(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Holder
Search by specifying the lower class category
Mirror Holders
Cross Motion Holder
Cross Motion Adaper
Lens Holders
Polarizer Holders
Prism Holders
Filter Holders
Pin Holes, Diaphragms
Laser Holders- Fixed Holders, Holder Accessories
Opt Station Units
| Days to Ship |
|
|---|
-
CHUOSEIKI
[Features]
· A stand for attaching and positioning the "Tool Scope" working-microscope.
· As functions of the stand, products with one or three movement directions, products with a wide movement range, and products capable of fixing a sample stage, etc., are available.
· Includes a ø30H8 lens barrel holder to which the tool scope can be fixed.
· Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.- CAD ：
- 2D
Standard Price: MYR 2,455.50- Days to Ship: 7 Day(s) or more -
Compact Mirror Holder (Optical Axis 25 mm Type)
SURUGA SEIKI
A mirror holder with an optical axis height of 25 mm. For use with the Opt Station. Select the most appropriate mounting method so that the held element does not distort when mounted. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 768.90- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
[Features]
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.Standard Price: MYR 975.61- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
A holder that can hold small mirrors up to ø30. The tilt can be adjusted in the two axes.
[Features]
· The fine-movement resolution is 0.7°/rotation, two times that of F58N.
· Adhesive type and three-point support type fixing are available for the mirror fixing methods.
· Both the adhesive and screw types are available with or without a rod.
· With the rod-less type, M3 or M6 screws are used for fixing.
· With the three-point support type, mirrors from ø20 to ø30 mm can be fixed by replacing the pins on two of the points.Standard Price: MYR 642.30- Days to Ship: 22 Day(s) or more -
CHUOSEIKI
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- CAD ：
- 2D
Standard Price: MYR 1,584.42- Days to Ship: 6 Day(s) or more -
CHUOSEIKI
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- CAD ：
- 2D
Standard Price: MYR 482.07- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
[Features]
· The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
· Replace the lens and/or adapter to allow for use in different types of application.Standard Price: MYR 3,939.61- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 4,765.03- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 387.84 Days to Ship: 28 Day(s) or more -
Standard Price: MYR 578.06- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· A Chip Carrier type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
· There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.Standard Price: MYR 4,444.78 Days to Ship: 28 Day(s) or more -
SURUGA SEIKI
[Features]
· A To-Package type LD holder with a built-in Peltier element.
· Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
· Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
· For common anodes and common cathodes, etc., configure by replacing the jumper pins.
· For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
· The F129-1 water cooling adapter is also available.
· Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.Standard Price: MYR 4,444.78 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 52.04- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 704.35 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 3,827.32 Days to Ship: 28 Day(s) or more -
SURUGA SEIKI
Can be used for optical system constructions.
[Features]
· Used for adjusting the optical axis when building an optical system for the Opt Station.
· Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
· Return the pin upward to install in any position.
· The mark on the target is adjusted to a height of 45 mm.
· Target stickers (black cross on a white base / white cross on a black base) are included.Standard Price: MYR 641.06 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 781.48 Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
[Features]
· An adapter for optical fiber connectors.
· An FC type receptacle is included as standard, so please select according to the connector.
· The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.Standard Price: MYR 514.44 Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 292.89 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.
[Features]
■ F50, F55
· Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
· Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
· Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
· Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
■ F52
· A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
· The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
· A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
· Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.Standard Price: MYR 1,414.06- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· Used for fixing round/square lenses or cylindrical/rectangular items of any size.
· The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.
· The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.Standard Price: MYR 520.05- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 767.97 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· Can adjust the tilt angle of small sensors and laser pointers.
· P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.Standard Price: MYR 959.12 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· An adapter for holding round sensors and lasers.
· The adapter thickness has been set to 12 mm, increasing the holding force.
· Specify the ø diameter when ordering.Standard Price: MYR 325.16 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A dedicated mirror holder for ø12.7 mm. The operation screws are available as knurled knob types that can be operated by hand, or as set bolt types which embed into equipment and are used to prevent mis-operation.
[Features]
· Has been designed from scratch with a focus on high performance and being small.
· While the main body is of a compact size that can be installed in a space of one cubic inch, the meander width and hysteresis width of the two axes, θy and θz, have been kept to an order of just a few μrad. The stability of 60 hours (at room temperature) after positioning is the best in its class.
· Mount using a single M4 screw. Features a step to stop rotation.
· A mounting plate type that can be installed at 0° and 45° angles is also available.
· When using a plate, the rod axis and the mirror reflecting surface are the same.Standard Price: MYR 894.57 Days to Ship: 28 Day(s) or more -
SURUGA SEIKI
[Features]
· A holder for fixing commercially available power meter sensors.
· Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
· Fixing is done using a method of sandwiching with screws from the top.
· Sensors that can be fixed are of limited availability.
· Can be directly mounted onto bases with the rods removed.Standard Price: MYR 649.77 Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
[Features]
· Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
· The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
· Adhesive fixing and three-point support fixing types are available for the mirror.
· The lower side of the pole is an M16P (= 1 mm) male screw.
· Can be fixed to magnetic bases and plates, etc.Standard Price: MYR 2,010.22- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
· Pin holes with an external diameter of ø16 mm can be used.
· Fix pin holes with an M20P = 0.5 threaded ring.
· The optical axis central height is standardized at 25 mm from the bottom.Standard Price: MYR 2,669.21 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 261.24 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
- CAD ：
- 2D
Standard Price: MYR 387.84 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
· Move the upper sliding part to fix the prism.
· Use the upper knob to fix without having to move the element.
· The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
· F552-20 can be finely adjusted.
· The elements are positioned using the pins in the three locations.Standard Price: MYR 515.70- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· Can be fitted with 40 mm stages and holders for Opt Stations, etc.
· Can be arranged as needed and mounted to cross clamps, etc.Standard Price: MYR 265.42- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 839.68- Days to Ship: 10 Day(s) or more -
SURUGA SEIKI
A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 1,023.36- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
- CAD ：
- 2D
Standard Price: MYR 405.68- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
Used for fixing circular items such as lenses, mirrors, and filters etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 250.14- Days to Ship: 4 Day(s) or more -
SURUGA SEIKI
An adapter for lenses with an outer diameter of ø10 mm, ø12.7 mm, ø15 mm, ø20 mm, and ø25.4 mm. Used by attaching to various types o cross motion holder.
[Features]
· Used by attaching to various types of cross motion holder. Various types of single lens.
· Lens attachment and detachment is carried out using a threaded ring system.
Note: Includes threaded rings and resin rings.
Note: A ring wrench for tightening threaded rings.Standard Price: MYR 261.24 Days to Ship: 4 Day(s) or more -
Small Upward Operation Mirror Holder
SURUGA SEIKI
A top operated mirror holder with excellent stability and operability. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
Standard Price: MYR 1,531.95- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
An adapter that can retain polarizing prisms and other similar items. Can be mounted to polarizer holders. Can be mounted to holders for F62, F63 and F64 elements which have a diameter of ø30.
Standard Price: MYR 451.77 Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
· Can be manually rotated 360°.Standard Price: MYR 1,215.44- Days to Ship: 22 Day(s) or more -
Polarizer holder (optical axis: 25mm)
SURUGA SEIKI
[Features]
· A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
· The optical axis height is standardized at 25 mm from the bottom.
· Uses a threaded ring to fix devices.
· An M4 male-threaded rod is attached.Standard Price: MYR 1,022.42 Days to Ship: 28 Day(s) or more -
Polarizer holder (optical axis: 25mm with fine adjustment)
SURUGA SEIKI
[Features]
· A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
· The optical axis height is standardized at 25 mm from the bottom.
· Uses a threaded ring to fix devices.
· An M4 male-threaded rod is attached.Standard Price: MYR 1,782.67- Days to Ship: 22 Day(s) or more -
Cross movement holder (□60 type)
SURUGA SEIKI
[Features]
· A holder that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
· 0.5 mm screws are used for the fine movement parts.
· The F02-1E has a thickness of just 10 mm, and so is ideal for use in tight spaces or in close proximity to other types.
· For the F02-1E type, fine movement of the YZ axes can be made using the operating screw. For the F02-4E type, fine movement of the Yzθyθz axes can be madeStandard Price: MYR 1,786.10- Days to Ship: 4 Day(s) or more -
Cross movement holder plate type
SURUGA SEIKI
[Features]
· A holder that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
· A plate type cross motion holder with good stability and which can be used for experiments with low optical axes.
· 0.5 mm screws are used for the fine movement parts.
· For the F02-1E type, fine movement of the YZ axes can be made using the operating screw. For the F02-4E type, fine movement of the Yzθyθz axes can be madeStandard Price: MYR 1,849.39- Days to Ship: 22 Day(s) or more -
SURUGA SEIKI
[Features]
· The mounting position of various types of adapter plate can by adjusted in the YZ axes.
· Since the mounting position is fixed with screws, it will not move after being fixed.
· Since the adapter plate is mounted using screws in two locations on the bottom side and there is no obstruction on the upper side, it is easy to handle from the top.
· Use where no changes will be made once adjusted, such as adjusting the optical axis of lenses.Standard Price: MYR 387.84 Days to Ship: 22 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Holder Type |
| Optical Element Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CHUOSEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | CHUOSEIKI | CHUOSEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 28 Day(s) or more | 22 Day(s) or more | 28 Day(s) or more | 22 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 28 Day(s) or more | 22 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 28 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 10 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 28 Day(s) or more | 22 Day(s) or more | 4 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more |
| Holder Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Optical Element Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Holder Type
-
Optical Element Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Holder
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy