(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Pliers/Nippers/Pincers
| Days to Ship |
|
|---|
-
HOZAN
High-grade longnose pliers with a fine tip and polished finish.
[Features]
· The tip is more tapered than P-15 and has been polished for high-quality finish.
· With anti-slip knurling.
[Applications]
· Ideal for various types of manual work.Standard Price: MYR 133.55 Days to Ship: 1 Day(s) -
(Merry) Heat Nippers (with Spring)
MUROMOTO TEKKO
[Features]
·Since the blade edge is heated by a heater, it will not crack or break even when cutting fragile resin, and it can also cut other resins with a light force.
[Applications]
·For cutting fragile resin such as acrylic, styrene, glass-filled resin, etc.Standard Price: MYR 684.53- Days to Ship: 9 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· Suitable for cutting wire.
· It can also cut protruding nails.
[Applications]
· General purpose toolStandard Price: MYR 180.91 Days to Ship: 9 Day(s) -
HOZAN
Highly durable precision nipper equipped with a lead stopper.
[Features]
· Semi-flush cut type.
· Cutting ability Copper wire: 0.18 to 0.8 mm in diameter (effective lead stopper range).
· Hardness HRC: main body/46.
· Blade: 60.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 × 1012 Ω.
[Applications]
· Ideal for cutting the leads of resistors, capacitors, etc.Standard Price: MYR 18.69- Days to Ship: 9 Day(s) or more -
ENGINEER
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Crimp height can be adjusted. Provides excellent visibility during crimping.
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 1.25 mm to 1.5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer with excellent oil resistance for the grip.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
· The set pin lets you easily adjust for looseness that occurs over long periods of use.
[Applications]
· Crimping work for ultra-small contact pin.Standard Price: MYR 238.06 Days to Ship: 1 Day(s) -
Universal Long-Nose Pliers 320S-150
FUJIYA
[Features]
· 6 different functions in this 1 piece.
· Can split lines: Possible to interrupt cords.
· With vinyl wire peeling function: φ 1.25 mm vinyl wires.
· With convenient crimp function: Crimp terminal connection range 1.25 mm²Standard Price: MYR 158.00 Days to Ship: 9 Day(s) -
TONE
Pliers effective for a wide range of fields.
[Features]
· A universal tool with all kinds of functions including monkey wrench, pliers, and vises.
· Holding tool suitable for tacking, fixing, welding and bonding.
· Can be used for a wide range of applications such as gripping, bending, twisting and cutting.
· Perfect for clamping pipes and round objects.
· Can be used as a wire cutter.
[Applications]
· For plate metal, welding work, factory preservation, woodwork, metal processing, machine work, etc.Standard Price: MYR 217.79 Days to Ship: 9 Day(s) -
Tapered Long Nose Pliers (with Spring)
TOP
[Features]
· Fine long tip shape is 5 mm longer than conventional longnose pliers.
· The entire body is slim, making it 30 g lighter than conventional longnose pliers.
· The induction hardening provides high sharpness over a long period of time.
· Special tool steel is used to provide outstanding durability and corrosion resistance.
· A vinyl grip is included which is gentle on the hands.
· Includes a spring so continuous work is not tiring.
· The spring is replaceable.Standard Price: MYR 178.46 Days to Ship: 9 Day(s) -
ENGINEER
Nippers ideal for base periphery work on precision equipment, etc.
[Features]
· For dedicated use with copper wire and other soft wire materials.
· Uses environmentally friendly elastomer resin and gently fits to hands.
· It has support for ESD anti-static countermeasures, with a surface resistance value of 1 x 10⁶ to 10⁷ Ω/sq. that allows secure work on circuit boards.
[Applications]
· For base periphery work on precision equipment, etc.Standard Price: MYR 115.04 Days to Ship: 9 Day(s) -
MUROMOTO TEKKO
[Features]
·Since the fulcrum is shorter than the tip of ordinary pliers, it has excellent cutting ability. (Employs eccentric lever principle)
·Appropriate non-slip is applied to the grip part.
·It is knurled so that nuts can be turned.
[Applications]
·Electrical work.Standard Price: MYR 192.30- Days to Ship: 8 Day(s) or more -
Grip pliers TGP-125 to TGP-250
TRUSCO NAKAYAMA
[Features]
· Suitable for various work that uses a manual vise such as positioning.
[Applications]
· For plate metal, welding work.Standard Price: MYR 42.54- Days to Ship: 5 Day(s) or more -
Picky (Stainless Steel Mini Long Nose Pliers) 115 mm
TOP
[Features]
· Made of stainless steel, it is rust resistant and has excellent wear resistance.
· Looseness can be finely adjusted with a flathead screwdriver.
· Includes a cutter function in addition to a grasping tip.
· Includes a spring so continuous work is not tiring.
· The spring is replaceable.
· A molded grip that's easy to grip and suitable for continuous work.Standard Price: MYR 189.35 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Unlike traditional pliers, it has a shape and teeth that grip small screws at the tip.
· When using the tip part and turning the small screw, it is unlikely to slip, so it can be turned with torque strength more than 4 times that of conventional pliers (compared with our products).
· It is possible to use it in the vertical direction which was difficult with ordinary pliers.
· Very convenient for removal of stripped or rusted small screws, or small screws that have a special shape.
[Applications]
· Loosening small screwsStandard Price: MYR 125.66 Days to Ship: 9 Day(s) -
ENGINEER
Pliers capable of crimping 100 or more kinds of terminals into the desired shape.
[Features]
· Inexpensive and light-weight.
· Crimp height can be adjusted when crimping. Provides excellent visibility during crimping to reduce errors.
· Compatible with a wide variety of terminals since core barrels and coated wire barrels are crimped separately.
· It adopts a new die shape and also supports the long terminal of a spring (barrel).
· The die is precision finished. The grip boasts excellent oil resistance, and uses environmentally-friendly elastomer.
[Applications]
· 4 dies enable AWG26 to 18 compliant terminals to be crimped.
· Optimal for ultra-small connector crimping.Standard Price: MYR 277.97 Days to Ship: 2 Day(s) -
SIGNET
These are snap ring pliers which support both shaft and hole use.
Standard Price: MYR 105.15 Days to Ship: 2 Day(s) -
3PEAKS
[Features]
· Ideal for cutting plastic gates in narrow and deep areas.
· The blade can be inserted directly from above.
· Reverse grasp possible.Standard Price: MYR 170.95- Days to Ship: 9 Day(s) -
Plastic nipper PNP190GS/PNP-125G-S/PNP-150G-S
3PEAKS
[Features]
· The flat blade maintains superior sharpness.
· Equipped with a stopper for preventing misalignment of the blades.
[Applications]
· For plastic molding work.Standard Price: MYR 153.75- Days to Ship: 8 Day(s) or more -
3PEAKS
[Features]
· A small top cutter.
· The blade can be inserted directly from above.
· Reverse grasp possible.Standard Price: MYR 171.25 Days to Ship: 9 Day(s) or more -
ENGINEER
Tip cutter for precision work.
[Features]
· Uses environmentally friendly elastomer resin and gently fits to hands.
· The grip part supports ESD anti-static countermeasures, with a surface resistance value of 1 x 10⁶ to 10⁷ Ω/sq. that allows secure work on circuit boards.
· The cutting edge has an angle of 45°.
[Applications]
· It is ideal for cutting fine wire using a precision vertical operation.Standard Price: MYR 173.59 Days to Ship: 9 Day(s) -
Standard Price: MYR 203.91- Days to Ship: 8 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Ideal for positioning of welding through the frame. Thickness of teeth is 15 mm.
[Applications]
· For plate metal, welding work.Standard Price: MYR 186.82 Days to Ship: 9 Day(s) -
Parts Handle Spring Set Replacement for use with Snap Ring Pliers 【1-5 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· Claw for TSRP1050.Standard Price: MYR 14.33- Days to Ship: 5 Day(s) or more -
Snap Ring Pliers (for use with Holes) Long Type
TRUSCO NAKAYAMA
[Features]
· Handle shape is long type.Standard Price: MYR 123.91- Days to Ship: 6 Day(s) or more -
FUJIYA
[Features]
· Prevents scattering by grasping the cutting edge securely with two plates.
· Prevents scattering of binding bands. : 2 plates are sandwiched together to securely catch the cut end. Prevents the loss of a sharp edge and can improve work performance.
· Ideal for cutting binding bands and preventing scattering: Since it uses a sharp blade for plastics, it can cut lightly and provide a clean cut surface, preventing injury.
· Principle of scatter prevention: The surfaces of the two plates clamp together to powerfully grip scraps.
· Cross section can be cleanly cut: Plastic blade enables light, quick cutting and face cutting.Standard Price: MYR 171.13 Days to Ship: 9 Day(s) -
Needle-Nose Pliers with Spring
FUJIYA
Ideal for assembly, repair, and disassembly of electronic equipment, precision instruments, etc. Uses a spring to make opening and closing easy, making continuous work less fatiguing and more comfortable
[Features]
· Serrations are provided on holding portion to prevent slipping.Standard Price: MYR 153.75 Days to Ship: 9 Day(s) -
Curved Long Snap Ring Pliers (for Holes)
KTC(KYOTO TOOL)
[Features]
· Caulked part of the main body has less wobble and opens and closes with a spring.
· Long 60 mm claw, useful for narrow and deep locations.
[Applications]
· Bent Tip Snap Ring Pliers for HolesStandard Price: MYR 188.30 Days to Ship: 7 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· A magnifying device is used for easy cutting.
· Soft grip that reduces the load on the hand.
· Grip end includes a ball chain to prevent opening.
[Applications]
· General purpose toolStandard Price: MYR 227.87 Days to Ship: 8 Day(s) -
KNIPEX
· Ideal for attaching/removing click types and Cobra types that are popular among European cars
· Can also be used for hose removal because it as an etched jaw.
· The top part is replaceable and has a long lifespan.
[Notes]
Replacement tip: model no. 8559-250CStandard Price: MYR 655.72 Days to Ship: 9 Day(s) -
HOZAN
Small nippers suitable for precision work.
[Features]
· Compact size of 130 mm total length that fits in the palm. It provides excellent maneuverability and ease of use.
· Small body convenient for cutting binding bands in a limited space.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· The cut end of the binding band is less likely to jump out, thus preventing hand injuries.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
[Applications]
· Ideal for cutting soft wires such as copper.Standard Price: MYR 128.25 Days to Ship: 1 Day(s) -
HOZAN
Lead pliers that firmly hold the target object.
[Features]
· The tip is wide and slim for excellent stability.
· Not knurled.
[Applications]
· Ideal for various types of manual work.Standard Price: MYR 120.44 Days to Ship: 9 Day(s) -
ENGINEER
With a small head, these nippers are used for working in the periphery of circuit boards.
[Features]
· The cutting edge provides a sharp, full flush cut.
· The blade part has high durability thanks to thorough hardening which achieves sharp cutting ability.
· Brackets are included so that it is possible to adjust the width of the blade part opening (with a coil spring function to prevent dropping out).
· Uses environmentally friendly elastomer for the grip part that tightly fits to hands.
· The grip part has a surface resistance value of approximately 1 x 10^6 to 1 x 10^7 Ω/sq (not an insulated tool).
[Applications]
· For work on substrates.Standard Price: MYR 115.11 Days to Ship: 9 Day(s) -
(Merry Mark) JIS Combination Pliers Knurling
MUROMOTO TEKKO
[Features]
·Appropriate non-slip is applied to the grip part.
·It is knurled so that nuts can be turned.Standard Price: MYR 149.40- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Small head ideal for narrow spaces.
· Since the release lever is on the upper surface of the handle, it is easy to use without rebound.
· Ideal for holding 2 flat panels of the same thickness.
[Applications]
· Plate welding positioning, bending, crimping, corrections, and other plate metal work.Standard Price: MYR 165.11 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Very small head ideal for narrower spaces.
· Since the release lever is on the upper surface of the handle, it is easy to use without rebound.
· Optimal for stacking and holding flat and curved panels.
[Applications]
· Plate welding positioning, bending, crimping, corrections, and other plate metal work.Standard Price: MYR 163.76 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· JIS Class H has superior cutting force.
[Applications]
· Nippers for cutting electric wires during electrical construction, light electrical work, etc.Standard Price: MYR 105.04 Days to Ship: 9 Day(s) -
Snap Ring Pliers (for use with Shafts) - S50C
TRUSCO NAKAYAMA
[Features]
· With a handle shape for easier gripping.Standard Price: MYR 121.65- Days to Ship: 6 Day(s) or more -
Snap Ring Pliers Shaft-Use (Straight)
FUJIYA
[Features]
· Replaceable claw type tool dedicated for attaching/detaching C rings, extremely user friendly. Body and claw can be replaced by operating a single screw, enabling two types (bent and straight) to be used with one tool.
· With reverse taper machined on blade tip, the design helps prevent the ring from slipping offStandard Price: MYR 141.47 Days to Ship: 8 Day(s) -
TOP
[Features]
· Arc-shaped teeth securely hold pipes, etc.
· Handle grip has a spring for easy operation.
· The opening can be adjusted in 5 steps for DP-165 and 7 steps for DP-250.
· Handle has a grip, making it easy to hold.Standard Price: MYR 149.23- Days to Ship: 8 Day(s) -
Snap Ring Pliers, for Shafts (Standard Jaw Type)
SUPER TOOL
[Features]
· The claw part is made of structural alloy steel treated with manganese phosphate film for excellent durability.
· The grip is made of stainless steel with a lightweight and easy-to-grip designStandard Price: MYR 131.94- Days to Ship: 8 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· Multi-functional type in which the tip is suitable for cutting soft wires such as copper wires and other fine wires, while the points nearby the joint is suitable for cutting stiff wires such as piano wires.
[Applications]
· General purpose toolStandard Price: MYR 160.16- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Suitable for cutting printed circuit board lead wire.
· With a blade latch stopper, it is easy to switch hands.
· With a cutting chip scatter-resistant function, the chips will not disperse when cutting.
[Applications]
· General purpose toolStandard Price: MYR 139.68 Days to Ship: 9 Day(s) -
Curved Long Snap Ring Pliers (for Shafts)
KTC(KYOTO TOOL)
[Features]
· Caulked part of the main body has less wobble and opens and closes with a spring.
[Applications]
· Bent Tip Snap Ring Pliers for ShaftsStandard Price: MYR 188.30 Days to Ship: 11 Day(s) or more -
KTC(KYOTO TOOL)
[Features]
· With a blade that cuts copper or steel wire, and a function that grips and bends wires, thin sheets and small parts.
· This is a popular tool for wirework and sheet metal working.
· The handle component is vinyl coated.
[Applications]
· General purpose toolStandard Price: MYR 161.25- Days to Ship: 9 Day(s) -
Standard Price: MYR 47.62 Days to Ship: 4 Day(s) or more -
Snap Ring Pliers for Holes (tip 90°)
WIHA
Snap ring pliers for holes with 90° angle in accordance with DIN ISO 5256.
[Features]
· The tip has been forged precisely into a cylindrical shape.
· It is made from chrome vanadium tool steel.
· A tool to insert snap rings inside of holes and to take them outStandard Price: MYR 196.90 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOZAN | MUROMOTO TEKKO | KTC(KYOTO TOOL) | HOZAN | ENGINEER | FUJIYA | TONE | TOP | ENGINEER | MUROMOTO TEKKO | TRUSCO NAKAYAMA | TOP | KTC(KYOTO TOOL) | ENGINEER | SIGNET | 3PEAKS | 3PEAKS | 3PEAKS | ENGINEER | MUROMOTO TEKKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | FUJIYA | FUJIYA | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KNIPEX | HOZAN | HOZAN | ENGINEER | MUROMOTO TEKKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | FUJIYA | TOP | SUPER TOOL | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | E VALUE | WIHA |
| Product Series | Parts Handle Spring Set Replacement for use with Snap Ring Pliers 【1-5 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 1 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 2 Day(s) | 2 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 7 Day(s) or more | 8 Day(s) | 9 Day(s) | 1 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 11 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 9 Day(s) |
| Product Category | Pliers | Nippers | Nippers | Nippers / Parts | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Nippers | Nippers | Nippers | Nippers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Nippers | Pliers | Nippers | Pliers | Pliers | Pliers | Nippers | Pliers | Pliers | Pliers | Pliers | Nippers | Nippers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | - | - | - | - | - | - | Pliers | - | - | - | Pliers | - | Pliers | - | Retaining Ring Pliers | - | - | - | - | - | Pliers | Retaining Ring Pliers | Retaining Ring Pliers | - | - | Retaining Ring Pliers | - | Pliers | - | - | - | - | Pliers | Pliers | - | Retaining Ring Pliers | Retaining Ring Pliers | Pliers | Retaining Ring Pliers | - | - | Retaining Ring Pliers | - | Pliers | Retaining Ring Pliers |
| Plier Type | Longnose pliers | - | - | - | Pliers | Longnose pliers | - | Longnose pliers | - | Pliers | - | Longnose pliers | - | Pliers | - | - | - | - | - | Pliers | - | - | - | - | Longnose pliers | - | Pliers | - | - | Lead Pliers | - | Pliers | - | - | - | - | - | - | - | - | - | - | Pliers | - | - |
| Nipper Type | - | Heat Nippers | Nippers | Nippers | - | - | - | - | Nippers | - | - | - | - | - | - | Nippers | Nippers | Nippers | Nippers | - | - | - | - | Nippers | - | - | - | - | Nippers | - | Nippers | - | - | - | Nippers | - | - | - | - | Nippers | Nippers | - | - | - | - |
| Overall Length(mm) | 163 | 150 ～ 190 | 160 | 105 | 175 | 160 | 227 | 164 | 112 | 185 ～ 225 | 140 ～ 225 | 130 | 175 | 175 | 150 | 140 ～ 150 | 132 ～ 197 | 117 | 123 | 185 ～ 225 | 275 | - | 130 ～ 300 | 131 | 160 | 175 | 178 | 250 | 128.5 | 159 | 120 | 150 ～ 200 | 215 | 210 | 156 | 155 ～ 205 | 183 | 173 ～ 253 | 130 ～ 200 | 134 ～ 204 | 130 | 170 | 165 ～ 215 | - | 180 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Use with both shaft and hole | - | - | - | - | - | - | - | For Hole | - | - | For Hole | - | - | - | - | - | - | - | - | - | For Shaft | For Shaft | - | For Shaft | - | - | For Shaft | - | - | - |
| With or without Spring | NA | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA | Available | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | Available | Available | Available | Available | - | Available | NA | Available | NA | NA | NA | NA | Available | Available | Available | Available | NA | NA | Available | NA | - | - |
| Steel Wire Cutting Performance(φ/mm) | - | - | 2 | - | - | 1.5 | 2 | 1.5 | - | 3.2 ～ 3.6 | - | - | - | - | - | - | - | - | - | 3.2 ～ 3.6 | - | - | - | - | 1.5 | - | - | - | - | - | - | 2 ～ 3.2 | - | - | 2 | - | - | - | - | - | - | - | 2.15 ～ 3.4 | - | - |
| Copper Wire Cutting Performance(φ/mm) | 2.6 | - | 2.6 | 0.18～0.8 | - | 2.6 | - | - | 0.8 | 4 ～ 4.5 | - | 0.18-1.6 | - | - | - | - | - | - | 0.6 | 4 ～ 4.5 | - | - | - | - | 2.6 | - | - | - | 2 | - | 1.2 | 3 ～ 4 | - | - | 3 | - | - | - | - | 2.3 ～ 2.9 | 0.9 | - | - | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.6 ～ 2.3 | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 4 | 5 ～ 8 | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | 2.0X3 core ～ 2.6X3 core | - | - | - | - | - | - | - | - | - | 2.0X3 core ～ 2.6X3 core | - | - | - | - | - | - | - | - | - | - | - | 1.6X3 core ～ 2.0X3 core | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | NA | - | - | NA | - | - | - | - | - | - | - | - | - | NA | Available | - | - | - | - | NA | - | - | NA |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 | - | 0.9 ～ 2.5 | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10-25 ～ 82-180 | - | - | - | - | - | - | - | - | - | - | - | - | 3-10 ～ 40-65 | 10-40 | - | 4-10 ～ 32-80 | - | - | - | - | - | 19-60 |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
-
Plier Type
-
Plier Type
-
Nipper Type
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
-
With or without Spring
-
Steel Wire Cutting Performance(φ/mm)
- 0.18-1.9
- 0.18-1.6
- 0.2 to 0.9
- 0.3-2.6
- 0.5
- 0.6
- 0.8
- 0.8 (Soft Iron Wire)
- 0.8×1.2
- Tip blade: 0.8 or less, Side blade: 1.2 or less
- 0.9
- 1
- 1.2
- 1.2 (Soft Iron Wire)
- 1.4
- 1.5
- 1.6
- 1.6 (soft iron wire)
- 1.8
- 1.9
- 2
- 2.15
- 2.2
- 2.3 (soft iron wire)
- 2.4
- 2.5
- 2.6
- 2.75
- 2.8
- 3
- 3.2
- 3.4
- 3.5
- 3.6
- 4
- 4.2
- 4.8
- 5
- 5.5
- -
- Cannot cut
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 8.0
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
- 1
- 1.5
- 2
- 3
- 4
- 5
- 5.0(ABS resin)
- 6
- 6.0(ABS resin)
- 8
- 9
- 10
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
-
Tip claw diameter(mm)
- 0.5–0.7
- 0.8
- 0.9
- 1.25
- 1.3
- Tip diameter (ømm): 1.3
- 1.4
- 1.7
- 1.8
- Tip diameter (ømm): 1.8
- 2
- 2.0～2.4
- 2.25
- 2.3
- 2.5
- 3.2
- 3.4
- 3.5
- 4.4
- 4.5
- 16.5
-
Compatible Ring Size(mm)
-
Parts Type
Narrow search by specifying Manufacturer
-
- KNIPEX (198)
- MUROMOTO TEKKO (92)
- FUJIYA (63)
- ESCO (56)
- HOZAN (42)
- TOP (40)
- TRUSCO NAKAYAMA (39)
- ENGINEER (37)
- KTC(KYOTO TOOL) (34)
- TSUNODA (33)
- 3PEAKS (29)
- KEIBA (26)
- TONE (21)
- LOBTEX (18)
- MITOLOY (14)
- WIHA (11)
- HANAZONO TOOL (10)
- SMATO (9)
- SUPER TOOL (8)
- GRIPONTOOLS (7)
- LINDSTROM (7)
- IGARASHIPLIERS (6)
- SIGNET (5)
- E VALUE (4)
- ARC (3)
- HAZET (3)
- TRAD (3)
- AS ONE (2)
- GOOT (2)
- Ｍ＆Ｍ (2)
- NEPROS (2)
- ARC GREATTOOL (1)
- ANEX (1)
- H & H (1)
CAD
-
- 2D
- 3D
Related Categories to Pliers/Nippers/Pincers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy