(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
UNION TOOL Long Neck Ball End Mills (Carbide)
| Days to Ship |
|
|---|
-
CFLB, UT Coat 3-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Provides amazing high feed compared to the conventional 2-flute long neck ball.
· With new UTCOAT, outstanding lubricity and long life are achieved.
· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
· O.D. Tolerance: 0/-0.02Standard Price: MYR 185.80- Days to Ship: 5 Day(s) or more -
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Significantly enhances machining efficiency.
· The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
· With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
· Reasonable price setting
· Has 4 flutes but is still cheaper than 3-flute types from other companiesStandard Price: MYR 197.80- Days to Ship: 6 Day(s) or more -
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.Standard Price: MYR 121.09- Days to Ship: 7 Day(s) or more -
CBN-LBF 2-Flute High Grade Long-Neck Ball
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.003 mmStandard Price: MYR 782.33- Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 102.60- Days to Ship: 7 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 113.12- Days to Ship: 7 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 408.93- Days to Ship: 7 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applicationsStandard Price: MYR 109.61- Days to Ship: 7 Day(s) or more -
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
[Features]
· Supports Shrink Fit Holders
· Suppresses unnecessary tool protrusion to enable higher precision processing
· Reduces processes in cutting
· Increases machining efficiency through combination with shrink fit holder.Standard Price: MYR 203.10- Days to Ship: 5 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cutStandard Price: MYR 222.50- Days to Ship: 5 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product lifeStandard Price: MYR 560.03- Days to Ship: 5 Day(s) or more -
DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product lifeStandard Price: MYR 382.44- Days to Ship: 6 Day(s) or more -
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]
UNION TOOL
[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.Standard Price: MYR 444.56- Days to Ship: 10 Day(s) -
CPRB 2-Flute Long Neck Ball End Mill for Resin Machining
UNION TOOL
[Features]
· Long Neck Ball End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck partStandard Price: MYR 180.20- Days to Ship: 5 Day(s) or more -
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]
· 3-flute type achieves remarkably high feed. Shortens the roughing time
· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
· Designed with 3-flute variable split to suppress chatter.
· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)Standard Price: MYR 191.74- Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Ball-end mill for cemented carbide / hard brittle material machining
· Diamond coating for cemented carbide machining realizes outstanding hardness, toughness and adhesive strength
· Phenomenal "deep" cutting is enabled through adoption of an ideal blade shape.
· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machiningStandard Price: MYR 1,102.91- Days to Ship: 10 Day(s) -
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.Standard Price: MYR 111.98- Days to Ship: 6 Day(s) or more -
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 100.50- Days to Ship: 7 Day(s) or more -
UNION TOOL
[Features]
· Diamond coating for cemented carbide machining has outstanding hardness, toughness and adhesive strength.
· Phenomenal deep cutting has been achieved through adoption of a blade shape optimized for cemented carbide.
· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.
[Material]
· Ultrafine particle alloy (MG)Standard Price: MYR 1,119.97- Days to Ship: 10 Day(s) -
Union Tool, Carbide 2-Blade, Ball End Mill UDCLB F
UNION TOOL
[Features]
· Long-neck ball-end mill that can cut cemented carbide and hard brittle material. (UDCLB top grade version)
· Blade shape and diamond coating are newly improved and processing removal volume is greatly increased.
· The groove provided at the tip of the ball provides an outstanding finished surface.
· Special finish is given to the cutting edge to suppress chipping and step difference to the utmost. It supports a wide range of applications from semi-roughing to finishing.
[Material]
· Carbide ultra-fine particle alloy (Super MG)Standard Price: MYR 1,343.48- Days to Ship: 8 Day(s) or more -
CBN-LBSF 2-Flute Super Finishing Long-Neck Ball End Mill
UNION TOOL
[Features]
· Uses CBN materials (ideal for machining high hardness materials) and features an improved blade shape for high precision and a long service life.
· Excellent abrasion and chipping resistance, ensuring a good machining surface roughness and precision, even when machining for long periods.
· Shank diameter tolerance: 0/-0.004 mm
· Ball radius accuracy: With nominal radius as a base ±0.002 mmStandard Price: MYR 844.11- Days to Ship: 5 Day(s) or more
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_b$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL |
| Product Series | HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product] | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball | DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill | CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | |||||||||||||||
| Days to Ship | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 5 Day(s) or more |
| R Size(mm) | 0.3 ～ 3 | 1 ～ 6 | R0.05 ～ R6 | 0.15 ～ 0.5 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 1 ～ 6 | 0.1 ～ 2 | 0.5 ～ 6 | 0.2 ～ 3 | 1 ～ 6 | 0.2 ～ 3 | 0.3 ～ 6 | 0.1 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | R0.1 ～ R3 | R0.3 ～ R1 | 0.3 ～ 1 |
| Blade length (ℓ)(mm) | 0.48 ～ 4.8 | 3 ～ 18 | 0.1 ～ 22 | 0.16 ～ 0.7 | 0.06 ～ 15 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 3 ～ 18 | 0.16 ～ 50 | 5 ～ 55 | 0.32 ～ 6 | 10 ～ 55 | 0.4 ～ 6 | 0.9 ～ 18 | 0.14 ～ 4.2 | 0.08 ～ 4.8 | 0.08 ～ 4.8 | 0.14 ～ 4.2 | 0.42 ～ 1.4 | 0.48 ～ 1.2 |
| Underneck length (ℓ1)(mm) | 2 ～ 40 | - | - | 0.9 ～ 10 | - | - | - | 3 ～ 30 | - | 1.5 ～ 62 | - | 2 ～ 80 | - | 1 ～ 50 | - | - | 0.3 ～ 60 | 0.3 ～ 60 | 0.1 ～ 15 | 1 ～ 20 | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 | 4 |
| Number of flutes(sheet) | 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | - | - | 2 |
| Overall Length (L)(mm) | 50 ～ 90 | 50 ～ 110 | 50 ～ 110 | 50 | 50 ～ 100 | 50 | 80 ～ 200 | 45 ～ 80 | 40 ～ 60 | 4 ～ 120 | 60 ～ 180 | 45 ～ 120 | 70 ～ 200 | 45 ～ 120 | 50 ～ 120 | 50 ～ 60 | 45 ～ 120 | 45 ～ 120 | 50 ～ 60 | 50 ～ 60 | 50 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | - | - | Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] |
| R Precision(μm) | -0.007～0.007 ～ -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | ±3 | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 | -0.005～0.005 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 | -0.005～0.005 ～ -0.002～0.002 | -0.005～0.005 ～ -0.002～0.002 | - | - | ±2 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | - | - | - |
| Coating | TiCN | For High Hardness (Silicon Group) | TiCN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | Dia Coat | Dia Coat | Non-Coated | Non-Coated | TiCN | Other | TiCN | For High Hardness (Silicon Group) | - | - | Non-Coated |
| Type | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Tapered neck ball | Ball | Long-Neck Ball | Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball |
![HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439182.jpg?$product_view_c$)
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
![CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439485.jpg?$product_view_c$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.03
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.35
- 0.4
- R0.4
- 0.45
- 0.5
- R0.5
- 0.55
- 0.6
- 0.65
- R0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- R0.9
- 0.95
- 1
- R1
- 1.25
- R1.25
- 1.5
- R1.5
- 1.75
- R1.75
- 2
- R2
- 2.25
- R2.25
- 2.5
- R2.5
- 2.75
- R2.75
- 3
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5.25
- 5.5
- R5.5
- 5.75
- 6
- R6
- 8
- 10
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.7
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.3
- 5
- 5.2
- 5.3
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9
-
10～10.5
- 10
- 10.5
-
11
-
12
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16.5
-
18
-
20
-
22
-
25
-
30
-
35
-
38
-
40
-
45
-
50
-
55
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- MISUMI (11)
- UNION TOOL (21)
- OSG (13)
- NS TOOL (12)
- EIKOSHA (4)
- 7 LEADERS (2)
- NACHI (2)
- SANDVIK (2)
- KYOWA SEIKO (1)
CAD
-
- 2D
- 3D
Related Categories to Long Neck Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy