(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Insert（Sales Unit：Low Quantity (Available beginning with 1 pc.) Page2）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
RECOIL
[Features]
·A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
·The following parts are contained in a red plastic box.
·Pilot hole drill (M12-1/2 or less), Recoil tap #2 (HSS), Recoil (1.5D length), Insertion tool (M12-1/2 or less, with tap handle), Breaking tool with magnet (M12-1/2 or less).
·The spark plug kit contains a pilot tap.
·Pilot taps can be used to create oversize taps without using a drill, and since the original thread serves as a guide, angle errors do not occur.Standard Price: MYR 555.66- Days to Ship: 4 Day(s) or more -
Brass Ensat Thread Plastic Deformation Type, Model 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: MYR 2.93- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7Standard Price: MYR 2.12- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
Stainless Steel E-Sert Hemlock-Made
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 45.56- Days to Ship: 5 Day(s) or more -
SUNCO
[Nominal M] 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
[Nominal W] 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 1-8Standard Price: MYR 213.37- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M]2, 2.5, 3, 4, 5, 6, 8, 10, 12. [Thread Type]metric (coarse) thread
Standard Price: MYR 1,123.81- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 105.19- Days to Ship: 5 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M201.5, M221.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: MYR 134.97- Days to Ship: 9 Day(s) or more -
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromateStandard Price: MYR 7.09- Days to Ship: 5 Day(s) or more -
MISUMI
Compatible threaded insert M2 to 12, a set of 2 pcs., a plug tap and a bottoming tap.
- Volume Discount
Standard Price: MYR 302.51- Days to Ship: 2 Day(s) or more -
TSUGAMI
A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.
Standard Price: MYR 113.39- Days to Ship: 5 Day(s) or more -
TSUGAMI
This is a tap that was especially designed for E-sert (helisert) bottom holes.
Standard Price: MYR 156.70- Days to Ship: 5 Day(s) or more -
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Standard Price: MYR 8.31- Days to Ship: 5 Day(s) or more -
Sel Locking Fastener SLN (Non-Lock)
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Standard Price: MYR 8.43 Days to Ship: 5 Day(s) or more -
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Standard Price: MYR 3.99- Days to Ship: 5 Day(s) or more -
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
Standard Price: MYR 5.11- Days to Ship: 5 Day(s) or more -
NIPPON SPREW
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
Standard Price: MYR 6.01- Days to Ship: 5 Day(s) or more -
NIPPON SPREW
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
Standard Price: MYR 4.26- Days to Ship: 5 Day(s) or more -
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Standard Price: MYR 6.01 Days to Ship: 5 Day(s) or more -
Dodge Insert Flange Type (Brass Cadmium-Less)
TOKAI
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.63- Days to Ship: 5 Day(s) or more -
DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 5 Day(s) or more -
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
Standard Price: MYR 385.08- Days to Ship: 12 Day(s) or more -
RECOIL
[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.Standard Price: MYR 92.67- Days to Ship: 7 Day(s) or more -
RECOIL
Recoil, threaded insert, recoil-free special size. [Thread Type]Coarse. "Material" SUS304
Standard Price: MYR 7.59- Days to Ship: 4 Day(s) or more -
RECOIL
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
Standard Price: MYR 6.21- Days to Ship: 4 Day(s) or more -
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
Standard Price: MYR 5.19- Days to Ship: 4 Day(s) or more -
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.Standard Price: MYR 88.41- Days to Ship: 4 Day(s) or more -
RECOIL
Features of the recoil tool include its simplicity, compatibility and ease of use.
Standard Price: MYR 861.97- Days to Ship: 13 Day(s) or more -
Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Standard Price: MYR 3.87- Days to Ship: 2 Day(s) or more -
Ensat Extra Coarse External Thread Type, Model 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Standard Price: MYR 3.54- Days to Ship: 5 Day(s) or more -
Tool for Ensat, for Manual Processing, 610 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: MYR 444.80- Days to Ship: 2 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8Standard Price: MYR 1.40- Days to Ship: 1 Day(s) or more -
Flat Head Sonic Lock (Type SHK)
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2DStandard Price: MYR 2.41- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2Standard Price: MYR 1.45- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
[Length] B (mm) 4.8 8.0Standard Price: MYR 2.36- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0Standard Price: MYR 4.94- Days to Ship: 5 Day(s) or more -
Stainless Steel Tangless Insert
SUNCO
[Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 4.26- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 2.02 Days to Ship: 9 Day(s) or more -
Standard Price: MYR 1.73 Days to Ship: 9 Day(s) or more -
Stainless Steel Sprue (Other, Fine)
SUNCO
[Nominal M] 8, 24, 33
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 49.89 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 11.78 Days to Ship: 5 Day(s) or more -
SUNCO
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 4.48- Days to Ship: 5 Day(s) or more -
Stainless Steel E-Sert Fine (Hemlock-Made)
SUNCO
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 4.09- Days to Ship: 5 Day(s) or more -
Stainless Steel E-Sert (Unify) (UNC)
SUNCO
[Nominal]
[Material] Stainless Steel
[Surface Processing] BareStandard Price: MYR 4.38- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | RECOIL | KKV | JAPAN_DRIVEIT | JAPAN_DRIVEIT | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | KKV | MISUMI | TSUGAMI | TSUGAMI | SEL JAPAN | SEL JAPAN | NIPPON SPREW | NIPPON SPREW | NIPPON SPREW | NIPPON SPREW | TSUGAMI | TOKAI | TOKAI | RECOIL | RECOIL | RECOIL | RECOIL | RECOIL | RECOIL | RECOIL | KKV | KKV | KKV | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO |
| Product Series | DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free) | Steel Ensat Small Outer Diameter Expanded Slot Type, Model 303 | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 10 ～ 18 | 3 ～ 6 | 2 ～ 6 | 3 ～ 5 | 27 ～ 30 | 6 ～ 30 | 2 ～ 12 | 2 ～ 16 | 6 ～ 36 | - | - | 3 ～ 8 | 3 ～ 12 | 3 ～ 4 | 4 | 10 ～ 20 | - | - | 4 ～ 10 | - | 2.6 ～ 6 | 1.4 ～ 5 | - | 2 ～ 16 | 3 ～ 8 | 6 ～ 8 | 3 ～ 24 | 3 ～ 12 | 3 ～ 10 | 3 ～ 10 | 3 ～ 16 | 2.5 ～ 16 | 2 ～ 10 | 2 ～ 8 | 2 ～ 6 | 3 ～ 4 | 3 ～ 8 | 2 ～ 20 | 2.5 | 3 | 24 | - | 3 ～ 10 | 6 ～ 30 | - |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Tool | Self-Tapping | Press Fit | Press Fit | Standard | Tool | Tool | Tool | Tool | Self-Tapping | Tool | Tool | Tool | Swaged | Swaged | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Tool | Tool | Standard | Standard | Standard | Standard | Tool | Self-Tapping | Self-Tapping | Tool | Press Fit | Press Fit | Press Fit | Press Fit | Self-Tapping | Tangless | Press Fit | Press Fit | Standard | Standard | Standard | Standard | Standard |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Stainless Steel (SUS303/304) | - | - | - | - | Steel | - | Steel | Steel | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Phosphor Bronze | Inconel X-750 | - | Steel | Stainless Steel (SUS303/304) / Brass | Steel | Brass | Brass | Brass | Brass | Brass | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) |
| Screw Type | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread / Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread / BSW (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Unified (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | - | - | 2D | 2D | 1D / 1.5D / 2D | - | - | - | - | - | - | - | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D | 1D / 2D | 1D / 1.5D / 2D | - | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D | - | - | 0.5D / 0.8D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | - | - | 1D / 1.5D / 2D / 2.5D | 1.5D / 2D | 1D / 1.5D / 2D | 1.5D / 2D | 2D / 2.5D | 1D / 1.5D / 2D | - | - | 1D | 1D | 1D / 1.5D / 2D / 0.5D | 1D / 1.5D / 2D | 1D / 1.5D / 2D |
| Application | - | - | - | Resin General | - | - | - | - | - | - | - | - | - | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron / Resin General | Resin General | Resin General | - | - | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron | - | - | - | - | - | - | Resin General | - | Resin General | - | - | - | - | - | - | - | - |
| Notch | - | - | Not Provided | Not Provided | Provided | - | - | - | - | Not Provided | - | - | - | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | - | - | Provided | Provided | Provided | Provided | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | 1/4 ～ 5/8 | - | - | - | 5/8 ～ No. 8 | - | - | - | - | - | - | 1/2-13 ～ #10-24 | #10-32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3/8-24 | - | - | 1/2-13 ～ #8-32 |
| Shape | - | Standard | Standard | Standard | Standard | - | - | - | - | Slotted | - | - | - | - | - | - | - | - | - | - | Standard | Standard | - | - | - | - | - | - | - | Small O.D. Slotted Type | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Slotted |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
- Wood
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
-
- SUNCO (37)
- RECOIL (22)
- KKV (9)
- JAPAN_DRIVEIT (7)
- TSUGAMI (7)
- TOKAI (6)
- NIPPON SPREW (5)
- HIROSUGI-KEIKI (2)
- SEL JAPAN (2)
- IMAO (1)
- KSSC (0)
- ACCURATE (0)
- BOHSEI (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy