(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Core Drills (Tip Tools)
| Days to Ship |
|
|---|
-
Core drill (for rotation) for polyvinyl chloride tube
HOUSE BM
[Features]
· A dedicated core drill with a blade design that's optimal for PVC pipe drilling work.
· Aluminum die cast is adopted for the core bottom.
· About 2/3 the weight of conventional products for improved workability.
· Equipped with Z-axis spindle (SDS type) as standard.
· Supports straight and SDS type electric drills.Standard Price: MYR 1,149.74- Days to Ship: 10 Day(s) or more -
Poly-Click Series, Dry Type, Diamond Core Drill Bits
MIYANAGA
[Features]
· Enables dry drilling of reinforced concrete.
· The cutter is an external periphery thread type and features excellent chip discharge.
· Enables dry drilling of reinforced concrete and Hume pipes.
· Can also drill rebar (D13: 1/2").
· Accurate positioning through use of a center pin with carbide.Standard Price: MYR 226.80- Days to Ship: 8 Day(s) or more -
Super Hard Core Drill (Rotating)
HOUSE BM
[Features]
· Adopts a special diamond tip that enables rapid drilling into hard-to-cut extruded cement plate and achieves both sharpness and durability.
· The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cutting chips without having to take apart the core drill body.
· Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
· Aluminum die cast is adopted for the core bottom.
· (φ65 or more) 2/3 lighter than the conventional model for enhanced workability.
· Equipped with Z-axis spindle (SDS type) as standard.
· Supports straight and SDS type electric drills.Standard Price: MYR 808.69- Days to Ship: 10 Day(s) -
Poly-Click Series, Wood Composite Core Drill Bit
MIYANAGA
[Features]
· Hole drilling can be performed with hand-held electric drill in resin-type synthetic marble/FRP/composite materials, and wood materials, etc.
· Use of a scribing knife enables clean drilling of fibrous material.
· Drilling in wood, plywood, etc.Standard Price: MYR 243.50- Days to Ship: 9 Day(s) -
Impact Core Drill (For Lightweight Hammer Drill)
HOUSE BM
[Features]
· The structure in which the power of the lightweight hammer drill is transmitted smoothly to the cutting edge enables speedy drilling.
· With a quick change center pin (φ32 or more), accurate positioning without a guide plate is possible.Standard Price: MYR 238.19- Days to Ship: 10 Day(s) -
HOUSE BM
[Features]
· With your rotary drill, Hume pipes, clay pipes, FRPM pipes, and PVC pipes can be drilled without water, causing little noise and no vibration.
· Special diamond blade enables precise hole drilling without chipping or cracking.Standard Price: MYR 1,900.18- Days to Ship: 10 Day(s) or more -
Hume Pipe Core Drill (for Hammer Drill)
HOUSE BM
[Features]
· It can also cut the rebar inside Hume pipes at the same time to enable accurate and speedy drilling without cracks.Standard Price: MYR 1,663.63- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (Multi)
HOUSE BM
[Features]
· Newly developed multiple flute type enables drilling holes in siding (ceramic, metal), ALC (with rebar), decking plate, thin iron sheets (1.2 mm or less), blocks, mortar, wood and other materials.Standard Price: MYR 2,099.01- Days to Ship: 10 Day(s) -
Poly-Click Series, Wet Type, Diamond Core Drill Bit
MIYANAGA
[Features]
· Tip replacement is a one touch method not requiring any tools.
· Sharpness that can be used to easily cut rebar with torque alone.
· Drills difficult to cut material such as iron-reinforced concrete, Hume pipe, stone, porcelain tile, and asphalt, making it ideal for fence strut construction.
· The internal water-injection system enables effective cutting edge cooling and smooth chip discharge.Standard Price: MYR 891.47- Days to Ship: 9 Day(s) -
Poly-Click Series, Galvawood Core Drill Bits
MIYANAGA
[Features]
· The unique tip shape improves grip on metal.
· The adoption of 2-stage blade enables smooth discharge of cutting chips.
· Cuts safely without nails getting jammed.
· Goes through even composite materials and layered planks in a single pass.
· The use of the guide bar keeps the center hole from expanding, and it is also possible to cleanly and safely drill metal siding using Galvalume steel plate.
· ALC (especially wet ALC) and cutting dust do not cause clogs, for smooth hole drilling.Standard Price: MYR 189.21- Days to Ship: 8 Day(s) or more -
Polyclick Series Composite (High) Brit Core Drill
MIYANAGA
[Features]
· For drilling in composite materials such as stainless steel plates and composite panels.
· Unique cutting edge shape is optimal for drilling composite materials such as kitchen counters and unitized bathroom boards.
· Ideal for drilling wooden floors.Standard Price: MYR 79.85- Days to Ship: 8 Day(s) or more -
Poly-Click Series, Dry Type, Diamond Core Drill Bits for Blocks
MIYANAGA
[Features]
· Enables dry drilling of extrusion molded cement, blocks, heavy-duty blocks and decorative blocks.
· Block walls (can drill rebar up to φ10).
· Accurate positioning through use of a center pin with carbide.
· The cutter is an external periphery thread type and features excellent chip discharge.Standard Price: MYR 266.03- Days to Ship: 8 Day(s) or more -
Composite (high) Bullet Core Drill BOX Kit
MIYANAGA
Miyanaga core drill BOX kit.
Hybrid Core Drill Bit Box KitStandard Price: MYR 2,921.95- Days to Ship: 9 Day(s) -
Poly-Click Series, Percussion Core Bits "S core"
MIYANAGA
[Features]
· Edge tip shape makes effective use of impact drill impact force and rotational force.
· Enables clean drilling without cracking the work surface.Standard Price: MYR 116.65- Days to Ship: 8 Day(s) or more -
"All-Core Drill L150 Series LA Type" (SDSplus Shank)
SANKO TECHNO
A simple design specialized for hole-punching performance reduces the weight. Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes. The amount of discharged chips increases dramatically, and boring workability is improved. Because the state of the remaining material can be confirmed easily, the material can be removed smoothly. Work material: ALC panel, Gypsum board.
Standard Price: MYR 397.95- Days to Ship: 8 Day(s) -
Diamond core bit (for diamond core machine)
HOUSE BM
[Features]
· Thin blade integrated core bit exhibits high boring capacity.Standard Price: MYR 920.05- Days to Ship: 10 Day(s) or more -
Core Drill (Rotary) for Dragon ALC
HOUSE BM
[Features]
· Blade designed to support ALC materials (piano wire, rebar reinforced) achieves comfortable working in rotation mode.
· The core outer periphery welding dragon grooves enable efficient cutting powder discharge and rapid drilling even of moist ALC material.
· Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
· Includes both a straight model and an SDS type shank, allowing it to be equipped to both chuck type machines and small, lightweight SDS hammer drills.
· The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cuttings chips without having to take apart the core drill body.
· Aluminum die cast is adopted for the core bottom. (φ55 or more) 2/3 lighter than the conventional model for enhanced workability.
[Applications]
· Work materials: ALC material (including rebar), gypsum boards.Standard Price: MYR 431.89- Days to Ship: 8 Day(s) or more -
Combined Rotating and Vibrating Core Drill (Combined Rotating and Vibrating)
HOUSE BM
[Features]
· Edge tip shape makes effective use of impact drill impact force and rotational force.
· Clean boring is possible without cracking the work surface.
· The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cuttings chips without having to take apart the core drill body.
· Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
· Aluminum die cast is adopted for the core bottom.
· (φ55 or more) 2/3 lighter than the conventional model for enhanced workability.
· Equipped with Z-axis spindle (SDS type) as standard.
· Supports straight and SDS type electric drills.Standard Price: MYR 482.70- Days to Ship: 10 Day(s) -
Diamond Core Drill (Dry Type) Straight Shank
LOBTEX
For piping for air conditioners, gas, water service, or electricity, in general to hard concrete, reinforced concrete (up to φ13 mm), ALC, etc.
[Features]
· The core (cutting scraps) can be conveniently pulled out from the top by using the simple body removal/insertion feature.
· Sharp bonds and excellent edges with double hex tip (rebar max φ13 mm).
· The unique tornado spiral groove forcibly discharges cutting chips.
· Grip part comes with knurling, for safe gripping.
· With convenient depth graduations (guideline).Standard Price: MYR 1,206.94- Days to Ship: 8 Day(s) or more -
Poly-Click Series, Common Shank
MIYANAGA
[Features]
- Automatic locking and manual release make it easier to remove the cutting core and replace the cutter.
・With two types of shanks, S and L, it can be attached to many sizes and types of cutters.
[Applications]
・Shank common to the PolyClick series.
・A straight shank and an SDS plus shank are available using an electric motor.Standard Price: MYR 217.72 Days to Ship: 5 Day(s) or more -
Poly-Click Series, Fan Fan Core Kits
MIYANAGA
[Features]
· Ideal sizes for drilling ventilators have been compiled into a kit.
· Different sizes (φ160, φ110) can be used by exchanging only the cutter.
· Simple "one-touch" replacement is possible when connecting and removing the shank and cutter.Standard Price: MYR 1,851.63- Days to Ship: 9 Day(s) -
"All-Core Drill L150 Series LV Type" (SDSplus Shank)
SANKO TECHNO
A simple design specialized for hole-punching performance reduces the weight. Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes. The amount of discharged chips increases dramatically, and boring workability is improved. Because the state of the remaining material can be confirmed easily, the material can be removed smoothly. Work material: Mortar, Block, Brick, Ceramic siding, Gypsum board.
Standard Price: MYR 1,591.73 Days to Ship: 8 Day(s) -
All Core Drill L150 Series LS Type (For Rotary Drill / SDSplus Shank)
SANKO TECHNO
[Features]
· A simple design specialized for hole-punching performance reduces the weight.
· Ideal effective length of 150 mm, calculated based on composite building material thickness, is applied to all sizes.
· The amount of discharged chips increases dramatically, and boring workability is improved.
[Applications]
· Work material: Ceramic/Metal siding, Gypsum board, Composite Plate, Wood, FRP, PVC pipe.
[Specifications]
· Applicable Model: Lightweight Hammer Drill (Rotation Mode)
[Material]
· Blade: Carbide Tip
· Center Pin: Alloy Steel (Tip Part: Carbide Tip)Standard Price: MYR 515.86 Days to Ship: 8 Day(s) -
Diamond core drill (straight shank)
TRUSCO NAKAYAMA
[Features]
· Suitable for electrical facilities, piping and wiring applications.
· The product is a wet type grinding tool with electrodeposition of diamonds on the blade of a hole saw shape.
[Applications]
· Work material: Tile, Block, Brick, Glass, etc.
· Applicable models: Electric drill with speed control function and power consumption of 500 W and higher (cannot be used for impact tools).Standard Price: MYR 144.41- Days to Ship: 5 Day(s) or more -
Wet Diamond Core Drill Bit, DC Type
UNIKA
[Features]
· Bores reinforced concrete (up to 1/2" rebar) with no vibration, low noise, and low load.
· Uses a single-action center pin system for easy center positioning.Standard Price: MYR 60.60- Days to Ship: 11 Day(s) or more -
Single Function Core Drill E&S
Dry Diamond Type UNIKA
[Features]
·Able to drill holes in reinforced concrete (cutting up to 3/4 bars) without using water.
·Vibration noise is also greatly reduced by the center pin method and cutting using only rotational force.
·Uses "10 mm/13 mm chuck combined shank" regardless of drill chuck diameter.Standard Price: MYR 755.58- Days to Ship: 8 Day(s) or more -
Single Function Core Drill E&S
for Composite Materials UNIKA
[Features]
·With a 2-piece set of blades leading the inner blade, it is possible to drill holes in composite materials such as metal-covered siding materials, stainless steel-covered wood, and "metal plate + insulation + plywood" in one shot.
·When drilling wood-based materials, chips are easily discharged, and it is possible to cut nails and cut thin iron plates in layers.Standard Price: MYR 468.27- Days to Ship: 9 Day(s) or more -
HOUSE BM
[Features]
· Core head (replacement blade) for various applications can be attached to your one-touch dial adapter type core drills.
· Adoption of the one-touch dial adapter N allows for easy replacement of the core head.
· Cutting scraps can be discharged easily with the USA patented non-screw lock center drill without disassembling the core drill body.Standard Price: MYR 1,041.60- Days to Ship: 10 Day(s) -
Z Axis Piping Core Drill (SDS type) (Lightweight Hammer Drill)
HOUSE BM
[Features]
· The spiral groove for discharging cutting powder improves drilling speed.
· The structure in which the power of the lightweight hammer drill is transmitted smoothly to the cutting edge enables speedy drilling.Standard Price: MYR 622.05- Days to Ship: 10 Day(s) -
Core Drill Part【1-6 Pieces Per Package】
HOUSE BM
[Features]
· Core drill parts including shanks, center pins, etc.Standard Price: MYR 106.53- Days to Ship: 8 Day(s) or more -
Siding/Wood Core Drill (Rotating)
HOUSE BM
[Features]
· With a blade designed for quick boring of wood and siding, comfortable work in rotation mode is possible.
· Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
· Includes both a straight model and an SDS type shank, allowing it to be equipped to both chuck type machines and small, lightweight SDS hammer drills.
· The chip pocket shows outstanding balance, excellent chip discharging effect, and stable drilling ability. (For deep boring, chip discharging is necessary while performing stepped work using an electric drill.)
· The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cutting chips without having to take apart the core drill body.
[Applications]
· Work materials: Siding boards (ceramic, metallic), wood (with nails), etc.Standard Price: MYR 238.19- Days to Ship: 8 Day(s) or more -
Dragon Diamond Core Drill (Rotary)
HOUSE BM
[Features]
· Drilling reinforced concrete is possible with your rotary drills. The core body outer periphery welding dragon grooves enable efficient cutting powder discharge and rapid drilling.
[Applications]
· For reinforced concrete, heavy blocks, hard tiles, and hardened ceramic sidingStandard Price: MYR 963.64- Days to Ship: 8 Day(s) or more -
Hammer Core Drill (for Hammer Drill)
HOUSE BM
[Features]
· The structure in which the heavy-duty power of the hammer drill is transmitted smoothly to the cutting edge enables speedy drilling.Standard Price: MYR 416.71- Days to Ship: 10 Day(s) -
Multi Ryoba Core Drill (for Rotation and Oscillation)
HOUSE BM
[Features]
· Newly developed multiple flute type enables drilling holes in siding (ceramic, metal), ALC (with rebar), decking plate, thin iron sheets (1.2 mm or less), blocks, mortar, wood and other materials.
· An economical type with double-edged head which can be used twice as long.
· Adoption of the one-touch dial adapter N allows for easy replacement of the core head.
· Patented wide tip enables easy removal of chips.
· Equipped with Z-axis spindle (SDS type) as standard.
· Supports straight and SDS type electric drills.Standard Price: MYR 515.46- Days to Ship: 9 Day(s) or more -
Multi-Layer Core Drill (for Rotation)
HOUSE BM
[Features]
· Multi-layer blade type that allows drilling of a wide variety of materials in rotational mode.
· The layered production method can extrude arrays of large grain diamonds, helping to prevent clogging. Therefore it realizes stable sharpness and high durability.
· Can work smoothly without the blade getting caught.
· Equipped as standard with a center pin and center drill.
· Positioning can be performed easily according to the material.
· Through hole machining in plywood walls is possible in one go, without catching on thermal insulation.Standard Price: MYR 739.93- Days to Ship: 10 Day(s) or more -
Multi Use Core Drill (for Rotation and Oscillation)
HOUSE BM
[Features]
· Newly developed multiple flute type enables drilling holes in siding (ceramic, metal), ALC (with rebar), decking plate, thin iron sheets (1.2 mm or less), blocks, mortar, wood and other materials.
· Patent pending wide tip enables easy removal of chips.
· The Kuzu Tori Pon! brand center drill features a non-screw locking structure that allows easy removal of cutting chips without having to take apart the core drill body.
· Newly developed radial one-shank system enables easy exchange onto core bodies of other sizes.
· Aluminum die cast is adopted for the core bottom.Standard Price: MYR 344.54- Days to Ship: 8 Day(s) or more -
Radius One Down Light Core Drill (Rotating)
HOUSE BM
[Features]
· With a clean dust cover, it blocks dust when drilling. (A clean dust cover cannot be used when the 200 mm size is used)
· Equipped with Z-axis spindle (SDS type) as standard.
· Supports straight and SDS type electric drills.Standard Price: MYR 1,547.20- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (For ALC)
HOUSE BM
[Features]
· Blade exchange type core drill, which is very economical.
· Aluminum die cast is adopted for the adapter.
· About 2/3 the weight of conventional products for improved workability.Standard Price: MYR 2,300.56- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (Siding/Wood)
HOUSE BM
[Features]
· With a blade designed for quick boring of wood and siding, comfortable work in rotation mode is possible.Standard Price: MYR 2,091.88- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (For Siding Wood)
HOUSE BM
[Features]
· Blade exchange type core drill, which is very economical.
· Aluminum die cast is adopted for the adapter.
· About 2/3 the weight of conventional products for improved workability.Standard Price: MYR 2,300.56- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (Dragon ALC)
HOUSE BM
[Features]
· Blade designed to support ALC (piano wire, rebar reinforced) achieves comfortable working in rotation mode.
· The core outer periphery welding dragon grooves enable efficient chip discharge and rapid drilling even of moist ALC material.Standard Price: MYR 2,814.25- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (Dragon Diamond)
HOUSE BM
[Features]
· Drilling hard-to-cut material such as reinforced concrete is possible with your rotary drills without using water.
· In addition, the core outer periphery welding dragon grooves enable efficient chip discharge and rapid drilling.Standard Price: MYR 4,838.91- Days to Ship: 10 Day(s) -
Radius One Ventilation Core Drill (Multi Layer)
HOUSE BM
[Features]
· Multi-layer blade type that allows drilling of a wide variety of materials in rotational mode.
· Stable operation can be performed without snagging.
· Through hole machining in plywood walls is possible in one go, without catching on thermal insulation.
· The layered production method can extrude arrays of large grain diamonds, helping to prevent clogging. Therefore it realizes stable sharpness and high durability.Standard Price: MYR 3,353.30- Days to Ship: 10 Day(s) -
Standard Price: MYR 720.56- Days to Ship: 10 Day(s) -
Expanding Diamond Core Drill (Exclusively for Rotating)
HOUSE BM
[Features]
· For drilling holes in hard ceramic sidings, hard mortar, blocks, reinforced concrete, Asloc boards, etc.Standard Price: MYR 2,174.01- Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOUSE BM | MIYANAGA | HOUSE BM | MIYANAGA | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | MIYANAGA | MIYANAGA | MIYANAGA | MIYANAGA | MIYANAGA | MIYANAGA | SANKO TECHNO | HOUSE BM | HOUSE BM | HOUSE BM | LOBTEX | MIYANAGA | MIYANAGA | SANKO TECHNO | SANKO TECHNO | TRUSCO NAKAYAMA | UNIKA | UNIKA | UNIKA | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM | HOUSE BM |
| Product Series | Poly-Click Series, Dry Type, Diamond Core Drill Bits for Blocks | Combined Rotating and Vibrating Core Drill (Combined Rotating and Vibrating) | All Core Drill L150 Series LS Type (For Rotary Drill / SDSplus Shank) | Z Axis Piping Core Drill (SDS type) (Lightweight Hammer Drill) | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 9 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Core Drills (Tip Tools)
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy