(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.







NABEYA
A screw-in nozzle that can lean 35° forward or back, left or right.
[Features]
- The nozzle on the taper face can be inclined by 35° in any direction for precision spraying.
| Standard Price: | MYR 159.06- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

NABEYA
Nozzle tip which allows a nozzle tip to be used for screw types.
[Features]
· Nozzle tip can be mounted to a screw-based SB type, TJ type, or JB type
| Standard Price: | MYR 82.65- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

NABEYA
Screw-in nozzle. 10-MPa high-pressure type. Can stably tilt 35 degrees forward or back, left or right.
[Features]
· 10 MPa high-pressure type
| Standard Price: | MYR 161.93- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
A round counter-sunk screw mounting nozzle. Compact, embeddable in machinery or fixtures, and does not interfere with blades or jigs.
| Standard Price: | MYR 128.62- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Air-Amplifying Nozzle, TAIFUJet Series (Round Type, Metal)
IKEUCHI
[Features]
· Strong straight air is sprayed from 8 pores.
· Standard round nozzle for spraying to a pinpoint target.
· Super light-weight and compact design.
· Environmentally-friendly quiet design whose noise level is at least 10 dB (A) lower than a single-hole nozzle.
· For air blowing applications in gaps, pipes and other small spaces where strong impact force is required.
| Standard Price: | MYR 118.33- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Air/Steam Type Flat Fan-Shaped Nozzle, VZ Series (Compressor Specification)
IKEUCHI
Sprays air and steam in a flat pattern. Unlike with liquids, the sustained distance for effective spray angles is extremely short.
| Standard Price: | MYR 83.44- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

UT Ball Joint, UT Series Metal / Plastic Made
IKEUCHI
[Metal] Allows precise nozzle alignment after piping. Ideal for angled mounting or to allow change of direction as required.
[Plastic] Enables angle adjustment while spraying up to 0.3 MPa.
[Features]
· Allows precise nozzle alignment after piping.
· Ideal for angled mounting or to allow change of direction as required.
· Available in sizes from 1/8 inch to 3/4 inch.
· Enables angle adjustment while spraying up to 0.3 MPa.
· No O-ring required. Can be tightened by hand.
· Weight is less than half of the metal ball joint.
· Very inexpensive due to the injection-molded construction.
| Standard Price: | MYR 53.94- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Air Nozzle, TAIFUJet Series (Blower Specification/Flat)
IKEUCHI
A jet air nozzle with a uniform jet width of 42 mm. The TAIFUJet uses a blower that generates only a third the energy costs of compressor air types. A unique design that combines an air amplification function, quietness, and uniformity, etc.
| Standard Price: | MYR 910.28- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Air Nozzle, TAIFUJet Series (Blower Model, Round Type)
IKEUCHI
The TAIFUJet uses a blower that requires only a third of the energy costs of compressor air types. A unique design that combines an air amplification function, quietness, and uniformity, etc.
| Standard Price: | MYR 447.27- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EVERLOY
With a conventional nozzle, the impact force is strongest directly below the nozzle and weaker at the end. Here, the internal structure has been optimized to make uniform blowing possible.
| Standard Price: | MYR 639.97 |
|---|---|
| Days to Ship: | 10 Day(s) or more |

Compact MX Series for Compressor
DAIKOKENNETU
With the Double-slit method, two processes can be done with one nozzle, which makes it possible to execute tasks such as water drainage almost perfectly.
| Standard Price: | MYR 1,295.00- |
|---|---|
| Days to Ship: | 12 Day(s) or more |

Terminals for Nozzles - Block Type
MISUMI
A terminal that can be directly attached to the nozzle.
| Standard Price: | MYR 19.39- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
◆Features: Nozzle suitable for pipe cleaning.
◆Application: Use when blowing the outer circumference of cylindrical workpieces (pipes, etc.).
◆Air source: Compressor◆Material: A6063
| Standard Price: | MYR 240.38- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Terminals for Nozzles - Multi Port Clamp
MISUMI
[Features]·A terminal for nozzles, multi-link type. [Material]·It is A5052.
| Days to Ship: | 6 Day(s) or more |
|---|

Flat Air Nozzles - For Blowers
MISUMI
◆Features: A flat air nozzle made of metal (A5052P) suitable for high-flow air blowing using a blower.
By using a blower as the air source, you can save on electricity and air.
This nozzle is suitable for continuous jetting over long periods of time.
◆Air source: Blower◆Injection shape: Straight
◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃
| Standard Price: | MYR 452.70 |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
◆ Features: A dust collecting nozzle that collects dust removed by the nozzle.
Can also be used for spraying applications. Anti-static, allowing use in a wide range of environments.
Made from plastic (PE) for economical pricing. Flange machining and L-shaped bracket mount machining also possible.
◆ Heat Resistance Temperature: 70°C
◆ For Technical Data, see here.
◆ Free sample rental available here
◆ For Application Examples, see here.
| Standard Price: | MYR 137.52- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Flat Air Nozzles - Compact (Metal)
MISUMI
◆Features: Compact metal (ADC12) air nozzle with a total length of 30 mm and a nozzle width of 33 mm. Electroless nickel plating is applied to the surface treatment.
| Standard Price: | MYR 330.03 |
|---|---|
| Days to Ship: | 4 Day(s) or more |

90 degree air nozzle compact type metal type
MISUMI
◆Features: A compact air nozzle made of metal (aluminum) with a total length of approximately 25 mm and an installation angle of 90 degrees. The surface treatment is electroless nickel plating.
| Standard Price: | MYR 357.54 |
|---|---|
| Days to Ship: | 2 Day(s) |

MISUMI
◆Features: A flexible joint made of resin that can be fixed in any position. Can be used in conjunction.
Loosen the cap, move the ball and tighten it to fix it in any position.
The adjustable angle range is 50°. Can be used for both air and liquid.
| Standard Price: | MYR 52.25 |
|---|---|
| Days to Ship: | 4 Day(s) or more |
![[Clean & Pack]Nozzles with Swaged Sleeve Fitting](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310815849/110310815849_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Nozzles with Swaged Sleeve Fitting
MISUMI
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |

| Standard Price: | MYR 88.06- |
|---|---|
| Days to Ship: | 6 Day(s) or more |
![[Clean & Pack]Flow Rate Control Nozzle](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310815939/110310815939_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Flow Rate Control Nozzle
MISUMI
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |

| Standard Price: | MYR 111.54 |
|---|---|
| Days to Ship: | 6 Day(s) or more |
![[Clean & Pack]Flat Air Nozzles - Standard, Metal, Casting](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310816029/110310816029_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Flat Air Nozzles - Standard, Metal, Casting
MISUMI
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |

| Standard Price: | MYR 398.08- |
|---|---|
| Days to Ship: | 6 Day(s) or more |
![[Clean & Pack]Steel Hollows for Air Nozzles](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110310816119/110310816119_001_20230911105917.jpg?$product_view_b$)
[Clean & Pack]Steel Hollows for Air Nozzles
MISUMI
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
| Days to Ship: | 6 Day(s) or more |
|---|

Insert Nozzle JT Type (Mounting Parts Angle Type)
NABEYA
Screw-in type nozzle. Mounting element for copper tube nozzles. Angled type. The angle can be changed by 90 degrees.
| Standard Price: | MYR 83.66 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

NABEYA
Round dish screw mounting nozzle. The copper tube nozzle can be freely oriented to the required position.
| Standard Price: | MYR 134.24 |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
Press Fit Nozzle. Compact and suitable for embedding in machinery or fixtures. The edged tool does not interfere with fixtures.
[Features]
· Can be embedded in machines or jigs so as not to interfere with blades or jigs.
· The nozzle angle can be speedily changed
| Standard Price: | MYR 106.98- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
The total length of the tube can be shortened or the tube can be bent.
[Features]
· Suitable for mounting to nozzle tips with a SB type, TJ type, or JB type screw part.
· The total length of the tube can be shortened or the tube can be bent
| Standard Price: | MYR 56.36- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
[Features]
· Round countersunk screw mount nozzle.
· Nozzle angle of 70° that can be changed a lot.
| Standard Price: | MYR 151.09 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

NABEYA
Press Fit Nozzle. Compact and can be incorporated into machinery or fixtures. The blade does not interfere with fixtures.
[Features]
· Can be incorporated into machinery or fixtures with no interference with blades or fixtures.
· The nozzle angle can be quickly changed.
| Standard Price: | MYR 102.71- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Insert Nozzle JT Type (Mounting Parts Straight Type)
NABEYA
Screw-in type nozzle. Mounting element for copper tube nozzles. Straight type.
[Features]
· The copper tube can be freely turned in the direction which requires the coolant.
· The copper tube enables the coolant to be safely used where needed.
· The nozzle angle can be quickly changed 35° to the front, back, left, or right
| Standard Price: | MYR 78.05 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

NABEYA
Screw-in type nozzle. It is compact and can be embedded in machinery or fixtures. The edged tool does not interfere with fixtures.
[Features]
· Can be embedded to machines or jigs, without interfering with blades or jigs.
· The nozzle angle can be quickly changed
| Standard Price: | MYR 171.49- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
Screw-in type nozzle. 10-MPa high-pressure type. It can stably lean 35 degrees forward or back, left or right.
[Features]
· 10MPa high-pressure type
| Standard Price: | MYR 305.67- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
Screw-in type nozzle. It can stably lean 35° forward or back, left or right.
[Features]
· The nozzle on the taper face can be inclined by 35° back and forth and around so you can apply it properly.
| Standard Price: | MYR 122.99- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NABEYA
Adjustment bar with easily changed nozzle angle.
[Features]
· The nozzle angle is easily changed
| Standard Price: | MYR 55.06 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Air Amplifying Nozzle, TAIFUJet Series (Round Type, Resin)
IKEUCHI
[Features]
· Strong straight air is sprayed from 8 pores.
· Standard round nozzle for spraying to a pinpoint target.
· Super light-weight and compact design.
· Environmentally-friendly quiet design whose noise level is at least 10 dB (A) lower than a single-hole nozzle.
· For air blowing applications in gaps, pipes and other small spaces where strong impact force is required.
| Standard Price: | MYR 56.07 |
|---|---|
| Days to Ship: | 8 Day(s) |

EVERLOY
With a conventional nozzle, the impact force is strongest directly below the nozzle and weaker at the end. Here, the internal structure has been optimized to make uniform blowing possible.
| Standard Price: | MYR 94.65 |
|---|---|
| Days to Ship: | 10 Day(s) or more |

Air Blaster Compact Type Resin AB-C
EVERLOY
The nozzle can be installed in narrow spaces, helping save on space during installation and design. PPS resin is used to ensure excellent chemical and heat resistance.
| Standard Price: | MYR 72.96 |
|---|---|
| Days to Ship: | 10 Day(s) or more |

Air Blaster, Blower Type AB-B50P
EVERLOY
High-capacity 50 mm width of blower handles large volumes. PPS resin for excellent chemical resistance and heat resistance.
| Standard Price: | MYR 132.71 |
|---|---|
| Days to Ship: | 10 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Spray Pattern |
| Environmentally friendly |
| Spraying Angle θ (at 0.5MPa)(deg) |
| Characteristics/Applications |
| Air Source |
| Material |
| Mounting Angle |
| Angle Adjustment |
| Material Details |
| Blow Type |
| Type |
| Features |
| Applicable Fluid |
| Cleaning Method |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | IKEUCHI | IKEUCHI | IKEUCHI | IKEUCHI | IKEUCHI | EVERLOY | DAIKOKENNETU | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | IKEUCHI | EVERLOY | EVERLOY | EVERLOY |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Air/Steam Type Flat Fan-Shaped Nozzle, VZ Series (Compressor Specification) | |||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Spray Pattern | Point | Air Nozzle Related Components | Point | Point | Round, Diffused | Fan | Air Nozzle Related Components | Straight | Round, Diffused | Fan | Straight | Air Nozzle Related Components | Round, Diffused | Air Nozzle Related Components | Straight | - | Straight | Straight | Air Nozzle Related Components | Point | Point | Straight | Air Nozzle Related Components | Point | Point | Point | Air Nozzle Related Components | Point | Point | Point | Point | Point | Point | Air Nozzle Related Components | Round, Diffused | Fan | Fan | Fan |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | RoHS Compliant (10 Substances) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spraying Angle θ (at 0.5MPa)(deg) | - | - | - | - | - | 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clean Washed ~ Low Dust Generation | Clean Washed ~ Low Dust Generation | Clean Washed ~ Low Dust Generation | Clean Washed ~ Low Dust Generation | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Air Source | - | - | - | - | Compressor | Compressor | - | Blower | Blower | Compressor | Compressor | - | Compressor | - | Compressor | - | Compressor | - | - | - | - | Compressor | - | - | - | - | - | - | - | - | - | - | - | - | Compressor | Compressor | Compressor | Blower |
| Material | Plastic | Brass | Stainless Steel / Brass | Plastic | Stainless Steel | Stainless Steel | Stainless Steel / Plastic | Aluminum / Plastic | Aluminum / Plastic | Aluminum | Stainless Steel | Aluminum | Aluminum | Aluminum | Aluminum | - | Aluminum | Aluminum | Plastic | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Brass | Brass | Plastic | Brass | Plastic | Plastic | Brass | Plastic | Stainless Steel / Brass | Plastic | Brass | Plastic | Plastic | Plastic | Plastic |
| Mounting Angle | - | - | - | - | - | - | - | Flat | - | Flat | Flat | - | - | - | Flat | - | Flat | 90° | - | - | - | Flat | - | - | - | - | - | - | - | - | - | - | - | - | - | Flat | Flat | Flat |
| Angle Adjustment | Angle Adjustable | - | Angle Adjustable | Angle Adjustable | - | - | - | - | - | Straight | Straight | - | - | - | - | - | - | - | - | Straight | Straight | - | - | Angle Adjustable / Straight | Angle Adjustable / Straight | Angle Adjustable | - | Angle Adjustable | Angle Adjustable | Angle Adjustable / Straight | Angle Adjustable | Angle Adjustable | Angle Adjustable | - | - | Straight | Straight | Straight |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | SUS304 | SUS304 | SUS304 | SUS304 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Blow Type | - | - | - | - | Standard | - | - | Expanded Width Type | Expanded Width Type | Expanded Width Type | Standard | - | Standard | - | Standard | - | Standard | - | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | Standard | Expanded Width Type | Expanded Width Type | Expanded Width Type |
| Type | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Air Nozzles | Air Nozzles | Related Components | Air Nozzles | Air Nozzles | Air Nozzles | Air Nozzles | Related Components | Air Nozzles | Related Components | Air Nozzles | - | Air Nozzles | Air Nozzles | Related Components | - | - | Air Nozzles | Related Components | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Insert Nozzle | Other Parts | Air Nozzles | Air Nozzles | Air Nozzles | Air Nozzles |
| Features | Movable Discharge Port | - | Movable Discharge Port | Movable Discharge Port | - | - | Movable Discharge Port | - | - | Mist | Movable Discharge Port | - | - | - | - | - | - | - | - | - | - | - | - | - | Movable Discharge Port | Movable Discharge Port | - | Movable Discharge Port | Movable Discharge Port | - | Movable Discharge Port | Movable Discharge Port | Movable Discharge Port | - | - | Mist | Mist | Mist |
| Applicable Fluid | Solution | - | Solution | Solution | Compressed Air | Compressed Air / Steam | - | Compressed Air | Compressed Air | Compressed Air | Compressed Air | - | Compressed Air | - | Compressed Air | - | - | - | - | - | - | Compressed Air | - | - | Solution | Solution | - | Solution | Solution | - | Solution | Solution | Solution | - | Compressed Air | Compressed Air | Compressed Air | Compressed Air |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Degreasing / Precision Cleaning | Precision Cleaning | Degreasing / Precision Cleaning | Degreasing / Precision Cleaning | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy