(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KYOCERA Grooving / Cutting Off Holders（Page2）
| Days to Ship |
|
|---|
-
Lathe Turning/Cutting (Multi-Function) Bit GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 50.55- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 37.69- Days to Ship: 10 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 618.26- Days to Ship: 9 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 642.26- Days to Ship: 6 Day(s) or more -
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For outer diameter grooving and face grooving.Standard Price: MYR 878.31 Days to Ship: 10 Day(s) -
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For outer diameter relief cut grooving.Standard Price: MYR 878.31 Days to Ship: 10 Day(s) -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.
A right angle type.Standard Price: MYR 858.12- Days to Ship: 10 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.Standard Price: MYR 747.30- Days to Ship: 10 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip
KYOCERA
[Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.
Standard Price: MYR 68.10- Days to Ship: 6 Day(s) or more -
Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 827.39- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 350.77- Days to Ship: 6 Day(s) or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.
Standard Price: MYR 91.40- Days to Ship: 4 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Standard Price: MYR 1,819.98- Days to Ship: 6 Day(s) or more -
KYOCERA
Inner diameter grooving SIGE model for automatic lathes.
Standard Price: MYR 2,674.75 Days to Ship: 10 Day(s) -
Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
KYOCERA
[Specifications]·no cutting direction; lubrication hole (oil hole): yes; compatible sleeve: It can be used in combination with a holder to change the tool runout.
Standard Price: MYR 713.22- Days to Ship: 6 Day(s) or more -
Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)
KYOCERA
GIV model tip for small diameter grroving.
Standard Price: MYR 72.19- Days to Ship: 4 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,094.05- Days to Ship: 10 Day(s) -
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type
KYOCERA
[Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,538.40- Days to Ship: 6 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type
KYOCERA
[Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: GIA insert
Standard Price: MYR 341.53- Days to Ship: 6 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip
KYOCERA
Clamp-on type large inner diameter deep grooving holder.
Standard Price: MYR 68.10- Days to Ship: 6 Day(s) or more -
Small Bore End Surface Slotting, EZ Bar Conforming Tip
KYOCERA
T dimension: Shows the machinable groove depth.
Standard Price: MYR 202.06- Days to Ship: 6 Day(s) or more -
Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar)
KYOCERA
The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.
Standard Price: MYR 251.09- Days to Ship: 6 Day(s) or more -
Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)
KYOCERA
T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 459.48- Days to Ship: 10 Day(s) -
Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)
KYOCERA
· T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 1,011.73- Days to Ship: 6 Day(s) or more -
KGDF Type End Face Grooving GDFM/GDFMS Types
KYOCERA
Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.
Standard Price: MYR 44.91- Days to Ship: 6 Day(s) or more -
Grooved End Face Holder (Split Type) KGDF Type
KYOCERA
T dimension: Shows the machinable groove depth. (When T dimension is 20 mm or more, the maximum groove depth of the 2-corner specification tip is 18 mm.)
Standard Price: MYR 1,240.25 Days to Ship: 10 Day(s) -
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)
Standard Price: MYR 1,227.13- Days to Ship: 10 Day(s) -
Standard Price: MYR 90.90- Days to Ship: 4 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Standard Price: MYR 1,081.95- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)
Standard Price: MYR 1,160.95- Days to Ship: 10 Day(s) or more -
Multi-Functional / End Face Grooving Holder Compatible Tip
KYOCERA
Takinor multi-functional / end face grooving holder.
Standard Price: MYR 58.20- Days to Ship: 6 Day(s) or more -
Grooved End Face Blade KFTB-S Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,017.48- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 82.62- Days to Ship: 6 Day(s) or more -
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,209.24- Days to Ship: 10 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 91.92- Days to Ship: 6 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 53.68- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 796.61- Days to Ship: 10 Day(s) or more -
KYOCERA
A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.
Standard Price: MYR 74.68- Days to Ship: 6 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 50.55- Days to Ship: 6 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 642.26- Days to Ship: 10 Day(s) -
Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)
KYOCERA
KTKTBF type blade holding tool block from Tsukkiru.
[Compatible Blade]KTKB/KFTB32Standard Price: MYR 1,124.50 Days to Ship: 10 Day(s) or more -
Cutter Holder (Integrated Type) KTKH-S Type
KYOCERA
[Specifications]·Machining applications: parting-off; holder angle (°): 0; type: integrated type; compatible insert: TKN, TKN-P, TKR/L, TKR/L-P
Standard Price: MYR 735.06- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 963.46- Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
[Applications]
· Holder for Grooving and Cutting OffStandard Price: MYR 796.61- Days to Ship: 10 Day(s) or more -
Kyocera Mill Routing Tip Holder
KYOCERA
[Features]
· SIGE-WH type.
[Applications]
· Inner Diameter Groove HolderStandard Price: MYR 2,323.47 Days to Ship: 8 Day(s)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Multi-Functional / Grooving Holder KGM Type (For Automatic Board) | Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip | Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining) | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type) | Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type | Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type | Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type | Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip | Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar) | Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit) | Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit) | Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA | Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type | Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type) | Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type) | ||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 8 Day(s) |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | Cutting off | Inner Diameter Grooving |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 5(6) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Selfishly | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | No-hand | Right-hand | Right-hand | Left-hand | Left-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / No-hand | Right-hand / Left-hand | - | - | - | - | - | - |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ ∞ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_c$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.30 to 3.00
- 0.33～2.8
- 0.5-3.18
- 0.50 to 2.00
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00 to 2.00
- 1.00～2.00
- 1.00 to 2.49
- 1.25～4.80
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.5 to 4.8
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.0–5.0
- 4.00 to 5.90
- 4.6～6.0
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 10～3.0
- 11
- 12
- 15
-
Maximum Groove Depth(mm)
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
-
- KYOCERA (97)
- SANDVIK (53)
- NGK SPARK PLUG (15)
- SUMITOMO_ELEC_ (15)
- ISCAR (1)
- KOSHUHA (1)
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy