(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Flexible Flanged
| Days to Ship |
|
|---|
-
Flange Flexibility Axis Joint FCL/FCLS
NABEYA BI-TECH
The most popular flexible shaft coupling used in Japan that complies with the JIS standard.
[Features]
· The most popular flexible shaft coupling used in Japan that complies with the JISB1452-1991 "Flange shape flexible shaft coupling."
· A flexible structure that is made through combining a flange with a coupling bolt.
· Easy to attach.
· Easy to replace the bush by just removing the coupling bolt, which makes maintenance and preservation easy.
· Absorbs misalignment such as eccentricity and declination, and absorbs screw vibrations to prevent noise.
· Does not transmit the thrust load.
· There are two types, namely the FCL cast iron type and the FCLS carbon steel type.Standard Price: MYR 309.54- Days to Ship: 5 Day(s) or more -
Rigid Flanged Shaft Coupling KCL/KCLS
NABEYA BI-TECH
[Features]
· A shaft coupling with a solid type structure that is based on the JISB1451-1991 "Flange shape fixating axial coupling."
· Can match the set mark on the flange outer peripheral face, and can be easily assembled by just tightening the reamer bolt.
· There are two types, namely the cast iron type and the carbon steel type.Standard Price: MYR 409.20- Days to Ship: 8 Day(s) or more -
Bolt (with Anti-Vibration Rubber) EA969GB-3
ESCO
【Product Specifications】
・Material-Cast iron
・JISB1452-1991
・Easy maintenance and service since you just need to remove the joint bolt to replace the bush.
・Bolt-M12
・Applicable code-EA969GA-4/-7Standard Price: MYR 70.23 Days to Ship: 9 Day(s) or more -
SNS Flange Type Flexible Shaft Fitting, Rubber Bushing
KANEMITSU
The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.
Standard Price: MYR 7.66- Days to Ship: 4 Day(s) or more -
SNS Flange Shape Flexible Shaft Fitting Parts Set
KANEMITSU
The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.
Standard Price: MYR 22.01- Days to Ship: 4 Day(s) or more -
![SNS Flange Shape Flexible Shaft Fitting [CL]](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957448_002.jpg?$product_view_b$)
SNS Flange Shape Flexible Shaft Fitting [CL]
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
[Features]
· Compliant with JIS B 1452.
· Compatible with nominal diameters of between ø90 and ø630.
· Material FC200Standard Price: MYR 278.95- Days to Ship: 4 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.Standard Price: MYR 218.44 Days to Ship: 8 Day(s) or more -
KAYSEVEN
A product that absorbs eccentricity, has no reaction force, and does not require eccentric alignment. Used with various types of pumps, blowers, agitators, NC and MC manufacturing machinery, and machinery used in the textile, agriculture, construction, and mining industries.
Standard Price: MYR 158.45- Days to Ship: 6 Day(s) or more -
SNS Flange Type Fixed Bearing Shaft Fitting Bolt
KANEMITSU
Bolt and nut is made of SS400, and spring lock washer, SWRH62.
Standard Price: MYR 17.48- Days to Ship: 8 Day(s) or more -
![SNS Flexible Flanged Shaft Fittng [BCL]](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957426_002.jpg?$product_view_b$)
SNS Flexible Flanged Shaft Fittng [BCL]
KANEMITSU
JIS B1452 standard. This series is compatible with large type electric motor shafts with a nominal diameter of between ø160 and ø 315. Has benefits such as being able to have a large axial hole diameter relative to the transmitted torque. Material FC200
Standard Price: MYR 847.15- Days to Ship: 8 Day(s) or more -
![SNS flange type flexible joint [BCL] (motor mounting side)](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957437_002.jpg?$product_view_b$)
SNS flange type flexible joint [BCL] (motor mounting side)
KANEMITSU
JIS B1452 standard. This series is compatible with large type electric motor shafts with a nominal diameter of between ø160 and ø 315. Has benefits such as being able to have a large axial hole diameter relative to the transmitted torque. Material FC200
Standard Price: MYR 354.15- Days to Ship: 8 Day(s) or more -
![SNS flange type flexible joint [CL] (motor mounting side)](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957459_002.jpg?$product_view_b$)
SNS flange type flexible joint [CL] (motor mounting side)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
Standard Price: MYR 107.11- Days to Ship: 4 Day(s) or more -
![SNS flange shape flexible shaft fitting [CL] (Side mounting a pump)](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957460_002.jpg?$product_view_b$)
SNS flange shape flexible shaft fitting [CL] (Side mounting a pump)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
Standard Price: MYR 107.11- Days to Ship: 4 Day(s) or more -
![SNS Flange Type Fixed Bearing Shaft Fitting [SRCL]](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957471_002.jpg?$product_view_b$)
SNS Flange Type Fixed Bearing Shaft Fitting [SRCL]
KANEMITSU
Compatible with use in high ranges of circumferential speeds. Standardized in nominal diameters of ø112 to ø355. A forged product that uses S35C as the material
Standard Price: MYR 1,244.02- Days to Ship: 8 Day(s) or more -
![SNS Flange Shape Flexible Shaft Fitting [SCL]](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957482_002.jpg?$product_view_b$)
SNS Flange Shape Flexible Shaft Fitting [SCL]
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· 1. Smoothly transmits the power from the shaft.
· 2. Does not transmit the machine vibration or shaft vibration to the other side.
· 3. Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· 4. The rotary shaft can be turned by hand from the outer side while being directly connected.
· 5. The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· 6. Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.
· * A simple structure that provides complete flexibility.
· The structure is comprised of a coupler body, coupler bolt, and rubber bushes which make it extremely easy to attach and remove.
· The rubber bushes are made of polymer materials and have flexibility, vibration resistance, and complete flexibility.
· * Has compatibility that is demanded anywhere at anytimeStandard Price: MYR 929.27- Days to Ship: 7 Day(s) or more -
](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957493_002.jpg?$product_view_b$)
SNS flange type flexibility shaft fitting[SCL](pump mount side)
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· Smoothly transmits the power from the shaft.
· Does not transmit the machine vibration or shaft vibration to the other side.
· Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· The rotary shaft can be turned by hand from the outer side while being directly connected.
· The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.Standard Price: MYR 386.98- Days to Ship: 7 Day(s) or more -
SNS flange flexibility shaft fitting[SCL\ (motor mount side)
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· Smoothly transmits the power from the shaft.
· Does not transmit the machine vibration or shaft vibration to the other side.
· Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· The rotary shaft can be turned by hand from the outer side while being directly connected.
· The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.Standard Price: MYR 386.98- Days to Ship: 7 Day(s) or more -
![SNS Flange Shape Fixating Shaft Fitting [RCL]](//my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957516_002.jpg?$product_view_b$)
SNS Flange Shape Fixating Shaft Fitting [RCL]
KANEMITSU
JIS B1451 standard. Has the same outer diameter size as the flexible shaft coupling but with a higher transmission capacity, and it can be reliably connected using a bolt. A line up with a nominal diameter of ø112 to ø560, and uses FC200 as the material
Standard Price: MYR 344.19- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 109.89 Days to Ship: 4 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.Standard Price: MYR 117.41 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 153.53 Days to Ship: 8 Day(s) or more -
Standard Price: MYR 268.32 Days to Ship: 8 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
Standard Price: MYR 461.18 Days to Ship: 7 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·Standard Price: MYR 532.92 Days to Ship: 7 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
Standard Price: MYR 822.17 Days to Ship: 7 Day(s) or more -
KANEMITSU
[Features]·Shaft hole/keyway machining is not required. ·For light loads, keyless use is OK. ·Dimensions in mm
Standard Price: MYR 1,134.38 Days to Ship: 7 Day(s) or more -
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.Standard Price: MYR 1,272.12 Days to Ship: 7 Day(s) or more -
KANEMITSU
[Features]·Shaft hole/keyway machining is not required. ·For light loads, keyless use is OK. ·Dimensions in mm
Standard Price: MYR 4,002.38 Days to Ship: 7 Day(s) or more -
KANEMITSU
[Features]·Shaft hole/keyway machining is not required. ·For light loads, keyless use is OK. ·Dimensions in mm
Standard Price: MYR 7,567.14 Days to Ship: 7 Day(s) or more -
Bolt (with Anti-Vibration Rubber) EA969GB-1
ESCO
【Product Specifications】
・Material-Cast iron
・JISB1452-1991
・Easy maintenance and service since you just need to remove the joint bolt to replace the bush.
・Bolt-M8
・Applicable code-EA969GA-1Standard Price: MYR 40.88 Days to Ship: 9 Day(s) or more
![SNS Flange Shape Flexible Shaft Fitting [CL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957448_002.jpg?$product_view_b$)
![SNS Flexible Flanged Shaft Fittng [BCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957426_002.jpg?$product_view_b$)
![SNS flange type flexible joint [BCL] (motor mounting side)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957437_002.jpg?$product_view_b$)
![SNS flange type flexible joint [CL] (motor mounting side)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957459_002.jpg?$product_view_b$)
![SNS flange shape flexible shaft fitting [CL] (Side mounting a pump)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957460_002.jpg?$product_view_b$)
![SNS Flange Type Fixed Bearing Shaft Fitting [SRCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957471_002.jpg?$product_view_b$)
![SNS Flange Shape Flexible Shaft Fitting [SCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957482_002.jpg?$product_view_b$)
](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957493_002.jpg?$product_view_b$)
![SNS Flange Shape Fixating Shaft Fitting [RCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957516_002.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Allowable Torque Range(N·m) |
| Max. Rotational Speed Range(r/min) |
| O.D. A(φ) |
| Overall Length W(mm) |
| Feature |
| Main Body Material |
| Type |
| Allowable Torque(N·m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
| Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA BI-TECH | NABEYA BI-TECH | ESCO | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KAYSEVEN | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | ESCO |
| Product Series | SNS flange shape flexible shaft fitting [CL] (Side mounting a pump) | SNS flange type flexibility shaft fitting[SCL](pump mount side) | SNS flange flexibility shaft fitting[SCL\ (motor mount side) | |||||||||||||||||||||||||||
| CAD |
|
| ||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more |
| Allowable Torque Range(N·m) | - | - | - | - | - | 3.01 ~ 5.00 ～ 10000 to Less than 20000 | - | 50.01 ~ 100.00 ～ 1000 to Less than 5000 | - | 100 to Less than 500 ～ 1000 to Less than 5000 | 100 to Less than 500 ～ 1000 to Less than 5000 | 3.01 ~ 5.00 ～ 5000 to Less than 10000 | 3.01 ~ 5.00 ～ 10000 to Less than 20000 | 50.01 ~ 100.00 ～ 1000 to Less than 5000 | 10.01 ~ 20.00 ～ 10000 to Less than 20000 | 10.01 ~ 20.00 ～ 10000 to Less than 20000 | 10.01 ~ 20.00 ～ 10000 to Less than 20000 | 50.01 ~ 100.00 ～ 20000 to Less than 50000 | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Rotational Speed Range(r/min) | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | - | - | - | 1,001 to 2,000 ～ 2001 to 4,000 | - | 4,001 to 10,000 ～ 2001 to 4,000 | - | 2001 to 4,000 | 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 4,001 to 10,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. A(φ) | 90 ～ 800 | 100 ～ 450 | - | - | - | 90 ～ 630 | - | 125 ～ 280 | - | 160 ～ 315 | 160 ～ 315 | 90 ～ 560 | 90 ～ 630 | 112 ～ 355 | 112 ～ 630 | 112 ～ 630 | 112 ～ 630 | 112 ～ 560 | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length W(mm) | 59 ～ 537 | 71 ～ 280 | - | - | - | 59 ～ 365 | - | 93 ～ 204 | - | 112 ～ 224 | 56 ～ 112 | 28 ～ 160 | 28 ～ 180 | 80 ～ 250 | 83 ～ 365 | 40 ～ 180 | 40 ～ 180 | 80 ～ 500 | - | - | - | - | - | - | - | - | - | - | - | - |
| Feature | Vibration Insulation | - | - | - | - | Unfinished Shaft Bore | - | Vibration Insulation | - | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | Unfinished Shaft Bore | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Steel | Steel | - | Resin | Steel | Steel | Steel | Resin ～ Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - |
| Type | Main Body | Main Body | - | Related Components | Related Components | Main Body | Related Components | Main Body | Related Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | Related Components | - |
| Allowable Torque(N·m) | - | - | - | - | - | 3.9 ～ 15686.3 | - | 83 ～ 1240 | - | 109.8 ～ 1568.6 | 109.8 ～ 1568.6 | 3.9 ～ 9803.9 | 3.9 ～ 15686.3 | 78.4 ～ 4902 | 15.7 ～ 15686.3 | 15.7 ～ 15686.3 | 15.7 ～ 15686.3 | 61.8 ～ 30882.4 | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Rotational Speed(r/min) | 800 ～ 6000 | 1600 ～ 6000 | - | - | - | 1000 ～ 4000 | - | 2600 ～ 4600 | - | 2050 ～ 4000 | 2050 ～ 4000 | 1150 ～ 4000 | 1000 ～ 4000 | 3000 ～ 6000 | 1500 ～ 6000 | 1500 ～ 6000 | 1500 ～ 6000 | 1100 ～ 4000 | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment Range(mm) | 0.02 ~ 0.2 ～ 0.21 ~ 0.40 | - | - | - | - | 0.02 ~ 0.2 | - | - | - | 0.02 ~ 0.2 | - | - | - | 0.02 ~ 0.2 | 0.02 ~ 0.2 | - | - | 0.02 ~ 0.2 | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | 0.1 ～ 0.3 | - | - | - | - | 0.05 ～ 0.1 | - | - | - | 0.05 | - | - | - | 0.05 | 0.05 ～ 0.1 | - | - | 0.05 ～ 0.1 | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | 1/6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - |
![SNS Flange Shape Flexible Shaft Fitting [CL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957448_002.jpg?$product_view_c$)
![SNS Flexible Flanged Shaft Fittng [BCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957426_002.jpg?$product_view_c$)
![SNS flange type flexible joint [BCL] (motor mounting side)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957437_002.jpg?$product_view_c$)
![SNS flange type flexible joint [CL] (motor mounting side)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957459_002.jpg?$product_view_c$)
![SNS flange shape flexible shaft fitting [CL] (Side mounting a pump)](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957460_002.jpg?$product_view_c$)
![SNS Flange Type Fixed Bearing Shaft Fitting [SRCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957471_002.jpg?$product_view_c$)
![SNS Flange Shape Flexible Shaft Fitting [SCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957482_002.jpg?$product_view_c$)
](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957493_002.jpg?$product_view_c$)
![SNS Flange Shape Fixating Shaft Fitting [RCL]](http://my.misumi-ec.com/linked/material/mech/INT1/PHOTO/221004957516_002.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Allowable Torque Range(N·m)
-
Max. Rotational Speed Range(r/min)
-
O.D. A(φ)
-
Overall Length W(mm)
-
Feature
-
Main Body Material
-
Type
-
Allowable Torque(N·m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
-
Application
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy