(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI
[Features]
·Standard hand reamer right blade straight type
·Cutting diameter can be selected in units of 0.01 mm
| Standard Price: | MYR 106.76- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 236.48- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.
[Features]
· Morse taper shank is adopted for machine use.
[Applications]
· For general purpose finishing.
| Standard Price: | MYR 296.09- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TAIYO-TOOL
[Shank Type]
· Morse taper shank
[Coating Y/N]
· None
[Groove Shape]
· Straight
[Base Blade Y/N] N
| Standard Price: | MYR 293.40- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

DAIICHITOOL
[Features]
·Tip shape: 3.97 or less pointed center
Tool Material: High-speed steel
Flute shape: Straight
Work material: General steel / stainless steel / cast iron / aluminum / copper
Work material details: Steel alloy, compatible
Shank type: Straight shank
| Standard Price: | MYR 112.03- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

MISUMI
[Features]
·Standard machine reamer straight flute. Morse tapered type shank
·Cutting diameter can be selected in units of 0.01 mm
| Standard Price: | MYR 368.90- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
| Standard Price: | MYR 149.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
| Standard Price: | MYR 258.11- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.
| Days to Ship: | 4 Day(s) or more |
|---|

HRM Hand Reamer (Hundredths Range)
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
| Standard Price: | MYR 180.36- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features]
· Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
| Standard Price: | MYR 399.79- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Standard Price: | MYR 299.73- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

OSG
Cemented carbide is used for the cutting edge material.
·Supply sufficient cutting fluid.
·Use a chuck with high precision.
·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
| Standard Price: | MYR 166.32- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 789.95- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Morse Taper Reamer (For Hand Use) For Finishing MTR-F
EIKOSHA
Straight reamer (HSS) for morse taper holes for finishing.
[Features]
· Shank has a square section that can also be used for turning by hand.
· Seven standards are available.
[Applications]
· Ideal for finish machining of MT0 to MT6 holes.
| Standard Price: | MYR 371.58- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TRUSCO NAKAYAMA
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
| Standard Price: | MYR 150.05- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
| Standard Price: | MYR 151.45- |
|---|---|
| Days to Ship: | 14 Day(s) |

EIKOSHA
[Features]
· Excellent abrasion resistance for finishing deep holes.
| Standard Price: | MYR 283.54- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

SANDVIK
Ultra-high-speed, high-efficiency reamer
30 times feed of HSS reamer is possible (⌀10, for low carbon steel)
[Features]
·Reliable chip evacuation
·Good for interrupted machining
·Tip Chamfer 30°
·Diameter range: ⌀3.97-20mm (Available in units of ⌀0.01 for tailor made)
·Material Type: GC1024 TiAlN coating
· Coolant Through
| Standard Price: | MYR 1,382.25- |
|---|---|
| Days to Ship: | 10 Day(s) |

Full Cut Solid Carbide Reamers MRS
MAKOTOLOY
[Features]
· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.
| Standard Price: | MYR 223.08- |
|---|---|
| Days to Ship: | 11 Day(s) or more |

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Regular Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Straight Reamer, Long Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
·Long type allows reaming of deep areas
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]
·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers
·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
| Standard Price: | MYR 157.41- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.
| Days to Ship: | 7 Day(s) or more |
|---|

MISUMI
[Features]
·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy
·Drilling is possible under cutting conditions of 60 m/min or more
·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling
·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming
·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement
·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
| Standard Price: | MYR 542.03- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
| Standard Price: | MYR 432.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
| Standard Price: | MYR 178.24- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 232.64- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 290.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).
[Features]
· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.
· Provides excellent finish for high-hardness workpieces as well.
[Applications]
· For finish machining of 1/50 taper pin holes.
| Standard Price: | MYR 221.92- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
| Standard Price: | MYR 15.13- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Taper Shank Chucking Reamer TCR
EIKOSHA
A taper shank chucking reamer.
[Features]
· General purpose straight edge reamer.
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
· A long type that supports deep holes.
[Applications]
· For general purpose finishing.
| Days to Ship: | 4 Day(s) or more |
|---|

Taper Pin Reamer (Straight) TPR
EIKOSHA
Straight reamer for 1/50 taper hole machining (HSS).
[Features]
·The shank has a corner so that it can be used by hand.
·It has a general-purpose straight blade shape.
[Applications]
·Ideal for finishing 1/50 taper pin holes.
| Standard Price: | MYR 142.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Taper Pin Reamer for Machines TPRT
EIKOSHA
Straight reamer for 1/50 tapered hole processing (HSS).
[Features]
· Morse taper shank has been adopted for machinery.
[Applications]
· Ideal for finish machining of 1/50 taper pin holes.
| Standard Price: | MYR 318.08- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Morse Taper Reamer (For Hand Use) For Rough Finishing MTR-RF
EIKOSHA
Used for Morse taper holes (for rough finishing)
| Standard Price: | MYR 421.26- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | MISUMI | EIKOSHA | EIKOSHA | TAIYO-TOOL | DAIICHITOOL | MISUMI | FPTOOLS | EIKOSHA | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | FPTOOLS | MISUMI | OSG | EIKOSHA | EIKOSHA | TRUSCO NAKAYAMA | OKAZAKI SEIKO | EIKOSHA | SANDVIK | MAKOTOLOY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | Morse Taper Reamer (For Hand Use) For Rough Finishing MTR-RF | ||||||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 10 Day(s) | 11 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Tool Diameter(mm) | 0.5 ~ 30 | 1 ~ 32 | 1 ~ 85 | 1-5/8 ~ 80 | 0.4 ~ 20 | 2.95 ~ 30.02 | 0.2 ~ 12.1 | 0.4 ~ 20.05 | 0.8 ~ 12.05 | 0.5 ~ 60 | 1.01 ~ 10.09 | 2.985 ~ 10.025 | 3 ~ 10.01 | 0.3 ~ 13.05 | 1/2 ~ 50 | - | 1 ~ 20 | 3 ~ 12 | 0.4 ~ 10.05 | - | 3 ~ 10 | 0.3 ~ 15.995 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | - | - | 0.5 ~ 12.05 | 0.2 ~ 3 | 0.8 ~ 12.05 | 1 ~ 30 | - | 1/2 ~ 26 | 3 ~ 70 | - | - | - |
| Groove Length(mm) | 12 ~ 150 | 15 ~ 75 | 35 ~ 215 | 35 ~ 220 | 10 ~ 110 | 35 ~ 150 | 3 ~ 45 | 4 ~ 80 | 12 ~ 45 | 12 ~ 190 | 20 ~ 70 | 12 ~ 24 | 27 ~ 40 | - | 100 ~ 450 | 65 ~ 205 | - | 26 ~ 31 | 20 ~ 150 | - | 30 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 3 ~ 10 | - | 12 ~ 52 | - | - | 6 ~ 45 | 3 ~ 25 | 15 ~ 80 | 15 ~ 75 | 28 ~ 194 | 50 ~ 250 | 30 ~ 125 | 24 ~ 351 | 63 ~ 335 | 65 ~ 205 |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Aluminum[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] |
| Shank Type | straight shank | straight shank | Morse Taper Shank | Morse Taper Shank | straight shank | Taper shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | Taper shank | straight shank | straight shank | straight shank | straight shank | straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | Taper shank / Morse Taper Shank | straight shank | Taper shank | straight shank |
| Coating Y/N | NA | NA | NA | NA | - | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | NA | NA | NA | NA | NA | NA | NA | NA | Available ~ NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
| Base Blade Y/N | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.547 ~ 54.388 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - | - | 0.8 ~ 50 | 3 ~ 40 | 6.297 ~ 54.13 |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.93 ~ 65.076 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | - | - | 1.18 ~ 56.52 | 4.16 ~ 46.3 | 9.68 ~ 64.819 |
| radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/19.002 ~ 1/20.047 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/50 | 1/50 | 1/19.002 ~ 1/20.047 |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy