(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
CHUOSEIKI Holder
Search by specifying the lower class category
Mirror Holders
Cross Motion Holder
Lens Holders
Polarizer Holders
Prism Holders
Fixed Holders, Holder Accessories
Opt Station Units
| Days to Ship |
|
|---|
-
CHUOSEIKI
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- CAD ：
- 2D
Standard Price: MYR 1,584.42- Days to Ship: 6 Day(s) or more -
CHUOSEIKI
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- CAD ：
- 2D
Standard Price: MYR 482.07- Days to Ship: 4 Day(s) or more -
CHUOSEIKI
[Features]
· A three-point support type mirror holder.
· The sample is fixed using set screws and a pad (round and square types only).
· The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
· The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
· The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).- CAD ：
- 2D
Standard Price: MYR 636.03- Days to Ship: 20 Day(s) or more -
CHUOSEIKI
[Features]
· The mirror holder fixes optical devices by affixing them. As such, it can be used with both circular and rectangular shaped objects.
· A kinematic type in which the tilt can be adjusted using the inclined fulcrum (right-top) as a guide.
· Available with a shaft (ø8 mm, length 60 mm) or with a base plate (long hole for M6 screws).Standard Price: MYR 633.86- Days to Ship: 4 Day(s) or more -
CHUOSEIKI
[Features]
· A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
· Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
"Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- CAD ：
- 2D
Standard Price: MYR 321.57- Days to Ship: 7 Day(s) or more -
CHUOSEIKI
[Features]
· For finely moving pin holes, lenses, fibers, and other similar items within the vertical plane of the optical axis.
· A product in which fine movement is carried out in the XY2 directions. Products in which tilt adjustment is possible in two directions in addition to the XY2 directions are available.- CAD ：
- 2D
Standard Price: MYR 3,134.36 Days to Ship: 15 Day(s) or more -
Standard Price: MYR 308.02- Days to Ship: 7 Day(s) or more -
CHUOSEIKI
[Features]
· A coaxial lens holder. Ideal for replacing the lens after the optical axis has been aligned. The center does not shift because the lens is fixed using three support rods.- CAD ：
- 2D
Standard Price: MYR 1,137.26- Days to Ship: 14 Day(s) or more -
CHUOSEIKI
[Features]
· The HL-C30, HL-C70, and HL-C100 are lens holders with grooves for fixing lenses. There are three products available depending on the maximum size of the object that can be fixed.- CAD ：
- 2D
Standard Price: MYR 512.67- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 575.13- Days to Ship: 4 Day(s) or more -
CHUOSEIKI
[Features]
· A holder for circular lenses (can also be used with mirrors).
· Metal frame and shaft only. Does not include a tilt adjustment function.- CAD ：
- 2D
Standard Price: MYR 550.13 Days to Ship: 12 Day(s) or more -
Standard Price: MYR 1,262.80 Days to Ship: 19 Day(s) or more -
CHUOSEIKI
[Features]
· The POH-30, POH-50 hold polarizing plates and wave plates and is used for the adjustment of polarizing surfaces, etc.
· For devices such as Glan-Thompson prisms and wave plates with small external shapes, combine with an adapter for polarizer element holders.
· When the coarse movement clamp is loosened, it can move coarsely over 360°. When the coarse movement clamp is tightened, it can perform fine adjustments on the micrometer head.
· Since the scale ring moves independently, the zero point can be set to any angle.
· The C-301- (1) is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.- CAD ：
- 2D
Standard Price: MYR 2,388.59 Days to Ship: 14 Day(s) or more -
CHUOSEIKI
[Features]
· HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
· HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).- CAD ：
- 2D
Standard Price: MYR 322.81- Days to Ship: 4 Day(s) or more -
CHUOSEIKI
[Features]
· A Duracon® ring set consisting of a press ring and cushioning material.
"Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- CAD ：
- 2D
Standard Price: MYR 101.04- Days to Ship: 7 Day(s) or more -
CHUOSEIKI
[Features]
· A ring wrench that uses bits.
· Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
· The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.- CAD ：
- 2D
Standard Price: MYR 196.03 Days to Ship: 4 Day(s) or more -
TV adapter with cross interoperability for microscope use
CHUOSEIKI
[Features]
· An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
· Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
· A scale plate can be projected at the same time.
· Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.- CAD ：
- 2D
Standard Price: MYR 2,257.76 Days to Ship: 7 Day(s) or more -
CHUOSEIKI
[Features]
· A Y type aluminum rail.
· Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
· Can be used with a lower optical axis than X types.
· The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
· With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
· Includes memory with scale.- CAD ：
- 2D
Standard Price: MYR 2,318.13 Days to Ship: 34 Day(s) or more -
CHUOSEIKI
[Features]
· An X type aluminum rail.
· Slides using a dedicated carrier.
· Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
· Includes memory with scale.
· Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
· X type rails can be fixed and retained using rail stands or T type carriers.- CAD ：
- 2D
Standard Price: MYR 987.85 Days to Ship: 14 Day(s) or more -
CHUOSEIKI
[Features]
· Rails with a cross-section of 20 mm × 10 mm. Used in the configuration of systems such as those for small optical parts and small equipment etc.
· Use M6 screws to fix to surface plates etc.
· There are two types of dedicated rail carrier available; large and small. Can be used with M6 and M2 screws, etc.- CAD ：
- 2D
Standard Price: MYR 164.02- Days to Ship: 7 Day(s) or more -
CHUOSEIKI
[Features]
· Capable of moving in three axes; the XYZ axes.
· Includes a ø30H8 lens barrel holder to which the tool scope can be fixed. [Applications] A stand for attaching the "Tool Scope" working-microscope.- CAD ：
- 2D
Standard Price: MYR 2,661.77 Days to Ship: 7 Day(s) or more -
Kinematic Square Mirror Holder
CHUOSEIKI
[Features]
· A three-point support type mirror holder.
· The sample is fixed using set screws and a pad (round and square types only).
· The set screw can be turned using a straight slot flathead screwdriver (not included).
· For square optical devices. The tilt can be adjusted in the two axial directions.- CAD ：
- 2D
Standard Price: MYR 636.35- Days to Ship: 14 Day(s) or more -
Kinematic Groove Mirror Holder
CHUOSEIKI
[Features]
· A three-point support type mirror holder.
· The set screw can be turned using a straight slot flathead screwdriver (not included).
· For rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).
· For rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).- CAD ：
- 2D
Standard Price: MYR 636.66- Days to Ship: 20 Day(s) or more -
CHUOSEIKI
[Features]
· The IR-P1 tilting/rotating prism holder can be used with prisms up to 25 mm in size.
· The IR-P1 tilting/rotating prism holder is a prism holder that features dual-axis tilt adjustment and single-axis rotation adjustment capabilities. It also features less protrusion from the main body than conventional types and can be used to install prisms without taking up space.- CAD ：
- 2D
Standard Price: MYR 2,269.91 Days to Ship: 25 Day(s) or more -
Tilting/Rotating Camera Holder A
CHUOSEIKI
[Features]
· IR-CA Tilting/Rotating Camera Holder A can be used to hold cameras with tripod holes. It features dual-axis tilt adjustment and single-axis rotation adjustment capabilities.- CAD ：
- 2D
Standard Price: MYR 2,117.43 Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Holder Type |
| Optical Element Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI | CHUOSEIKI |
| Product Series | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 20 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 15 Day(s) or more | 7 Day(s) or more | 14 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 19 Day(s) or more | 14 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 34 Day(s) or more | 14 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 14 Day(s) or more | 20 Day(s) or more | 25 Day(s) or more | 4 Day(s) or more |
| Holder Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Optical Element Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy