(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Jigs for Manual Tightening（Page3）
Search by specifying the lower class category
Clamping Parts (for Manual Tightening)
Clamp Units (for Manual Tightening)
Locating Elements (for Positioning Parts / Manual Tightening)
| Days to Ship |
|
|---|
-
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
- CAD ：
- 2D
Standard Price: MYR 1,307.66- Days to Ship: 6 Day(s) or more -
Low Edge Clamp (Double Sided Type)
NABEYA
It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.
Standard Price: MYR 122.35- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 10,724.82- Days to Ship: 12 Day(s) or more -
Heavy Duty Toggle Side Clamp 6845
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 655.31 Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Hook Clamp 6849PH
NABEYA
Heavy-duty type hook clamp. The hook length can be adjusted.
Standard Price: MYR 1,526.19- Days to Ship: 6 Day(s) or more -
NABEYA
Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.
Standard Price: MYR 174.07- Days to Ship: 4 Day(s) or more -
NABEYA
Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).
Standard Price: MYR 771.54- Days to Ship: 4 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 73.67 Days to Ship: 6 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 27.59 Days to Ship: 8 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 87.34 Days to Ship: 6 Day(s) or more -
NABEYA
This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.
Standard Price: MYR 2,311.63- Days to Ship: 6 Day(s) or more -
NABEYA
This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available
Standard Price: MYR 75.31- Days to Ship: 4 Day(s) or more -
NABEYA
Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.
Standard Price: MYR 259.00- Days to Ship: 4 Day(s) or more -
NABEYA
Suitable for tightening drum and can lids. The hook length can be adjusted.
Standard Price: MYR 438.44- Days to Ship: 6 Day(s) or more -
NABEYA
The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.
Standard Price: MYR 1,008.30 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Parts for universal clamps.
· It can steplessly fasten tall and short workpieces.Standard Price: MYR 264.60- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 88.05 Days to Ship: 4 Day(s) or more -
NABEYA
It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts
Standard Price: MYR 114.27 Days to Ship: 4 Day(s) or more -
PA Adjustment Bolt for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 73.67- Days to Ship: 6 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 103.30 Days to Ship: 6 Day(s) or more -
NABEYA
Simply insert into the T-groove. Useful for receiving cutting resistance from the side.
Standard Price: MYR 230.54- Days to Ship: 6 Day(s) or more -
NABEYA
It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.
Standard Price: MYR 1,500.50- Days to Ship: 6 Day(s) or more -
NABEYA
It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.
Standard Price: MYR 1,146.04- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,024.54- Days to Ship: 6 Day(s) or more -
NABEYA
The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.
Standard Price: MYR 298.99- Days to Ship: 6 Day(s) or more -
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
Standard Price: MYR 1,500.42- Days to Ship: 6 Day(s) or more -
NABEYA
6848HNI is made of stainless steel. The hook length can be adjusted.
Standard Price: MYR 367.42- Days to Ship: 6 Day(s) or more -
NABEYA
Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.
Standard Price: MYR 467.95- Days to Ship: 6 Day(s) or more -
Universal Clamp Semi-Cylindrical Sealing Washer
NABEYA
[Features]
· Parts for universal clamps.
· The swivel pad fits on the workpiece and clamping surface for vertical tightening.
· Although this product is equipped with T-nuts, it can also be used with them removedStandard Price: MYR 60.46- Days to Ship: 4 Day(s) or more -
Low Edge Clamp (One Sided Type)
NABEYA
[Features]
· It is a compact clamp that does not lift much.
· Ideal for machining thin, low-profile objects.
· There are three sizes of tightening bolts: M4, M6, and M12.
· It has a compact size and large stroke of 0.3 to 1.1.
· The guide groove of the main body shortens workpiece setup time (excluding LWC4).
· It has a structure that prevents chips from entering inside.
· Ideal for small workpieces.
· Brass material is used to avoid scratching workpieces.
· Lifting up of the workpiece is minimal.
· Ideal for thin workpieces.Standard Price: MYR 75.76- Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Side Clamp 6842
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 880.26- Days to Ship: 6 Day(s) or more -
Attachment for Clamp Support Jack
NABEYA
[Features]
· The one that fits the workpiece can be selected from the various types of attachments.
· For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.Standard Price: MYR 86.28- Days to Ship: 4 Day(s) or more -
NABEYA
Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.
Standard Price: MYR 268.06- Days to Ship: 6 Day(s) or more -
NABEYA
With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.
- CAD ：
- 2D
Standard Price: MYR 1,285.72- Days to Ship: 12 Day(s) or more -
NABEYA
A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Clamp bar springs up to easily attach/detach the workpiece.
· Free from troubles such as oil leakage as it does not use oil.Standard Price: MYR 3,154.14- Days to Ship: 6 Day(s) or more -
Clamp Bar for Nut Runner Clamp Large Model
NABEYA
A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
Standard Price: MYR 308.84 Days to Ship: 6 Day(s) or more -
Standard Price: MYR 484.33 Days to Ship: 6 Day(s) or more -
NABEYA
The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.
- CAD ：
- 2D
Standard Price: MYR 1,264.79- Days to Ship: 11 Day(s) or more -
Standard Price: MYR 118.47 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Mounting base for Nut Runner small model.
· It consists of three blocks.
· The height can be changed depending on the combination.
· Mounting bolts, connection bolts (hex socket bolts) includedStandard Price: MYR 1,597.38 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Use Nut Runner for speedy clamping.
· Clamp cover rotates 90 degrees (rotation direction can be chosen).
· Free from troubles such as oil leakage as it does not use oil.Standard Price: MYR 2,959.00- Days to Ship: 6 Day(s) or more -
Clamp Bar for Nut Runner Clamp Small Model
NABEYA
[Features]
· Clamp bar for Nut Runner small model.
· With hex socket set screws for positioning (rod tip).
· NRCS-03C/06C/10C: Can be used immediately after purchase.
· NRCSS-03CS/06CS/10CS: A material type to be processed by the customerStandard Price: MYR 738.74 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· The body is made of bainite cast iron and does not get damaged even in excessive tightening.
· Can also be used for metal press clamps and the metal working clamps of injection molding machines.
· If a T-slot nut is used, then of course it can also be used with T-groove tablesStandard Price: MYR 153.48- Days to Ship: 4 Day(s) or more -
NABEYA
Mold bases can be clamped very fast. Clamp and step block are connected so they will not become lost. Opened clamp slot allows easy insertion and removal from the side.
Standard Price: MYR 267.78- Days to Ship: 6 Day(s) or more -
Black Oxide Coating Screw Jack (S45C)
NABEYA
· Attachment for No. E-9175A can be used for SJK type.
· SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.Standard Price: MYR 136.49- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Jigs for Manual Tightening
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy