(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 236.48- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.
[Features]
· Morse taper shank is adopted for machine use.
[Applications]
· For general purpose finishing.
| Standard Price: | MYR 296.09- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

DAIICHITOOL
[Features]
·Tip shape: 3.97 or less pointed center
Tool Material: High-speed steel
Flute shape: Straight
Work material: General steel / stainless steel / cast iron / aluminum / copper
Work material details: Steel alloy, compatible
Shank type: Straight shank
| Standard Price: | MYR 112.03- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
| Standard Price: | MYR 392.70- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Spiral reamer for 1/50 tapered hole processing (HSS).
[Features]
· Shank has a square section that can also be used for turning by hand.
· Adoption of twisted blade allows appropriate disposal of chips.
| Standard Price: | MYR 134.71- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
| Standard Price: | MYR 149.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
| Standard Price: | MYR 173.41- |
|---|---|
| Days to Ship: | 14 Day(s) |

EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
| Standard Price: | MYR 258.11- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 152.83- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.
| Days to Ship: | 4 Day(s) or more |
|---|

HRM Hand Reamer (Hundredths Range)
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
| Standard Price: | MYR 180.36- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

EIKOSHA
A drill and reamer integrated HSS tool.
[Features]
· The tip is a drill and the large-diameter part has a reamer shape.
· Since drilling and finishing can be done simultaneously, machining time is shortened. (For through-hole)
[Applications]
· To be used when drilling holes and finish machining at the same time.
| Standard Price: | MYR 526.68- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Reamer with Carbide End Flutes CSER-C
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiCN coating for long life.
| Standard Price: | MYR 461.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.
[Features]
· Features TiCN coating that prevents welding and improves roughness of the finishing surface.
· Uses a twisted blade with excellent chip discharge performance.
[Applications]
· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
| Standard Price: | MYR 268.99- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 789.95- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Helical Taper Pin Reamer for Machines HTPRT
EIKOSHA
1/50 strong torsion type for taper pin, reduces cutting resistance Morse taper shank
| Days to Ship: | 4 Day(s) or more |
|---|

Morse Taper Reamer (For Hand Use) For Finishing MTR-F
EIKOSHA
Straight reamer (HSS) for morse taper holes for finishing.
[Features]
· Shank has a square section that can also be used for turning by hand.
· Seven standards are available.
[Applications]
· Ideal for finish machining of MT0 to MT6 holes.
| Standard Price: | MYR 371.58- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
| Standard Price: | MYR 560.88- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

EIKOSHA
A spiral machine reamer.
[Features]
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
[Applications]
· For general purpose finishing.
| Standard Price: | MYR 328.59- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TRUSCO NAKAYAMA
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
| Standard Price: | MYR 150.05- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

OKAZAKI SEIKO
A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
| Standard Price: | MYR 151.45- |
|---|---|
| Days to Ship: | 14 Day(s) |

CHRS Short Carbide Helical Reamer
OKAZAKI SEIKO
A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
| Standard Price: | MYR 129.50- |
|---|---|
| Days to Ship: | 14 Day(s) |
| Standard Price: | MYR 622.90- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Reamer with End Blades ERR-TiN
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiN coating is added to powdered HSS for a long service life.
| Standard Price: | MYR 417.80- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
[Features]
· Excellent abrasion resistance for finishing deep holes.
| Standard Price: | MYR 283.54- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide High Helical Reamer CHHR
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
| Standard Price: | MYR 407.65- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Powerful Reamer (Straight Shank) BCPR
OKAZAKI SEIKO
Flat tip type with straight shank specification. Torsion angle 45°
| Standard Price: | MYR 818.11- |
|---|---|
| Days to Ship: | 14 Day(s) |

EIKOSHA
[Features]
· A TiN coated spiral HSS reamer.
· Bite angle: Single-side 30°.
· The bite length is short.
| Standard Price: | MYR 125.68- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

DAIICHITOOL
[Features]
·The material is HSS-Co.
Tool Material: High-speed steel
Flute shape: Spiral/helical/broach
Work material: General steel / stainless steel / cast iron / aluminum / copper
Work material details: Steel alloy, compatible
Groove shape: Helical
Shank type: Straight shank
| Standard Price: | MYR 134.98- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Reamer for Stainless Steel CSUSR-A
EIKOSHA
[Features]
· Ideal shape for stainless steel and other difficult-to-cut materials.
· Heat-Resistant Coating
· Abrasion Resistant Material
· Right torsion
| Standard Price: | MYR 377.88- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
| Standard Price: | MYR 432.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Reamer with Carbide Oil Hole for Stop Holes CSOER
EIKOSHA
Right torsion reamer for blind holes with oil hole and bottom blade
| Standard Price: | MYR 588.44- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Solid Pivot Reamer CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
| Standard Price: | MYR 178.24- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 232.64- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 290.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).
[Features]
· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.
· Provides excellent finish for high-hardness workpieces as well.
[Applications]
· For finish machining of 1/50 taper pin holes.
| Standard Price: | MYR 221.92- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Spiral reamer (carbide) for gate drilling.
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
[Applications]
· Finishing of pin gate holes.
| Standard Price: | MYR 526.78- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
| Standard Price: | MYR 15.13- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
| Standard Price: | MYR 385.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Straight Shank Spiral Chucking Reamer SPSCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
| Standard Price: | MYR 251.01- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Taper Shank Chucking Reamer TCR
EIKOSHA
A taper shank chucking reamer.
[Features]
· General purpose straight edge reamer.
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
· A long type that supports deep holes.
[Applications]
· For general purpose finishing.
| Days to Ship: | 4 Day(s) or more |
|---|
| Standard Price: | MYR 866.17- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Taper Pin Reamer (Straight) TPR
EIKOSHA
Straight reamer for 1/50 taper hole machining (HSS).
[Features]
·The shank has a corner so that it can be used by hand.
·It has a general-purpose straight blade shape.
[Applications]
·Ideal for finishing 1/50 taper pin holes.
| Standard Price: | MYR 142.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Helical Tapered Pin Reamer HTPR
EIKOSHA
Spiral reamer for 1/48 and 1/50 tapered hole processing (HSS).
[Features]
· A torsion resistant type for 1/48 and 1/50 taper pins.
· By adopting strong torsion, surface roughness and chip disposal are improved and cutting resistance is reduced.
| Standard Price: | MYR 265.43- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | EIKOSHA | EIKOSHA | DAIICHITOOL | FPTOOLS | FPTOOLS | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | TRUSCO NAKAYAMA | OKAZAKI SEIKO | OKAZAKI SEIKO | OMIKOGYO | EIKOSHA | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | DAIICHITOOL | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 14 Day(s) | 14 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Tool Diameter(mm) | 1 ~ 32 | 1 ~ 85 | 0.4 ~ 20 | 1 ~ 15.5 | 0.2 ~ 12.1 | - | 0.4 ~ 20.05 | 2.95 ~ 12.05 | 0.8 ~ 12.05 | 1.95 ~ 20 | 0.5 ~ 60 | 1.01 ~ 10.09 | 3 ~ 13 | 1 ~ 12.055 | 0.8 ~ 12.05 | 1/2 ~ 50 | - | - | 6.35~7.15 ~ 30.25~34.25 | 3 ~ 60 | 1 ~ 20 | 3 ~ 12 | 3 ~ 10 | 3 ~ 20 | 2.95 ~ 50 | 0.4 ~ 10.05 | 2 ~ 14 | 12.5 ~ 30 | 3.035 ~ 14.1 | 1 ~ 14 | 0.5 ~ 12.05 | 0.5 ~ 12.05 | 2.95 ~ 16 | 0.2 ~ 3 | 0.8 ~ 12.05 | 1 ~ 30 | - | - | 1/2 ~ 26 | 3 ~ 14 | 1/2 ~ 25 | 3 ~ 70 | 5 ~ 30 | - | - |
| Groove Length(mm) | 15 ~ 75 | 35 ~ 215 | 10 ~ 110 | 8 ~ 45 | 3 ~ 45 | 48 ~ 318 | 4 ~ 80 | 22 ~ 35 | 12 ~ 45 | 11 ~ 60 | 12 ~ 190 | 20 ~ 70 | 52 ~ 100 | 5 ~ 30 | 15 ~ 45 | 100 ~ 450 | 63 ~ 351 | 65 ~ 205 | 35 ~ 98 | 35 ~ 190 | - | 26 ~ 31 | 22 ~ 35 | 28 ~ 120 | 16 ~ 30 | 20 ~ 150 | 10 ~ 29 | 36 ~ 46 | 40 ~ 85 | 10 ~ 45 | 6 ~ 45 | 6 ~ 45 | 16 ~ 30 | 3 ~ 25 | 15 ~ 80 | 15 ~ 75 | 28 ~ 194 | 25 ~ 60 | 50 ~ 250 | 80 ~ 200 | 20 ~ 65 | 30 ~ 125 | 120 ~ 300 | 24 ~ 351 | 28 ~ 318 |
| work material | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] |
| Shank Type | straight shank | Morse Taper Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank / straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | Taper shank | Taper shank | straight shank | - | Taper shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | Taper shank / Morse Taper Shank | Taper shank | straight shank | straight shank |
| Coating Y/N | NA | NA | - | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | Available | NA | NA | NA | - | NA | NA | NA | NA | Available | Available | NA | NA | NA | Available | - | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Groove Shape | Straight | Straight | Straight | Spiral | Straight | Spiral | Straight | Helical | Straight | Spiral | Straight | Straight | Spiral | Spiral | Spiral | Straight | Helical | Straight | - | Spiral | Straight | Straight | Helical | Spiral | Spiral | Straight | Helical | Helical | Spiral | Helical | Spiral | Straight | Spiral | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Spiral | Straight | Spiral | Straight | Helical |
| Base Blade Y/N | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | - | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | 1.9 ~ 29.7 | - | - | - | - | - | - | - | - | - | - | 3 ~ 50 | 6.547 ~ 54.388 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | - | - | 0.8 ~ 50 | 1 ~ 30 |
| Large End Diameter | - | - | - | - | - | 2.86 ~ 36.06 | - | - | - | - | - | - | - | - | - | - | 4.16 ~ 56.52 | 9.93 ~ 65.076 | - | - | - | - | - | - | - | - | - | - | 4.67 | - | - | - | - | - | - | - | 1.46 ~ 16.74 | 1.42 ~ 9.01 | - | - | - | - | - | 1.18 ~ 56.52 | 1.46 ~ 36.06 |
| radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - | - | 1/50 | 1/19.002 ~ 1/20.047 | - | - | - | - | - | - | - | - | - | - | 12 | - | - | - | - | - | - | - | - | 1 ~ 5 | - | - | - | - | - | 1/50 | 1/50 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy