(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page9）
| Days to Ship |
|
|---|
-
NO. TD-250Y 3-Point Phillips Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-220B 3-Point Hex Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-240G 3-Point Hex Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-53 Precision Hex Driver
VESSEL
Main body stainless steel (end cap part is made of resin). For assembly, repair, and disassembly of precision equipment, hobby items, etc.
Standard Price: MYR 35.12 Days to Ship: 9 Day(s) -
Screwdriver, Famidora 8 No.TD-800
VESSEL
A screwdriver set for home and office.
[Features]
· A set of Phillips and flathead screwdrivers, pin remover, and drill.
· Ergonomic handle that fits the palm of the hand.
· Color-coded colorful screwdriver (replacement shaft).
· A convenient stand for storage.
[Applications]
· For homes and offices.Standard Price: MYR 89.15 Days to Ship: 9 Day(s) -
Standard Price: MYR 39.85 Days to Ship: 9 Day(s) -
Torx Plate Ratchet Screwdriver No.TX-11
VESSEL
Ratchet plate driver with Torx bit.
[Features]
· Set of ratchet handle and Torx bit.
· Tamper-proof (tamper-proof Torx screws) compatible.
· The speed ring allows quick turning.
· Thin type ratchet handle convenient for use in narrow spaces.
· Remove the speed ring for use as a 6.35 mm square drive.
· Ball lock type hexagonal drive with width across flats of 6.35 mm.
[Applications]
· For automobile maintenance as well as various assembling and disassembling work.Standard Price: MYR 72.53 Days to Ship: 1 Day(s) -
Plate Ratchet Screw Catch (Torx) No.TX-12MC
VESSEL
Plate ratchet screwdriver.
[Features]
· Set of ratchet handle, Torx bit, and screw catch.
· Magnetic screw catch that securely holds screws.
· Can also be used with tamper-proof Torx screws.
· The speed ring allows quick turning, and can be removed for use as a 6.35 mm square drive.
· Hexagonal drive with width across flats of 6.35 mm.
[Applications]
· For automobile maintenance as well as various assembling and disassembling work.Standard Price: MYR 106.33 Days to Ship: 9 Day(s) -
Megadora General Screwdriver No.S-900
VESSEL
Megadora with accessory hanger.
[Features]
· Vessel Megadora general screwdriver with hanger.
· Can be selected from normal, stubby, through, ball grip and Crystine (normal, long-shaft, thin-shaft, precision and stubby).Standard Price: MYR 52.09- Days to Ship: 9 Day(s) -
VESSEL
A large diameter cushion grip which effectively transmits force while pushing. Tapered shape which fits into a sack.
Standard Price: MYR 45.76- Days to Ship: 9 Day(s) -
NO. TD-73MC Plate Ratchet Screw Catch
VESSEL
Magnetic screw catch that securely holds screws. A set of hexagonal screw bits and Phillips bits used for furniture assembly and bicycles.
Standard Price: MYR 71.23 Days to Ship: 8 Day(s) -
NO. TD-54 Pin Remover for Watchbands
VESSEL
For adjusting the length of metal watch bands.
[Features]
· Main body stainless steel (end cap part is made of resin).
· For adjusting the length of metal watch bands.Standard Price: MYR 29.50 Days to Ship: 9 Day(s) -
Soft Finish® Torque Screwdriver
WIHA
A Soft Finish® handle Torx Screwdriver. The blade is made of chrome vanadium molybdenum steel. It has been quenched with a chrome plated finish. The tip has undergone Wiha ChromTop processing.
Standard Price: MYR 86.93- Days to Ship: 6 Day(s) or more -
WIHA
The blade is made of chrome vanadium steel. It has been quenched and treated with a black oxide finish. This is a Torx screwdriver with a square, cellulose acetate handle to provide good resistance to shock.
Standard Price: MYR 60.65 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 51.04 Days to Ship: 4 Day(s) or more -
SK 11
Variable type handle enables selection of handle shape to match the specification application.
Standard Price: MYR 135.52 Days to Ship: 6 Day(s) or more -
LED Voltage Detection Driver No.650D
SK 11
LED luminous tube generation enables conduction checks and DC versus AC to be understood at a glance.
Standard Price: MYR 65.83 Days to Ship: 7 Day(s) or more -
LED Voltage Detection Driver No.650 A
SK 11
Polarity identification or operating voltage can be understood at a glance.
Standard Price: MYR 65.83 Days to Ship: 6 Day(s) or more -
SK 11
Automatic screwdriver that can easily attach/remove screws simply by pressing the handle.
[Features]
· Simply pressing the handle down makes it easy to tighten and loosen various screws, drill holes, etc.
· Commercially available 6.35 mm subtense hex bits can be mounted and used for various applications.
[Applications]
· For drilling wood and tightening items such as screws.Standard Price: MYR 79.78 Days to Ship: 6 Day(s) or more -
SK 11
Equipped with the slimmest head in its class, this ratchet screwdriver is ideal for working in narrower places.
[Features]
· The straight type allows smooth working in narrow spaces.
· Ultra-thin 13 mm head (when equipped with 12 mm bit).
[Applications]
· For tightening or loosening screws in narrow spaces.Standard Price: MYR 58.07- Days to Ship: 4 Day(s) or more -
Wooden Handle Penetrating Plus Driver
WIHA
[Features]
· Round blade Phillips screwdriver with a hex bolster to increase tightening torque.
· The blade goes through the wooden portion of the handle.
· Made of chrome vanadium steel.
· It has been quenched with a nickel plated finish.
· Wiha wooden handle screwdriver with a leather cap.Standard Price: MYR 72.55 Days to Ship: 9 Day(s) -
Precision Ball Point Driver (Inch Size)
WIHA
[Features]
· Inch PicoFinish ball point hex screwdriver.
· With rotary cup.
· Maximum Inclination Angle 25°Standard Price: MYR 80.76 Days to Ship: 9 Day(s) -
Precision Ball Point Hex Driver (Pico Finish)
WIHA
[Features]
· PicoFinish ball point screwdriver with soft rubber handle.
· With rotary cup.
· Can be operated with a tilt of up to 25°.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 78.55 Days to Ship: 4 Day(s) or more -
Precision Nut Driver (Inch Size)
WIHA
[Features]
· PicoFinish nut driver with soft rubber handle.
· With rotary cup.
· The blade is made of chrome vanadium molybdenum steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 110.08 Days to Ship: 9 Day(s) -
ESD Torx® Precision Screwdriver
WIHA
[Features]
· This is a precision ESD Torx® screwdriver.
· Handle has an anti-static function.
· Blade: Chrome vanadium steel, fully quenched, chrome plated finish.
· Handle: Precision handle with rotating cap.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: Manufactured in accordance with IEC 61340-5-1.
· Application: Used to assemble electronic parts sensitive to static electricity.Standard Price: MYR 113.07 Days to Ship: 4 Day(s) or more -
Soft Finish® ESD Screwdriver Set (Set of 5)
WIHA
A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.
Standard Price: MYR 419.53 Days to Ship: 4 Day(s) or more -
Soft Finish® ESD Flathead Screwdriver
WIHA
[Features]
· A Soft Finish® ESD anti-static flathead screwdriver.
· Blade: High grade chrome vanadium molybdenum steel, fully quenched, chrome plated finish.
· The tip has undergone Wiha ChromTop processing.
· Handle: WIHA SoftFinish Multi-Component Handle.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: IEC 61340-5-1Standard Price: MYR 156.98 Days to Ship: 6 Day(s) or more -
Soft Finish® Screwdriver Set (Set of 6)
WIHA
[Features]
· 6-piece flathead and Phillips screwdriver set with Wiha SoftFinish handle.
· Round blade is made of high-grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· High-Precision Wiha ChromTop Process for Corrosion-Resistant TipStandard Price: MYR 524.26 Days to Ship: 9 Day(s) -
Phillips Screwdriver with Hexagon Bolster (Soft Finish®)
WIHA
[Features]
· Includes a hexagonal bolster for tightening with stronger torque.
· The blade is made of high grade chrome vanadium molybdenum steel.
· After quenching, it has been given a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 209.17 Days to Ship: 4 Day(s) or more -
WIHA
[Features]
· T-handle type nut driver.
· A long screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with Nickel Plated FinishStandard Price: MYR 171.95- Days to Ship: 4 Day(s) or more -
Nut Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle nut screwdriver.
· A protruding nut screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 110.65- Days to Ship: 9 Day(s) -
Torx Plus® Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle Torx screwdriver.
· The blade is made of chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 72.90 Days to Ship: 4 Day(s) or more -
Set of Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Set of 6 Torx® Screwdrivers with Magic Springs
[Features]
· SoftFinish® Handle Specification Fits Perfectly in the Palm of the HandStandard Price: MYR 563.18 Days to Ship: 6 Day(s) or more -
Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Soft Finish® Handle Torx® Screwdriver with MagicSpring
[Features]
· The blade is made of chrome vanadium steel.
· Fully hardened, with chrome plate finish.
· Since the tip is ChromTop processed, it has a high accuracy, and fits Torx screws exactly.
· Ergonomic multi-component handle specification makes it easy to turn screwsStandard Price: MYR 89.02 Days to Ship: 4 Day(s) or more -
Tamper Proof Torx® Driver (Soft Finish®)
WIHA
[Features]
· Screwdriver for tamper-proof Torx screws for theft and risk prevention (hole on the tip).
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 95.60- Days to Ship: 4 Day(s) or more -
Phillips Screwdriver with Cap (SoftFinish ®)
WIHA
[Features]
· With a hex bolster for wrenches.
· Fixed screws can be hit with a hammer and loosened with the hexagonal blade passed through the handle and the strengthened steel cap construction.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 175.12 Days to Ship: 4 Day(s) or more -
Magnetizer (Screwdriver Magnet Magnetizer/Demagnetizer)
WIHA
[Features]
· Can be used for magnetization and demagnetization of steel tools such as screwdrivers and tweezers.
· Box is made of high quality green plastic that is resistant to impacts.
· Size: 52 (W) x 29 (D) x 50 (H) mm.
· Magnetize a tool by inserting it through the slot indicated with a plus (+) marking.
· Demagnetize a tool by gliding it through the slot indicated with a minus (-) marking.
· If not completely demagnetized, repeat one more time.Standard Price: MYR 221.00 Days to Ship: 9 Day(s) -
Standard Price: MYR 48.63 Days to Ship: 9 Day(s) -
ENGINEER
[Features]
· Ratchet mechanism and quick-turning mechanism improve work efficiency.
· Highly effective for work in tight spaces where a normal screwdriver doesn't fit.Standard Price: MYR 69.84 Days to Ship: 9 Day(s) -
ENGINEER
Wireless microphone jack and connectors can be attached and detached easily.
Standard Price: MYR 20.87- Days to Ship: 8 Day(s) -
Standard Price: MYR 20.87 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 121.07- Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
Twin Wrench Driver Set (Special Screw Compatible Type)
ENGINEER
Twin-wrench screwdriver set that's effective in narrow spaces and by walls.
[Features]
· Twin wrench screwdriver with a set of 8 types of bits for special screws and Phillips and flathead bits.
· This cushioned handle fits perfectly in the hand, and does not slip.
· Substitute bit holder is a burette type that is convenient for carrying.
· +/- bit with a magnetic tip.Standard Price: MYR 165.08 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | WIHA | WIHA | E VALUE | SK 11 | SK 11 | SK 11 | SK 11 | SK 11 | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) |
| Tip standards | Phillips (+) | Hexagon | Hexagon | Hexagon | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Combination | Other | Torx | Torx | Combination | Phillips (+)/Flathead(-) | Other | Other | Combination | Phillips (+)/Flathead(-) | Phillips (+) | Ballpoint | Ballpoint | Box | Torx | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) | Box | Box | Torx | Torx | Torx | Torx | Phillips (+) | - | - | Phillips (+)/Flathead(-) | Other | Phillips (+) / Flathead (-) | Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Combination |
| Tip size / Phillips (+) | No.1 / No.2 / No.3 | - | - | - | No.0 / No.1 / No.2 | No.2 | No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | - | - | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | No.1 / No.2 | No.1 / No.2 / No.3 | No.2 | - | - | - | - | No.0 / No.1 / No.2 | - | No.1 / No.2 / No.3 | No.4 | - | - | - | - | - | - | No.2 | - | - | No.2 | - | No.2 | Other | Other | Other | No.1 / No.2 |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | - | 2.5 ～ 6 | 6 | 6 | 6 | 6 ～ 8 | 6 ～ 8 | 4 ～ 6 | - | - | - | 6 | 4 ～ 6 | - | - | 4 ～ 6 | 6 | - | - | - | - | - | 3 ～ 4 | 5.5 | 4.5 ～ 6.5 | - | - | - | - | - | - | - | - | - | - | 6 | - | 6.3 | 0.8 ～ 2.5 | 0.8 ～ 2.5 | 0.8 ～ 2.5 | 4.5 ～ 6 |
| Shaft length L (mm) | - | - | - | 18 ～ 24 | - | - | - | - | 75 ～ 400 | 75 ～ 150 | - | 10 | 60 | 60 | - | - | - | - | - | - | 100 | 60 | 50 | 60 | 40 | 60 ～ 100 | 125 | 80 ～ 150 | 200 | 125 ～ 230 | 125 | 60 | 80 ～ 130 | 80 | 60 ～ 115 | 100 | - | - | - | 75 | 38 | - | 15 ～ 20 | - | - |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product |
| Shaft type | Round | Round | Round | Square | Round | Round | - | - | Round | Round | - | Round | Round | Round | - | Square | Round | Round | Square | - | Round | Square | Square | Round | Round | Round | Round | Round | Square | Round | Round | Round | Round | Round | Round | Square | - | - | - | Round | Round | Round | Round | Round | - |
| Magnet | Available | Available | Available | NA | Available | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | Available | NA | NA | NA | NA | NA | Available |
| Shaft through | NA | NA | NA | NA | NA | - | - | - | Available / NA | NA | - | NA | NA | NA | - | - | - | - | - | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | - | - | NA | NA | NA | NA | NA | - |
| Bolster | NA | NA | NA | NA | NA | - | - | - | Included / NA | NA | - | NA | NA | NA | - | - | - | - | - | - | Included | NA | NA | NA | NA | NA | NA | NA | Included | NA | NA | NA | NA | NA | NA | Included | - | - | - | NA | NA | NA | NA | NA | - |
| Grip Type | Resin | Resin | Resin | Resin | Resin | Resin | Stainless Steel | Stainless Steel | Resin | Rubber | Resin | Resin | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Stainless Steel | Wooden handle | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | Resin | Stainless Steel | Resin | Resin | Resin | Resin | Resin | Rubber |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | 0.9 ～ 1.1 | 0.9 ～ 1.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 0.8 | 1 | 0.8 ～ 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | 0.9 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | 2 ～ 3 | 4 ～ 6 | 0.89 ～ 2.5 | - | - | - | - | - | - | 2.5 ～ 6 | - | - | - | 3 ～ 5 | - | - | - | - | - | - | - | 2 | - | - | - | - | - | - | 9 ～ 13 | 4 ～ 14 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7/64 | - | 3/32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
-
Tip size / flathead (-) blade thickness (mm) B2
- 0.15
- 0.16
- 0.18
- 0.2
- 0.23
- 0.25
- 0.25、0.31、0.36、0.60
- 0.3
- 0.31
- 0.32
- 0.35
- 0.36
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.5
- 3
- 6
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
- -0.9,-1.25,-1.8,-2.3,-3.0,-3.5
- 0.7
- 0.71
- 0.89
- 0.9
- 1.27
- 1.3
- 1.5
- 1.59
- 1.95
- 2
- 2.2
- 2.5
- 2.6
- 2.65
- 2.7
- 3
- 3、4、5、6
- 3.1
- 3.18
- 3.35
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.3 × 8
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 17
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (127)
- VESSEL (90)
- ANEX (66)
- ENGINEER (54)
- WERA (46)
- TRUSCO NAKAYAMA (45)
- ESCO (40)
- TONE (39)
- KTC(KYOTO TOOL) (38)
- HOZAN (29)
- WIHA (27)
- SUNFLAG (17)
- HIRAI KOGU (16)
- KO-KEN TOOL (15)
- SK 11 (7)
- AS ONE (6)
- BONDHUS (5)
- EIGHT TOOL (4)
- HAZET (3)
- TRAD (3)
- WILLIAMS (3)
- E VALUE (2)
- FUJIYA (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- TOP (2)
- ARC (1)
- HANDIWORK (1)
- HIOS (1)
- MITOLOY (1)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy