(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI
[Features]
·Standard hand reamer right blade straight type
·Cutting diameter can be selected in units of 0.01 mm
| Standard Price: | MYR 106.76- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 236.48- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.
[Features]
· Morse taper shank is adopted for machine use.
[Applications]
· For general purpose finishing.
| Standard Price: | MYR 296.09- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TAIYO-TOOL
[Shank Type]
· Morse taper shank
[Coating Y/N]
· None
[Groove Shape]
· Straight
[Base Blade Y/N] N
| Standard Price: | MYR 293.40- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
| Standard Price: | MYR 392.70- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Cobalt High-Speed Steel Spiral Reamer
MISUMI
[Features]
·Cobalt high-speed steel spiral reamer with high versatility
·Design with 10° left helix angle and 45° tip chamfer angle
·Helical blade reduces cutting force
| Standard Price: | MYR 101.37- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
[Features]
·Standard machine reamer straight flute. Morse tapered type shank
·Cutting diameter can be selected in units of 0.01 mm
| Standard Price: | MYR 368.90- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Spiral reamer for 1/50 tapered hole processing (HSS).
[Features]
· Shank has a square section that can also be used for turning by hand.
· Adoption of twisted blade allows appropriate disposal of chips.
| Standard Price: | MYR 134.71- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
| Standard Price: | MYR 149.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
| Standard Price: | MYR 173.41- |
|---|---|
| Days to Ship: | 14 Day(s) |

MISUMI
[Features]
·Standard high helical reamer right blade left helix angle 60° type. Cutting force is reduced by strong helix angle
·Cutting diameter can be selected in units of 0.01 mm
| Standard Price: | MYR 192.11- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.
| Days to Ship: | 4 Day(s) or more |
|---|

HRM Hand Reamer (Hundredths Range)
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
| Standard Price: | MYR 180.36- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

EIKOSHA
A drill and reamer integrated HSS tool.
[Features]
· The tip is a drill and the large-diameter part has a reamer shape.
· Since drilling and finishing can be done simultaneously, machining time is shortened. (For through-hole)
[Applications]
· To be used when drilling holes and finish machining at the same time.
| Standard Price: | MYR 526.68- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features]
· Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
| Standard Price: | MYR 399.79- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Standard Price: | MYR 299.73- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

High-Speed Steel Spiral Hand Reamer
MISUMI
Frequently used standard sizes are offered at affordable prices
| Standard Price: | MYR 104.96- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

OSG
Cemented carbide is used for the cutting edge material.
·Supply sufficient cutting fluid.
·Use a chuck with high precision.
·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
| Standard Price: | MYR 166.32- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 789.95- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Helical Taper Pin Reamer for Machines HTPRT
EIKOSHA
1/50 strong torsion type for taper pin, reduces cutting resistance Morse taper shank
| Days to Ship: | 4 Day(s) or more |
|---|

Morse Taper Reamer (For Hand Use) For Finishing MTR-F
EIKOSHA
Straight reamer (HSS) for morse taper holes for finishing.
[Features]
· Shank has a square section that can also be used for turning by hand.
· Seven standards are available.
[Applications]
· Ideal for finish machining of MT0 to MT6 holes.
| Standard Price: | MYR 371.58- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
A spiral machine reamer.
[Features]
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
[Applications]
· For general purpose finishing.
| Standard Price: | MYR 328.59- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TRUSCO NAKAYAMA
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
| Standard Price: | MYR 150.05- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
| Standard Price: | MYR 151.45- |
|---|---|
| Days to Ship: | 14 Day(s) |

CHRS Short Carbide Helical Reamer
OKAZAKI SEIKO
A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
| Standard Price: | MYR 129.50- |
|---|---|
| Days to Ship: | 14 Day(s) |

HSS Reamer Blind Holes/Through Holes Common 496
GUHRING
[Features]
· Highly versatile machine chucking reamer.
| Standard Price: | MYR 163.02- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

EIKOSHA
[Features]
· Excellent abrasion resistance for finishing deep holes.
| Standard Price: | MYR 283.54- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide High Helical Reamer CHHR
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
| Standard Price: | MYR 407.65- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Powerful Reamer (Straight Shank) BCPR
OKAZAKI SEIKO
Flat tip type with straight shank specification. Torsion angle 45°
| Standard Price: | MYR 818.11- |
|---|---|
| Days to Ship: | 14 Day(s) |

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Spiral Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Even higher speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 472.61- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Straight Reamer, Regular Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Straight Reamer, Long Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
·Long type allows reaming of deep areas
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]
·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers
·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
| Standard Price: | MYR 157.41- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
[Features]
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·High-speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 374.86- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Spiral Reamer, High-Precision Tolerance Model
MISUMI
[Features]
·Achieves high-precision hole finishing by narrowing the cutting diameter tolerance width
·High-speed cutting greatly improves efficiency compared to high-speed steel reamers
·The long lifespan allows high-precision machining to be maintained for a long time.
·Even higher speed cutting is possible by adopting helical flutes
| Standard Price: | MYR 152.84- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.
| Days to Ship: | 7 Day(s) or more |
|---|

High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation
MISUMI
[Features]
·Standard spiral reamer right flute left helix angle 12° type
·Cutting diameter can be selected in units of 0.01 mm
·Helical blade reduces cutting force
| Standard Price: | MYR 146.64- |
|---|---|
| Days to Ship: | 6 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | MISUMI | EIKOSHA | EIKOSHA | TAIYO-TOOL | FPTOOLS | MISUMI | MISUMI | FPTOOLS | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | MISUMI | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | FPTOOLS | MISUMI | MISUMI | OSG | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | TRUSCO NAKAYAMA | OKAZAKI SEIKO | OKAZAKI SEIKO | GUHRING | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation | ||||||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 14 Day(s) | 14 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more |
| Tool Diameter(mm) | 0.5 ~ 30 | 1 ~ 32 | 1 ~ 85 | 1-5/8 ~ 80 | 1 ~ 15.5 | 1 ~ 13 | 2.95 ~ 30.02 | 0.2 ~ 12.1 | - | 0.4 ~ 20.05 | 2.95 ~ 12.05 | 2.01 ~ 13.99 | 0.5 ~ 60 | 1.01 ~ 10.09 | 3 ~ 13 | 2.985 ~ 10.025 | 3 ~ 10.01 | 2 ~ 12 | 0.3 ~ 13.05 | 1/2 ~ 50 | - | - | 3 ~ 60 | 1 ~ 20 | 3 ~ 12 | 3 ~ 10 | 2.35 ~ 8.02 | 0.4 ~ 10.05 | 2 ~ 14 | 12.5 ~ 30 | 0.3 ~ 15.995 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 3 ~ 10 | 1 ~ 13 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 30 |
| Groove Length(mm) | 12 ~ 150 | 15 ~ 75 | 35 ~ 215 | 35 ~ 220 | 8 ~ 45 | 15 ~ 44 | 35 ~ 150 | 3 ~ 45 | 48 ~ 318 | 4 ~ 80 | 22 ~ 35 | 13 ~ 45 | 12 ~ 190 | 20 ~ 70 | 52 ~ 100 | 12 ~ 24 | 27 ~ 40 | 25 ~ 76 | - | 100 ~ 450 | 63 ~ 351 | 65 ~ 205 | 35 ~ 190 | - | 26 ~ 31 | 22 ~ 35 | 12 ~ 33 | 20 ~ 150 | 10 ~ 29 | 36 ~ 46 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 20 ~ 30 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 25 ~ 40 | 10 ~ 44 | 3 ~ 10 | - | 30 ~ 150 |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | - | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎] | - | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Shank Type | straight shank | straight shank | Morse Taper Shank | Morse Taper Shank | End Mill Shank | End Mill Shank | Taper shank | End Mill Shank | straight shank | straight shank | End Mill Shank | straight shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank / straight shank | Taper shank | Taper shank | straight shank | Taper shank | straight shank | straight shank | End Mill Shank | - | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Groove Shape | Straight | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Spiral | Straight | Helical | Spiral | Straight | Straight | Spiral | Straight | Straight | Spiral | Straight | Straight | Helical | Straight | Spiral | Straight | Straight | Helical | - | Straight | Helical | Helical | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Spiral | Spiral | Straight | Straight | Spiral |
| Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | - | - | - | 1.9 ~ 29.7 | - | - | - | - | - | - | - | - | - | - | - | 3 ~ 50 | 6.547 ~ 54.388 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | 2.86 ~ 36.06 | - | - | - | - | - | - | - | - | - | - | - | 4.16 ~ 56.52 | 9.93 ~ 65.076 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - | - | - | 1/50 | 1/19.002 ~ 1/20.047 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy