(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SANPLATEC Liquid Feeder Equipment
| Days to Ship |
|
|---|
-
SANPLATEC
[Features]
· A connector for common sliding glass joint equipment connections.
· Convenient for angle correction during assembly.
· Maximum bending angle is about 120°.
· A seal ring that increases medium/high vacuum performance is attached to the bottom part.Standard Price: MYR 528.29- Days to Ship: 29 Day(s) -
Flowell Joint 30 Series, Bore-Through Connector
SANPLATEC
[Features]
· A fluororesin-made bore through connector.
· For attaching a chemical solution discharge port or attaching a temperature sensor when pumping chemical solutions.Standard Price: MYR 256.83 Days to Ship: 11 Day(s) -
PFA Flexible Tubes (Pennchem®CT)
SANPLATEC
[Features]
· Can be used at up to 150°C (maximum).
· Fluororesin PFA has relatively superior chemical resistance and stress cracking performance among high-functioning resins.
· Since fluororesin PFA is scientifically inert, it does not easily contaminate fluids.
· Nearly transparent, the fluid in the tube is visible.
· The corrugated portion is annual (single peak).
· The length of the corrugated portion can be shrunk to about 50% and extended to about 140%
· Bending radius is small (about 1/4 of the inner diameter), and bending hardly changes the inner diameter.
· Bending radius is smaller in comparison to helical (spiral) corrugated tubes and has excellent piping flexibility.Standard Price: MYR 430.79- Days to Ship: 15 Day(s) or more -
Flowell Joint 30 Series, Union Branch T
SANPLATEC
[Features]
· A fluororesin-made union branch tee.
· The main body is PTFE-made and the nut part is ECTFE-made.Standard Price: MYR 205.40- Days to Ship: 34 Day(s) -
Clean Pack PFA Tube (10 m Roll)
SANPLATEC
[Features]
· A PFA tube washed with pure water (cleanliness: class 1,000) in a clean room and doubly packed under an environment of class 100 or less.Standard Price: MYR 1,836.98- Days to Ship: 20 Day(s) or more -
SANPLATEC
[Features]
· Excellent heat and cold resistance.
· Inert with respect to most chemicals and solvents.
· Excellent weather resistance and no aging.
· Most substances hardly adhere and are easily removed even if they do.
· Nonflammable.
· Excellent electrical characteristics.
· There is no risk of toxic substance elution.Standard Price: MYR 460.87- Days to Ship: 26 Day(s) or more -
SANPLATEC
[Features]
· The BT tube is a PTFE-made tube with thick tube walls.
· Particularly excellent flexibility and transparency.
· Continuous use temperature is 260°C.Standard Price: MYR 919.80- Days to Ship: 37 Day(s) -
SANPLATEC
[Features]
· Excellent non-stickiness, dirt and scale do not easily adhere.
· Since the deterioration of electrical characteristics is extremely small in high temperature, high humidity and high frequency regions,
it is suitable for insulation uses.
· Excellent weather resistance.
· Maximum operating temperature is 260°C, but in the case of continuous operation, operating at 201°C or lower is recommended for safety.
· PFA tubes are transparent in comparison to PTFE tubes.Standard Price: MYR 398.83- Days to Ship: 15 Day(s) or more -
Clean Pack PFA Tube (Inch-Sized) (10 m Roll)
SANPLATEC
[Features]
· A PFA tube washed with pure water (cleanliness: class 1,000) in a clean room and doubly packed under an environment of class 100 or less.Standard Price: MYR 1,996.26- Days to Ship: 37 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Flow rate range(ml/min) |
| Size(mm) |
| Inner Diameter × Outer Diameter(mm) |
| Overall Length(m) |
| Operating Pressure(mpa) |
| Compatible Tube Outer Diameter(mm) |
| Screw Size |
| Other |
|
|
|
|
|
|
|
|
| |
| Brand | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC | SANPLATEC |
| Product Series | |||||||||
| Days to Ship | 29 Day(s) | 11 Day(s) | 15 Day(s) or more | 34 Day(s) | 20 Day(s) or more | 26 Day(s) or more | 37 Day(s) | 15 Day(s) or more | 37 Day(s) |
| Product Type | Other | Tube joint | Spiral Tube | Tube joint | Liquid feeding tube | Spiral Tube | Liquid feeding tube | Liquid feeding tube | Liquid feeding tube |
| Flow rate range(ml/min) | - | - | - | - | - | - | - | - | - |
| Size(mm) | - | - | - | - | - | - | - | - | - |
| Inner Diameter × Outer Diameter(mm) | - | 12.7×26 | - | 3×8 ～ 8×17 | - | - | - | - | - |
| Overall Length(m) | 90 ～ 120 | 49 | 0.171 ～ 0.305 | 24 ～ 50 | 10 | - | 10 | 10 | 10 |
| Operating Pressure(mpa) | - | - | - | - | - | - | - | - | - |
| Compatible Tube Outer Diameter(mm) | - | 12.7 | 9.4 ～ 64.5 | 3 ～ 8 | 3 ～ 14 | 4 ～ 10 | 3.17 ～ 12.7 | 3.17 ～ 12.7 | 3.17 ～ 19.05 |
| Screw Size | - | R 1/2 | - | - | - | - | - | - | - |
| Other | Option | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
- Dispenser
- Fluid feed pump
- Liquid feeding tube
- Spiral Tube
- Tube joint
- Tubing pump
- Handy Pump
- Other
-
Flow rate range(ml/min)
-
Size(mm)
- ø30×30×2
- Approx. 35 × 32 × 80
- ø 45×216
- ⌀47 × 254 (Trap part)
- ø 48×250
- ⌀48 × 250 (bottom size: 80 × 80) mm
- ø 50×216
- 51×101×149
- 69.2×50.0×73.5
- 70×45×48
- 78×55×52
- 80×42×86
- 82×82×128
- 88×40×15
- 97×97×171
- 100×67×140
- 115×178.5×153.5
- 118.4×118.4×191
- 129×202×192
- 129×276×192
- 129×276×195
- 135×91×146
- 201×81×92
- 241×177×204
-
Inner Diameter × Outer Diameter(mm)
- 0.025x0.794
- 0.065x0.794
- 0.1x0.794
- 0.125x0.794
- 0.13×(1/16)
- 0.13x1.588
- 0.17×(1/16)
- 0.17x1.588
- 0.175x0.794
- 0.2x0.794
- 0.25x0.794
- 0.25×(1/16)
- 0.25x1.588
- 0.46×0.92
- 0.5x0.794
- 0.5×1.0
- 0.50×(1/16)
- 0.5×1.5
- 0.5x1.588
- 0.56×1.06
- 0.68×1.18
- 0.7×1.7
- 0.75×(1/16)
- 0.75x1.588
- 0.8×1.4
- 0.8×4.1
- 0.86×1.46
- 0.9×1.7
- 0.96×1.56
- 1.00×(1/16)
- 1.0x1.588
- 1.00x1.588
- 1 x 3
- 1.0X3.0
- 1.07×1.67
- 1.19×1.79
- 1.35×1.95
- 1.5×2.5
- 1.59×3.17
- 1.6×4.9
- 2×3
- 2.0×3.0
- 2X4
- 2×4
- φ2×φ4
- 2.17×3.17
- 2.5×3.5
- 3×4
- 3.0×4.0
- 3×5
- 3×8
- 3.1×6.5
- 3.17×6.35
- 3.96×6.35
- 4×5
- 4.0×5.0
- 4X6
- 4×6
- 4.0×6.0
- φ4×φ6
- 4×10
- 4.35×6.35
- 4.8×8.1
- 4.8×9.8
- 5×6
- 5×7
- 6X8
- 6×8
- 6.0×8.0
- 6×12
- 6.35×9.52
- 6.4×9.7
- 6.4×11.4
- 7×9
- φ7×φ10
- 7.52×9.52
- 7.9×11.3
- 7.9×13
- 8×9
- 8X10
- 8×10
- 8.0×10.0
- 8×17
- 9×10
- 9×12
- 9.52×12.7
- 9.7×14.6
- 10×11
- 10X12
- 10×12
- 10.7 ×12.7
- 11×12
- 11×13
- 12×13
- 12×14
- 12.5×14
- 12.7×26
- 13×15
- 13×16
- 14×16
- 15×17
- 16×17.5
- 16×18
- 16×19
- 19×21
- 20×23
- 21.5×23.5
- 22×24
- 23×25
- 23×27
- 25×27
- 25×28
- 26×29
- 27.5×29.5
- 33×36
- 36×45
- 39×42
- 46×50
- 49×53
-
Overall Length(m)
-
Operating Pressure(mpa)
-
Compatible Tube Outer Diameter(mm)
-
Screw Size
-
Other
Narrow search by specifying Manufacturer
-
- AS ONE (254)
- SANPLATEC (9)
- HAKKOH (2)
- CHUKOH (1)
- FLONCHEMICAL (1)
- MUSASHI_ (1)
- NIREI INDUSTRY (1)
- TRUSCO NAKAYAMA (1)
CAD
-
- 2D
- 3D
Related Categories to Liquid Feeder Equipment
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy