(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Insert（Screw Type：Metric (Coarse) Thread）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *Please see the specification table or model number list for applicable products.
[Handling Standards] Coarse M diameter: 2, 2.2, 2.5, 2.6, 3, 3.5, 4, 5, 6, 8, 10, 12, 14, 16, 18, Fine M diameter: 6, 8, 10, 12, 14, 16, 18
You can purchase from 1 piece!
Application: Strengthens the female thread of the base.
Features: Durable screw connection. You can create a concise design.
Material: SUS304.- Volume Discount
Standard Price: MYR 4.23- Days to Ship: 1 Day(s) or more -
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Standard Price: MYR 12.70- Days to Ship: 4 Day(s) or more -
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: MYR 5.05- Days to Ship: 1 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Standard Price: MYR 0.71- Days to Ship: 1 Day(s) or more -
Ensat Chip Free Short Type, Model 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 3.48- Days to Ship: 11 Day(s) or more -
Ensat Chip Free Long Type, Model 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.72- Days to Ship: 5 Day(s) or more -
IMAO
Able to reinforce screw parts which have a high frequency of bolt attachment/removal, and any base metal screw parts. Can even be utilized for restoring damaged screws.
[Features]
· Simply insert the key to prevent loosening.
· Can quickly repair damaged screws.
· Suitable for use in places with a high frequency of bolt attachment/removal.
· Can reinforce all types of base metal screw except for iron, non-ferrous metal, and non-metallic types.Standard Price: MYR 70.33- Days to Ship: 7 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.28- Days to Ship: 11 Day(s) or more -
Ensat Expanded Slot Type, Model 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 3.09- Days to Ship: 1 Day(s) or more -
Thread Inserts, Economy series
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
- Volume Discount
Standard Price: MYR 2.53- Days to Ship: 6 Day(s) -
MISUMI
There is no need to break the tongue after insertion, making the insertion process easy
[Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.- Volume Discount
Standard Price: MYR 6.80- Days to Ship: 2 Day(s) or more -
E-Certs【1-100 Pieces Per Package】
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 3.36- Days to Ship: 2 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Standard Price: MYR 5.48- Days to Ship: 4 Day(s) or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: MYR 20.15- Days to Ship: 6 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
These inserts are the best choice for easy and secure fitment into plastic holes.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
Standard Price: MYR 5.33- Days to Ship: 4 Day(s) or more -
Ensat 3 Holes Short Type, Model 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.83- Days to Ship: 5 Day(s) or more -
RECOIL
[Features]
·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
·Dedicated tools enable the insertion and extraction without tangs.
·Extraction will not damage the male threads nor the product.
·You don't have to tear off the tang, look for the broken tang, or check the gauge.Standard Price: MYR 3.46- Days to Ship: 4 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 256.06- Days to Ship: 4 Day(s) or more -
Tangless Insert Metric Coarse【1-50 Pieces Per Package】
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
ACCURATE
· Can easily be taken out with the included tang. Fine adjustment of depth is possible even after insertion.
· Newly-developed insertion tool reduces mistakes and increases speed of work.Standard Price: MYR 3.50- Days to Ship: 8 Day(s) or more -
Thread Insert (Box), Economy series【100 Pieces Per Package】
MISUMI
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Standard Price: MYR 113.52- Days to Ship: 6 Day(s) -
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 5.50- Days to Ship: 5 Day(s) or more -
ACCURATE
"All-in-One" Tool and Ball Used For Work Including Pilot Hole Work and Insertion
Standard Price: MYR 810.44 Days to Ship: 4 Day(s) or more -
SUNCO
It is a tool that folds the tang after inserting the sprue.
Press the tip against the tang and lightly hit the head with a hammer to easily break off at the notch.
In addition, the snapped-off tang attaches to the magnet for confirmation on the spot.
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20
[Nominal W] #2-56, #4-40, #5-40, #6-32, #8-32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4Standard Price: MYR 141.94- Days to Ship: 5 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.30- Days to Ship: 4 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.37- Days to Ship: 11 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 189.21- Days to Ship: 2 Day(s) or more -
TSUGAMI
A general insertion tool that even beginners can use to perform easy insertion. Available in sizes of M 2.5 mm or larger for both coarse and fine threads. Sizes under 8 mm are available for standard threaded inserts and locks.
Standard Price: MYR 269.09- Days to Ship: 5 Day(s) or more -
C Lock (CL Type)【100 Pieces Per Package】
BOHSEI
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Standard Price: MYR 54.83- Days to Ship: 5 Day(s) or more -
Tangless insert metric coarselocking
ACCURATE
A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.
Standard Price: MYR 2.95- Days to Ship: 2 Day(s) or more -
Sprue Insertion Tool INP M Thread
SUNCO
[Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22
Standard Price: MYR 449.45- Days to Ship: 5 Day(s) or more -
Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.80- Days to Ship: 11 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 5.78- Days to Ship: 11 Day(s) or more -
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing- Volume Discount
Standard Price: MYR 1.61- Days to Ship: 4 Day(s) or more -
Sprue【1-100 Pieces Per Package】
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: MYR 2.01- Days to Ship: 4 Day(s) or more -
Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】
TOKAI
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.02- Days to Ship: 5 Day(s) or more -
Recoil Packet (METRIC)【10 Pieces Per Package】
RECOIL
[Features]
· The recoil is created by coiling a high quality stainless steel wire with rhomboid cross section into a spring-like shape.
· The insert is slightly larger than the tap hole of the other base metal, and can be attached by lightly narrowing down.
· Once equipped, its spring effect makes it almost permanently non-extractable.Standard Price: MYR 110.13- Days to Ship: 7 Day(s) or more -
Brass Ensat Thread Plastic Deformation Type, Model 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: MYR 2.93- Days to Ship: 5 Day(s) or more -
Steel Ensat With Pin Short Type, Model 317
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 30.90- Days to Ship: 5 Day(s) or more -
Steel Ensat With Pin Long Type, Model 318
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 30.95- Days to Ship: 5 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | RECOIL | MISUMI | TOKAI | KKV | HIROSUGI-KEIKI | KKV | IMAO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KKV | MISUMI | MISUMI | TSUGAMI | TOKAI | RECOIL | MISUMI | TOKAI | RECOIL | KKV | RECOIL | MISUMI | ACCURATE | ACCURATE | MISUMI | KKV | ACCURATE | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | MISUMI | TSUGAMI | BOHSEI | ACCURATE | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | NIPPON SPREW | TOKAI | RECOIL | KKV | KKV | KKV |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 1 Day(s) or more | 6 Day(s) | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | 6 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 1.6 ～ 8 | 3 ～ 12 | 2 ～ 8 | 3 ～ 16 | 4 ～ 24 | 2.6 ～ 8 | 2 ～ 8 | 2.5 ～ 27 | 3 ～ 16 | 2.5 ～ 10 | 2 ～ 24 | 2 ～ 8 | 3 ～ 16 | 3 ～ 12 | 2 ～ 10 | 3 ～ 16 | 3 ～ 16 | 2.5 ～ 12 | 2.5 ～ 8 | 2 ～ 24 | 3 ～ 6 | 3 ～ 8 | 3 ～ 16 | - | 2 ～ 16 | 1.4 ～ 5 | 1.4 ～ 5 | 3 ～ 8 | 3 ～ 10 | 2 ～ 6 | 2.5 ～ 12 | 2.2 ～ 20 | 2.6 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | 2 ～ 5 | 2 ～ 30 | 2.6 ～ 8 | 2 | 3 ～ 6 | 4 ～ 14 | 4 ～ 16 |
| Environmentally friendly | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) / Not RoHS Compliant | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Standard | Standard | Self-Tapping | Standard | Self-Tapping | Self-Tapping | Self-Tapping | Key Lock | Self-Tapping | Self-Tapping | Self-Tapping | Standard | Tangless | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Self-Tapping | Tangless | Tangless | Tangless | Standard | Standard | Self-Tapping | Tangless | Tool | Press Fit | Press Fit | Standard | Tool | Press Fit | Tangless | Tool | Self-Tapping | Self-Tapping | Self-Tapping | Press Fit | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Self-Tapping |
| Characteristics/Applications | Not Applicable | - | Not Applicable | - | - | - | - | - | - | - | - | Not Applicable | Not Applicable | - | - | - | Clean Washed | - | - | - | - | - | - | - | Not Applicable | - | - | - | - | - | Not Applicable | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Nitrox 60 | Steel / Stainless Steel (SUS303/304) | Brass | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) / Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS316) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) / Stainless Steel (SUS430F) | - | - | Brass | Brass | Stainless Steel (SUS303/304) | Steel | Brass | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) / Phosphor Bronze | Brass | Stainless Steel (SUS303/304) | Brass | Steel | Steel |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | 1D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1.5D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 2D | - | - | - |
| Application | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Resin General | - | Cast Iron | - | Light Metal / Cast Iron / Resin General / Wood | Cast Iron | Light Metal | - | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Light Metal | Light Metal | Resin General | Light Metal | - | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | Light Metal | - | - | - | Light Metal | Light Metal | Light Metal | - | Resin General | Light Metal / Cast Iron / Resin General | - | Cast Iron | Light Metal | Cast Iron | Light Metal | Light Metal | Resin General | - | - | - | - |
| Notch | Provided | Provided | Not Provided | Not Provided | - | Not Provided | - | Not Provided | Not Provided | Not Provided | - | Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | - | Not Provided / Provided | Not Provided | Not Provided | - | Provided | - | - | - | Not Provided | Not Provided | Provided | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | - | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | Slotted | Standard | Tip Free Type | Standard | Tip Free Type | - | Slotted | Standard | Slotted | - | - | - | Standard | - | Slotted | Standard | - | 3-Hole Type | - | - | - | - | - | 3-Hole Type | - | - | Standard | Standard | - | - | Standard | - | - | Standard | Slotted | Slotted | Standard | - | Standard | - | Standard | With Pin Type | With Pin Type |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | - | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
- Wood
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy