(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SANDVIK Holding Tools for O.D. Tuning（Page3）
| Days to Ship |
|
|---|
-
Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,262.61- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4
SANDVIK
Stable clamping for both non-hole inserts and inserts with dimple holes
Standard Price: MYR 1,279.75 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,812.28 Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 2,755.45- Days to Ship: 10 Day(s) -
SANDVIK
Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP
Standard Price: MYR 2,755.45- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,067.23- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,519.01 Days to Ship: 10 Day(s) -
SANDVIK
Excellent chip control and process stability for best part quality
Accurate high-precision coolant supply controls chip control and provides stable machiningStandard Price: MYR 3,519.01- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDNNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
SANDVIK
Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite Coromant Capto Cutting Head C-DDUNR/L
Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSDNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DVVNN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,342.85- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,048.80- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,812.66- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,119.87- Days to Ship: 10 Day(s) -
Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 676.59- Days to Ship: 10 Day(s) -
SANDVIK
Outer Dia Turning, Negative[Application]
Outer Diameter
[Specification]
Applicable Tip Shape: C (80° Diamond-Shape)
Clamp Shape: Cable clamp
Selfishly: Left-hand
Applicable Tip Clearance Angle Type: Negative
Shank height(mm): 32
Shank width(mm): 32
Lead Angle(°): 15
Cutting Angle(°): 75
Clearance angle(°): 0
Function Width(mm): 27
Function Height(mm): 32
Shank width(B): 32mm
Shank height(H): 32mm
[Material]
SteelStandard Price: MYR 1,494.40 Days to Ship: 10 Day(s) -
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DCLNR/L
Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 8 Day(s) or more -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 833.98- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 714.56- Days to Ship: 10 Day(s) or more -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 719.21- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR/L
SANDVIK
Excellent cutting chip control and process stability for one of the best part quality
Standard Price: MYR 790.28- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 1,348.08- Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4 | Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4 | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP | Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L | Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80 | Outer-Diameter Turning, Shank Tool Bit For Negative Inserts, T-Max P Lever Clamp, PDJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR/L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L | |||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
| Applicable Tip Shape | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | S (Rectangular) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | D (55° Diamond-Shape) | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) |
| Applicable Chip Clearance Angle | - | - | - | - | - | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Left-hand | - | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Application | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter / End Face / Post-Grinding | Outer Diameter / Chamfer / Post-Grinding | End Face | Outer Diameter / End Face / Profiling | Outer Diameter / Post-Grinding | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / End Face | End Face | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | - | Outer Diameter / End Face / Chamfer | Outer Diameter / Chamfer / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter / Post-Grinding | End Face | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer |
| Clamp Shape | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Pin Lock | Pin Lock | Double Clamp | Double Clamp | Pin Lock | Pin Lock | Pin Lock | Pin Lock | Lever lock | - | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp |
| Shank height(mm) | 25 ～ 32 | 32 | - | - | - | 32 | - | 32 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | - | 40 ～ 50 | 20 ～ 32 | 25 ～ 40 | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 |
| Shank width(mm) | 25 ～ 32 | 25 ～ 32 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | - | 25 ～ 50 | 20 ～ 25 | 25 ～ 40 | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
-
Selfishly
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Manufacturer
-
- SANDVIK (192)
- SUMITOMO_ELEC_ (104)
- KYOCERA (90)
- NGK SPARK PLUG (26)
- ISCAR (1)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for O.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy