(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Search Results “Misumi Economy”
Brand
Category
2 items
Loading...
Product
-
- Economy
Idlers, Backside Belt Tensioning
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 40.88- Days to Ship: 7 Day(s) -
Small Diameter, Ball Bearing, Open Type
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- CAD ：
- 3D
Standard Price: MYR 5.09- Days to Ship: 6 Day(s) or more -
Small Caster Medium/Heavy Load Swivel Type with Bearing
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
Standard Price: MYR 40.16- Days to Ship: 6 Day(s) -
Angular Contact Bearing, Thin Wall, Single-Row Universal Combination Type
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 88.96- Days to Ship: 13 Day(s) -
- Economy
Flat Belt Conveyor, Center Drive, Pulley Dia. 30mm, Short Body
MISUMI
Economy series Belt Conveyor
- CAD ：
- 3D
Days to Ship: 18 Day(s) -
- Economy
Days to Ship: 17 Day(s) -
Heat Shrink Tubes Shrinkage4:1 Thick Wall, Adhesive Lined
MISUMI
This is an economy item, The price is cheaper than the MISUMI standard product.
[Features]
Polyolefin shrink tube + hot glue
Shrinkage ratio 4:1
Operating temperature range -55°C to 125°C
Waterproof properties
Flame retardant outer layer, self-extinguishing in 1 minute.- Volume Discount
- RoHS
Standard Price: MYR 139.24- Days to Ship: 1 Day(s) or more -
Rack Gears-L Fixed/Economy Type/Both Ends Machined Type, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 19.14- Days to Ship: 6 Day(s) or more -
IO Control Harness for MISUMI Original Servo Motor Driver
MISUMI
IO Control Harness for MISUMI Original Servo Motor Driver "E-DHAS" and "E-DFAS"
- Volume Discount
Standard Price: MYR 43.58- Days to Ship: 6 Day(s) -
Linear Guides Wide Long Blocks-HG Type (ROHS Compliant)
MISUMI
Linear Guides Wide Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 1980(3960)
● Assembly Height (mm.): 30, 36, 48, 60, 70 and 90
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.- Volume Discount
- RoHS
- CAD ：
- 3D
Days to Ship: 5 Day(s) or more -
![Tension Springs - Extra Light Load / Light Load Type [RoHS Compliant]](//content.misumi-ec.com/image/upload/t_search_view_a/t_misumi_wm/v1/p/jp/product/series/110311022039/110311022039_001_20240304195517.jpg?$search_view_a$)
Tension Springs - Extra Light Load / Light Load Type [RoHS Compliant]
MISUMI
＼RoHS10-compliant products are newly released. / The bulk-purchase may save up to 80% for MISUMI’s similar products.
MISUMI's low-priced new brand [Economy Series] Sequentially expanding product lineup. See "Product Lineup" for the special feature page. Product Lineup- Volume Discount
- CAD ：
- 3D
Standard Price: MYR 4.01- Days to Ship: 4 Day(s) or more -
Thread Insert (Box), Economy series【100 Pieces Per Package】
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Standard Price: MYR 113.52- Days to Ship: 6 Day(s) -
Hose fitting joint nipple, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 10.91- Days to Ship: 6 Day(s) or more -
Compact Ball Valves/Brass/PT Threaded/PT Tapped, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
- CAD ：
- 2D
Standard Price: MYR 35.64- Days to Ship: 6 Day(s) -
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
Standard Price: MYR 12.54- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,835.80- Days to Ship: 36 Day(s) -
Standard Price: MYR 676.36- Days to Ship: 6 Day(s) -
Days to Ship: 9 Day(s) -
MIKI PULLEY
Resin bellows employed in pursuit of flexible and low inertia.
[Features]
· Using resin boots absorbs vibration.
· Compact design with integrated hub and boot, with no backlash.
· Coupling with extremely small shaft reactive force owing to vibration absorption or installation error, suitable for stepping motor, encoder, etc.- CAD ：
- 2D
Standard Price: MYR 95.57- Days to Ship: 5 Day(s) or more -
K Super Torque Timing Pulley - S8M
KATAYAMA CHAIN
The KANA timing belt pulley achieves low noise and clean transmission due to the excellent performance of timing transmission. Use in combination with a timing belt.
- CAD ：
- 3D
Standard Price: MYR 112.99- Days to Ship: 8 Day(s) or more -
KATAYAMA CHAIN
The KANA timing belt pulley achieves low noise and clean transmission due to the excellent performance of timing transmission. Use in combination with a timing belt.
- CAD ：
- 3D
Standard Price: MYR 45.36- Days to Ship: 5 Day(s) or more -
KATAYAMA CHAIN
FBN finished sprocket has shaft hole tolerance H7, standard grade parallel keys that satisfy JIS standards, metric coarse machining, and hex socket head screws already inserted.
- CAD ：
- 3D
Standard Price: MYR 54.46- Days to Ship: 5 Day(s) or more -
KATAYAMA CHAIN
Rich lineup of variations in KANA standard sprocket count, number of teeth, and shape.
- CAD ：
- 3D
Standard Price: MYR 17.56- Days to Ship: 5 Day(s) or more -
XBW/XBWS Flexible Coupling - Disk Type
NABEYA BI-TECH
High torque, high torsional rigidity, and high responsiveness. Backlash "0"
- CAD ：
- 3D
Standard Price: MYR 256.25- Days to Ship: 5 Day(s) or more -
MOL Flexible Coupling - Oldham Type
NABEYA BI-TECH
High torque, small eccentric reaction force, large permissible misalignment large, with vibration absorption.
- CAD ：
- 3D
Standard Price: MYR 93.80- Days to Ship: 2 Day(s) or more -
MST/MSTS Flexible Coupling Slit Type
NABEYA BI-TECH
Backlash "0." Design of aluminum alloy slit pattern changed to improve performance.
[Features]
· Metal spring coupling with perfectly integrated structure, with slit in cylindrical material.
Leaf spring formed with a slit allows eccentricity, angle deviation, and end play.
· 2 kinds available: aluminum alloy / all stainless steel type.
· Wide range of outer diameters, ø8 to ø63- CAD ：
- 3D
Standard Price: MYR 127.39- Days to Ship: 5 Day(s) or more -
MSX Flexible Coupling - Slit Type
NABEYA BI-TECH
High torsional rigidity / highly responsive. Backlash "0"
- CAD ：
- 3D
Standard Price: MYR 152.29- Days to Ship: 5 Day(s) or more -
Timing Belt Pulley Tooth Pitch 2 mm, Belt Width 4 mm_2GT
NABEYA BI-TECH
Optimal for precision equipment. Can be used in 100W to 1000W motors.
[Features]
· Tooth pitch: 2 mm.
· BLP: Backlash-less pulley.
· 0 backlash per tooth.
· Low dust generating belt with special coating.
· Does not create rubber powder.
· Optimal for small precision equipment.
· Can be used in 50W to 200W motors.
· Customized items with different timing pulley teeth numbers and shapes, timing belt lengths etc. also manufactured.- CAD ：
- 3D
Standard Price: MYR 164.32- Days to Ship: 8 Day(s) or more -
Timing Pulley Tooth pitch 3 mm Belt width 9 mm3GT
NABEYA BI-TECH
[Features]
· Tooth pitch: 2 mm.
· BLP: Backlash-less pulley.
· 0 backlash per tooth.
· Optimal for small precision equipment.
· Can be used in 100W to 1000W motors.
· Customized items with different timing pulley teeth numbers and shapes, timing belt lengths etc. also manufactured.- CAD ：
- 3D
Standard Price: MYR 180.54- Days to Ship: 7 Day(s) or more -
IMAO
[Features]
· SUS The product is perfectly rustproof, ideal for food machinery and sanitary equipment.
· This is a flat shape which prevents clogging from dirt.
· Chrome plating is resistant to wear and rubbing, it is resistant to sea water/detergent acetone/ethyl alcohol/chlorine solution.
· It is also suitable for facilities requiring frequent cleaning and its good for outdoor use.Standard Price: MYR 12.90- Days to Ship: 4 Day(s) or more
![Tension Springs - Extra Light Load / Light Load Type [RoHS Compliant]](http://content.misumi-ec.com/image/upload/t_search_view_a/t_misumi_wm/v1/p/jp/product/series/110311022039/110311022039_001_20240304195517.jpg?$search_view_a$)
Loading...
Configure
Category
-
- Knob Screws (402)
- Flexible Shaft Couplings (223)
- Sprockets (196)
- Timing Pulleys, Idlers (166)
- Speed Controllers (149)
- Bearings with Housings (126)
- Casters (107)
- Roller Bearings (58)
- Bearings with Resin (54)
- Linear Bushings (48)
- Screw Fittings, Screw-In Type Flanges (39)
- Single Axis Robots (37)
- Ball Bearings (34)
- Vertical Hold-Down Toggle Clamps (33)
- Nuts (32)
- Flying Cam Units (29)
- Horizontal Hold-Down Toggle Clamps (28)
- Handles (27)
- Push-Pull Toggle Clamps (26)
- Standard Linear Guides (25)
- Belt Conveyors, Plastic Chain Conveyors (25)
- Linear Shafts (24)
- Foot Bases for Aluminum Extrusions (24)
- Timing Belt (22)
- Flat Hinges (21)
- Shaft Supports (19)
- Heat Insulating Plates (18)
- Telescopic Slide Rails (18)
- Adjuster Bolt (17)
- Single Axis Linear Motor Actuators (16)
- Oil Free Bushings (15)
- Contact Probes (15)
- 6 Series - Aluminum Frames 30, 50, 60, 100 Square (15)
- Bracket for 8mm Slot (30/40/50/60/80/100) Economy series Aluminum frame (15)
- Panel Mounts (15)
- Flat Type (15)
- Roller Chains (14)
- Angle Plates (14)
- Ball Screw (13)
- Standard Sheath Type (13)
- Support Units (12)
- Locating Pins (12)
- Cam Followers, Roller Followers (12)
- Stepping Motors (12)
- Heat Shrink Tubes (11)
- Indexing Plungers (11)
- Small AC Motors (11)
- Bushings for Fixtures (10)
- Posts (10)
- Catches (10)
- Cable Carriers (9)
- Lead Screw Clamps (9)
- Proximity Sensors (9)
- X-Axis (9)
- LED (9)
- Shaft Collars (8)
- Ball Plungers (8)
- Photoelectric Sensors (8)
- Rack Gears (8)
- Tension Springs (8)
- Post Stands (8)
- Lead Screws, Nuts (7)
- Rod Type Actuator (7)
- Fiber Sensors (Amplifiers) (7)
- Spur Gears (7)
- Ball Rollers (7)
- 5 Series - Aluminum Frames 20, 25, 40 Square (7)
- Aluminum Frames 4545,4590 (7)
- Digital Position Indicators (6)
- Stopper Bolts (6)
- Bearing Lock Nuts (6)
- Flat Belt Pulleys, Idlers (6)
- Rollers (6)
- Compression Springs (6)
- Round Wire Springs (6)
- Antivibration Materials (6)
- Machine Keys (6)
- Ball Valves (6)
- O-Rings (6)
- Sensor Rails, DIN Rails (5)
- Cartridge Heaters (5)
- Cantilever Shafts (5)
- AC Servo Motor (5)
- Keyless Bushing (Fastening Fittings) (5)
- Material Plates, Blocks (5)
- Tabbed Bracket for Economy series Aluminum frame (5)
- Slot Covers (5)
- Concealed(invisible) joint parts/frame with joints (5)
- Double Post Type (5)
- Rotation Handles, Crank Handles (5)
- Metal Washers, Collars (5)
- Hose Fittings (5)
- Hinge Pins (5)
- Ball-Lock Punches (5)
- Machinery Robot Cables (4)
- USB Adapters (4)
- LAN Adapters (4)
- Nuts for Lead Screws (4)
- Lead Screw Support Units (4)
- Linear Actuator (Steel body) (4)
- Spring Plungers (4)
- Rotary (4)
- Flat Belt (4)
- Flat Belt Pulleys (4)
- Conveyer Timing Belts (4)
- Frame Caps (4)
- Clamps, Holders, Hooks (4)
- Rod End Bearings, Spherical Bearings (4)
- Hex Screws (4)
- Hex Socket Head Cap Screws (4)
- Hex Socket Set Screws (4)
- Button Dies (4)
- LAN / Reduced Wiring Network Cable (3)
- Roller Plungers (3)
- Laser Sensor (3)
- Fiber Units (3)
- Photomicrosensors (3)
- Z-Axis (3)
- Goniometer (3)
- Manual XY-Axis Stages (3)
- Rotary (3)
- Round Belt Pulleys, Idlers (3)
- Pipe Rollers (3)
- Trims Edge (3)
- Urethane, Rubber, Sponge, Felt - Round Shape (3)
- Bolts (3)
- Adjuster Pads (3)
- Single Post Type (3)
- Retaining Rings (3)
- Fittings for Stainless Steel Pipes (3)
- Manifold Blocks (3)
- Space Saving Bolts (3)
- Screws with Captured Washer (3)
- Hex Socket Flat Head Cap Screws (3)
- Hex Nuts (3)
- Scrap Retention Button Dies (3)
- Urethane Springs (3)
- Electrode Wires (3)
- Belt Polishing Materials (3)
- Wheels with Shafts (3)
- Industrial Relays (2)
- Stack Lights (2)
- Hubs (2)
- Sensor Cables (2)
- Power Cables (2)
- Electrical Enclosure Cooling Fans (2)
- Noise Filters (2)
- Linear Guide Accessories (2)
- Cross Roller Tables (2)
- Ball Lock Pins, Slot Pins (2)
- Adjustment Screws (2)
- Adjusting Bolts (2)
- Clamping Screws (2)
- Manual X-Axis Stages (2)
- Z-Axis (2)
- XZ-Axis (2)
- Manual XYZ-Axis Stages (2)
- Goniometer (2)
- Temperature Controllers (2)
- Round Belts (2)
- Flat Belt Idlers (2)
- Posts for Tension Springs (2)
- Fixed Type (2)
- Adjustable (2)
- Ionizer (2)
- L-Shaped Angles (2)
- End Face Connectors (2)
- Casters (2)
- Handle (2)
- Hinges (2)
- Floating Joints (2)
- Hose Clamps (2)
- Pan Head Screws (2)
- Flat Head Machine Screws (2)
- Small Truss Screws (2)
- Hex Socket Button Head Cap Screws (2)
- Self Tapping Screws, Taptite High Tech Screws (2)
- Washers (2)
- Threaded Inserts (2)
- Pilot Punches With Locating Dowel Holes (2)
- Nest Guides (2)
- Radius End Mills (Carbide) (2)
- Grinding Stone Dressers (2)
- Sheet Polishing Materials (2)
- Relay Sockets (1)
- I/O Harnesses for Control Signals (1)
- Zip Tie Fixtures/Options (1)
- Aluminum/Plastic Boxes (with Hole Drilling Alternations) (1)
- Fans (Options, Others) (1)
- PC Power Supplies (1)
- Interface Terminal Blocks (Round/Y Terminal Types) (1)
- Interface Terminal Blocks (Rod Terminal Type) (1)
- Angled Pins (1)
- Spline Shaft (1)
- Cross Roller Guides (1)
- Simplified Slide Rails (1)
- Bushings for Inspection Jigs (1)
- Leveling Screws (1)
- Locating Units (1)
- Lens for Sensor (for Photoelectric Sensors and Fiber Sensors) (1)
- Peripheral Components (for Photomicrosensors) (1)
- XY-Axis (1)
- Micrometer Heads, Feed Screw (1)
- X-Axis (1)
- Bearing Shaft Screws (1)
- Gear Motors (1)
- Other Motor Related Components (1)
- Magnetic Transmission (1)
- Torsion Springs (1)
- Disc Springs (1)
- Other Shock Absorbers (1)
- Antivibration Mounts (1)
- Transparent Plastic Plates, Plastic Cover Panels (1)
- Aluminum Frames (1)
- 90 degree Brackets (1)
- Hinges (1)
- Catches and Locks (1)
- Door Sliders (1)
- Others (1)
- Door Slider (1)
- Safety Mesh Fence Units (1)
- Gussets (1)
- Leveling Mount Related Components (1)
- Shim Tapes (1)
- Shim Rings (1)
- Other Manifolds (1)
- Ducts Hose Fittings (1)
- Links (1)
- Hinge Bases, Hinge Plates, Hinge Bolt (1)
- Wing Hinge Screws (1)
- Cover Screws (1)
- Lock Nuts (1)
- Domed (Acorn) Nuts (1)
- Screw Plugs (1)
- Anchors (1)
- Hydraulic Hose Adaptors (1)
- Air Nozzles (1)
- Ball-Lock Button Dies (1)
- Pre-Holding Pins (1)
- Limit Unit (1)
- Square End Mills (Carbide) (1)
- Multi-Function Square End Mills (Carbide) (1)
- Round Bar Electrodes (1)
- Grinding Stones with Shafts (1)
- DIA/CBN Bars (1)
- Polishing Materials / Pastes (1)
- Hook (1)
Lead Time / Manufacturer / CAD Data Type
-
Days to Ship
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
-
Brand
- MISUMI (1939)
- KATAYAMA CHAIN (163)
- KONISHI (90)
- NABEYA BI-TECH (87)
- IMAO (72)
- SMC (58)
- ESCO (48)
- DAIMARU_BYORA (30)
- MITSUBOSHI_BELT (28)
- SUNGIL (27)
- PISCO (19)
- LINK (18)
- MITSUBOSHI CI (18)
- CHIYODA (17)
- NTN (17)
- TOK BEARING (16)
- CKD (14)
- KOGANEI (14)
- SANKOSEISAKUSHO (13)
- FESTO (13)
- MIKI PULLEY (12)
- ADVANCED (11)
- SAKAI (11)
- YUKIGIKEN (11)
- TAKIGEN (10)
- UNITTA (10)
- IKO (9)
- INA (9)
- SCHCOUPLING (9)
- JTEKT KOYO (8)
- NIHON MINIATURE (8)
- KAYSEVEN (7)
- TRUSCO NAKAYAMA (7)
- EASTERN SEIKO (6)
- NSK (6)
- GOSHO WORKS (5)
- MIGHTY (5)
- NITTA (5)
- THREE HIGH (5)
- NIC AUTOTEC (4)
- OMRON (4)
- MIYOSHI KIKAI (3)
- OZAK (3)
- RICHENGINEERING (3)
- ISEL (2)
- KONOE (2)
- NACHI (2)
- ORIENTAL MOTOR (2)
- YAMATO_CO_LTD (2)
- CAP (1)
- HILOGIK (1)
- JPF (1)
- KOYO ELECTRONIC (1)
- KYOUIKU (1)
- LYNXEYEMOTION (1)
- MINITOR (1)
- NIHON SEIKI (1)
- NITOMS (1)
- SUNCO (1)
- TAIYO (1)
- NSB (1)
- YAHATA (1)
- SHIMIZU (1)
-
CAD
- 2D
- 3D
Loading...
Full Text Search
Loading...
Technical Information
Loading...
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy