(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SMC Rotary Actuators（Allowable Kinetic Energy：0.1 to Less Than 1）
| Days to Ship |
|
|---|
-
Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up)
SMC
SMC Rotary Actuator
[Features]
· Easy mounting of workpiece
· Large rolling element bearings
· Angle adjustment range: 0 to 190°
· Easy mounting of body
· Movement in direction of table's radial thrust: 0.01 mm or less
· End face and side piping possibleStandard Price: MYR 2,385.44- Days to Ship: 3 Day(s) or more -
CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type
SMC
A rotary actuator that can be mounted according to the operating conditions.
[Features]
· Compact auto switches are mountable (D-M9□).
· The cushion seal is replaceable.
· Easy adjustment of the cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Many variations of shaft type.
· Angle can be adjusted to the desired level in a range of up to 90°.
· CRA1: basic type / CDRA1: with auto switch.
· Size: 50, 63, 80, 100.Standard Price: MYR 2,046.26- Days to Ship: 24 Day(s) or more -
Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series
SMC
[Features]
· Uses internal cushioning.
· The main body can also serve as a flange.
· With angle adjustment mechanism (each rotation end ±5°).
· 360° rotating angle type.
· Piping can be installed from one end.
· 2 auto switches can be mounted on the same side (mountable on both sides).
· A double piston design free from backlash.
· Shaft type: Supports both single and double shafts.
· Centering is easy when mounting the body.Days to Ship: 3 Day(s) or more -
Rotary Actuator, Vane Type, CRB1 Series
SMC
[Features]
· Works with the model D-M9□ compact auto switch.
· Highly reliable.
· Supports thrust and radial loads and uses bearings.
· The body can be mounted directly.
· 2 types of port location; side ported or axial ported.Standard Price: MYR 923.50- Days to Ship: 3 Day(s) or more -
Rotary Table, Rack And Pinion Type, CRA1 Series
SMC
[Features]
· The model D-M9□ compact auto switch can be equipped.
· Overall width reduced by up to 14 mm.
· Mountable on 2 surfaces.
· Auto switch can be mounted from the front.
· Weight reduced by up to 14%.
· Mounting compatibility with existing models.
· The cushion seal is replaceable.
· Easy adjustment of the cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Many variations of shaft type.
· Can be mounted in a way that is suitable for the operating conditions/environment.Days to Ship: 9 Day(s) or more -
Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroomStandard Price: MYR 1,906.12- Days to Ship: 27 Day(s) or more -
Rotary Table, Rack and Pinion Type, Clean and Low Dust Generation 11-/20-/22-MSQ Series
SMC
[11-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[20-series Copper-Free/Fluorine-Free Specifications]
・ It can be used in environments where copper and fluorine materials should be avoided
・ External dimensions are the same as standard products
[22-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Days to Ship: 3 Day(s) or more -
CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type
SMC
Solenoid valve and rotation speed adjustment function are integrated.
[Features]
· Compact auto switches are mountable (D-M9□).
· Replaceable cushion seal, easy adjustment of cushion valve.
· The ports, cushion valve and auto switch are all located on the same surface for improved usability.
· Numerous shaft shape variations allow mounting to suit the operating conditions.
· Part number is set for the angle adjustable type.
· CVRA1: basic type / CDVRA1: with auto switch.
· Size: 50, 63, 80, 100.Standard Price: MYR 2,562.23- Days to Ship: 27 Day(s) or more -
Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50
SMC
By shortening the effective stroke of the shock absorber, absorption time is shortened, making it possible to improve the takt time.
[Features]
· 4 to 10 times more allowable kinetic energy.
· 2 types of shock absorber are available, for low energy and high energy.
· Reduced overall length.
· There are no protrusions from the adjusting bolts or internal shock absorbers, reducing the longitudinal mounting space.
· The table height is the same for both types (types with adjustment bolts and types with internal shock absorber).Days to Ship: 3 Day(s) or more -
Rotary Table, Rack and Pinion Type, Rechargeable Battery Compatible 25A-MSQ Series
SMC
[Rechargeable battery compatible series]
Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.Standard Price: MYR 2,346.50- Days to Ship: 27 Day(s) or more -
ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: Quote -
Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series
SMC
Rotary actuator with solenoid valve.
[Features]
·2 types of port positions, body side and axial direction
·Mounting method: Direct mounting / foot type mounting
·Auto switch: None (no symbol), with auto switch (D)
·Size: 50, 63, 80, 100
·Vane type: Single vane, double vane
·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°Days to Ship: 27 Day(s) or more -
Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series
SMC
[10-Series Clean Series]
・ This product can be used in a clean environment
・ Prevents dust generation in the cleanroom
[21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)Standard Price: MYR 2,346.10- Days to Ship: 27 Day(s) or more -
ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: 21 Day(s) or more -
ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series
SMC
[What is the ATEX directive?]
Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
■CE mark and ATEX
The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
■Purpose of ATEX Directive
The main purposes of ATEX are:
・ Prevention of static charge
・ Ignition prevention of sparks caused by friction, impact, and wear
・ Ignition prevention due to temperature rise due to the same as above
・ The responsibility lies with the manufacturer
・ Certification by zone/category
■Zone / category division
In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
・ Zone 0: Category 1
Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
・ Zone 1: Category 2
Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
・ Zone 2: Category 3
Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/yearDays to Ship: 27 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Main Body Shape |
| Oscillation Angle A |
| Torque(N･m) |
| Operation Method |
| Environment, Applications |
| Rigidity, Accuracy |
| Tube Nominal Dia. |
| Valves |
| Allowable Kinetic Energy(J) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC | SMC |
| Product Series | Rotary Table, Rack And Pinion Type, MSQ Series (Size 10 And Up) | CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type | Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series | Rotary Table, Rack and Pinion Type, Clean and Low Dust Generation 11-/20-/22-MSQ Series | CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type | Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50 | Rotary Table, Rack and Pinion Type, Rechargeable Battery Compatible 25A-MSQ Series | ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3 | Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series | Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series | ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2 | ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series | |||
| CAD |
|
|
|
|
|
|
|
| |||||||
| Days to Ship | 3 Day(s) or more | 24 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 3 Day(s) or more | 27 Day(s) or more | 3 Day(s) or more | 27 Day(s) or more | Quote | 27 Day(s) or more | 27 Day(s) or more | 21 Day(s) or more | 27 Day(s) or more |
| Type | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Table 2-point Stop | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Table 2-point Stop | Rotary Table 2-point Stop | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator Both Sides Shaft Outputs | Rotary Actuator One Side Shaft Output / Rotary Actuator Both Sides Shaft Outputs |
| Main Body Shape | Block Shape | Block Shape | Block Shape | Round Shape / Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Block Shape | Round Shape | Block Shape | Round Shape | Round Shape | Block Shape |
| Oscillation Angle A | 190° / Arbitrary Setting Type | 90° / 100° / 180° / 190° | 90° / 180° / 360° | 90° / 100° / 180° / 190° / 270° / 280° | 90° / 100° / 180° / 190° | 90° / 100° / 180° / 190° | 190° | 90° / 100° / 180° / 190° | 90° / 180° | 190° | 90° / 100° / 180° | 90° / 100° / 180° / 190° / 270° / 280° / 135° | 90° / 100° / 180° / 270° | 90° / 100° / 180° / 270° | 90° / 180° |
| Torque(N･m) | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | 1 to Less Than 3 / 3 ~ Less than 6 | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 | - | 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 | - | 20 to Less Than 50 / 50 to Less Than 100 | 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | Less than 1 / 1 to Less Than 3 / 3 ~ Less than 6 / 6 to Less Than 10 / 10 ~ Less than 20 / 20 to Less Than 50 | 20 to Less Than 50 / 50 to Less Than 100 / 100 ~ | 1 to Less Than 3 / 3 ~ Less than 6 |
| Operation Method | Double Rack | Single Rack | Single Rack / Double Rack | Single Vane / Double Vane | Single Rack | Single Rack | Double Rack | Single Rack | Single Rack / Double Rack | Double Rack | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Single Vane / Double Vane | Double Rack |
| Environment, Applications | Standard | Standard / Heat Resistant | Standard | Standard | Standard / Heat Resistant | Cleanroom | Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) / Cleanroom | Standard | Standard / Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported) | Standard | Standard | Standard | Cleanroom | Standard | Standard |
| Rigidity, Accuracy | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard / High Rigidity, High Accuracy | Standard | Standard | Standard | Standard | Standard | Standard |
| Tube Nominal Dia. | 18 ～ Φ40 | 63 ～ 100 | 20 ～ 40 | 50 ～ 100 | 30 ～ 100 | - | ø18 ～ ø40 | 50 ～ 100 | 10 ～ 30 | ø21 ～ ø32 | - | 50 ～ 100 | - | - | - |
| Valves | N/A | N/A | N/A / Provided | N/A | N/A / Provided | N/A | N/A | Provided | N/A | N/A | N/A | N/A / Provided | N/A | N/A | N/A |
| Allowable Kinetic Energy(J) | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 | 0.1 to Less Than 1 |
Loading...
Configure
Specification/Dimensions
-
Type
-
Main Body Shape
-
Oscillation Angle A
-
Torque(N･m)
- Less than 1
- 1 to Less Than 3
- 3 ~ Less than 6
- 6 to Less Than 10
- 10 ~ Less than 20
- 20 to Less Than 50
- 50 to Less Than 100
- 100 ~
There might be logical torque values. Please refer to technical data of each manufacturer for details
-
Operation Method
-
Environment, Applications
- Standard
- Slow Speed
- High-Speed
- Heat Resistant
- Copper-Based / fluoropolymer-Based Material Not Used (Partially Platting Supported)
- Cleanroom
-
Rigidity, Accuracy
-
Tube Nominal Dia.
-
Valves
-
Allowable Kinetic Energy(J)
Narrow search by specifying Manufacturer
-
- SMC (15)
- KOGANEI (1)
- PARKERKURODA (1)
- FESTO (0)
- ORIENTAL MOTOR (0)
- CKD (0)
CAD
-
- 2D
- 3D
Related Categories to Rotary Actuators
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy