(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KATO MFG Tap Holders
| Days to Ship |
|
|---|
-
KATO MFG
[Features]
· Eliminates concerns about synchronization errors
· Thin pencil type
· Function is limited to tension (shallow screw set prevention)
· In combination with a TCA-S collet, it is the same length as a conventional SA-III type tapper, and so can be replaced without having to change the program.
· Tension prevents chipping, etc. even in difficult-to-machine materialsStandard Price: MYR 1,764.04- Days to Ship: 9 Day(s) or more -
KATO MFG
[Features]
·Wrench dedicated to RF type tapping tool.
·Minimum order quantity: 1 pc.
·Tapping tool used: RF306/RF414,RF414-OHCStandard Price: MYR 322.78- Days to Ship: 9 Day(s) or more -
SA Series HA-M-OHC Type Tapper
KATO MFG
[Features]
· HA-M type that supports center through coolant
· Characteristics and specifications conform to the HA-M type
· The flange through oil hole type (-OHF) is available upon order
· Unlike the spring collet, tap attachment and detachment can be performed in a single action
· Remeasurement of tool length after tap replacement is unnecessary
· The standard specification uses the TC-MO with feed pump pressures up to 2 MPa.
· Use the TC-MO-SB to handle feed pump pressures up to 5 MPa.
· Also Supports Mist SpecificationsStandard Price: MYR 2,404.43 Days to Ship: 7 Day(s) or more -
SA Series BT-SA-III Type Tapper (Bottle Grip Taper Shank)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyStandard Price: MYR 3,580.42- Days to Ship: 7 Day(s) or more -
SA Series MT-SA-III Type Tapper (Morse Taper Shank)
KATO MFG
[Features]
· Best-selling "Kato Tapper"
· Sizing type screw depth built-in limiting device
· Tapper that works with all machinery, workpieces, and cutting conditions
· Ideal for machining valuable workpieces such as prototypes, single articles, molds, etc.
· The specifications, such as the strength of the spring and extension/contraction amount, can be changed to match the usage conditions.
· The expansion device absorbs feed errors to realize high thread accuracyStandard Price: MYR 2,201.83 Days to Ship: 9 Day(s) or more -
SA Series ST-SA-VI Type Tapper (Straight Shank for Milling Chuck)
KATO MFG
[Features]
· Short body type that can be used in various machines
· Expansion Device to Absorb Feed Errors
· Short Type Ideal for Narrow Work SpacesStandard Price: MYR 2,784.23- Days to Ship: 9 Day(s) or more -
SA Series MT-HA Type Tapper (Morse Taper Shank)
KATO MFG
[Features]
· Simple structure and easy operation
· For Tapping Drilling Machine
· For Standing or Radial Drilling Machines
· Ideal for work in tight spaces due to its slender and short bodyStandard Price: MYR 939.02- Days to Ship: 7 Day(s) or more -
KATO MFG
[Features]
· Drills and Taps for Standing and Radial Drilling Machines
· Quick Change set
· The drill and tap can be replaced in a single touch on the same coreStandard Price: MYR 10,527.81- Days to Ship: 9 Day(s) or more -
Special-Purpose Taper Collet for Drill Tappers
KATO MFG
KATO MFG., taper collet dedicated to drill tapping tool
[Features]
·GMC type
·Minimum order quantity: 1 pc.
·Compatible GM type: GM3 × 3/GM4 × 3/GM4 × 4/GM5 × 4Standard Price: MYR 854.06- Days to Ship: 9 Day(s) or more -
Special-Purpose Magic Chuck for Drill Tappers
KATO MFG
[Features]
An upright, radial ball-only drill / power strip quick-change set.
A GM-type magic chuck.
·Holder length: 84.5 mm / 90.5 mm / 97.5 mm
·Shank: MT3/MT4
·Supported MA type: 3MA412,3MA1022/4MA412,4MA1022,4MA2035Standard Price: MYR 2,303.40- Days to Ship: 9 Day(s) or more -
KATO MFG
[Features]
· Type with built-in automatic safety device
· Appropriate torque is set for each tap size
· The automatic safety device adopts a ball clutch for smoother operation, ensuring both safety and durability.
· The setting torque specification can be selected from 4 different types (standard/yellow/red/roll)
· Pipe threads for the TC2035 or above are side lock types.
· The oversized collet does not feature torque specification settings "Red" or "Roll".
· Use only for light cutting
· The TC-L size (long collet) is also a standard specification.
· Supports Coolant-Thru Specifications
· The grasping force of the carbide tap is reduced, and it can easily fall outStandard Price: MYR 635.34- Days to Ship: 4 Day(s) or more -
KATO MFG
[Features]
· Short body type that can be used in most machines
· Expansion device for absorbing feed errors
· Short type ideal for use in tight work spacesStandard Price: MYR 2,797.58 Days to Ship: 9 Day(s) or more -
KATO MFG
[Features]
· Type with built-in automatic safety device
· Appropriate torque is set for each tap size
· The automatic safety device adopts a ball clutch for smoother operation, ensuring both safety and durability
· Pipe threads for the TC2035 or above are side lock typesStandard Price: MYR 1,180.09 Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Holder Length L(mm) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG | KATO MFG |
| Product Series | SA Series ST-SA-VI Type Tapper (Straight Shank for Milling Chuck) | ||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| Spindle types | BT40 | - | BT50 | BT40 / BT50 | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | Tap | Tap | Tap |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | M3 to M16 | M36 |
| Product Category | Main Body | Attachments/Accessories | Main Body | Main Body | Attachments/Accessories | Main Body | Attachments/Accessories | Main Body | Attachments/Accessories | Attachments/Accessories | Attachments/Accessories | Main Body | Main Body |
| Applicable Manufacturing Machinery (main unit) | Machining Centers | - | Machining Centers | Machining Centers | - | Generic Machine | - | Generic Machine | - | - | - | - | - |
| Holder Length L(mm) | 150 ～ 195 | - | 165 | 150 ～ 195 | 132 | 93 | 93 ～ 176.5 | - | - | 84.5 ～ 97.5 | - | 93 | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spindle types
-
HSK type
-
Tool Type
-
Retainable blade diameter(mm)
-
Product Category
-
Applicable Manufacturing Machinery (main unit)
-
Holder Length L(mm)
-
Coolant System
- Center Through (Blade Through)
Narrow search by specifying Manufacturer
-
- DAISHOWASEIKI (14)
- KATO MFG (13)
- YUKIWA SEIKO (4)
- NIKKENKOSAKU (3)
- MITSUTOMO (1)
CAD
-
- 2D
- 3D
Related Categories to Tap Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy