(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Multi-Functional / End Face Grooving Holder Compatible Tip
Takinor multi-functional / end face grooving holder.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | rε (mm) | Material | W (mm) | M (mm) | Applicable Holders |
|---|---|---|---|---|---|---|---|---|---|
MYR 81.36 | 10 Piece(s) | 10 Day(s) | 0.3 | CR9025 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 68.71 | 10 Piece(s) | 10 Day(s) | 0.3 | KW10 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 90.48 | 10 Piece(s) | 6 Day(s) or more | 0.3 | PR905 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 90.48 | 10 Piece(s) | 6 Day(s) or more | 0.3 | PR915 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 90.48 | 10 Piece(s) | 10 Day(s) | 0.3 | PR930 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 58.20 | 10 Piece(s) | 10 Day(s) | 0.3 | TN90 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 86.61 | 10 Piece(s) | 10 Day(s) | 0.4 | CR9025 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 87.86 | 10 Piece(s) | 10 Day(s) | 0.4 | KW10 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 95.29 | 10 Piece(s) | 6 Day(s) or more | 0.4 | PR905 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 95.29 | 10 Piece(s) | 10 Day(s) | 0.4 | PR930 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 62.56 | 10 Piece(s) | 10 Day(s) | 0.4 | TN90 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 88.41 | 10 Piece(s) | 10 Day(s) | 0.4 | CR9025 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 80.43 | 10 Piece(s) | 10 Day(s) | 0.4 | KW10 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 102.38 | 10 Piece(s) | 6 Day(s) or more | 0.4 | PR905 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 88.41 | 10 Piece(s) | 10 Day(s) | 0.4 | PR915 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 102.38 | 10 Piece(s) | 10 Day(s) | 0.4 | PR930 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 67.06 | 10 Piece(s) | 10 Day(s) | 0.4 | TN90 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 93.30 | 10 Piece(s) | 10 Day(s) | 0.4 | CR9025 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 84.03 | 10 Piece(s) | 10 Day(s) | 0.4 | KW10 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 93.30 | 10 Piece(s) | 10 Day(s) | 0.4 | PR930 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 85.67 | 10 Piece(s) | 6 Day(s) or more | 0.4 | TN90 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 74.69 | 10 Piece(s) | 6 Day(s) or more | 0.25 | KW10 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 83.05 | 10 Piece(s) | 6 Day(s) or more | 0.25 | PR930 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 65.91 | 10 Piece(s) | 6 Day(s) or more | 0.25 | TN90 | 3 | 2.0 | KFMSR/L… 3 | ||
MYR 87.86 | 10 Piece(s) | 6 Day(s) or more | 0.25 | CR9025 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 79.92 | 10 Piece(s) | 6 Day(s) or more | 0.25 | KW10 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 87.86 | 10 Piece(s) | 6 Day(s) or more | 0.25 | PR930 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 70.30 | 10 Piece(s) | 6 Day(s) or more | 0.25 | TN90 | 4 | 2.6 | KFMSR/L… 4 | ||
MYR 92.68 | 10 Piece(s) | 6 Day(s) or more | 0.25 | CR9025 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 84.82 | 10 Piece(s) | 6 Day(s) or more | 0.25 | KW10 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 92.68 | 10 Piece(s) | 6 Day(s) or more | 0.25 | PR930 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 74.69 | 10 Piece(s) | 6 Day(s) or more | 0.25 | TN90 | 5 | 3.4 | KFMSR/L… 5 | ||
MYR 97.48 | 10 Piece(s) | 6 Day(s) or more | 0.25 | CR9025 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 90.48 | 10 Piece(s) | 6 Day(s) or more | 0.25 | KW10 | 6 | 4.0 | KFMSR/L… 5 | ||
MYR 97.48 | 10 Piece(s) | 6 Day(s) or more | 0.25 | PR930 | 6 | 4.0 | KFMSR/L… 5 |
Loading...
Basic Information
| Preferred Hand | No Preferred Hand |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Lathe Turning (Cutter) Bit GDG Model
- Multi-Functional / Grooving (Cutting-Off) Chip GMG Type
- Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type
- Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)
- Tool Block for Holding Blade, KTKTB Type (Split Type)
- Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)
- Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123
- Grooved End Face Holder (for GVF Chip) GFVT Type
Customers Who Viewed This Item Also Viewed
-
Soft Hammer FP (Iron) Hard II Replacement HeadOHINDUSTRIAL
Standard Price : MYR 21.07-
Days to Ship : 8 Day(s) or more
-
60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough"KYOCERA
Standard Price : MYR 29.45-
Days to Ship : 4 Day(s) or more
-
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting"KYOCERA
Standard Price : MYR 21.71-
Days to Ship : 4 Day(s) or more
-
Combination shockless hammer replacement headOHINDUSTRIAL
Standard Price : MYR 55.85-
Days to Ship : 5 Day(s) or more
-
Multi-Functional / Grooving (Cutting-Off) Chip GMM TypeKYOCERA
Standard Price : MYR 70.29-
Days to Ship : 4 Day(s) or more
-
Head Replaceable Hammer (Nylon Head)TRUSCO NAKAYAMA
Standard Price : MYR 65.51
Days to Ship : 9 Day(s)
-
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○HQ/CNGG12○○HQ "for Finishing to Intermediate Cutting"KYOCERA
Standard Price : MYR 34.03-
Days to Ship : 6 Day(s) or more
-
Multi-Functional / End Face Grooving Holder KFMS TypeKYOCERA
Standard Price : MYR 1,081.95-
Days to Ship : 6 Day(s) or more
-
80° Hexagon Type Positive with Hole WBGT "Finishing"KYOCERA
Standard Price : MYR 52.43-
Days to Ship : 6 Day(s) or more
-
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_recommend_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible ChipKYOCERA
Standard Price : MYR 68.10-
Days to Ship : 6 Day(s) or more
-
Do-Grip Tip for Cutting Protrusions and Profiling - No-HandednessISCAR
Standard Price : MYR 74.27-
Days to Ship : 5 Day(s) or more
-
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_recommend_b$)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy