
YAMAWA MFG
[Features]
· A point tap suitable for tapping high carbon steel varieties such as S55C.Standard Price: MYR 83.91- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | LIGHTSEIKI | RUKO | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SANDVIK | SANDVIK | YAMAWA MFG | ISHIHASHI | SANDVIK | SANDVIK | SANDVIK | SANDVIK | YAMAWA MFG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG | TRUSCO NAKAYAMA | NACHI | NACHI | ISHIHASHI | NACHI | NACHI | NACHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG |
| Product Series | Spiral Fluted Taps for Tough Stainless Steels_SU2-SP【1-162 Pieces Per Package】 | Hand Taps for Hard-to-Machine Materials_EH-HT【1-169 Pieces Per Package】 | Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO【1-170 Pieces Per Package】 | Threading Round Die Series Pipe General Threading Round Die RD-H | Threading Round Die Series Pipe General Threading Round Die RD-S | Spiral Fluted Tap for Through Hole On Medium Hardness Carbon Steel for MHSL Meter Screw | Spiral Tap Claw Tap 300 TiN Coating (for metal screws/coarse type) | Point Tap CoroTap 200, TiN Coated (For Metric Threads, Fine Type) | Roll Tap Coro Tap 400 TiN Coated (For blind and through holes, non-fluted) | Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S | TRUSCO Tap Die Set For 10 mm To 24 mm Metric Screws (Coarse)【19 Pieces Per Package】 | TRUSCO Tap Die Set For 10 mm To 24 mm Metric Screws (Fine)【19 Pieces Per Package】 | Oxidized Spiral Pointed Taps for High Carbon Steels_HC-PO-OX【1-73 Pieces Per Package】 | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 10 Day(s) | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 10 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more |
| Screw size (Nominal) | M3 ～ M24 | M3 ～ M30 | M3 ～ M24 | M2 ～ M8 | M3 ～ M24 | M3 ～ M20 | M3 ～ M12 | M2 ～ M25 | M2 ～ M48 | M2 ～ M24 | M2 ～ M24 | M4 ～ M14 | M3 ～ M10 | M6 ～ M14 | M6 ～ M16 | M3 ～ M10 | M3 ～ M24 | M4 ～ M10 | M3 ～ M10 | M2.0 ～ M16.0 | M5 ～ M8 | - | M8 ～ M12 | M8 ～ M10 | No.2 ～ No.6 | M12 ～ M30 | M12 ～ M30 | M3 ～ M10 | - | M4 ～ M16 | M2.6 ～ M8 | M4 ～ M12 | M4 | M3.5 ～ M24 | - | M3 ～ M10 | M1.2 ～ M16 | M2 ～ M16 | M3 ～ M10 | M6 ～ M16 | M2 ～ M12 | 3.5 ～ 9 | - | - | M6 ～ M8 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | - | - | High Carbon Steel (C with a content over 0.45%)[○] |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 3 | 0.5 ～ 3.5 | 0.5 ～ 3 | 0.4 ～ 1.25 | 0.5 ～ 3 | 0.5 ～ 2.5 | 0.5 ～ 1.75 | 0.35 ～ 3 | 0.25 ～ 5 | 0.25 ～ 3 | 0.25 ～ 3 | 0.7 ～ 2 | 0.5 ～ 1.5 | 1 ～ 1.5 | 1 ～ 1.75 | 0.5 ～ 1.5 | 0.5 ～ 3 | 0.7 ～ 1.5 | 0.5 ～ 1.5 | 0.4 ～ 2 | 0.8 ～ 1.25 | - | 1 | 1.25 ～ 1.5 | 0.45 ～ 0.79 | 1.25 ～ 3.5 | 1.25 ～ 3.5 | 0.5 ～ 1.5 | - | 0.5 ～ 1.5 | 0.45 ～ 1.25 | 0.5 ～ 1 | 0.7 | 0.35 ～ 3 | - | 0.5 ～ 1.5 | 0.25 ～ 2 | 0.4 ～ 2 | 0.5 ～ 1.5 | 1 ～ 1.75 | 0.4 ～ 1.75 | 0.75 ～ 1.75 | - | - | 1 ～ 1.25 |
| Tool Material Type | High-speed steel | Cobalt HSS | Cobalt HSS | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Alloy HSS | Powder high-speed steel | Powder high-speed steel | - | High-speed steel | - | Cobalt HSS | High-speed steel | - | - | High-speed steel | - | - | - | - | - | Powder high-speed steel | SKS | SKS | High-speed steel | - | Alloy HSS | High-speed steel | High-speed steel | Alloy HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | Carbide | - | - | High-speed steel |
| Tap Type | Spiral Tap | Hand Tap | Point tap | Roll tap | Spiral Tap | Point tap | Roll tap | Die | Die | Spiral Tap | Point tap | Modification/removal Tool | Hand Tap | Roll tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | - | Point tap | Point tap | Point tap | Roll tap | Roll tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Spiral Tap | Point tap | Hand Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Spiral Tap | Thread-cutting-related tool | Thread cutter | Hand Tap | Hand Tap | Point tap |
| Hole type | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | - | For blind hole | For through hole | - | For through hole / For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | - | - | - | - | - | For through hole / For blind hole | - | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | - | - | - | For through hole |
| Chamfer threads (Lcf) | 3P | 2.5P ～ 5P | 4.5P | 3P | 3P | 5P | - | - | - | 2.5P | 5P | - | - | 2P ～ 4P | 5P ～ 7P | 2.5P | 2P | 2.5P | 5P | 5 | - | - | - | - | 2P | - | - | 2P ～ 5P | - | 2.5 | 5 | - | 2.5 | 2.5 | 5 | 2.5P | 1.5P | 1.5P | 5P | 5P ～ 7P | - | - | - | - | 5P |
| Coating Type | - | - | - | - | Non-Coated / Other | Non-Coated | Other | Non-Coated | Non-Coated | Other | Other | - | Non-Coated | - | TiCN | - | TiCN | TiN | - | Other | - | TiCN | TiN | - | TiCN | Non-Coated | Non-Coated | - | Non-Coated | TiCN | TiCN | - | - | - | - | Other | - | Nitriding Treatment | Other | Other | Non-Coated | Other | - | - | Other |
| Coating Y/N | NA | NA | NA | NA | Available / NA | NA | Available | NA | NA | Available | Available | - | NA | Available | Available | NA | Available | Available | NA | - | NA | Available | Available | - | Available | NA | NA | NA | NA | Available | Available | - | Available | NA | NA | Available | - | Available | Available | Available | NA | Available | - | - | Available |
| Overall Length (L)(mm) | 46 ～ 120 | 46 ～ 135 | 46 ～ 120 | 42 ～ 70 | 46 ～ 120 | 100 ～ 150 | 80 ～ 150 | - | - | 80 ～ 200 | 80 ～ 200 | - | 51 ～ 75 | 62 ～ 88 | 62 ～ 95 | 46 ～ 75 | 46 ～ 120 | 52 ～ 75 | 46 ～ 75 | 40 ～ 95 | 60 ～ 70 | - | 70 | 70 ～ 75 | 42 ～ 52 | 80 ～ 135 | 80 ～ 135 | 46 ～ 75 | - | 52 ～ 95 | 46 ～ 70 | 52 ～ 70 | 150 | 48 ～ 120 | 150 | 46 ～ 75 | 36 ～ 95 | 42 ～ 95 | 46 ～ 75 | 62 ～ 95 | 41.5 ～ 121 | - | - | - | 62 ～ 70 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 6
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14.0
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- YAMAWA MFG (110)
- OSG (89)
- ISHIHASHI (14)
- TRUSCO NAKAYAMA (12)
- SANDVIK (7)
- NACHI (6)
- GUHRING (5)
- HOZAN (4)
- SKC (4)
- TANOI MFG (4)
- ONISHI (2)
- RUKO (2)
- LIGHTSEIKI (1)
- NS TOOL (0)
- H & H (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- NIIGATASEIKI (0)
- TSUBOSAN (0)
- TOP (0)
- ENGINEER (0)
- UNION TOOL (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- ESCO (0)
- DOY FURNITURE (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy