(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
WIHA Pliers/Nippers/Pincers
| Days to Ship |
|
|---|
-
Snap Ring Pliers for Holes (tip 90°)
WIHA
Snap ring pliers for holes with 90° angle in accordance with DIN ISO 5256.
[Features]
· The tip has been forged precisely into a cylindrical shape.
· It is made from chrome vanadium tool steel.
· A tool to insert snap rings inside of holes and to take them outStandard Price: MYR 196.90 Days to Ship: 9 Day(s) -
WIHA
The blade near the joint is for cutting hard wires. The cutting edge part is used for flush cutting of soft wire, cable, plastic, etc. without generating any burrs.
[Features]
· Innovative head with two types of cutting functions.
· Blades are beveled near the joint section, whereas the section near the tip is flush.
· The plier arms move in parallel for a 25% improvement in grip strength.
· A 23° tilt was added to the arm for use without fatigue.
· Opening spring and arm lock configuration included.
· The plier head uses bearing steel, hardened to about HRC 60.
· Grip is made of durable glass fiber reinforced plastic, with a soft grip area that is gentle on the hands.Standard Price: MYR 398.40 Days to Ship: 10 Day(s) -
Needle Nose Pliers, with Cutting Edge (Radio Pliers, Classic)
WIHA
Needle nose pliers with cutting edge in accordance with DIN ISO 5745.
[Features]
· A straight type with serrated knob part.
· The wire cutting blades are induction hardened to approximately HRC 60.
· The material is special tool steel.
· Intended for use by mechanics and electriciansStandard Price: MYR 212.43 Days to Ship: 11 Day(s) -
High Strength Type Combination Pliers (High Strength Electrical Pliers/Classic)
WIHA
Heavy duty type combination pliers in accordance with DIN ISO 5746.
[Features]
· Cuts wires using only 60% of the force of standard combination pliers.
· The blade is induction hardened to roughly HRC 64, so it can be used for cutting piano wire.
· The material is C60 special tool steel.
· With serrated jawStandard Price: MYR 277.16 Days to Ship: 11 Day(s) -
Bent Needle Nose Pliers with Cutters
WIHA
Bent tip needle nose pliers with cutting edge in accordance with DIN ISO 5745.
[Features]
· The angle of the bend in the tip is approximately 40°, and the claw part is serrated.
· The wire cutting blades are induction hardened to approximately HRC 60.
· The material is special tool steel.
· Intended for use by mechanics and electriciansStandard Price: MYR 245.16 Days to Ship: 11 Day(s) -
Magic Tip Snap Ring Pliers for Hole
WIHA
[Features]
· Magic tip snap ring pliers for holes in accordance with DIN ISO 5256.
· Head shape: Straight design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Magic Tip, subjected to special surface processing resistant to rust, prevents the snap ring from flying off.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Material: Chrome Vanadium Tool Steel, TemperingStandard Price: MYR 205.78- Days to Ship: 5 Day(s) or more -
Magic Tip Snap Ring Pliers for Hole (90° Tip)
WIHA
[Features]
· Magic tip snap ring pliers for holes in accordance with DIN ISO 5256.
· Head shape: Tip angle of 90°.
· Design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Magic Tip, subjected to special surface processing resistant to rust, prevents the snap ring from flying off.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Material: Chrome vanadium tool steel, tempering.
· Application: Used when inserting or removing the snap ring into/from a bore hole.Standard Price: MYR 234.36- Days to Ship: 5 Day(s) or more -
Magic Tip Snap Ring Pliers for Shaft
WIHA
[Features]
· Magic tip snap ring pliers for shafts in accordance with DIN ISO 5254.
· Head shape: Straight design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Magic Tip, subjected to special surface processing resistant to rust, prevents the snap ring from flying off.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Material: Chrome Vanadium Tool Steel, TemperingStandard Price: MYR 299.00- Days to Ship: 8 Day(s) or more -
Magic Tip Snap Ring Pliers for Shaft (90° Tip)
WIHA
[Features]
· Magic tip snap ring pliers for shafts in accordance with DIN ISO 5254.
· Head shape: Tip angle of 90°.
· Design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Magic Tip, subjected to special surface processing resistant to rust, prevents the snap ring from flying off.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Material: Chrome vanadium tool steel, tempering.
· Application: Used when installing or removing the snap ring on/from the shaft and axle.Standard Price: MYR 272.04- Days to Ship: 8 Day(s) -
Magic Tip Snap Ring Pliers Set, 4 pcs
WIHA
[Features]
· Magic tip snap ring pliers 4-piece set.
· Design: Includes a high-elasticity, high-accuracy magic tip which uses the highest grade ball bearing steel.
· Heat-treated for excellent durability and the tip is slim for outstanding operability.
· Application: A set of 2 pieces each of snap ring pliers for holes and shafts.
· Used with insertion/removal of snap rings for bore hole and axle.
· Weight: 650 gStandard Price: MYR 1,041.05 Days to Ship: 14 Day(s) or more -
WIHA
[Features]
· A 4-piece set of conventional-type snap ring pliers that have already permeated the market.
· Design: Basic snap ring pliers which satisfy the acceptable basic performance in the marketplace.
· The tip is precision machined to enable work at high speed.
· Maintains accuracy, even during tightening, and does not bend.
· Application: Used with snap rings for bore hole insertion/removal and axle installation/removal.
· Weight: 680 g.
· A set of 2 pieces each of snap ring pliers for holes and shafts.Standard Price: MYR 838.80 Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA |
| Product Series | Needle Nose Pliers, with Cutting Edge (Radio Pliers, Classic) | High Strength Type Combination Pliers (High Strength Electrical Pliers/Classic) | |||||||||
| Days to Ship | 9 Day(s) | 10 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 14 Day(s) or more | 8 Day(s) or more |
| Product Category | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | Retaining Ring Pliers | - | - | - | Pliers | Retaining Ring Pliers | Retaining Ring Pliers | Retaining Ring Pliers | Retaining Ring Pliers | Retaining Ring Pliers | Retaining Ring Pliers |
| Plier Type | - | - | Longnose pliers | Pliers | - | - | - | - | - | - | - |
| Nipper Type | - | Nippers | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 180 | - | 160 | 225 | 160 | 140 ～ 305 | 140 | 240 ～ 300 | 140 | - | - |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | - | - | - | - | - | - | - | - | - | - | - |
| Steel Wire Cutting Performance(φ/mm) | - | - | 2.5 | 4.2 | 2.5 | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | 2.5 | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | NA | - | - | - | - | NA | NA | NA | NA | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | 19-60 | - | - | - | - | 8-13 ～ 85-140 | 8-13 ～ 12-25 | 40-100 ～ 85-140 | 3-8 ～ 10-25 | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
-
Plier Type
-
Plier Type
- Pliers
- Lead Pliers
- Longnose pliers
-
Nipper Type
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
-
With or without Spring
- Available
- NA
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 8.0
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Blade Tip
- Spring
- Snap ring plier tip claw
Narrow search by specifying Manufacturer
-
- KNIPEX (198)
- MUROMOTO TEKKO (92)
- FUJIYA (63)
- ESCO (56)
- HOZAN (42)
- TOP (40)
- TRUSCO NAKAYAMA (39)
- ENGINEER (37)
- KTC(KYOTO TOOL) (34)
- TSUNODA (33)
- 3PEAKS (29)
- KEIBA (26)
- TONE (21)
- LOBTEX (18)
- MITOLOY (14)
- WIHA (11)
- HANAZONO TOOL (10)
- SMATO (9)
- SUPER TOOL (8)
- GRIPONTOOLS (7)
- LINDSTROM (7)
- IGARASHIPLIERS (6)
- SIGNET (5)
- E VALUE (4)
- ARC (3)
- HAZET (3)
- TRAD (3)
- AS ONE (2)
- GOOT (2)
- Ｍ＆Ｍ (2)
- NEPROS (2)
- ARC GREATTOOL (1)
- ANEX (1)
- H & H (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy