(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Insert（Page7）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
![[UNF] Recoil Kit with Tap EA949VH-4A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805384.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-4A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-1/4"-28
・No. of recoils-15 pcsStandard Price: MYR 439.93 Days to Ship: 5 Day(s) or more -
![[UNF] Recoil Kit with Tap EA949VH-5A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805395.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-5A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-5/16"-24
・No. of recoils-15 pcsStandard Price: MYR 439.93 Days to Ship: 5 Day(s) or more -
![[UNF] Recoil Kit with Tap EA949VH-6A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805407.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-6A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-3/8"-24
・No. of recoils-10 pcsStandard Price: MYR 637.52 Days to Ship: 9 Day(s) or more -
![[UNF] Recoil Kit with Tap EA949VH-7A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805418.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-7A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-7/16"-20
・No. of recoils-10 pcsStandard Price: MYR 637.52 Days to Ship: 5 Day(s) or more -
![[UNF] Recoil Kit with Tap EA949VH-8A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805429.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-8A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-1/2"-20
・No. of recoils-10 pcsStandard Price: MYR 637.52 Days to Ship: 5 Day(s) or more -
![[UNF] Recoil Kit with Tap EA949VH-9A](//my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805430.jpg?$product_view_b$)
[UNF] Recoil Kit with Tap EA949VH-9A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , recoil tap
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-5/8"-18
・No. of recoils-6 pcsStandard Price: MYR 979.44 Days to Ship: 9 Day(s) or more -
Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】
KSSC
Tangless insert screw.
[Features]
· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.
· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.
· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Standard Price: MYR 94.18- Days to Ship: 5 Day(s) or more -
Male Screw Repair Coil Thread -R【20 Pieces Per Package】
KSSC
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Standard Price: MYR 75.69 Days to Ship: 4 Day(s) or more -
SUNCO
[Nominal M]2,2.5,2.6,3,4,5,6,8,10 "Thread Type" metric (coarse) thread
Standard Price: MYR 1,123.81- Days to Ship: 5 Day(s) or more -
SUNCO
This is a dedicated driver used when extracting the Insert series that has been inserted from the workpiece. Only Insert can be extracted without damaging the workpiece.
Standard Price: MYR 339.47 Days to Ship: 9 Day(s) or more -
E-Sert Bending and Extracting Tool for M Threads
SUNCO
[Nominal M] 2.5, 2.6, 3, 3.5, 4, 5, 6, 7, 8, 10, 14, 16, 18, 22, 24, 27, 30, 33, 36, 39, 42, 52
[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 7/16, 1/2, 6/16, 5/8, 3/4, 1-8Standard Price: MYR 89.90- Days to Ship: 9 Day(s) or more -
SUNCO
Dedicated tool for steel threaded inserts.
[Features]
·Used when extracting an inserted E-sert (former heli-sert) from a tapped hole.
[Applications]
・ Dedicated tool for threaded inserts.Standard Price: MYR 112.38- Days to Ship: 9 Day(s) or more -
Sprue 2 pcs. Set Tap for M Thread
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
Standard Price: MYR 167.22- Days to Ship: 9 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5
Standard Price: MYR 241.33- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 105.19- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 98.55- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 354.90- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 198.12- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
Standard Price: MYR 111.64- Days to Ship: 9 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5, M22-1.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: MYR 134.97- Days to Ship: 9 Day(s) or more -
SUNCO
[Nominal M] 2, 2.5, 2.6, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 36
[Nominal W] #2-56, #4-40, #6-32, #8-32, #10-24, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1-8Standard Price: MYR 129.23- Days to Ship: 9 Day(s) or more -
SUNCO
It is used to extract the sprue from the base material female thread of the tap slot.
Standard Price: MYR 155.48- Days to Ship: 5 Day(s) or more -
Lock E-Sert【1-100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 2.5 2.6 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36Standard Price: MYR 3.32- Days to Ship: 5 Day(s) or more -
Lock E-Sert (Other Meshes)【100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 10 12 24 30 42Standard Price: MYR 380.75- Days to Ship: 9 Day(s) or more -
Lock E-Sert (Fine Mesh)【100 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 8 10 12 14 16 18 20 22 27 33 36 39Standard Price: MYR 325.68- Days to Ship: 5 Day(s) or more -
Lock Type Sprew【1-500 Pieces Per Package】
SUNCO
[Material] Stainless steel
[Thread size M] 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24Standard Price: MYR 6.96- Days to Ship: 5 Day(s) or more -
Lock Type Sprew (Other, Fine)【10 Pieces Per Package】
SUNCO
[Material] Stainless steel
[Thread size M] 10, 12, 24Standard Price: MYR 67.91 Days to Ship: 9 Day(s) or more -
Lock Type Sprew (Fine)【10 Pieces Per Package】
SUNCO
[Material] Stainless steel
[Thread size M] 10, 12, 14, 16, 18, 20, 22Standard Price: MYR 99.34 Days to Ship: 9 Day(s) or more -
Lock Recoil【500 Pieces Per Package】
SUNCO
[Material] Stainless Steel
[Thread Size M] 2.5 3 4 5 6 8 10 12 14 16 18 20 22 24Standard Price: MYR 3,056.77 Days to Ship: 5 Day(s) or more -
Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen platingStandard Price: MYR 4.40- Days to Ship: 11 Day(s) or more -
Brass Mini Bit Inserts / HMIB-Z
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7
[Usage Method] Press-fitting / Heated Press-fitting
[Compatible Resin] Thermoplastic
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing- Volume Discount
Standard Price: MYR 1.52- Days to Ship: 4 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.44- Days to Ship: 11 Day(s) or more -
Brass Ultrasert IV (Flanged) / HFU
HIROSUGI-KEIKI
[Nominal of Thread (M)] 3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingStandard Price: MYR 1.98- Days to Ship: 11 Day(s) or more -
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.5/3/4/5/6/8
Main Body
[Material] Nylon 66
[Color] Milky White
[Heat Warping Temperature] 1.82 MPa: 75°C
[UL Standard] UL94V-2 (Materials)
Screw Part
[Material] Aluminum (A2011 Equivalent)
[Processing] DegreasingStandard Price: MYR 1.62- Days to Ship: 11 Day(s) or more -
Tangless Insert Oversize Hand Tab
ACCURATE
Dedicated tangless insert tap. +0.03 mm larger than normal, making it especially effective for surface treated or resin products. It is a set of #2 and #3.
Standard Price: MYR 212.35- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 146.52- Days to Ship: 4 Day(s) or more -
Tangless Insert Oversize Spiral Tab
ACCURATE
Dedicated tangless insert tap. +0.03 mm larger than normal, making it especially effective for surface treated or resin products.
Standard Price: MYR 146.52- Days to Ship: 4 Day(s) or more -
Dedicated Electric Tool For Tangless Insert
ACCURATE
Uses a brushless motor for a light weight and long life.
Standard Price: MYR 4,052.69- Days to Ship: 4 Day(s) or more -
Tangless Insert Simple Tool for Extraction
ACCURATE
Large diameter tangless insert simple type removal tool. Ideal for small amounts of work.
Standard Price: MYR 1,199.87 Days to Ship: 6 Day(s) or more -
Recoil Tangless Insert (Nitronic 60)
RECOIL
Tangless insert that does not require lubricant oil.
[Features]
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
·Prevents screw galling (seizure) up to 425°C
[Applications]
·Applicable in a wide range of industries such as liquid crystal and semiconductor related productsStandard Price: MYR 10.45 Days to Ship: 12 Day(s) or more -
Recoil Tangless Insert (Phosphor Bronze)
RECOIL
Non-magnetic Tangless insert.
[Features]
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
·Electrical connection joint up to 300°C
[Applications]
·Use in the place where magnetic field should be avoided
·Use for digital measurement related equipmentStandard Price: MYR 2.76 Days to Ship: 12 Day(s) or more -
Recoil Tangless Insert Locking Type (SUS304), mm
RECOIL
Lock-type Tangless insert provides a detent effect for the bolt installed.
[Features]
·Stress is distributed over the entire length of fit, preventing the thread breakage and increasing the holding or tensile strength, which as a result, enhances the fastening force greater than the original screw
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
[Applications]
·Application example: Semiconductor equipment parts, air tools, industrial robots, etc.Standard Price: MYR 3.07- Days to Ship: 12 Day(s) or more
![[UNF] Recoil Kit with Tap EA949VH-4A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805384.jpg?$product_view_b$)
![[UNF] Recoil Kit with Tap EA949VH-5A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805395.jpg?$product_view_b$)
![[UNF] Recoil Kit with Tap EA949VH-6A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805407.jpg?$product_view_b$)
![[UNF] Recoil Kit with Tap EA949VH-7A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805418.jpg?$product_view_b$)
![[UNF] Recoil Kit with Tap EA949VH-8A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805429.jpg?$product_view_b$)
![[UNF] Recoil Kit with Tap EA949VH-9A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805430.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Environmentally friendly |
| Type |
| Characteristics/Applications |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | KSSC | KSSC | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | ACCURATE | ACCURATE | ACCURATE | ACCURATE | ACCURATE | RECOIL | RECOIL | RECOIL |
| Product Series | Screw Reinforcement Tangless Insert【10-20 Pieces Per Package】 | Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW | ||||||||||||||||||||||||||||||||||||||||
| CAD | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | - | - | - | - | - | - | 2 ～ 12 | 3 ～ 6 | 2 ～ 10 | - | 2.5 ～ 24 | 1 ～ 4 | 2 ～ 30 | 8 ～ 16 | 2 ～ 5 | 6 ～ 16 | 2.5 ～ 10 | - | 2 ～ 20 | 6 ～ 16 | 2 ～ 24 | 2 ～ 5 | 2.5 ～ 30 | 10 ～ 12 | 8 ～ 33 | 3 ～ 24 | 10 | 12 | 8 | 2.6 ～ 8 | 1.4 ～ 1.7 | 2.6 ～ 8 | 3 ～ 8 | 2.5 ～ 8 | - | - | - | - | - | - | - | - |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | - | - | - | - | - | - | Tangless | Standard | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Press Fit | Press Fit | Press Fit | Press Fit | Tool | Tool | Tool | Tool | Tool | Tangless | Tangless | Tangless |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | - | - | - | - | - | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Stainless Steel (SUS303/304) | Aluminum | Brass | Brass | Brass | Nylon | - | - | - | - | - | Nitrox 60 | Phosphor Bronze | Stainless Steel (SUS303/304) |
| Screw Type | - | - | - | - | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread / Unified (Coarse) Thread / Unified (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | - | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Length L (after insertion) (D = Thread Dia. M) | - | - | - | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D | 1.5D | 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1.5D / 2D | 1.5D / 2D / 2.5D | 1.5D / 2D / 2.5D | 2.5D / 3D | - | - | - | - | - | 1D | 1D | 2D |
| Application | - | - | - | - | - | - | Light Metal / Cast Iron / Resin General | Light Metal / Cast Iron / Resin General | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Light Metal | Light Metal | Light Metal | Light Metal | Resin General | - | - | - | - | - | Light Metal | Light Metal | Light Metal |
| Notch | - | - | - | - | - | - | Provided | Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | Provided | Provided | Provided |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | #4-40 | - | - | - | - | - | - | 1/4 ～ #10-24 | - | - | 1/2 ～ #10-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | - | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | Standard | Standard | Standard |
| Sales Unit | - | - | - | - | - | - | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) / Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | - | - | - | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[UNF] Recoil Kit with Tap EA949VH-4A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805384.jpg?$product_view_c$)
![[UNF] Recoil Kit with Tap EA949VH-5A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805395.jpg?$product_view_c$)
![[UNF] Recoil Kit with Tap EA949VH-6A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805407.jpg?$product_view_c$)
![[UNF] Recoil Kit with Tap EA949VH-7A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805418.jpg?$product_view_c$)
![[UNF] Recoil Kit with Tap EA949VH-8A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805429.jpg?$product_view_c$)
![[UNF] Recoil Kit with Tap EA949VH-9A](http://my.misumi-ec.com/linked/material/mech/ESC1/PHOTO/221005805430.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Environmentally friendly
-
Type
-
Characteristics/Applications
-
Material
-
Screw Type
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
-
Cleaning Method
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Insert
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy