(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Threaded Inserts
These generally have embedded male threads. Coil shapes are inserted with a dedicated tool, press-fit into a collar, or mounted while self-tapping threads.
Choose a shape to suit the application. Some items require dedicated tools.
| Days to Ship |
|
|---|
-
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Standard Price: MYR 4.23- Days to Ship: 1 Day(s) or more -
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Standard Price: MYR 12.70- Days to Ship: 4 Day(s) or more -
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: MYR 5.05- Days to Ship: 1 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Standard Price: MYR 0.71- Days to Ship: 1 Day(s) or more -
Ensat Chip Free Short Type, Model 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
Ensat Chip Free Long Type, Model 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
IMAO
Able to reinforce screw parts which have a high frequency of bolt attachment/removal, and any base metal screw parts. Can even be utilized for restoring damaged screws.
[Features]
· Simply insert the key to prevent loosening.
· Can quickly repair damaged screws.
· Suitable for use in places with a high frequency of bolt attachment/removal.
· Can reinforce all types of base metal screw except for iron, non-ferrous metal, and non-metallic types.Standard Price: MYR 70.33- Days to Ship: 7 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Ensat Expanded Slot Type, Model 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 3.09- Days to Ship: 1 Day(s) or more -
Thread Inserts, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
Standard Price: MYR 2.53- Days to Ship: 6 Day(s) -
E-Certs【1-100 Pieces Per Package】
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 3.36- Days to Ship: 2 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Standard Price: MYR 5.48- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: MYR 20.15- Days to Ship: 6 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
These inserts are the best choice for easy and secure fitment into plastic holes.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
Standard Price: MYR 5.33- Days to Ship: 4 Day(s) or more -
Ensat 3 Holes Short Type, Model 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.83- Days to Ship: 5 Day(s) or more -
ACCURATE
· Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.
· Newly-developed insertion tool reduces mistakes and increases speed of work.Standard Price: MYR 3.50- Days to Ship: 8 Day(s) or more -
Thread Insert (Box), Economy series【100 Pieces Per Package】
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Standard Price: MYR 113.52- Days to Ship: 6 Day(s) -
Recoil Packet (UNC)【5-10 Pieces Per Package】
RECOIL
*Unfortunately, only lengths of 1.5D are available.
Standard Price: MYR 29.36- Days to Ship: 4 Day(s) or more -
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.50- Days to Ship: 5 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
Standard Price: MYR 5.27- Days to Ship: 5 Day(s) or more -
E-Sert (Other Fine)【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 20 24 30 33 42 52Standard Price: MYR 4.84- Days to Ship: 5 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.30- Days to Ship: 4 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.37- Days to Ship: 11 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 189.21- Days to Ship: 2 Day(s) or more -
C Lock (CL Type)【100 Pieces Per Package】
BOHSEI
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Standard Price: MYR 54.83- Days to Ship: 5 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.80- Days to Ship: 11 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 5.78- Days to Ship: 11 Day(s) or more -
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing- Volume Discount
Standard Price: MYR 1.61- Days to Ship: 4 Day(s) or more -
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: MYR 2.01- Days to Ship: 4 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 6.01 Days to Ship: 5 Day(s) or more -
Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】
TOKAI
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.02- Days to Ship: 5 Day(s) or more -
Recoil-Free (Specified mm) SUS304
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Standard Price: MYR 11.10- Days to Ship: 7 Day(s) or more -
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Standard Price: MYR 7.78 Days to Ship: 4 Day(s) or more -
Recoil Packet for Spark Plugs【10 Pieces Per Package】
RECOIL
The spark plug kit contains a pilot tap. Thread diameter (after insertion) M (mm) 14 types: Threaded insert / Thread type: Fine / Material: SUS304 / Unit of purchase: Box/pack
Standard Price: MYR 100.52- Days to Ship: 4 Day(s) or more -
Recoil Packet (METRIC)【10 Pieces Per Package】
RECOIL
[Features]
· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.
· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.
· Once equipped, its spring effect makes it almost permanently non-extractable.Standard Price: MYR 110.13- Days to Ship: 7 Day(s) or more -
Brass Ensat Thread Plastic Deformation Type, Model 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: MYR 2.93- Days to Ship: 5 Day(s) or more -
Steel Ensat With Pin Short Type, Model 317
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 30.90- Days to Ship: 5 Day(s) or more -
Steel Ensat With Pin Long Type, Model 318
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 30.95- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7Standard Price: MYR 2.12- Days to Ship: 5 Day(s) or more -
Heat-Lok (HL Type)【1-1,000 Pieces Per Package】
JAPAN_DRIVEIT
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 42.75- Days to Ship: 5 Day(s) or more -
![[Metric] Recoil Kit with Tap (Coarse) EA949VA-16A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804293.jpg?$product_view_b$)
[Metric] Recoil Kit with Tap (Coarse) EA949VA-16A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , recoil tap
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-M16-2.0(coarse)
・Use a tap holder esparately
・No. of recoils-6 pcsStandard Price: MYR 832.91 Days to Ship: 9 Day(s) or more -
Recoil Thread Insert Tool EA949VC-16A
ESCO
【Product Specifications】
・Use this tool when inserting a recoil insert.
・For dim. other than metric dim., refer to the following separate table.
・Dim. -Metric：M16-1.5・2.0, UNC/BSW：5/8", UNF：5/8"Standard Price: MYR 242.94 Days to Ship: 9 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
![[Metric] Recoil Kit with Tap (Coarse) EA949VA-16A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804293.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | MISUMI | TOKAI | KKV | KKV | IMAO | HIROSUGI-KEIKI | KKV | MISUMI | TSUGAMI | TOKAI | RECOIL | MISUMI | TOKAI | RECOIL | KKV | ACCURATE | MISUMI | RECOIL | KKV | TSUGAMI | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | MISUMI | BOHSEI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | NIPPON SPREW | TSUGAMI | TOKAI | RECOIL | RECOIL | RECOIL | RECOIL | KKV | KKV | KKV | JAPAN_DRIVEIT | JAPAN_DRIVEIT | SUNCO | ESCO | ESCO |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】 | Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 1 Day(s) or more | 6 Day(s) | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 6 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 1.6 ～ 8 | 3 ～ 12 | 3 ～ 16 | 4 ～ 24 | 2.6 ～ 8 | 2.5 ～ 27 | 3 ～ 16 | 2 ～ 24 | 2 ～ 8 | 3 ～ 16 | 3 ～ 12 | 2 ～ 10 | 3 ～ 16 | 3 ～ 16 | 3 ～ 6 | 3 ～ 8 | - | 3 ～ 16 | 10 ～ 16 | 10 ～ 33 | 1.4 ～ 5 | 1.4 ～ 5 | 3 ～ 8 | 2 ～ 6 | 2.6 ～ 8 | 2.6 ～ 8 | 2 ～ 5 | 2 ～ 30 | - | 2.6 ～ 8 | 12 | - | 14 | 2 | 3 ～ 6 | 4 ～ 14 | 4 ～ 16 | 2 ～ 6 | 3 ～ 6 | 2 ～ 36 | - | - |
| Environmentally friendly | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) / Not RoHS Compliant | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Standard | Standard | Self-Tapping | Standard | Self-Tapping | Self-Tapping | Key Lock | Self-Tapping | Self-Tapping | Standard | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Press Fit | Press Fit | Standard | Press Fit | Self-Tapping | Self-Tapping | Press Fit | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Self-Tapping | Press Fit | Press Fit | Standard | - | - |
| Characteristics/Applications | Not Applicable | - | Not Applicable | - | - | - | - | - | - | Not Applicable | - | - | - | Clean Washed | - | - | - | - | Not Applicable | - | - | - | - | - | - | Not Applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Nitrox 60 | Steel / Stainless Steel (SUS303/304) | Brass | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) / Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS316) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) / Phosphor Bronze | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Steel | Steel | Brass | Brass | Stainless Steel (SUS303/304) | - | - |
| Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - |
| Length L (after insertion) (D = Thread Dia. M) | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1.5D | - | 1D / 2D | - | - | - | 2D | 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | - | - |
| Application | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | - | - | Light Metal / Cast Iron / Resin General / Wood | Cast Iron | - | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Resin General | Light Metal | Light Metal | Resin General | Light Metal | - | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | - | Light Metal / Cast Iron / Resin General | - | Light Metal | Light Metal | Light Metal | Resin General | Light Metal | Cast Iron | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Light Metal | Light Metal | - | - | - | - | - | - | Resin General | - | - | - |
| Notch | Provided | Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | - | Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | - | - | Provided | Provided | - | Provided | Provided | Not Provided | Not Provided | Provided | - | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided | Provided | - | - | - | - | - | Not Provided | Not Provided | Provided | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #12-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5/16-18 | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | Slotted | Standard | Tip Free Type | Tip Free Type | - | Slotted | Slotted | - | - | Standard | - | Slotted | Standard | - | 3-Hole Type | - | - | - | 3-Hole Type | - | - | Standard | Standard | - | Standard | Slotted | Slotted | Standard | - | - | Standard | - | - | - | - | Standard | With Pin Type | With Pin Type | Standard | Standard | Standard | - | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
![[Metric] Recoil Kit with Tap (Coarse) EA949VA-16A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005804293.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
-
Screw Type
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
-
Cleaning Method
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Threaded Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy