(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Mill Reamer for Bottom Hollow Applications (Straight Shank)
NIKKENKOSAKU
[Features]Realizes high-speed cutting and high efficiency, and uses carbide materials with high hardness.
| Standard Price: | MYR 960.59- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Radical Mini Reamer for Bottom Hollow Applications (DLC Coating)
NIKKENKOSAKU
[Features]
· Focused on high-precision and high-speed cutting.
· With end blade, DLC coated type
| Standard Price: | MYR 1,577.66- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 701.91- |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Standard Price: | MYR 841.03- |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Standard Price: | MYR 1,704.24 |
|---|---|
| Days to Ship: | 10 Day(s) |
| Standard Price: | MYR 1,165.83- |
|---|---|
| Days to Ship: | 10 Day(s) |
| Standard Price: | MYR 2,905.08 |
|---|---|
| Days to Ship: | 10 Day(s) |

Solid Spiral Chucking Reamer CSSPSCR
EIKOSHA
[Features]
· Short blade length and long shank make it ideal for deep hole finishing.
| Standard Price: | MYR 327.23- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

EIKOSHA
[Features]
· It smoothly discharges chips and provides stable surface roughness.
| Standard Price: | MYR 174.57- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Drill Reamer (Tapered Shank) DRT
EIKOSHA
[Features]
· Capable of drilling and reaming.
· Tapered shank type.
| Standard Price: | MYR 1,380.83- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

High Helical Reamer (Tapered Shank) HHHRT
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
· Tapered shank type.
| Standard Price: | MYR 286.33- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Pin Gate Reamer (End Mill Shank)
EIKOSHA
Spiral reamer for gate hole machining (HSS).
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
| Standard Price: | MYR 487.07- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Long Shank Chucking Reamer SCRL
EIKOSHA
[Features]
· Short blade length and super long shank.
· Ideal for deep hole finishing.
| Standard Price: | MYR 436.16- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Standard Price: | MYR 236.42- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Long High Helical Reamer (Tapered Shank) HHHRTL
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
· Tapered shank type.
| Standard Price: | MYR 427.83- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Oil Hole Spiral Tapered Reamer CSPOTR
EIKOSHA
[Features]
· A finishing reamer for 1/5 to 1/10 taper.
· With oil hole.
| Standard Price: | MYR 1,484.46- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Carbide Long Shank Chucking Reamer CSCRL
EIKOSHA
[Features]
· Short blade length and super long shank.
· Ideal for deep hole finishing.
| Standard Price: | MYR 639.62- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Semicircular Spool Reamer SURH
EIKOSHA
A straight reamer for spool hole machining (HSS).
[Features]
· Various angles are available to support processing of various angles.
· As it has a half-moon shape, it's easy to process chips.
[Applications]
· Optimal as a tool for removing grime from inside spool bushing, etc.
· Convenient for half-moon shaped die spool hole processing.
| Standard Price: | MYR 461.85- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Powder High Speed Spiral Tapered Reamer HSPTR
EIKOSHA
[Features]
· A finishing reamer for 1/5 to 1/10 taper.
| Standard Price: | MYR 1,193.46- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

KYOWA SEIKO
Lineup of bits for small diameter hole finish machining from φ0.5 to φ2.03 in 0.01 increments.
| Standard Price: | MYR 251.54 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Carbide Reamer with End Blade Edge KHR-4
KYOWA SEIKO
[Applications]It can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, aluminum, titanium, copper, and resin. [Features]Fine particle alloy K10 with well-balanced hardness and transverse rupture strength is used.
| Standard Price: | MYR 436.64- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Reamer with End Blade Edge KHRA-4
KYOWA SEIKO
[Applications]It can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, aluminum, titanium, copper, and resin. [Features]There are 3 blade shapes: spiral, helical, and broach.
| Standard Price: | MYR 501.21- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 45°
| Standard Price: | MYR 326.88- |
|---|---|
| Days to Ship: | 14 Day(s) |

CoroReamer 835 Multi-Edged Design For Cylindrical Holes, Spiral Flute, For Through Holes
SANDVIK
Ultra-high-speed, high-efficiency reamer
30 times feed of HSS reamer is possible (⌀10, for low carbon steel)
[Features]
·Chatter reduction
·Tip Chamfer 60°
·Diameter range: ⌀3.97-20mm (Available in units of ⌀0.01 for tailor made)
·Material Type: GC1024 TiAlN coating
· Coolant Through
| Standard Price: | MYR 1,457.40- |
|---|---|
| Days to Ship: | 10 Day(s) |

Spool Reamer with Rounding 3-Flute SUR3-R
EIKOSHA
[Features]
· 3-flute HSS type.
· For mold spool hole drilling.
· The tip is rounded.
| Standard Price: | MYR 772.56 |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Spool Reamer with Rounding 3-Flute Spiral SP-SUR3-R
EIKOSHA
[Features]
· 3-flute HSS type.
· For mold spool hole drilling.
· A spiral blade.
· The tip is rounded.
| Standard Price: | MYR 874.21 |
|---|---|
| Days to Ship: | 8 Day(s) or more |

DAIICHITOOL
[Features]
· Chips are discharged toward the back instead of being accumulated at the bottom.
· The depth is freely controlled by adjusting the shank.
| Standard Price: | MYR 629.59- |
|---|---|
| Days to Ship: | 11 Day(s) or more |

DAIICHITOOL
Tool Material: Carbide
Flute shape: Spiral/helical/broach
Work material: General steel / stainless steel / cast iron / aluminum / copper
Work material details: Steel alloy,
Groove shape: Spiral
Shank type: Straight shank
| Standard Price: | MYR 252.82- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

DAIICHITOOL
[Features]
· Chips are discharged toward the back instead of being accumulated at the bottom.
· The depth is freely controlled by adjusting the shank.
| Standard Price: | MYR 396.98- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

DAIICHITOOL
[Features]
·The material is HSS.
Tool Material: High-speed steel
Flute shape: Straight
Work material: General steel / stainless steel / cast iron / aluminum / copper
Work material details: Steel alloy, compatible
Shank type: Straight shank
| Standard Price: | MYR 291.94- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

DAIICHITOOL
[Features]
·Tip shape: 45 or less pointed center
Tool Material: High-speed steel
Flute shape: Taper
Work material: general steel / cast iron / aluminum / copper
Shank type: Straight shank
| Standard Price: | MYR 134.98- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

EIKOSHA
[Features]
· TiN coating improves durability.
· Abundant range of sizes in 0.005 mm increments.
| Standard Price: | MYR 115.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

OKAZAKI SEIKO
[Features]
・ For hole finishing machining of cast iron and general steel
・ MCO material (cobalt HSS) is used
| Standard Price: | MYR 182.08- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
・ Capable of deep hole machining thanks to a neck diameter thinner than the blade diameter
| Standard Price: | MYR 200.45- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Reamer with End Blade CERFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
・ Reamer for complete blind holes, capable of cleanly machining bottom surfaces.
・ Adopts an end mill shank
| Standard Price: | MYR 721.60- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]
・ OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.
・Can be used to machine high-hardness materials of up to HRC62.
| Standard Price: | MYR 322.46- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Powerful Reamer CPRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 45°
| Standard Price: | MYR 405.38- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・ The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 35°
| Standard Price: | MYR 208.46- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
| Standard Price: | MYR 234.75- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Reamer E Series with Oil Hole CE-H
FPTOOLS
[Features]
· Center through type oil hole is used. Improves scrap discharging and enables more stable machining in complete blind hole machining.
· Durability is improved by the new high rigidity blade shape.
· A short type with improved tool rigidity.
· By directly supplying cutting oil to the bottom of the hole through the center-through shape, smooth discharging of scrap is promoted and the influence of heat during machining is suppressed.
| Standard Price: | MYR 495.95- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

TRUSCO NAKAYAMA
[Features]
· A general-purpose reamer that can be used in the same way as a hand reamer.
Supports high-speed rotation unlike a high-speed steel hand reamer, is highly durable, and can be used for difficult-to-cut materials.
Can also be used at a higher cutting speed and feed rate.
Allows rough surfaces within holes to be given a clean finish.
Also enables the machining of workpieces with a hardness of HRC 50 to 60.
Offers excellent durability.
| Standard Price: | MYR 278.31- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Reamer For Automatic Lathes CNCR-C
EIKOSHA
[Features]
·Short type suitable for precision automatic lathe machining
Flute shape: Spiral/helical/broach
Work material: General steel / heat-treated steel / stainless steel / cast iron / aluminum / copper / graphite / resin
With or without coating / surface treatment: uncoated
Cutting diameter tolerance (mm): 0 to +0.005
Helix angle (°): 7°
Shank diameter tolerance: h7
Work material details: Steel alloy, compliant / die steel, compliant
Groove shape: Spiral
Shank type: End mill shank
| Standard Price: | MYR 268.95- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

High-Speed-Steel Reamer For Automatic Lathes NCR-C
EIKOSHA
Reamer for automatic lathes that widens holes while rotating workpiece when cutting various work materials such as stainless steel, cast iron, and aluminum.
| Standard Price: | MYR 275.71- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | NIKKENKOSAKU | NIKKENKOSAKU | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | SANDVIK | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | OKAZAKI SEIKO | SANDVIK | EIKOSHA | EIKOSHA | DAIICHITOOL | DAIICHITOOL | DAIICHITOOL | DAIICHITOOL | DAIICHITOOL | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | FPTOOLS | TRUSCO NAKAYAMA | EIKOSHA | EIKOSHA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Carbide Radical Mini Reamer for Bottom Hollow Applications (DLC Coating) | CoroReamer 835 Multi-Edged Design For Cylindrical Holes, Spiral Flute, For Through Holes | |||||||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 14 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 13 Day(s) or more | 13 Day(s) or more | 14 Day(s) | 13 Day(s) or more | 13 Day(s) or more | 14 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more |
| Tool Diameter(mm) | 3.97 ~ 20 | 3.97 ~ 30 | 1 ~ 30 | 3 ~ 30 | 10 | 4 ~ 13.99 | 12 | 3 ~ 10 | 1 ~ 10 | 5 ~ 40 | 4 ~ 41767 | - | 3 ~ 20 | 3 ~ 14 | 8 ~ 30 | - | 3 ~ 20 | - | - | 2.03 | 1 ~ 6.03 | 1 ~ 6.03 | 2.95 ~ 12.05 | - | 4.69 ~ 6.43 | 4.69 ~ 6.43 | 3 ~ 13 | 0.3 ~ 8.05 | 3 ~ 13 | 1 ~ 20 | - | 3.035 ~ 14.1 | 1 ~ 2 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 2.95 ~ 12 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 2.98 ~ 10.05 | 1 ~ 5.6 | 0.97 ~ 12.05 | 0.97 ~ 12.05 |
| Groove Length(mm) | - | - | 10 ~ 110 | 55 ~ 160 | 55 | 55 ~ 115 | - | 30 ~ 35 | 20 ~ 40 | 68 ~ 220 | 24 ~ 60 | 25 ~ 150 | 35 ~ 60 | 24 ~ 60 | 40 ~ 75 | 40 ~ 55 | 35 ~ 60 | 60 ~ 160 | 40 ~ 55 | - | - | - | 20 ~ 31 | - | 50 ~ 100 | 50 ~ 100 | 20 ~ 30 | 8 ~ 30 | 20 ~ 30 | 50 ~ 250 | 63 ~ 234 | 40 ~ 85 | 30 | 26 ~ 31 | 26 ~ 31 | - | 26 ~ 31 | 30 | 27 ~ 30 | 12 ~ 30 | - | 12 ~ 30 | 12 ~ 30 |
| work material | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] |
| Shank Type | - | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | Taper shank | Taper shank | End Mill Shank | straight shank | straight shank | Taper shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | - | End Mill Shank / straight shank | End Mill Shank | End Mill Shank |
| Coating Y/N | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | - | - | - | - | - | Available | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA |
| Groove Shape | - | - | Straight | Straight | Straight | Straight | Spiral | Spiral | Helical | Spiral | Helical | Spiral | Straight | Helical | Helical | Spiral | Straight | Straight | Spiral | Spiral | Spiral | Spiral | Helical | Spiral | Straight | Spiral | Spiral | Spiral | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Spiral | Spiral | Spiral | Straight | Spiral | Straight | Spiral | Spiral |
| Base Blade Y/N | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | - | Available | Available | NA | NA | - | - | - | - | - | - | - | NA | NA | NA | Available | NA | NA | NA | NA | NA | - | - | - |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ~ 5 | - | - | - | - | - | - | 1.5 | 1.5 | - | - | - | - | 2.9 ~ 15.84 | - | - | - | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | 1.43 ~ 15.3 | - | - | - | 12.2 ~ 30.2 | - | 2.04 ~ 32.99 | 12.2 ~ 30.2 | - | - | - | - | - | 4.69 ~ 6.43 | 4.69 ~ 6.43 | - | - | - | - | 4.16 ~ 20.52 | - | - | - | - | - | - | - | - | - | - | - | - |
| radius R | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - | - | - | 1゚ ~ 5゚ | - | - | - | 1/5T ~ 1/10T | - | 1゚ ~ 10゚ | 1/5T ~ 1/10T | - | - | - | - | - | 2° | 2° | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy