(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Insert
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Standard Price: MYR 4.23- Days to Ship: 1 Day(s) or more -
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Standard Price: MYR 12.70- Days to Ship: 4 Day(s) or more -
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: MYR 5.05- Days to Ship: 1 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Standard Price: MYR 0.71- Days to Ship: 1 Day(s) or more -
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *For applicable products, please see the specification list or catalog PDF
- Volume Discount
Standard Price: MYR 102.97- Days to Ship: 2 Day(s) or more -
Ensat Chip Free Short Type, Model 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 3.48- Days to Ship: 11 Day(s) or more -
Ensat Chip Free Long Type, Model 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
IMAO
Able to reinforce screw parts which have a high frequency of bolt attachment/removal, and any base metal screw parts. Can even be utilized for restoring damaged screws.
[Features]
· Simply insert the key to prevent loosening.
· Can quickly repair damaged screws.
· Suitable for use in places with a high frequency of bolt attachment/removal.
· Can reinforce all types of base metal screw except for iron, non-ferrous metal, and non-metallic types.Standard Price: MYR 70.33- Days to Ship: 7 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.28- Days to Ship: 11 Day(s) or more -
Ensat Expanded Slot Type, Model 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 3.09- Days to Ship: 1 Day(s) or more -
Tangless Inserts Installation/Removal Tools
MISUMI
Due to changes in manufacturer standards, the color of the cap may vary. Thank you for your understanding. There is no change in performance.
- Volume Discount
Standard Price: MYR 667.34 Days to Ship: 2 Day(s) or more -
Thread Inserts, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
Standard Price: MYR 2.53- Days to Ship: 6 Day(s) -
MISUMI
There is no need to break the tongue after insertion, making the insertion process easy
[Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.- Volume Discount
Standard Price: MYR 6.80- Days to Ship: 2 Day(s) or more -
E-Certs【1-100 Pieces Per Package】
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 3.36- Days to Ship: 2 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Standard Price: MYR 5.48- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: MYR 20.15- Days to Ship: 6 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
These inserts are the best choice for easy and secure fitment into plastic holes.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
Standard Price: MYR 5.33- Days to Ship: 4 Day(s) or more -
Ensat 3 Holes Short Type, Model 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.83- Days to Ship: 5 Day(s) or more -
MISUMI
Extraction tool for threaded inserts
- Volume Discount
Standard Price: MYR 123.57- Days to Ship: 2 Day(s) or more -
RECOIL
[Features]
·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
·Dedicated tools enable the insertion and extraction without tangs.
·Extraction will not damage the male threads nor the product.
·You don't have to tear off the tang, look for the broken tang, or check the gauge.Standard Price: MYR 3.46- Days to Ship: 4 Day(s) or more -
Thread Insert Installation Tool
MISUMI
[Specification expansion] In response to many requests, a new standard product has been released!
- Volume Discount
Standard Price: MYR 370.67- Days to Ship: 2 Day(s) or more -
Self-Tapping Inserts - Hand Tools for Self-Tapping Inserts
MISUMI
Compatible threaded inserts are M3, 4, 5, 6, 8, 10 and 12.
- Volume Discount
Standard Price: MYR 410.15- Days to Ship: 1 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 256.06- Days to Ship: 4 Day(s) or more -
Tangless Insert Metric Coarse【1-50 Pieces Per Package】
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
ACCURATE
· Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.
· Newly-developed insertion tool reduces mistakes and increases speed of work.Standard Price: MYR 3.50- Days to Ship: 8 Day(s) or more -
Thread Insert (Box), Economy series【100 Pieces Per Package】
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Standard Price: MYR 113.52- Days to Ship: 6 Day(s) -
Recoil Packet (UNC)【5-10 Pieces Per Package】
RECOIL
*Unfortunately, only lengths of 1.5D are available.
Standard Price: MYR 29.36- Days to Ship: 4 Day(s) or more -
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.50- Days to Ship: 5 Day(s) or more -
Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only)
ACCURATE
Pre-winder type Tangless insert dedicated tool for Tangless insert insertion work.
[Features]
·It can be used for both free type and locking type insertion work.
·It can be used for insertion even under severe insertion conditions that are difficult for normal insertion tools (mandrel type).
[Applications]
·It is used for applying surface treatments such as alodine treatment or anodizing to the base material after tapping the pilot hole.
·It is ideal for the case where the pilot hole processing diameter is expected to be smaller than the specified value due to soft resin.
·It can be used for insertion work where friction with the base metal may become excessive during insert insertion.Standard Price: MYR 1,860.39- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 398.84- Days to Ship: 9 Day(s) or more -
ACCURATE
"All-in-One" Tool and Ball Used For Work Including Pilot Hole Work and Insertion
Standard Price: MYR 810.44 Days to Ship: 4 Day(s) or more -
IMAO
[Features]Mounting tool for KIC (Key Lock Insert). [Specifications]Material: SUJ2
Standard Price: MYR 335.48- Days to Ship: 8 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
Standard Price: MYR 5.27- Days to Ship: 5 Day(s) or more -
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
[Features]
· A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.
· The following parts are included in the red plastic box.
· Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).
· The spark plug kit includes a pilot tap.
· The pilot tap does not use a drillStandard Price: MYR 312.11- Days to Ship: 9 Day(s) or more -
RECOIL
A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
Standard Price: MYR 426.43- Days to Ship: 4 Day(s) or more -
SUNCO
It is a tool that folds the tang after inserting the sprue.
Press the tip against the tang and lightly hit the head with a hammer to easily break off at the notch.
In addition, the snapped-off tang attaches to the magnet for confirmation on the spot.
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20
[Nominal W] #2-56, #4-40, #5-40, #6-32, #8-32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4Standard Price: MYR 141.94- Days to Ship: 5 Day(s) or more -
E-Sert (Other Fine)【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 20 24 30 33 42 52Standard Price: MYR 4.84- Days to Ship: 5 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.30- Days to Ship: 4 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.37- Days to Ship: 11 Day(s) or more -
Insert Nut, Screw-in Type, Insertion Jig, Dedicated for Without Slot / IR-00
HIROSUGI-KEIKI
* Only products without slits can be used.
Applicable Product Numbers: IRB-W, IRB-CW, IRB, IRB-C, IRU-W, IRU, IRL-KW, IRL-BW, IRL-K, IRL-BStandard Price: MYR 719.24- Days to Ship: 11 Day(s) or more -
Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R
HIROSUGI-KEIKI
* Only products with slits can be used.
Applicable Product Numbers: IRB-SW, IRB-SCW, IRU-SW, IRB-S, IRB-SC, IRU-SStandard Price: MYR 87.21- Days to Ship: 17 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | MISUMI | TOKAI | MISUMI | KKV | HIROSUGI-KEIKI | KKV | IMAO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KKV | MISUMI | MISUMI | MISUMI | TSUGAMI | TOKAI | RECOIL | MISUMI | TOKAI | RECOIL | KKV | MISUMI | RECOIL | MISUMI | MISUMI | MISUMI | ACCURATE | ACCURATE | MISUMI | RECOIL | KKV | ACCURATE | SUNCO | ACCURATE | IMAO | TSUGAMI | RECOIL | RECOIL | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only) | Insert Nut, Screw-in Type, Insertion Jig, Dedicated for Without Slot / IR-00 | Insert Nut Threaded Type Insert Jig Slotted Dedicated / IR-00S IR-00R | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 6 Day(s) | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | 6 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 17 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 1.6 ～ 8 | 3 ～ 16 | 3 ～ 12 | 2 ～ 8 | 3 ～ 16 | 4 ～ 24 | 2.6 ～ 8 | 2 ～ 8 | 2.5 ～ 27 | - | 3 ～ 16 | 2.5 ～ 10 | 2 ～ 24 | 2 ～ 8 | 3 ～ 16 | 3 ～ 12 | 2 ～ 10 | 3 ～ 16 | 3 ～ 16 | - | 2.5 ～ 12 | 3 ～ 16 | - | 2.5 ～ 8 | 2 ～ 24 | 3 ～ 6 | 3 ～ 8 | - | 3 ～ 16 | - | - | - | - | 10 ～ 16 | - | 6 ～ 14 | 2 ～ 16 | 10 ～ 33 | 1.4 ～ 5 | 1.4 ～ 5 | - | - |
| Environmentally friendly | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) / Not RoHS Compliant | - | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Standard | Standard | Self-Tapping | Standard | Tool | Self-Tapping | Self-Tapping | Self-Tapping | Key Lock | Self-Tapping | Self-Tapping | Self-Tapping | Tool | Standard | Tangless | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Self-Tapping | Tool | Tangless | Tool | Tool | Tangless | Tangless | Standard | Standard | Standard | Self-Tapping | Tool | Tool | Tangless | Tool | Standard | Tool | Tool | Tool | Standard | Press Fit | Press Fit | Tool | Tool |
| Characteristics/Applications | Not Applicable | - | Not Applicable | - | - | - | - | - | - | - | - | - | - | Not Applicable | Not Applicable | - | - | - | Clean Washed | - | - | - | - | - | - | - | - | - | - | Not Applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Nitrox 60 | Steel / Stainless Steel (SUS303/304) | Brass | - | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) / Brass | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS316) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | - | Stainless Steel (SUS303/304) | - | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | - | - | - | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Brass | Brass | - | - |
| Screw Type | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | - | Unified (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Fine) Thread | - | - | Metric (Coarse) Thread / Unified (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - |
| Length L (after insertion) (D = Thread Dia. M) | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | 1D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D | - | - | - | 1.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | - | - |
| Application | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | Light Metal / Cast Iron / Resin General | - | Cast Iron | - | Light Metal / Cast Iron / Resin General / Wood | Cast Iron | Light Metal | - | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Light Metal | Light Metal | Resin General | Light Metal | - | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal / Cast Iron / Resin General | - | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | - | - | - | - | - | Light Metal / Cast Iron / Resin General | - | - | - | - | Light Metal | Light Metal | - | - |
| Notch | Provided | Provided | Not Provided | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided | Not Provided | - | - | Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | - | - | Not Provided / Provided | Not Provided | - | Not Provided | Not Provided | - | Provided | Provided | - | - | - | - | - | Provided | - | - | - | Provided | Not Provided | Not Provided | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #12-24 | - | - | 1/2 ～ #10-24 | - | - | - | - | - | 1/4 ～ #8-32 | - | - | - | - | - |
| Shape | - | - | Slotted | Standard | - | Tip Free Type | Standard | Tip Free Type | - | Slotted | Standard | Slotted | - | - | - | - | Standard | - | Slotted | Standard | - | 3-Hole Type | - | - | - | - | - | - | - | - | - | 3-Hole Type | - | - | - | - | - | - | - | - | - | Standard | Standard | - | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | - | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
-
Screw Type
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
-
Cleaning Method
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy