(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
YUKIWA SEIKO Tooling-Related Equipment
| Days to Ship |
|
|---|
-
YUKIWA SEIKO
High accuracy, speedy with one-touch method.
It strongly supports labor-saving work.
[Features]
·Used on milling machines, drilling machines, and slotters, it can easily improve the efficiency of angle indexing work for cut workpieces, contributing greatly to labor-saving and rationalization of production systems.
·"Unclamping" → "Indexing" → "Clamping" can be automatically performed with one-touch operation by moving the lever of the manual indexing table back and forth with one hand.
·The clamp is extremely strong and the indexing accuracy is precise.
·The maximum number of divisions is 24, and the division position can be selected by flipping the "select pin" on the side of the table.
·The indexing position can be changed quickly and easily.Standard Price: MYR 11,721.08- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
[Features]
This product pursues high performance and high quality.
·Compatible collets: SG6,SG8,SG10,SG12,SG16,SG20,SG25,SG32
·Compatible wrenches: FS20,FS26,FS33,FS36,FS42,FS50,FS62,FS76Standard Price: MYR 259.27- Days to Ship: 10 Day(s) or more -
Super G1 Chuck Runout Adjuster Zero Finder
YUKIWA SEIKO
Supports a standard holder and achieves zero adjustment of the blade tip runout accuracy.
[Features]
· A controller that reduces cutting edge runout to effectively zero for the high accuracy Super G1 Chuck.
· Zerodas is a revolutionary product that does not sacrifice the balance of the holder and vibration of the blade base to ensure vibration of the cutting edge.
· Achieves zero cutting edge runout accuracy.
· Standard holder supported.
· Simple Operation, Attaching and DetachingStandard Price: MYR 1,795.33- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
[Features]
· Prevents adhesion of chips etc. on the screws of the holder body.
· Prevents oil scattering from groove portion of lock nut wrenchStandard Price: MYR 91.30- Days to Ship: 14 Day(s) -
YUKIWA SEIKO
·JBS and MAS standard pull studs.
·The shape of the pull stud is manufactured according to JIS and MAS standards.
Special sizes other than those listed above can be manufactured.Standard Price: MYR 176.69- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
for drill chucks.
[Features]
·The quality of a drill chuck is determined by factors such as core run-out accuracy, "grasping power" to grip the drill, and "durability" to maintain accuracy.
·Runout precision: We ensure a high accuracy that exceeds the run-out accuracy of the JIS standard.
·Gripping force: Outstanding technology and strict quality control ensure a stable and strong gripping force.
·endurance: Appropriate heat treatment provides excellent wear resistance and maintains accuracy for a long time.
·jacob stever hole: Since the taper hole is finished by grinding, the taper contact amount is extremely large and there is no slippage.Standard Price: MYR 40.50- Days to Ship: 9 Day(s) -
Electric Circular Dividing Table
YUKIWA SEIKO
[Features]
· Outstanding durability and high functionality. Super Divider greatly contributes to time saving in process transfer.Days to Ship: 11 Day(s) or more -
YUKIWA SEIKO
The pneumatic tailstock TPA/TPB series is an air-driven type basic tailstock (press cup).
Standard Price: MYR 11,685.56- Days to Ship: 14 Day(s) -
YUKIWA SEIKO
The pneumatic tailstock TSA/TSB series is a manual type basic tailstock (press cup). For machining 60°center holes close to the end face of a workpiece.
Standard Price: MYR 3,409.73- Days to Ship: 6 Day(s) or more -
YUKIWA SEIKO
[Features]
· Use side spindle SS series to support one end of the jig when performing multi-surface machining with a C-type jig.Standard Price: MYR 9,367.03- Days to Ship: 14 Day(s) -
YUKIWA SEIKO
[Features]
· For the chuck flange CF series, install the chuck flange between the table surfaces if attaching the scroll chuck to the CNC circular table or index plate.Standard Price: MYR 588.60- Days to Ship: 7 Day(s) or more -
YUKIWA SEIKO
It is easy to open and close the chuck. Simply insert the attached lever into the hole of the cap outer diameter and turn it. Easy to attach and detach workpieces.
Standard Price: MYR 1,408.14- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
[Features]
· The spring collet YSS series easily and accurately chucks round workpieces in machining that uses a circular table or indexing table.Standard Price: MYR 630.64- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
[Features]
· Can be easily used by attaching to a round table or index head table surface.Standard Price: MYR 1,364.95- Days to Ship: 14 Day(s) -
YUKIWA SEIKO
[Features]
Wrench for coolant seal screw compatible with CSE/CSH typeStandard Price: MYR 88.39 Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
For Super G1 Chuck
[Features]
· Supports high pressure coolant with a coolant seal screw as part of the setStandard Price: MYR 215.86- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
For Super G1 Chuck
[Features]
· Absorbs tool inclination and provides stable runout accuracy by setting an APM type length adjustment screwStandard Price: MYR 135.25- Days to Ship: 5 Day(s) or more -
Wrench for Length Adjustment Screw
YUKIWA SEIKO
[Features]
6 types of wrenches for coolant seal screws / length adjustment screws (APM type).
·Compatible screws: APM6,APM8-1 (2)/APM10-1 (2)/APM12-1 (2)/APM16-1 (2),APM20-1 (2)/APM25-1 (2)/APM32Standard Price: MYR 93.70- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
[Features]
This product pursues high performance and high quality.
·Compatible main bodies: SGC6,SGC8,SGC10,SGC12,SGC16,SGC20,SGC25,SGC32
·Compatible lock nuts: SGN6,SGN8,SGN10,SGN12,SGN16,SGN20,SGN25,SGN32Standard Price: MYR 68.71- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
[Features]
·Coolant duct for HSK holder
[Applications]
·Used by mounting inside HSK shank as a coolant supply port when using center through coolantStandard Price: MYR 351.76- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
[Features]
Special accessory for HSK holder
2 types for HSK40A-SR/HSK63A-SRStandard Price: MYR 527.73- Days to Ship: 11 Day(s) -
YUKIWA SEIKO
[Features]
Special accessory for HSK holder
Main body can be fixed vertically or horizontally.Standard Price: MYR 2,047.81- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
Clamping and unclamping can be done with a 120° rotation and the holder interchanged with a single action.
Standard Price: MYR 8,048.46- Days to Ship: 14 Day(s) -
YUKIWA SEIKO
[Features]
A NY-H type lock nut for EY tool holders.
·Type: M type / H type / F type
·Supported collets: EY11,EY12,EY16,EY20,EY25,EY32Standard Price: MYR 307.20- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 83.58- Days to Ship: 5 Day(s) or more -
Length Adjustment Screw With Sealing
YUKIWA SEIKO
[Features]
· A length adjustment screw with a urethane end face seal resistant to water-soluble and oil-based cutting fluids is incorporated, enabling processing without losing oil pressure.
· Replacing the length adjustment screw included in the BT shank, the EY chuck, and other standard components with this length adjustment screw plus seal allows lubrication to be sealed from the rear.
· Covers 5 mm or more oil hole drills: Ends of 5 to 20 mm oil hole drills can be sealed, enabling support of small diameter oil hole drills as wellStandard Price: MYR 105.00- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
[Features]
Single-end open-end wrench included to pencil mill chuck
Available for PCH6, PCH10Standard Price: MYR 103.41- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
Pull stud dedicated for center through type machining center.
[Features]
· Pull stud dedicated for center through type machining centerStandard Price: MYR 192.14- Days to Ship: 5 Day(s) or more -
YUKIWA SEIKO
Since the recommended torque has been set, lock nuts will not be overtightened.
Standard Price: MYR 1,220.13- Days to Ship: 9 Day(s) or more -
YUKIWA SEIKO
[Features]
2 types for collets and tool holders.
·Compatible chucks: TQC25/TQC35Standard Price: MYR 10,447.28- Days to Ship: 14 Day(s) -
Manual Locking System YHL-C For HSK Holder
YUKIWA SEIKO
[Features]
· Clamping and unclamping can be performed with a 120° rotation operation, enabling single-action holder replacement.Standard Price: MYR 9,829.45 Days to Ship: 14 Day(s) -
YUKIWA SEIKO
[Features]
Yukiwa Seiko, Tooling holder related equipment, locking parts (TQC25-SLP, TQC35-SLP)Standard Price: MYR 2,477.85- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO | YUKIWA SEIKO |
| Product Series | ||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 5 Day(s) or more | 9 Day(s) | 11 Day(s) or more | 14 Day(s) | 6 Day(s) or more | 14 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 14 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 14 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 14 Day(s) | 5 Day(s) or more |
| Spindle types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | HSK-A | HSK-A | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 40 ～ 63 | 40 ～ 63 | - | - | - | - | - | - | - | - | - | 63 | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Product Category | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Attachments/Accessories |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Machining Centers | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spindle types
-
HSK type
-
Tool Type
- drill
- Reamer
- Boring
-
Retainable blade diameter(mm)
-
Product Category
- Main Body
- Attachments/Accessories
- Measuring equipment
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
-
Chuck Type
- Side lock
-
Holder Length L(mm)
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Center Through (Blade Through)
Narrow search by specifying Manufacturer
-
- DAISHOWASEIKI (34)
- YUKIWA SEIKO (32)
- MANYO TOOLS (23)
- ESCO (17)
- TRUSCO NAKAYAMA (16)
- TAKURA KOGU (11)
- SUMITOMO_ELEC_ (10)
- NIKKENKOSAKU (6)
- SHOWA TOOL (5)
- THE_CUT (5)
- TSCHORN (3)
- NEW STRONG (2)
- GIGA SELECTION (1)
- NT TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Tooling-Related Equipment
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy