(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
| Standard Price: | MYR 392.70- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
| Standard Price: | MYR 149.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
| Standard Price: | MYR 173.41- |
|---|---|
| Days to Ship: | 14 Day(s) |

EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
| Standard Price: | MYR 258.11- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Reamer with Carbide End Flutes CSER-C
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiCN coating for long life.
| Standard Price: | MYR 461.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features]
· Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
| Standard Price: | MYR 399.79- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Standard Price: | MYR 299.73- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

OSG
Cemented carbide is used for the cutting edge material.
·Supply sufficient cutting fluid.
·Use a chuck with high precision.
·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
| Standard Price: | MYR 166.32- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.
[Features]
· Features TiCN coating that prevents welding and improves roughness of the finishing surface.
· Uses a twisted blade with excellent chip discharge performance.
[Applications]
· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
| Standard Price: | MYR 268.99- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
| Standard Price: | MYR 560.88- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
| Standard Price: | MYR 151.45- |
|---|---|
| Days to Ship: | 14 Day(s) |

CHRS Short Carbide Helical Reamer
OKAZAKI SEIKO
A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
| Standard Price: | MYR 129.50- |
|---|---|
| Days to Ship: | 14 Day(s) |
| Standard Price: | MYR 622.90- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

EIKOSHA
[Features]
· Excellent abrasion resistance for finishing deep holes.
| Standard Price: | MYR 283.54- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Cutting capacity up to quenched hardness HRC 62, thanks to P coating for high-hardness steel and right-lead blade shape.
| Standard Price: | MYR 272.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide High Helical Reamer CHHR
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
| Standard Price: | MYR 407.65- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Powerful Reamer (Straight Shank) BCPR
OKAZAKI SEIKO
Flat tip type with straight shank specification. Torsion angle 45°
| Standard Price: | MYR 818.11- |
|---|---|
| Days to Ship: | 14 Day(s) |

SANDVIK
Ultra-high-speed, high-efficiency reamer
30 times feed of HSS reamer is possible (⌀10, for low carbon steel)
[Features]
·Reliable chip evacuation
·Good for interrupted machining
·Tip Chamfer 30°
·Diameter range: ⌀3.97-20mm (Available in units of ⌀0.01 for tailor made)
·Material Type: GC1024 TiAlN coating
· Coolant Through
| Standard Price: | MYR 1,382.25- |
|---|---|
| Days to Ship: | 10 Day(s) |

Full Cut Solid Carbide Reamers MRS
MAKOTOLOY
[Features]
· Made using carefully selected carbide materials for excellent sharpness, precision, surface roughness and rigidity.
| Standard Price: | MYR 223.08- |
|---|---|
| Days to Ship: | 11 Day(s) or more |

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Spiral Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Even higher speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 472.61- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Straight Reamer, Regular Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Straight Reamer, Long Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
·Long type allows reaming of deep areas
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]
·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers
·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
| Standard Price: | MYR 157.41- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
[Features]
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·High-speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 374.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]
·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·The long lifespan allows high-precision machining to be maintained for a long time.
·Even higher speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 152.84- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.
| Days to Ship: | 7 Day(s) or more |
|---|

MISUMI
[Features]
·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy
·Drilling is possible under cutting conditions of 60 m/min or more
·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling
·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming
·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement
·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
| Standard Price: | MYR 542.03- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Reamer for Stainless Steel CSUSR-A
EIKOSHA
[Features]
· Ideal shape for stainless steel and other difficult-to-cut materials.
· Heat-Resistant Coating
· Abrasion Resistant Material
· Right torsion
| Standard Price: | MYR 377.88- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
| Standard Price: | MYR 432.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Reamer with Carbide Oil Hole for Stop Holes CSOER
EIKOSHA
Right torsion reamer for blind holes with oil hole and bottom blade
| Standard Price: | MYR 588.44- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
| Standard Price: | MYR 178.24- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 232.64- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 290.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).
[Features]
· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.
· Provides excellent finish for high-hardness workpieces as well.
[Applications]
· For finish machining of 1/50 taper pin holes.
| Standard Price: | MYR 221.92- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Spiral reamer (carbide) for gate drilling.
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
[Applications]
· Finishing of pin gate holes.
| Standard Price: | MYR 526.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | FPTOOLS | FPTOOLS | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | FPTOOLS | MISUMI | OSG | EIKOSHA | FPTOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OMIKOGYO | EIKOSHA | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | SANDVIK | MAKOTOLOY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | ||||||||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 14 Day(s) | 14 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 10 Day(s) | 11 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Tool Diameter(mm) | 1 ~ 15.5 | 0.2 ~ 12.1 | 0.4 ~ 20.05 | 2.95 ~ 12.05 | 0.8 ~ 12.05 | 1 ~ 12.055 | 2.985 ~ 10.025 | 3 ~ 10.01 | 0.3 ~ 13.05 | 0.8 ~ 12.05 | 6.35~7.15 ~ 30.25~34.25 | 3 ~ 12 | 3 ~ 10 | 3 ~ 20 | 0.4 ~ 10.05 | 2.95 ~ 12.05 | 2 ~ 14 | 12.5 ~ 30 | - | 3 ~ 10 | 0.3 ~ 15.995 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 3 ~ 10 | 1 ~ 13 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | - | - | 0.5 ~ 12.05 | 0.5 ~ 12.05 | 2.95 ~ 16 | 0.2 ~ 3 | 0.8 ~ 12.05 | 1 ~ 30 | - | - |
| Groove Length(mm) | 8 ~ 45 | 3 ~ 45 | 4 ~ 80 | 22 ~ 35 | 12 ~ 45 | 5 ~ 30 | 12 ~ 24 | 27 ~ 40 | - | 15 ~ 45 | 35 ~ 98 | 26 ~ 31 | 22 ~ 35 | 28 ~ 120 | 20 ~ 150 | 40 ~ 65 | 10 ~ 29 | 36 ~ 46 | - | 30 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 20 ~ 30 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 25 ~ 40 | 10 ~ 44 | 3 ~ 10 | - | 12 ~ 52 | - | - | 6 ~ 45 | 6 ~ 45 | 16 ~ 30 | 3 ~ 25 | 15 ~ 80 | 15 ~ 75 | 28 ~ 194 | 25 ~ 60 |
| work material | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] |
| Shank Type | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | - | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | straight shank | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank |
| Coating Y/N | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | - | NA | NA | Available | NA | Available | NA | NA | Available | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available ~ NA | NA | NA | NA | NA | Available | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA |
| Groove Shape | Spiral | Straight | Straight | Helical | Straight | Spiral | Straight | Straight | Straight | Spiral | - | Straight | Helical | Spiral | Straight | Spiral | Helical | Helical | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Straight | Straight | Straight | Straight | Spiral |
| Base Blade Y/N | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | Available | NA | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.46 ~ 16.74 | 1.42 ~ 9.01 |
| radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 |
| Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 5 |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy