(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Clamp Units (for Manual Tightening)
| Days to Ship |
|
|---|
-
NABEYA
[Features]
· Adsorption of workpieces is possible by simply supplying air from a compressor.
· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
· VCM0303E.
· Supply valve can only turn the adsorption ON or OFF.
· VCM0303S.
· Adsorption and air blowing are both possible using the changeover switch.
· The current adsorption force can be confirmed by vacuum pressure gauge.
· Adsorption force can be adjusted by vacuum regulatorStandard Price: MYR 11,238.98- Days to Ship: 6 Day(s) or more -
Clamp Part of Wedge Clamp (For tapped holes)
NABEYA
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.
Standard Price: MYR 422.78- Days to Ship: 4 Day(s) or more -
SUPER TOOL
[Features]
· Ideal for thin workpieces and clamping mass production products.
· Irregular articles can also be clamped with ease.
· Clamping operation is quick and easy.
· The material and hardness are suitable for repeated operation, and the contact surface does not cling to workpieces and clamp rings.Standard Price: MYR 99.58- Days to Ship: 9 Day(s) -
Adjustment Bolt for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 175.12- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Standard Price: MYR 194.29- Days to Ship: 4 Day(s) or more -
NABEYA
6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.
Standard Price: MYR 369.16- Days to Ship: 6 Day(s) or more -
T-Slot Mini Clamp【2 Pieces Per Package】
NEW STRONG
[Features]
· Ideal for clamping thin workpieces.
· Setup can be completed easily by using the T-groove.
· Simply tighten the enamel screw with a wrench and it is ready to use.Standard Price: MYR 1,643.93- Days to Ship: 10 Day(s) -
Swing Clamp Height Adjusting Support
NABEYA
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.
Standard Price: MYR 344.84- Days to Ship: 4 Day(s) or more -
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
Standard Price: MYR 1,503.53- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 23.56- Days to Ship: 4 Day(s) or more -
NABEYA
Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.
- CAD ：
- 2D
Standard Price: MYR 1,520.39- Days to Ship: 6 Day(s) or more -
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Standard Price: MYR 206.76- Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Side Clamp 6842PL
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 905.61- Days to Ship: 6 Day(s) or more -
Wedge Clamp Stopper Part (For T-shaped grooves)
NABEYA
It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.
Standard Price: MYR 590.61- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 400.85- Days to Ship: 6 Day(s) or more -
Wedge Clamp Set (For tapped holes)
NABEYA
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.
Standard Price: MYR 953.40- Days to Ship: 4 Day(s) or more -
NABEYA
It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.
Standard Price: MYR 1,712.40- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· It can be horizontally swung to attach and remove workpieces.
· Can be used for T-grooves and for tapped holes.
· The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
· Tool-less (with handle).
· Free clamping direction (without guide groove).
· The built-in spring causes it to automatically rise when unclamping.
· Attachments can be mountedStandard Price: MYR 1,820.48- Days to Ship: 4 Day(s) or more -
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Standard Price: MYR 281.41- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· SS400/galvanized toggle down clamp 6832.
· 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Standard Price: MYR 198.66- Days to Ship: 4 Day(s) or more -
NABEYA
Hold down toggle clamp 6833 made of SS400 and zinc plating.
Standard Price: MYR 553.59 Days to Ship: 6 Day(s) or more -
NABEYA
Clamps for fixing workpieces on machining centers, milling machines, etc.
[Features]
·Standard type with T-slot bolt.
[Applications]
·Convenient for fixing the workpiece.- CAD ：
- 2D
Standard Price: MYR 336.44- Days to Ship: 4 Day(s) or more -
NEW STRONG
Use when the height is too low for the A type and too high for the free vise.
Standard Price: MYR 3,664.55- Days to Ship: 8 Day(s) or more -
NEW STRONG
A slotted heel strap clamp with a black oxide coating finish.
Material: S45CStandard Price: MYR 178.00 Days to Ship: 5 Day(s) or more -
NEW STRONG
[Features]
·S45C, HRC35, black oxide coating finish type.
·It can be used with a double-cam handle for a wide range of applications.
[Applications]
·As a presser for workpieces.
·As a jig for clamping.Standard Price: MYR 115.40- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 396.58- Days to Ship: 6 Day(s) or more -
HA-NE Clamp Set With T-Slot Bolt 【2 Pieces Per Package】
FUJI TOOL
[Features]
· Free type with continuously variable fastening ability.
· Doesn't turn a hair even at intense vibrations.
[Applications]
· It is used to press and hold a workpiece or mold from above.Standard Price: MYR 764.10- Days to Ship: 5 Day(s) or more -
TAK Clamp (Eccentric Washer Cam Clamp)
MISUMI
[Features]
·Workpieces can be clamped simply by tightening bolts, so setup time can be reduced
·Load in table direction is applied to workpiece by action of tapered surface of washer, which suppresses lifting of workpiece- Volume Discount
Standard Price: MYR 56.49- Days to Ship: 4 Day(s) or more -
MISUMI
Supplied with a hex bar wrench. Complete fastening with sliding mechanism.
One-point attachment and detachment allow time reduction.
For full surface machining of the work piece and perforating.
Complete heat treatment allows semipermanent use. Floating prevention mechanism type.- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 1,636.07 Days to Ship: 4 Day(s) or more -
Toa Adjust Clamp【2 Pieces Per Package】
MISUMI
Ideal for clamping thin workpieces. Fastening the toe pressing downwardly allows to prevent the machining material from floating.
Long-lasting use is possible because the tow is quenched.- Volume Discount
Standard Price: MYR 2,622.51- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 249.82- Days to Ship: 4 Day(s) or more -
Quick Down Clamp (Compact/medium)
NABEYA
Flat jaw and angled handle for quick hold down clamp (medium).
Standard Price: MYR 1,586.96- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· Bar for Quick Lock.
· Annoying thread feeding when clamping is not necessary.
· A one-action clamp that adopts a cam lock mechanismStandard Price: MYR 175.12- Days to Ship: 6 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 25.90- Days to Ship: 6 Day(s) or more -
Clamp Part of Wedge Clamp (For T-shaped grooves)
NABEYA
For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.
Standard Price: MYR 942.47- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,537.19- Days to Ship: 4 Day(s) or more -
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.
Standard Price: MYR 91.60- Days to Ship: 4 Day(s) or more -
NABEYA
This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.
Standard Price: MYR 285.34- Days to Ship: 4 Day(s) or more -
NABEYA
6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.
Standard Price: MYR 905.90- Days to Ship: 6 Day(s) or more -
NABEYA
It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.
Standard Price: MYR 1,087.37- Days to Ship: 6 Day(s) or more -
NABEYA
It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.
Standard Price: MYR 2,089.90- Days to Ship: 6 Day(s) or more -
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
- CAD ：
- 2D
Standard Price: MYR 875.74- Days to Ship: 6 Day(s) or more -
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
- CAD ：
- 2D
Standard Price: MYR 1,585.66- Days to Ship: 6 Day(s) or more -
NABEYA
With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.
- CAD ：
- 2D
Standard Price: MYR 913.49- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 373.58- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | SUPER TOOL | NABEYA | NABEYA | NABEYA | NEW STRONG | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NEW STRONG | NEW STRONG | NEW STRONG | NABEYA | FUJI TOOL | MISUMI | MISUMI | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Clamp Units (for Manual Tightening)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy