(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Insert
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Self-Tapping Inserts - Slotted
MISUMI
This is a tapping insert with split groove and has threads on both inner and outer diameters.
Fastening parts that do not require a front power strip to compensate for the mechanical strength of thread sections made of materials with relatively low strength.- Volume Discount
Standard Price: MYR 5.05- Days to Ship: 1 Day(s) or more -
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】
TOKAI
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
Standard Price: MYR 0.71- Days to Ship: 1 Day(s) or more -
Stainless Steel/Insert Nut Threaded Type / IRU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 3.48- Days to Ship: 11 Day(s) or more -
IMAO
Able to reinforce screw parts which have a high frequency of bolt attachment/removal, and any base metal screw parts. Can even be utilized for restoring damaged screws.
[Features]
· Simply insert the key to prevent loosening.
· Can quickly repair damaged screws.
· Suitable for use in places with a high frequency of bolt attachment/removal.
· Can reinforce all types of base metal screw except for iron, non-ferrous metal, and non-metallic types.Standard Price: MYR 70.33- Days to Ship: 7 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Slotted)/IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.28- Days to Ship: 11 Day(s) or more -
MISUMI
There is no need to break the tongue after insertion, making the insertion process easy
[Specification expansion] In response to many requests, a new standard product has been released! *Please see the specification list or catalog PDF for applicable products.- Volume Discount
Standard Price: MYR 6.80- Days to Ship: 2 Day(s) or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
![[Clean & Pack]Self-Tapping Inserts - Slotted](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Self-Tapping Inserts - Slotted
MISUMI
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products·Degreasing (Anti-rust single packing) : Part Number SL-□□ ·Precision cleaning (Degassing double packing) : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removalClean environment (Class 10 to 1,000) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reductionVacuum environment
Clean environment (Class 10 to 1,000)Pre-semiconductor process Liquid crystal deposition process Pre-OLED process ■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Slotted tapping inserts with both external and internal threads.
This fastener components reinforce relatively-low mechanical thread strength and allow skipping of the pre-tapping.- Volume Discount
Standard Price: MYR 20.15- Days to Ship: 6 Day(s) or more -
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
TOKAI
These inserts are the best choice for easy and secure fitment into plastic holes.
Standard Price: MYR 1.06- Days to Ship: 1 Day(s) or more -
RECOIL
[Features]
·The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
·Dedicated tools enable the insertion and extraction without tangs.
·Extraction will not damage the male threads nor the product.
·You don't have to tear off the tang, look for the broken tang, or check the gauge.Standard Price: MYR 3.46- Days to Ship: 4 Day(s) or more -
Thread Insert Installation Tool
MISUMI
[Specification expansion] In response to many requests, a new standard product has been released!
- Volume Discount
Standard Price: MYR 370.67- Days to Ship: 2 Day(s) or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
For in-house inventory or for a large number of uses, purchasing by the carton is advantageous.
Standard Price: MYR 256.06- Days to Ship: 4 Day(s) or more -
Tangless Insert Metric Coarse【1-50 Pieces Per Package】
ACCURATE
An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.
Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
Brass Bit Insert (Standard Model / Single-Sided Type) HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.30- Days to Ship: 4 Day(s) or more -
Brass Bit Insert (Standard, Double-sided) HSB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.37- Days to Ship: 11 Day(s) or more -
Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 4.59- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 2.80- Days to Ship: 11 Day(s) or more -
Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingStandard Price: MYR 5.78- Days to Ship: 11 Day(s) or more -
Brass Bit Insert (Flange Type) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing- Volume Discount
Standard Price: MYR 1.61- Days to Ship: 4 Day(s) or more -
Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】
TOKAI
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.02- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7Standard Price: MYR 2.12- Days to Ship: 5 Day(s) or more -
Heat-Lok (HL Type)【1-1,000 Pieces Per Package】
JAPAN_DRIVEIT
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7Standard Price: MYR 1.90- Days to Ship: 2 Day(s) or more -
Brass Insert Nut (Screw-In Type) IRB-W/-CW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 3.95- Days to Ship: 11 Day(s) or more -
Aluminum Insert Nut (Screw-In Type) IRL-B/IRL-K
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen platingStandard Price: MYR 2.72- Days to Ship: 11 Day(s) or more -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingStandard Price: MYR 4.15- Days to Ship: 11 Day(s) or more -
Brass Dutch Insert (Standard) / HSD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 2.63- Days to Ship: 11 Day(s) or more -
Brass Dutch Insert (Flanged) / HFD
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 3.22- Days to Ship: 11 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.53- Days to Ship: 11 Day(s) or more -
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromateStandard Price: MYR 7.09- Days to Ship: 5 Day(s) or more -
Self Floating Fastener【1-1,000 Pieces Per Package】
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Standard Price: MYR 8.31- Days to Ship: 5 Day(s) or more -
Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Standard Price: MYR 8.43- Days to Ship: 5 Day(s) or more -
Sel Locking Fastener SL (Lock)【1,000 Pieces Per Package】
SEL JAPAN
The optimal nut for preventing vibrating parts working loose, etc. To fix in place, simply press in and tighten with a normal screwdriver. No special tools required.
Standard Price: MYR 8,597.14 Days to Ship: 9 Day(s) or more -
Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】
TOKAI
Offers the strongest tension and other strengths over other inserts.
Standard Price: MYR 1.51- Days to Ship: 5 Day(s) or more -
Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】
TOKAI
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Standard Price: MYR 2.63- Days to Ship: 5 Day(s) or more -
TOKAI
General purpose type. Low cost and well balanced.
Standard Price: MYR 1.06- Days to Ship: 5 Day(s) or more -
Tool for Ensat, for Manual Processing, 610 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: MYR 444.80- Days to Ship: 2 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8Standard Price: MYR 1.40- Days to Ship: 1 Day(s) or more -
Flat Head Sonic Lock (Type SHK)
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2DStandard Price: MYR 2.41- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2Standard Price: MYR 1.45- Days to Ship: 5 Day(s) or more -
Sparrow Insert With Flat Head (HSR Type)
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2DStandard Price: MYR 1.73- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)
[L](D = screw diameter M) 1.5D 2DStandard Price: MYR 4.54- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw length (after insertion)
[L](D = screw diameter M) 2D with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5
[Length] B (mm) 5.8 8.2 9.5Standard Price: MYR 5.44- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
[Length] B (mm) 4.8 8.0Standard Price: MYR 2.36- Days to Ship: 5 Day(s) or more -
JAPAN_DRIVEIT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0Standard Price: MYR 4.94- Days to Ship: 5 Day(s) or more
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | TOKAI | HIROSUGI-KEIKI | IMAO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | MISUMI | TOKAI | MISUMI | TOKAI | RECOIL | MISUMI | MISUMI | ACCURATE | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | TOKAI | JAPAN_DRIVEIT | JAPAN_DRIVEIT | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | KKV | SEL JAPAN | SEL JAPAN | SEL JAPAN | TOKAI | TOKAI | TOKAI | KKV | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT | JAPAN_DRIVEIT |
| Product Series | Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Stainless Steel/Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W | Stainless Steel Insert Nut, Screw-in (Thread Locker / Slotted) / IRU-SW | Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】 | Sel Locking Fastener SLN (Non-Lock)【1-1,000 Pieces Per Package】 | Ultrasert 4 FUIV, Flange Type (Brass, Cadmium-Free)【1-1,000 Pieces Per Package】 | Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 6 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | 1.6 ～ 8 | 2 ～ 8 | 4 ～ 24 | 2.6 ～ 8 | 2 ～ 8 | 2.5 ～ 10 | 2 ～ 8 | 3 ～ 12 | 2 ～ 10 | 3 ～ 12 | 3 ～ 16 | 2.5 ～ 8 | 2 ～ 24 | 1.4 ～ 5 | 1.4 ～ 5 | 2.6 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | 2 ～ 5 | 2.6 ～ 8 | 2 ～ 6 | 3 ～ 6 | 2.6 ～ 8 | 2 ～ 8 | 2.6 ～ 8 | 2.6 ～ 5 | 2.6 ～ 5 | 2 ～ 10 | - | 3 ～ 4 | 3 ～ 4 | 4 | 3 ～ 8 | 2.6 ～ 8 | 1.4 ～ 6 | 2.5 ～ 16 | 2 ～ 10 | 2 ～ 8 | 2 ～ 6 | 3 ～ 8 | 3 ～ 6 | 3 ～ 5 | 3 ～ 4 | 3 ～ 8 |
| Environmentally friendly | RoHS Compliant (10 Substances) / Not RoHS Compliant | - | - | - | - | - | RoHS Compliant (10 Substances) | - | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Self-Tapping | Standard | Self-Tapping | Key Lock | Self-Tapping | Self-Tapping | Tangless | Standard | Self-Tapping | Standard | Tangless | Tool | Tangless | Tangless | Press Fit | Press Fit | Self-Tapping | Self-Tapping | Self-Tapping | Press Fit | Standard | Press Fit | Press Fit | Self-Tapping | Self-Tapping | Self-Tapping | Press Fit | Press Fit | Press Fit | Self-Tapping | Swaged | Swaged | Swaged | Standard | Standard | Standard | Tool | Press Fit | Press Fit | Press Fit | Press Fit | Press Fit | Press Fit | Press Fit | Self-Tapping |
| Characteristics/Applications | Not Applicable | - | - | - | - | - | Not Applicable | - | Clean Washed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Steel / Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Stainless Steel (SUS303/304) | Brass | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Brass | Brass | Aluminum | Brass | Brass | Brass | Brass | Steel | Steel / Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Brass | Brass | Brass | Steel | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 2D | 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1.5D / 2D / 2.5D / 3D / 3.5D | 2D / 2.5D | 1D / 1.5D / 2D | - | - | - | - | 1.5D / 2D | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | - | 1D / 1.5D / 2D / 2.5D | 1.5D / 2D | 1D / 1.5D / 2D | 1.5D / 2D | 1.5D / 2D | 2D | 1.5D / 2D | 2D / 2.5D |
| Application | Light Metal | Resin General | Cast Iron | Light Metal / Cast Iron / Resin General / Wood | Cast Iron | Light Metal | Light Metal | Resin General | Light Metal | Resin General | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal / Cast Iron / Resin General | Light Metal | Light Metal | Cast Iron | Light Metal | Cast Iron | Light Metal | Resin General | - | Resin General | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | - | Light Metal | Light Metal | Light Metal | Resin General | Resin General | Resin General | - | - | - | Resin General | - | - | - | - | Resin General |
| Notch | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5/8 ～ No. 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | Slotted | Standard | Standard | - | Slotted | Standard | - | Standard | Slotted | Standard | - | - | - | - | Standard | Standard | Standard | Slotted | Slotted | Standard | Standard | Standard | Standard | Standard | Standard | Slotted | Standard | Standard | Standard | Slotted | - | - | - | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) |
| Cleaning Method | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning / Electrolytic Polishing + Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Clean & Pack]Self-Tapping Inserts - Slotted](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110310783359/110310783359_001_20230911105917.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
- Wood
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
-
- HIROSUGI-KEIKI (20)
- JAPAN_DRIVEIT (11)
- TOKAI (7)
- SEL JAPAN (3)
- KKV (2)
- SUNCO (2)
- ACCURATE (1)
- IMAO (1)
- RECOIL (1)
- TSUGAMI (0)
- KSSC (0)
- BOHSEI (0)
- ESCO (0)
- NIPPON SPREW (0)
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy