(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Drill Bits（With/without Oil Hole：NA Page3）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
OSG
[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chipsStandard Price: MYR 257.82- Days to Ship: 5 Day(s) or more -
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
[Features]
·By providing a margin with burnishing flute on the outer periphery, it is possible to perform hole drilling and hole finishing at the same time
·Supports a wide range of work materials from general steel to stainless steel
·Internal lubrication supply efficiently discharges cutting chip and improves tool lifespan (TAC－HBNESDR)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 246.09- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
- Volume Discount
Standard Price: MYR 236.16- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.
- Volume Discount
Standard Price: MYR 222.16- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance- Volume Discount
Standard Price: MYR 167.02- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
MISUMI
[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance- Volume Discount
Standard Price: MYR 196.20- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance- Volume Discount
Standard Price: MYR 151.31- Days to Ship: 2 Day(s) or more -
TiAlN Coated Carbide Drill, Stub
MISUMI
[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 110.18- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
MISUMI
[Features]
·Versatile carbide drill for a wide range of applications
·TiAlN coating enables high-speed cutting
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 89.42- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
·Versatile carbide drill for a wide range of applications
·TiAlN coating enables high-speed cutting
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 95.72- Days to Ship: 4 Day(s) or more -
Carbide Drill, Straight Shank / Regular
MISUMI
[Features]
·Versatile uncoated carbide drill for a wide range of applications
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 60.47- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
MISUMI
[Features]
·MISUMI original shape ideal for SUS430 machining.
·Designed with helix angle of 38° near the tip and 20° near the shank
·The 20° section has large core diameter for improved tool durability
·Superfine cemented carbide alloy provides excellent abrasion resistance and enables high-speed machining
·125° tip angle and combined helix angle improve cutting performance- Volume Discount
Standard Price: MYR 454.83- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Drill for Aluminum Machining, Regular
MISUMI
[Features]
·DLC coating with excellent abrasion resistance and chip-weld resistance makes it ideal for machining non-ferrous metals such as aluminum and copper
·Demonstrates excellent chip removal capability and sharpness due to the high helix shape
·Lineup of sizes that are effective for drilling pilot holes for plastic processing with forming taps difficult to control precision
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 435.70- Days to Ship: 4 Day(s) or more -
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
MISUMI
[Features]
·Due to its special shape, it exhibits excellent cutting performance even for non-ferrous metals such as gray cast iron, ductile cast iron, aluminum alloys, brass, and magnesium
·Drilling is possible without centering due to the spiral point shape of the tip chisel part
·Wide groove width design promotes cutting chip discharge- Volume Discount
Standard Price: MYR 283.86- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
MISUMI
[Features]
·Outstanding chip discharge and sharpness are demonstrated by high helix shape
·Designed for frequent pre-drilling of M4 to M12 metric coarse pilot hole
·2 types of step angles are available for chamfering and cutting
·Reduces chamfering process and achieves high-efficiency drilling. (DLC－SC－SDR)
·Relief holes can be processed at same time when drilling pilot holes for bolts (DLC－SF－SDR)- Volume Discount
Standard Price: MYR 461.92- Days to Ship: 4 Day(s) or more -
TiN Coated High-Speed Steel Drill, End Mill Shank / Stub
MISUMI
[Features]
・Highly versatile drill that can handle everything from general steel to non-ferrous metals, cast iron, and stainless steel
・Improved thinning and helix angle reduce torque and achieve high precision machining
・Special groove shape allows hard and long chips to be ejected without clogging- Volume Discount
Standard Price: MYR 52.89- Days to Ship: 4 Day(s) or more -
TiN Coated High-Speed Steel Drill, End Mill Shank / Regular
MISUMI
[Features]
・Highly versatile drill that can handle everything from general steel to non-ferrous metals, cast iron, and stainless steel
・Improved thinning and helix angle reduce torque and achieve high precision machining
・Special groove shape allows hard and long chips to be ejected without clogging- Volume Discount
Standard Price: MYR 51.64- Days to Ship: 4 Day(s) or more -
TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】
MISUMI
Carefully selected frequently used 48 sizes are assorted at low prices
- Volume Discount
Standard Price: MYR 91.83- Days to Ship: 4 Day(s) or more -
High-Speed Steel Drill, Straight Shank / Long
MISUMI
[Features]
·Lineup of frequently used sizes
·Straight shank long drill type that can handle deep hole drilling- Volume Discount
Standard Price: MYR 46.36- Days to Ship: 4 Day(s) or more -
High-Speed Steel Drill, Tapered Shank / Regular
MISUMI
Only the most popular sizes have been carefully selected at affordable prices
- Volume Discount
Standard Price: MYR 110.44- Days to Ship: 4 Day(s) or more -
High-Speed Steel Drill, Tapered Shank / Regular Model
MISUMI
General purpose tapered shank drills that facilitate machining are available in rich lineups of 71 sizes
- Volume Discount
Standard Price: MYR 144.21- Days to Ship: 4 Day(s) or more -
High-Speed Steel Drill, Tapered Shank / Long
MISUMI
[Features]
·Lineup of frequently used sizes
·Tapered shank shape high-speed steel steam oxide treatment type that can handle large diameter deep hole drilling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 387.83- Days to Ship: 4 Day(s) or more -
TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub
MISUMI
· A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel
· MISUMI's unique thinning enables excellent center bitingStandard Price: MYR 47.24- Days to Ship: 4 Day(s) or more -
NACHI
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.Standard Price: MYR 50.70- Days to Ship: 5 Day(s) or more -
UG Drill, Stainless Steel, UGSUS3.1/4.9
NACHI
This drill is ideal for stainless steel processing. UG coating with excellent heat resistance provides a long service life.
Standard Price: MYR 61.18- Days to Ship: 5 Day(s) or more -
NACHI
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.Standard Price: MYR 488.14- Days to Ship: 5 Day(s) or more -
Aqua Drill with Bottom Blade 3-Flute AQDED3F
NACHI
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.Standard Price: MYR 596.30- Days to Ship: 6 Day(s) or more -
NACHI
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.Standard Price: MYR 100.85- Days to Ship: 5 Day(s) or more -
NACHI
HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.Standard Price: MYR 61.89- Days to Ship: 5 Day(s) or more -
NACHI
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.Standard Price: MYR 404.30- Days to Ship: 5 Day(s) or more -
NACHI
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.Standard Price: MYR 436.66- Days to Ship: 5 Day(s) or more -
NACHI
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.Standard Price: MYR 135.31- Days to Ship: 5 Day(s) or more -
NACHI
Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.Standard Price: MYR 690.15 Days to Ship: 7 Day(s) or more -
NACHI
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.Standard Price: MYR 307.56- Days to Ship: 4 Day(s) or more -
NACHI
An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.Standard Price: MYR 173.15 Days to Ship: 9 Day(s) or more -
Aqua Drill, Stub, Carbide Drill, AQDS
NACHI
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.Standard Price: MYR 852.31 Days to Ship: 5 Day(s) or more -
Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS
OSG
Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.
Standard Price: MYR 398.78- Days to Ship: 5 Day(s) or more -
Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN
OSG
Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)
Standard Price: MYR 338.85- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D
OSG
Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.
Standard Price: MYR 630.89- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D
OSG
Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.
Standard Price: MYR 538.04- Days to Ship: 5 Day(s) or more -
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS
OSG
The collaboration with UVM-DRL enables high-precision drilling
Standard Price: MYR 1,204.83 Days to Ship: 5 Day(s) or more -
EX-GOLD Drills Regular with Morse Taper Shank for Stainless & Mild Steels_MT-SUS-GDR
OSG
Morse taper shank type suitable for lathes, drill presses, multi-axis dedicated machines, etc.
Standard Price: MYR 270.48- Days to Ship: 5 Day(s) or more -
OSG
Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds
Standard Price: MYR 45.97- Days to Ship: 5 Day(s) or more -
NEXUS Drills Regular_NEXUS-GDR
OSG
Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds
Standard Price: MYR 65.89- Days to Ship: 5 Day(s) or more -
HSS Extra Long Type 15D Type TDXL15D
OSG
Long drill that has achieved ultra-deep drilling up to 15D with HSS drill bit.
Standard Price: MYR 91.13- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | NACHI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular | TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular | DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub | TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】 | TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Stub | Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS | Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN | Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D | Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D | Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS | EX-GOLD Drills Regular with Morse Taper Shank for Stainless & Mild Steels_MT-SUS-GDR | |||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 2 ～ 20 | 3 ～ 13 | 2 ～ 13 | 3 ～ 13 | 3 ～ 8 | 3 ～ 13 | 3 ～ 13 | 0.3 ～ 6 | 1.1 ～ 8 | 1 ～ 8 | 1 ～ 7.5 | 3 ～ 10 | 7.52 ～ 11.38 | 5 ～ 12 | 6.8 ～ 10.3 | 2 ～ 13 | 2 ～ 12.5 | 1 ～ 13 | 2 ～ 10 | 13.5 ～ 30 | 8.5 ～ 50 | 8.5 ～ 28.5 | 1 ～ 13 | 1.2 ～ 17.7 | 3.1 ～ 4.9 | 4.1 ～ 10 | 6 ～ 11 | 4.9 ～ 20 | 2.3 ～ 32 | 2.9 ～ 15 | 2.1 ～ 11.9 | 2 ～ 9.9 | 10.5 | 4 ～ 9.5 | 1.3 | 12.5 | 1 ～ 3 | 0.3 ～ 2 | 0.02 ～ 0.09 | 0.02 ～ 0.09 | 0.05 | 6 ～ 50 | 1.2 ～ 10.5 | 4.5 ～ 11 | 1.5 ～ 12 |
| Overall Length L(mm) | 66 ～ 153 | 62 ～ 107 | 46 ～ 124 | 66 ～ 124 | 62 ～ 79 | 66 ～ 124 | 46 ～ 137 | 38 ～ 66 | 28 ～ 79 | 34 ～ 117 | 34 ～ 109 | 60 ～ 120 | 92 ～ 128 | 82 ～ 118 | 104 ～ 136 | 44 ～ 111 | 56 ～ 161 | 34 ～ 151 | 125 ～ 265 | 189 ～ 296 | 156 ～ 369 | 265 ～ 460 | 38 ～ 108 | 40 ～ 153 | 65 ～ 86 | 71 ～ 110 | 72 ～ 104 | 94 ～ 210 | 56 ～ 255 | 49 ～ 153 | 47 ～ 130 | 44 ～ 93 | 250 | 59 ～ 108 | 47 | 110 | 57 ～ 65 | 38 ～ 50 | 38 | 38 | 38 | 137 ～ 345 | 40 ～ 100 | 91 ～ 151 | 70 ～ 300 |
| Groove Length L(mm) | 20 ～ 101 | 20 ～ 60 | 12 ～ 77 | 28 ～ 77 | 20 ～ 41 | 28 ～ 77 | 16 ～ 78 | 2 ～ 28 | 7 ～ 37 | 12 ～ 75 | 12 ～ 69 | 28 ～ 61 | 48 ～ 71 | 44 ～ 71 | 48 ～ 72 | 12 ～ 51 | 24 ～ 101 | 12 ～ 101 | 85 ～ 185 | 108 ～ 175 | 75 ～ 220 | 165 ～ 305 | 6 ～ 51 | 8 ～ 87 | 36 ～ 52 | 27 ～ 60 | 28 ～ 47 | 52 ～ 140 | 25 ～ 185 | 19 ～ 91 | 15 ～ 73 | 12 ～ 43 | 120 | 27 ～ 58 | 15 | 51 | 5 ～ 15 | 2.5 ～ 18 | 0.22 ～ 0.99 | 0.12 ～ 0.54 | 0.075 | 57 ～ 200 | 8 ～ 43 | 47 ～ 94 | 30 ～ 216 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Stainless Steel[◎] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[◎] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[○] | general steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Cast Iron[◎] | high hardness steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] | Quenched and tempered steel[○] / high hardness steel[◎] | Quenched and tempered steel[○] / high hardness steel[◎] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | Taper shank | Taper shank | Taper shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | Cobalt HSS | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High Vanadium HSS | High Vanadium HSS | High Vanadium HSS | Cobalt HSS |
| With/without Oil Hole | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | Other | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | TiAlN | DLC | TiAlN | DLC | TiN | TiN | TiN | - | - | - | - | TiAlN | Other | TiCN | Other | Other | Other | TiCN | Other | Other | Other | TiN | DLC | DLC | Other | Other | Other | Other | Other | Other | TiN | Other | Other | Other |
Loading...
Configure
Specification/Dimensions
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1
-
1～1.995
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.7X10D
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.9X10D
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.984
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2×10D
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.383
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.42
- 2.43
- 2.439
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.489
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.578
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.62
- 2.63
- 2.64
- 2.642
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.705
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.779
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.92
- 2.93
- 2.94
- 2.947
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3×10D
- 3.01
- 3.02
- 3.03
- 3.04
- 3.048
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.264
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.455
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.571
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.658
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.734
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4×10D
- 4.01
- 4.02
- 4.03
- 4.039
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.176
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.217
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.366
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.623
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.763
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.837
- 4.84
- 4.85
- 4.852
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5×10D
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.1×10D
- 5.106
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.159
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.49999999999999
- 5.5
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.558
- 5.56
- 5.565
- 5.57
- 5.58
- 5.59
- 5.59999999999999
- 5.6
- 5.6×10D
- 5.61
- 5.616
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.69999999999999
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.79999999999999
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.89999999999999
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.954
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.99
- 6
- 6×10D
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.09999999999999
- 6.1
- 6.1×10D
- 6.15
- 6.19999999999999
- 6.2
- 6.2×10D
- 6.25
- 6.29999999999999
- 6.3
- 6.3×10D
- 6.35
- 6.35 (¼")
- 6.365
- 6.375
- 6.39999999999999
- 6.4
- 6.4×10D
- 6.45
- 6.49999999999999
- 6.5
- 6.5×10D
- 6.528
- 6.53
- 6.55
- 6.59999999999999
- 6.6
- 6.6×10D
- 6.63
- 6.65
- 6.69999999999999
- 6.7
- 6.7×10D
- 6.746
- 6.75
- 6.8
- 6.8×10D
- 6.85
- 6.89999999999999
- 6.9
- 6.9×10D
- 6.95
- 6.97
- 6.98
- 6.99
-
7～7.99
- 7
- 7×10D
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.09999999999999
- 7.1
- 7.1×10D
- 7.14
- 7.145
- 7.15
- 7.19999999999999
- 7.2
- 7.2×10D
- 7.25
- 7.29999999999999
- 7.3
- 7.3×10D
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39999999999999
- 7.4
- 7.4×10D
- 7.45
- 7.49999999999999
- 7.5
- 7.5×10D
- 7.52
- 7.54
- 7.541
- 7.55
- 7.59999999999999
- 7.6
- 7.6×10D
- 7.65
- 7.67
- 7.69999999999999
- 7.7
- 7.7×10D
- 7.75
- 7.79999999999999
- 7.8
- 7.8×10D
- 7.85
- 7.89999999999999
- 7.9
- 7.9×10D
- 7.938
- 7.94
- 7.94 to 8.49
- 7.95
- 7.953
- 7.97
- 7.98
- 7.99
-
8～8.99
- 8
- 8×10D
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.09999999999999
- 8.1
- 8.1×10D
- 8.15
- 8.19999999999999
- 8.2
- 8.2×10D
- 8.25
- 8.29999999999998
- 8.3
- 8.3×10D
- 8.33
- 8.334
- 8.35
- 8.39999999999998
- 8.4
- 8.4×10D
- 8.43
- 8.433
- 8.45
- 8.5
- 8.50 to 8.99
- 8.5×10D
- 8.53
- 8.55
- 8.58
- 8.59999999999998
- 8.6
- 8.6×10D
- 8.61
- 8.65
- 8.69999999999998
- 8.7
- 8.7×10D
- 8.73
- 8.733
- 8.75
- 8.79999999999998
- 8.8
- 8.8×10D
- 8.83
- 8.84
- 8.85
- 8.89999999999998
- 8.9
- 8.9×10D
- 8.95
- 8.96
- 8.98
- 8.99
-
9～9.99
- 9
- 9.00 to 9.49
- 9×10D
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.09999999999998
- 9.1
- 9.1×10D
- 9.129
- 9.13
- 9.15
- 9.19999999999998
- 9.2
- 9.2×10D
- 9.21
- 9.24
- 9.25
- 9.26
- 9.29999999999998
- 9.3
- 9.3×10D
- 9.34
- 9.347
- 9.35
- 9.36
- 9.38
- 9.39999999999998
- 9.4
- 9.4×10D
- 9.45
- 9.49999999999998
- 9.5
- 9.50 to 9.99
- 9.5×10D
- 9.50 to 11.07
- 9.52
- 9.525
- 9.54
- 9.55
- 9.59999999999998
- 9.6
- 9.6×10D
- 9.65
- 9.69999999999998
- 9.7
- 9.7×10D
- 9.75
- 9.79999999999998
- 9.8
- 9.8×10D
- 9.85
- 9.89999999999998
- 9.9
- 9.9×10D
- 9.92
- 9.921
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.99
- 10
- 10×10D
- 10.00 to 10.49
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.15
- 10.2
- 10.2×10D
- 10.25
- 10.3
- 10.3×10D
- 10.32
- 10.35
- 10.4
- 10.4×10D
- 10.45
- 10.5
- 10.5×10D
- 10.50 to 10.99
- 10.55
- 10.6
- 10.6×10D
- 10.65
- 10.7
- 10.7×10D
- 10.716
- 10.72
- 10.75
- 10.8
- 10.8×10D
- 10.85
- 10.9
- 10.9×10D
- 10.95
- 10.96
- 10.98
- 10.99
-
11～11.99
- 11
- 11×10D
- 11.00 to 11.49
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.10 to 12.95
- 11.11
- 11.113
- 11.133
- 11.15
- 11.2
- 11.2×10D
- 11.22
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.45
- 11.5
- 11.5×10D
- 11.50 to 11.99
- 11.509
- 11.51
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.65
- 11.7
- 11.7×10D
- 11.75
- 11.8
- 11.8×10D
- 11.85
- 11.9
- 11.9×10D
- 11.908
- 11.91
- 11.95
- 11.96
- 11.98
- 11.99
-
12～12.99
- 12
- 12×10D
- 12.00 to 12.49
- 12.0 or more, less than 12.5
- 12.00 to 12.99
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.25
- 12.3
- 12.304
- 12.4
- 12.5
- 12.50 to 12.99
- 12.5 or more, less than 13.0
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
- 12.98
- 12.98 to 17.65
- 12.99
-
13～13.99
- 13
- 13.00 to 13.49
- 13.0 or more, less than 13.5
- 13.00 to 13.99
- 13.01
- 13.02
- 13.03
- 13.096
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.43
- 13.49
- 13.5
- 13.50 to 13.99
- 13.5 or more and 14.5 or less
- 13.55
- 13.6
- 13.7
- 13.75
- 13.8
- 13.89
- 13.891
- 13.9
- 13.95
- 13.98
- 13.99
-
14～14.99
- 14
- 14.00 to 14.49
- 14.00 to 14.99
- 14~16
- 14.01
- 14.02
- 14.03
- 14.1
- 14.2
- 14.25
- 14.288
- 14.29
- 14.3
- 14.4
- 14.5
- 14.50 to 14.99
- 14.6
- 14.68
- 14.684
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
- 14.98
- 14.99
-
15～15.99
- 15
- 15.00 to 15.99
- 15.01
- 15.02
- 15.03
- 15.08
- 15.083
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.479
- 15.48
- 15.5
- 15.50 to 17.65
- 15.55
- 15.6
- 15.7
- 15.75
- 15.8
- 15.87
- 15.875
- 15.9
- 15.95
- 15.98
- 15.99
-
16～16.99
- 16
- 16.00 to 16.99
- 16.01
- 16.02
- 16.03
- 16.1
- 16.2
- 16.25
- 16.27
- 16.271
- 16.3
- 16.4
- 16.5
- 16.5~19.5
- 16.6
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
- 16.98
- 16.99
-
17～17.99
- 17
- 17.00 to 17.99
- 17.01
- 17.02
- 17.03
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.46
- 17.463
- 17.5
- 17.53 to 24.38
- 17.55
- 17.6
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
- 17.98
- 17.99
-
18～18.99
- 18
- 18.00 to 18.99
- 18.00 to 19.99
- 18.01
- 18.02
- 18.03
- 18.1
- 18.2
- 18.25
- 18.258
- 18.26
- 18.3
- 18.4
- 18.5
- 18.6
- 18.6～19.5
- 18.65
- 18.654
- 18.7
- 18.75
- 18.8
- 18.9
- 18.98
- 18.99
-
19～19.99
- 19
- 19.00 to 19.99
- 19.01
- 19.02
- 19.03
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.55
- 19.6
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
- 19.98
- 19.99
-
20～20.9
- 20
- 20.00 to 20.99
- 20.00 to 21.99
- 20~23.9
- 20.01
- 20.02
- 20.03
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21.00 to 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.6
- 21.7
- 21.75
- 21.8
- 21.83
- 21.83 to 24.38
- 21.9
-
22～22.9
- 22
- 22.00 to 22.99
- 22.00 to 23.99
- 22.1
- 22.2
- 22.22
- 22.23
- 22.25
- 22.3
- 22.4
- 22.5
- 22.6
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23.00 to 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.6
- 23.7
- 23.75
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.00 to 24.99
- 24.00 to 25.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.41 to 35.05
- 24.5
- 24.5/24.7
- 24.5～24.7
- 24.6
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.00 to 25.50
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 to 28.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.5/26.7
- 26.5～26.7
- 26.59
- 26.6
- 26.7
- 26.75
- 26.8
- 26.9
- 26.99
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.57
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 to 31.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.5
- 30
- 30.00 to 35.05
- 30.1
- 30.5
-
31～31.75
- 31
- 31.5
- 31.75
-
32
-
32～32.5
- 32.00 to 35.00
- 32.3
- 32.5
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.36 to 47.80
- 34.5
-
35
-
35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37.5
- 37.7
-
38
-
38～38.5
- 38.1
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41
-
41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.8
- 44
- 44~52
- 44.5
- 44.8
-
45～45.5
- 45
- 45.5
-
46～46.99 to 65.28
- 46
- 46.5
- 46.99 to 65.28
-
47～47.63
- 47
- 47.5
- 47.63
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.5
- 53
- 53~63
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.38 to 89.08
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87～87.76 to 114.48
- 87
- 87.76 to 114.48
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
143.0
-
-
Overall Length L(mm)
-
Groove Length L(mm)
-
0～0.99
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.36
- 0.4
- 0.42
- 0.44
- 0.48
- 0.5
- 0.54
- 0.55
- 0.6
- 0.66
- 0.7
- 0.77
- 0.8
- 0.88
- 0.9
- 0.99
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.5
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.5
- 29
- 29.3
- 29.4
- 29.5
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.8
- 31
- 31.2
- 31.5
- 31.7
- 31.8
-
32～32.8
- 32
- 32.3
- 32.4
- 32.8
-
33～33.8
- 33
- 33.5
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.4
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.2
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46～46.5
- 46
- 46.5
-
47
-
48
-
49～49.5
- 49
- 49.5
-
50
-
51
-
52～52.5
- 52
- 52.5
-
53
-
54
-
55～55.5
- 55
- 55.5
-
56
-
57
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.4
- 63
- 63.4
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.1
- 67.5
-
68
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.7
- 71
- 71.7
-
72
-
73～73.5
- 73
- 73.5
-
74
-
75～75.5
- 75
- 75.5
-
76～76.8
- 76
- 76.5
- 76.8
-
77
-
78
-
79～79.5
- 79
- 79.5
-
80～80.5
- 80
- 80.1
- 80.5
-
81～81.5
- 81
- 81.4
- 81.5
-
82～82.6
- 82
- 82.5
- 82.6
-
83
-
84
-
85～85.5
- 85
- 85.4
- 85.5
-
86～86.5
- 86
- 86.2
- 86.5
-
87
-
88～88.5
- 88
- 88.5
-
89
-
90～90.5
- 90
- 90.1
- 90.5
-
91
-
92～92.5
- 92
- 92.5
-
93
-
94～94.7
- 94
- 94.7
-
95～95.5
- 95
- 95.5
-
96
-
97～97.5
- 97
- 97.5
-
98～98.8
- 98
- 98.8
-
99
-
100～100.5
- 100
- 100.5
-
101
-
102
-
103～103.5
- 103
- 103.4
- 103.5
-
104
-
105～105.5
- 105
- 105.5
-
106
-
107
-
108～108.5
- 108
- 108.4
- 108.5
-
109
-
110～110.5
- 110
- 110.5
-
111
-
112
-
113
-
114～114.5
- 114
- 114.5
-
115～115.5
- 115
- 115.5
-
116
-
117
-
118
-
119～119.5
- 119
- 119.5
-
120～120.5
- 120
- 120.5
-
121
-
122
-
123
-
124～124.5
- 124
- 124.5
-
125～125.5
- 125
- 125.1
- 125.5
-
126
-
127
-
128
-
129～129.6
- 129
- 129.6
-
130
-
131
-
132
-
133～133.5
- 133
- 133.5
-
134
-
135～135.2
- 135
- 135.2
-
136
-
137
-
138
-
140
-
141.5
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150～150.5
- 150
- 150.5
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158～158.5
- 158
- 158.5
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167～167.5
- 167
- 167.5
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175～175.5
- 175
- 175.5
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184～184.5
- 184
- 184.5
-
185
-
186
-
188
-
189
-
190
-
191
-
192～192.1
- 192
- 192.1
-
193
-
194
-
195
-
196
-
197
-
198
-
200～200.6
- 200
- 200.6
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208～208.2
- 208
- 208.2
-
209
-
210
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
230
-
232
-
234
-
235
-
236
-
238
-
239
-
240
-
242
-
244
-
245
-
246
-
247
-
248
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
282
-
285
-
287
-
290
-
292
-
295
-
298
-
300
-
302
-
305
-
310
-
315
-
318
-
320
-
321
-
322
-
323
-
325
-
327
-
330
-
335
-
337
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
860
-
1030
-
-
work material
-
Shank Type
-
Tool Material Type
-
With/without Oil Hole
-
Coating Y/N
- Available
- NA
-
Coating Type
Narrow search by specifying Manufacturer
-
- GUHRING (91)
- NACHI (42)
- OSG (40)
- ATOM (20)
- EIKOSHA (12)
- IWATA TOOL (11)
- NS TOOL (8)
- ISHIHASHI (5)
- KYOWA SEIKO (5)
- OKAZAKI SEIKO (5)
- SUMITOMO_ELEC_ (5)
- DIJET (4)
- OMIKOGYO (4)
- UNION TOOL (4)
- FUKUDA (3)
- ISCAR (3)
- SANDVIK (3)
- SAITOTWISTDRILL (3)
- BICTOOL (2)
- ASAHI TOOLS (1)
- DIXI (1)
- NAKANISHI (1)
- NIKKENKOSAKU (0)
- HOZAN (0)
- TRUSCO NAKAYAMA (0)
- MARVEL (0)
- ESCO (0)
- WIDIN (0)
- MAPAL (0)
- 7 LEADERS (0)
- NGK SPARK PLUG (0)
- BOTEK (0)
- KYOCERA (0)
- THE_CUT (0)
- WIDIA (0)
CAD
-
- 2D
- 3D
Related Categories to Drill Bits
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy