(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screw-Hole-Related Tools（Hole type：For blind hole）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
Hand Taps_HT【1-146 Pieces Per Package】
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Standard Price: MYR 39.97- Days to Ship: 1 Day(s) or more -
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Standard Price: MYR 88.10- Days to Ship: 5 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: MYR 94.73- Days to Ship: 5 Day(s) or more -
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
·General-purpose uncoated type high-speed steel hand tap
·High versatility, suitable for a variety of applications and work materials such as aluminum and general steel- Volume Discount
Standard Price: MYR 146.45- Days to Ship: 2 Day(s) or more -
MISUMI
[Features]
·Carbide uncoated type hand tap
·Can be used for both blind holes and through holes
·Suitable for mass production tapping of various cast iron- Volume Discount
Standard Price: MYR 148.43- Days to Ship: 4 Day(s) or more -
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Standard Price: MYR 95.83- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 55.48 Days to Ship: 1 Day(s) -
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Standard Price: MYR 103.29- Days to Ship: 5 Day(s) or more -
TS Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
··Carbide thread mill cutter capable of high-speed stable machining
·Can be used for both blind holes and through holes
·
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
Standard Price: MYR 1,152.45- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Carbide uncoated spiral flute tap
·Can be used for blind hole machining
·Suitable for mass production tapping of aluminum alloys and copper alloys- Volume Discount
Standard Price: MYR 148.43- Days to Ship: 4 Day(s) or more -
Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Standard Price: MYR 112.18- Days to Ship: 5 Day(s) or more -
Roll Taps for Miniature Threads_MS+RS
YAMAWA MFG
[Features]
Improved tool rigidity, torsional strength and tap runout accuracy by adopting a new blank shape!
· Markings that may hinder the roundness of the shank are moved to the shank square.
· Improved precision of machined female thread by adopting new thread precision "GS grade"!Standard Price: MYR 326.59- Days to Ship: 8 Day(s) -
Hand Taps for Parallel Pipe Threads_Rp
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Standard Price: MYR 123.85- Days to Ship: 9 Day(s) -
Hand Taps for General Purpose_IHT
YAMAWA MFG
[Features]
· Hand turned thread cutting tap for both through-holes and blind holes.
· Use for machining iron products (SPC, SS400, etc.) that are commonly available.
· Has a surface treatment (oxide treated) that is ideal for machining iron.
· Machines small amounts of female threads for product prototypes.Standard Price: MYR 39.14- Days to Ship: 9 Day(s) -
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]
· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).Standard Price: MYR 67.37- Days to Ship: 8 Day(s) or more -
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Standard Price: MYR 30.20- Days to Ship: 1 Day(s) or more -
Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.
Standard Price: MYR 197.36- Days to Ship: 7 Day(s) or more -
OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatibleStandard Price: MYR 48.84- Days to Ship: 5 Day(s) or more -
Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Standard Price: MYR 95.58- Days to Ship: 5 Day(s) or more -
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.Standard Price: MYR 113.92- Days to Ship: 5 Day(s) or more -
Hand Taps for American Taper Pipe Threads_NPT
YAMAWA MFG
Tap for machining American taper pipe "NPT" female threads.
[Features]
· The groove is a straight hand tap type. Comes with three biting teeth at the tip.
· General-purpose tap for general steel materials.
[Applications]
· To be used when machining American tapered pipe thread for pipes "NPT" female thread.
* American standard pipe threads, available in many types, can be complicated.
* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".Standard Price: MYR 251.80- Days to Ship: 8 Day(s) or more -
Hand Taps for Stainless Steels_SU-HT【1-89 Pieces Per Package】
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.Standard Price: MYR 46.19- Days to Ship: 7 Day(s) or more -
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.
Days to Ship: 5 Day(s) or more -
High Performance Roll Taps, Coated_HP+RZ【1-108 Pieces Per Package】
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
Standard Price: MYR 101.05- Days to Ship: 6 Day(s) or more -
Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: MYR 53.46- Days to Ship: 5 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.
Work material: High hardness steel to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3Standard Price: MYR 491.62- Days to Ship: 5 Day(s) or more -
Spiral Tap for General Application_EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Standard Price: MYR 46.96- Days to Ship: 2 Day(s) or more -
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Standard Price: MYR 62.48- Days to Ship: 5 Day(s) or more -
UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: MYR 201.44- Days to Ship: 5 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: MYR 118.87- Days to Ship: 5 Day(s) or more -
Hand Tap Set (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]
· Can be used for both through holes and blind holes.
· It is a high-speed steel (HSS-E) tap set.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.Standard Price: MYR 120.44- Days to Ship: 5 Day(s) or more -
Hand Taps for American Parallel Pipe Threads_NPS
YAMAWA MFG
■ The NPS tap is a hand tap for American parallelpipe threads and is used for products whosemain purpose is the tightness of the threadedpart in connecting pipe parts and the like.
Standard Price: MYR 305.03- Days to Ship: 8 Day(s) or more -
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
Standard Price: MYR 133.55- Days to Ship: 5 Day(s) or more -
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).Standard Price: MYR 38.73- Days to Ship: 5 Day(s) or more -
Hand Taps for Taper Pipe Threads Short (ℓg) Type_S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 149.27- Days to Ship: 7 Day(s) or more -
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Standard Price: MYR 153.44- Days to Ship: 8 Day(s) or more -
DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model
MISUMI
[Features]
·Carbide thread mill cutter capable of high-speed stable machining
·Can be used for both blind holes and through holes
·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for Non steel metals such as Aluminum and Copper- Volume Discount
Standard Price: MYR 639.86- Days to Ship: 4 Day(s) or more -
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
Standard Price: MYR 55.93 Days to Ship: 5 Day(s) or more -
Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.
Tool Material: Vanadium high-speed steel
Work material: general steel / cast iron / aluminum / copperStandard Price: MYR 162.21- Days to Ship: 5 Day(s) or more -
Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT
OSG
Excellent for hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC to 60 HRC or higher
Standard Price: MYR 1,244.24- Days to Ship: 5 Day(s) or more -
Tapered Tap for Pipes, For Stainless Steel Use EX-SUS-TPT
OSG
It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
Standard Price: MYR 142.51- Days to Ship: 5 Day(s) or more -
Spiral Parallel Pipe Thread Tap for Stainless Steels_SUS-SFT-SPT
OSG
[Specifications]
· Shape: Pipe tap
· Screw type: pipe parallel
· Coating: Non-Coated
· Work Material: Stainless Steel (SUS) [◎] / Copper (Cu) [○]Standard Price: MYR 123.37- Days to Ship: 5 Day(s) or more -
Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Standard Price: MYR 144.04- Days to Ship: 5 Day(s) or more -
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Standard Price: MYR 79.65 Days to Ship: 5 Day(s) or more -
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Standard Price: MYR 115.10 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | OSG | OSG | MISUMI | MISUMI | OSG | HOZAN | OSG | MISUMI | MISUMI | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | MISUMI | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | TS Coated Carbide Threading Cutter, for Internal Metric Threads | Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT | Hand Taps for Stainless Steels_SU-HT【1-89 Pieces Per Package】 | High Performance Roll Taps, Coated_HP+RZ【1-108 Pieces Per Package】 | Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】 | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT | Spiral Parallel Pipe Thread Tap for Stainless Steels_SUS-SFT-SPT | Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 1 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 1 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Screw size (Nominal) | No.0 ～ M48 | M2 ～ M36 | No.2UN ～ M12 | M3 ～ M10 | M3 ～ M10 | No.10UNF ～ M56 | - | No.0UN ～ M20 | M6 ～ M12 | M3 ～ M10 | R1 ～ R7/8 | S0.6 ～ S0.9 | 1'-11 ～ 3/4-14 | M3 ～ M10 | M1.4 ～ M16 | M2 ～ M24 | M3 ～ M12 | No.4UN ～ M35 | G1 ～ G7/8 | M1 ～ M45 | 1'-11.5 ～ 3/8-18 | 1/2-20UNF ～ M30 | M1 ～ M6 | No.10-32UNF ～ M20 | M1 ～ M30 | M3 ～ M12 | No.10UN ～ M56 | M1.4 ～ M48 | S0.5 ～ S0.9 | No.2UN ～ M6 | M3 ～ M16 | 1'-11.5 ～ 3/8-18 | M1 ～ M6 | M1.4 ～ M6 | 1'-11 ～ 3/8-19 | 1'-11 ～ 7/8-14 | M3 ～ M16 | M6 | 3/8UN ～ M12 | R1/2 ～ R3/8 | R1 ～ R3/8 | G1 ～ G3/8 | M3 ～ M12 | M4 | M3 |
| Screw Types | Meter / unified / Sewing Machine | Meter | Meter / unified | Meter | Meter | Meter / unified | Meter | Meter / unified | Meter | Meter | Taper for Pipe | Miniature | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter / unified / Sewing Machine | Parallel for Pipes | Meter | Taper for Pipe | Meter / unified / Whitworth | Meter | Meter / unified | Meter | Meter | Meter / unified | Meter | Miniature | Meter / unified | Meter | Parallel for Pipes | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter | Meter | Meter / unified | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 100 | 0.4 ～ 4 | 0.25 ～ 56 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.25 ～ 32 | - | 0.25 ～ 80 | 1 ～ 1.75 | 0.5 ～ 1.5 | 11 ～ 28 | 0.15 ～ 0.225 | - | 0.5 ～ 1.5 | 0.3 ～ 2 | 0.4 ～ 3 | 0.5 ～ 1.75 | 0.75 ～ 40 | 11 ～ 28 | 0.2 ～ 4.5 | - | 0.4 ～ 3.5 | 0.25 ～ 1 | 0.25 ～ 1.75 | 0.25 ～ 3.5 | 0.5 ～ 1.75 | 0.25 ～ 48 | 0.3 ～ 5 | .02 ～ 0.225 | 0.25 ～ 56 | 0.5 ～ 2 | - | 0.2 ～ 1 | 0.3 ～ 1 | - | - | 0.5 ～ 2 | 1 | 1.25 ～ 16 | 14 ～ 28 | 11 ～ 28 | 11 ～ 28 | 0.5 ～ 1.75 | 0.7 | 0.5 |
| Tool Material Type | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| Tap Type | Hand Tap | Spiral Tap | Roll tap | Hand Tap | Hand Tap | Spiral Tap | Tap wrench | Roll tap | Thread cutter | Spiral Tap | Tap for pipes | Roll tap | Tap for pipes | Hand Tap | Hand Tap | Spiral Tap | Hand Tap | Hand Tap | Tap for pipes | Roll tap | Tap for pipes | Hand Tap | Roll tap | Roll tap | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Roll tap | Roll tap | Hand Tap | Tap for pipes | Roll tap | Spiral Tap | Tap for pipes | Tap for pipes | Thread cutter | Spiral Tap | Hand Tap | Tap for pipes | Tap for pipes | Spiral Tap | Roll tap | Roll tap | Roll tap |
| Hole type | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P | 2P ～ 4P | 1.5P ～ 9P | 1.5P ～ 3P | 1.5P ～ 2.5P | - | 2P ～ 4P | - | 1.5P ～ 2.5P | 2.5P | 2P | 3.5P | 2P ～ 5P | 1.5P ～ 5P | 2.5P | 2.5P ～ 5P | 1.5P ～ 9P | 1.5P ～ 4P | 2P ～ 4P | 3P | 1.5P ～ 4P | 2P ～ 4P | 2P ～ 4P | 1.5P ～ 5P | 2.5P ～ 5P | 2.5P ～ 3P | 3P | 2P | 1P | - | 5P | 1P | 2.5P | 2.5P | 2.5P | - | 2.5P | 1.5P ～ 5P | 3P | 2.5P | 2.5P | 2P ～ 4P | 2P | 2P |
| Coating Type | - | Non-Coated | TiCN | Non-Coated | Non-Coated | Other | - | TiN | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | - | - | Other | Nitriding Treatment | Non-Coated | TiCN | Non-Coated | Non-Coated | TiCN | - | - | TiN | TiCN | - | TiCN | Non-Coated | Non-Coated | CrN | TiCN | Non-Coated | - | TiCN | - | - | - | DLC | Non-Coated | Non-Coated | TiCN | Non-Coated | Non-Coated | TiN | Non-Coated | TiCN |
| Coating Y/N | NA | NA | Available | NA | NA | Available | NA | Available | Available | NA | NA | NA | NA | Available | Available | NA | Available | NA | NA | Available | NA | NA | Available | Available | NA | Available | NA | NA | Available | Available | NA | NA | Available | NA | NA | NA | Available | NA | NA | Available | NA | NA | Available | NA | Available |
| Overall Length (L)(mm) | 32 ～ 185 | 80 ～ 300 | 30 ～ 82 | 46 ～ 75 | 46 ～ 75 | 34 ～ 250 | 80 | 30 ～ 105 | 54 ～ 74 | 46 ～ 75 | 55 ～ 170 | 36 | 59 ～ 140 | 46 ～ 75 | 36 ～ 95 | 40 ～ 120 | 46 ～ 82 | 44 ～ 115 | 55 ～ 170 | 30 ～ 220 | 54 ～ 155 | 42 ～ 135 | 36 ～ 62 | 36 ～ 105 | 36 ～ 135 | 46 ～ 82 | 30 ～ 205 | 34 ～ 185 | 30 | 30 ～ 62 | 46 ～ 95 | 54 ～ 120 | 36 ～ 62 | 36 ～ 62 | 55 ～ 155 | 55 ～ 170 | 57 ～ 92 | 62 | 150 | 59 ～ 87 | 55 ～ 95 | 55 ～ 95 | 80 ～ 150 | 52 | 46 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- 0.9
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PF 1
- PS 1
- PT1
- PT 1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11.5
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PS 1 1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1'1/2-11.5
- 1'1/2-11
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PS 1 1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1'1/4-11.5
- 1'1/4-11
- 1 1/4-8UN
- 1 1/8
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1'1/8-11
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PS 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1'3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4-18
- 1/4W20
- 1 5/8
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1 7/16
- 1 8
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PS1/8
- PS 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8-27
- 1/8-18
- 1 9/16
- M1 to 10
- 1'11.5
- 1 12
- 1 14
- 1/16
- G1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16-27
- 1 20
- M1.1
- M1.2
- S1.2
- 1.25
- 1.29
- 1.37
- M1.4
- S1.4
- 1.45
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- PT 2
- R2
- Rp2
- W2
- 2'-11.5
- 2'-11
- 2-8UN
- 2 1/2
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2'1/2-11
- 2'1/2-8
- W2"1/4
- 2'1/4-11
- 2 4.5
- M2 to 4.5
- 2 12
- M2.2
- M2.3
- M2.5
- M2.6
- 3
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- STI M3
- 3'-11
- 3'-8
- 3 1/2
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3'1/2-11
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- PS 3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-18
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- 3/32
- SM3/32
- 3.5
- M3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- STI M4
- 4'-11
- M4 to 6
- M4 to 13
- M4.5
- M4.5
- 5
- 5M
- M5
- M5.0
- STI M5
- 5/1
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-14
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16W
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32
- W5/32
- 5/64
- M5.5
- M5.5
- 6
- M6
- M6.0
- STI M6
- No6-40UNF
- M6 to 20
- M7
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32
- SM7/32
- 7.5
- 8
- M8
- STI M8
- 9
- M9
- M9
- PG9
- 9/16
- 9/16UN
- UNF9/16
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- 10
- M10
- M10.0
- STI M10
- Tr 10
- M10 to 13
- M10 to 25
- 11
- M11
- M11
- PG11
- 11/16
- SM11/32
- 11/64
- SM11/64
- 12
- M12
- M12.0
- STI M12
- Tr 12
- 13
- M13
- PG13.5
- M14
- M14.0
- M14
- Tr 14
- 15
- M15
- 15/64
- SM15/64
- 16
- M16
- M16.0
- M16
- PG16
- Tr 16
- 17
- M17
- M18
- M18
- Tr 18
- 19
- M19
- M19 to 32
- M19 to 38
- 20
- M20
- M20
- Tr 20
- M21
- PG21
- 22
- M22
- M22
- M22X
- Tr 22
- M23
- M24
- M24
- M24X
- Tr 24
- 25
- M25
- M25X
- Tr 25
- M25 to 50
- M25 to 70
- M26
- Tr 26
- M27
- 28
- M28
- Tr 28
- PG29
- M30
- Tr 30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- PG36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 26
- 27
- 28
- 30
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 100
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- YAMAWA MFG (122)
- OSG (105)
- DOY FURNITURE (5)
- HOZAN (4)
- NACHI (4)
- GUHRING (3)
- SANDVIK (3)
- TRUSCO NAKAYAMA (3)
- RUKO (2)
- ISHIHASHI (1)
- NS TOOL (1)
- H & H (0)
- KO-KEN TOOL (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- NIIGATASEIKI (0)
- TSUBOSAN (0)
- TANOI MFG (0)
- TOP (0)
- ONISHI (0)
- ENGINEER (0)
- UNION TOOL (0)
- SKC (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- ESCO (0)
- LIGHTSEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy