(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
ORIENTAL MOTOR Small AC Motors
| Days to Ship |
|
|---|
-
Induction Motor, World K2 Series
ORIENTAL MOTOR
Compliant with international safety standards, compatible with global voltages
[Features]
· Compliant with international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 317.51- Days to Ship: 1 Day(s) or more -
ORIENTAL MOTOR
- Induction Motor, K Series from ORIENTAL MOTOR.
- World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
- These models provide high cost performance with the same functions as K Series models that conform to global power supply voltages.
- The product lineup includes models with output power from 1 W to 150 W.Standard Price: MYR 291.57- Days to Ship: 9 Day(s) or more -
Speed Control Motor, World K2 Series
ORIENTAL MOTOR
- Speed Control Motor, World K2 Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, 110, VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC specifications as well as output power of 6 to 40 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature 0 to 50 °C (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 395.18- Days to Ship: 9 Day(s) -
Unit Type Speed Control Motor, US Series, Single Motor
ORIENTAL MOTOR
- Unit Type Speed Control Motor, US Series, Single Motor from ORIENTAL MOTOR.
- The US Series is a panel mounted control unit and speed control motor package.
- Wiring is performed through an easy connection method utilizing connectors.
- This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
- The instantaneous stop function is not available.Standard Price: MYR 400.24- Days to Ship: 1 Day(s) or more -
Speed Control Motor, Induction Type, K Series
ORIENTAL MOTOR
- Speed Control Motor, Induction Type, K Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 60 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature −10 to +40 °C (+14 to +104 °F) (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 379.36- Days to Ship: 27 Day(s) or more -
Parallel Shaft Gearhead for Induction Motor, World K2 Series
ORIENTAL MOTOR
- Parallel Shaft Gearheads, World K series from ORIENTAL MOTOR.
- Easy Speed Reduction and Torque Increase, Combination with a gearhead allows the motor to slow down to a required speed and generate higher torque.
- Wide Variety of Products Gearheads are available with 20 different gear ratios from 1:3 to 1:180. Using a decimal gearhead also allows for large gear ratios of 1:180 or more.
- Rated life of gear head is up to 5000 hours.Standard Price: MYR 251.89- Days to Ship: 1 Day(s) or more -
Unit-Type Speed Control Motor US Series
ORIENTAL MOTOR
- Unit-Type Speed Control Motor US Series from ORIENTAL MOTOR.
- The US Series is a panel mounted control unit and speed control motor package.
- Wiring is performed through an easy connection method utilizing connectors.
- This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
- The instantaneous stop function is not available.Standard Price: MYR 431.48- Days to Ship: 9 Day(s) or more -
Gearhead Single Unit for Combination
ORIENTAL MOTOR
- Gearhead Single Unit for Combination from ORIENTAL MOTOR.
- Wide Variety of Products Gearheads are available with 11 different gear ratios from 1:10 to 1:1200.
- Gear head type can be selected in to 3 types, Parallel Shafts, Orthogonal Axes (Hollow Shaft), Orthogonal Axes (Solid Shaft).
- The rotation direction can be selected both Reverse direction to the motor or Same direction as the motor.
- Mounting flange size can be selected 60 mm to 110 mm.Standard Price: MYR 555.04- Days to Ship: 11 Day(s) or more -
Parallel Shaft GN-K Gearhead for World K2 Series
ORIENTAL MOTOR
Gearhead that converts rotation speed and torque to the required values
[Features]
· Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
· Abundant product lineup of parallel shaft gearheads available.Standard Price: MYR 380.83- Days to Ship: 9 Day(s) -
Torque Motor K Series/World K Series, Individual Motor
ORIENTAL MOTOR
Optimal for applications that require torque adjustments, such as winding, presser applications, etc.
[Features]
· Torque motor that conforms to international safety standards (excluding 40W).
· Motor rotation speed and torque can be adjusted by installing an external voltage adjuster.
· Torque motor unit TM series that combines with a power controller that is capable of easily adjusting torque is also availableStandard Price: MYR 431.46- Days to Ship: 9 Day(s) or more -
Induction Motor, World K Series (RoHS Non-Compliant)
ORIENTAL MOTOR
Induction motor with thermal protector for signals 25 W, 40 W, 60 W, 90 W Lead wire type, type with terminal box.
[Features]
・ Built-in thermal protector for signals
・ Global voltage compatible
・ CE markingStandard Price: MYR 554.38- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 902.91- Days to Ship: 18 Day(s) or more -
Motor for AC Speed Control Unit
ORIENTAL MOTOR
- Motor for AC Speed Control Unit from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.Standard Price: MYR 520.16- Days to Ship: 12 Day(s) or more -
ORIENTAL MOTOR
Compared with other AC small standard motors, the C and B motor can start and stop more quickly, and has excellent responsiveness. Appropriate for one-direction applications that continuously and frequently start and stop.
[Features]
· High-accuracy, high-response clutch and brake enable high-frequency starts and stops.
· No-contact control of the clutch and brake operation is possible if a C and B controller (sold separately) is used.
· Compact design for easy handling.
· Drive parts can be clustered neatly together without taking up space.
· The C and B motor GC dedicated gearhead and the GCH gearhead emphasize impact resistance, have been made stronger, have been specialized, and boast improved reliability (the GN gearhead and other gearheads cannot be mounted).
· For induction motors, lead wire type, type with small terminal box, and speed control type are available.
· Also, an abundant array of power supply specifications are available: single-phase 100V and 200V, and three-phase 200VStandard Price: MYR 2,118.64- Days to Ship: 17 Day(s) -
Unit-Type Speed Control Motor US Series of Overheat Protection Type
ORIENTAL MOTOR
Unit product consisting of board surface mounting type control unit and speed control motor. Single-touch connection just by connecting a connector. Optimal for applications where simple speed control is desired. (No instant stop function.)
Standard Price: MYR 818.54- Days to Ship: 9 Day(s) or more -
Induction Motor, BH Series, Single-Unit Motor
ORIENTAL MOTOR
- Induction Motor, BH Series, Single-Unit Motor from ORIENTAL MOTOR.
- Induction motors are optimal for uni-directional and continuous operation, such as a conveyor system.
- Induction motors can be operated easily from an AC power supply.
- These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 inch).
- With each combination type, the motor and gearhead come pre-assembled for easy installation into your equipment.Standard Price: MYR 838.20- Days to Ship: 17 Day(s) or more -
Speed Control Motor, Reversible Type, K Series
ORIENTAL MOTOR
- Speed Control Motor, Reversible Type, K Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 40 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature −10 to +50 °C (+14 to +122 °F) (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 397.71 Days to Ship: 9 Day(s) or more -
Orthogonal Shaft Solid and Hollow Gearheads for Small AC Motors
ORIENTAL MOTOR
- Right-Angle Gearheads for Small AC Motors from ORIENTAL MOTOR.
- Right-angle gearheads are flange-mounted gearheads that use worm gears and special helical gears.
- Ideal for Space Saving, the motor is perpendicular to the load shaft, enabling space saving.
- With hollow shaft gearheads, the parts cost and labor will decrease since no connecting parts are needed.
- A wide variety of gear ratios (20 types, from 3 to 180) are available. The optimal gear ratio can be selected in the same manner as with parallel shaft gearheads.Standard Price: MYR 468.78- Days to Ship: 17 Day(s) -
Parallel Shaft GN-S Gearhead for Compact AC Motors
ORIENTAL MOTOR
[Features]
· Gearhead that converts motor rotation speed or torque to required rotation speed or torque.
· Abundant product lineup of parallel shaft gearheads available.Standard Price: MYR 326.20- Days to Ship: 5 Day(s) or more -
Parallel Shaft GU-K Gearhead for Compact AC Motors (Flange Mounted Type)
ORIENTAL MOTOR
Gearhead that converts number of rotations or torque to the required values
[Features]
· Type with mounting flange attached to gearhead.
· Can be incorporated into equipment after first fixing the motor and gearheadStandard Price: MYR 554.43- Days to Ship: 5 Day(s) or more -
Parallel Shaft GU-KB Gearhead (Enclosure-Shape Type) for Compact AC Motor
ORIENTAL MOTOR
Gearhead that converts number of rotations or torque to the required values
Standard Price: MYR 554.43- Days to Ship: 5 Day(s) or more -
Speed Control MotorInduction TypeSingle Unit Motor
ORIENTAL MOTOR
- Speed Control Motor, Induction Type, Single Unit Motor, MSS series from ORIENTAL MOTOR.
- This product is a compact no-contact speed control motor, with 3W and 42 mm mounting angle.
- The shape end of shaft has 2 types available, round shaft type for MSM003-003 and Pinion shaft type for MSM003-403.
- Motor lead wire includes 5 stranded wires with 300 mm length (UL style 3266, AWG24).
- The weight of the motor is 0.35 kg.Standard Price: MYR 394.80 Days to Ship: 48 Day(s) or more -
AC Speed Control Motor, US2 Series
ORIENTAL MOTOR
[Features]
・ Highly reliable closed-loop control speed control motor unit
・ Intuitive operation just by turning the dial to set the desired value and pressing the dial
・ Built-in capacitor, simple connection
・ Equipped with digital displayStandard Price: MYR 573.13- Days to Ship: 13 Day(s) or more -
ORIENTAL MOTOR
[Features]
・ Ideal for one-way, continuous operation
・ You can drive easily
・ Excellent motor performance
・ Compatible with protection rating IP66 (Type with terminal box)
・ Equipped with a low profile terminal box (Type with terminal box)
・ Gearhead design points
・ Equipped with high-performance gearheadStandard Price: MYR 388.75- Days to Ship: 17 Day(s) or more -
ORIENTAL MOTOR
Compact and emphasizes cost-effectiveness while being high-functioning
Standard Price: MYR 446.08 Days to Ship: 5 Day(s) or more -
Speed Control Motor Unit, MSD Series
ORIENTAL MOTOR
[Features]
・ Compact non-contact speed control unit with tachometer and speed control motor unit
・ Two types of control packs are available depending on the mounting method
・ Please use the DIN rail mounting for installation in the switchboard, and the recessed mounting for mounting on the panel for external display
・ Compact and easy to operate
・ Built-in digital tachometer, accurate rotational speed settingStandard Price: MYR 1,225.87- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 505.81- Days to Ship: 17 Day(s) or more -
Geared Motor, Dust-Proof and Waterproof Type, FPW Series
ORIENTAL MOTOR
4 types of output: 25W, 40W, 60W and 90W
[Features]
· Geared motor certified by UL as conforming to IEC standard IP67.
· Appropriate for use in places where water splashed or that are washed regularly.
· Waterproof type geared motor that can be used in areas affected by moisture.
· IEC standard IP67-compliant.
· Not suitable for underwater or high water pressure environments.
· Uses special coating and updated shaft materials [stainless steel (SUS303 type)] for improved corrosion resistance.
· Designed and structured to be dust-proof and waterproof.
· UL/CSA standards certified. CE marking (low voltage directive) compliant.
· Also, Chinese compulsory product authorization system (CCC system) certifiedStandard Price: MYR 1,202.21- Days to Ship: 17 Day(s) -
Single Unit Reversible Motor, World K2 Series
ORIENTAL MOTOR
Individual motor product from the world K series usable in Japan and throughout the world.
[Features]
· Conforms to international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 340.94- Days to Ship: 9 Day(s) or more -
Parallel Shaft GE-S Gearhead for Induction Motor, World K2 Series
ORIENTAL MOTOR
- Induction Motor, World K Series, Parallel Shaft GE-S Gearhead from ORIENTAL MOTOR.
- Easy speed reduction and torque increase, Combination with a gearhead allows the motor to reduce to a required speed or generate higher torque.
- The GE-S gearhead achieves a long-rated life of 10000 hours, twice the level of conventional gearhead, by adopting a large, specially designed bearing and reinforced gears.
- The GE-S gearhead comes with a tapped hole at the tip of the shaft.Standard Price: MYR 554.43- Days to Ship: 5 Day(s) or more -
Speed Control Motor, SS21 Type / SS31 Type
ORIENTAL MOTOR
[Features]
"SS21 type"
Combined with a 6 W to 40 W speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.
"SS31 type"
Combined with a 60 W high output speed control motor, speed control, instant stop, slow start / slow down (-SSSD type) are possible.Standard Price: MYR 604.94- Days to Ship: 28 Day(s) or more -
Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies
ORIENTAL MOTOR
Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation. Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
Standard Price: MYR 347.59- Days to Ship: 9 Day(s) or more -
Extra Low Speed Synchronous Motor, SMK Series
ORIENTAL MOTOR
Continuous rated synchronization motor capable of instant forward/reverse operation
[Features]
· Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
· Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
· Rotates precisely in sync with power supply frequency.
· Rotation speed does not change even if load fluctuates.
· Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
· Capable of continuous rated drive in both forward and reverse operation.
· Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
· Optimal for transport conveyors that start and stop repeatedly, etc.
· Rotates at a fixed speed even in lowering state.
· Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
·
· Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
· A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.Standard Price: MYR 365.15- Days to Ship: 9 Day(s) or more -
OL Type with LH Linear Head Reversible Motor
ORIENTAL MOTOR
LH linear head with reversible motor of the OL type.
Standard Price: MYR 1,478.43- Days to Ship: 44 Day(s) or more -
ORIENTAL MOTOR
- LH Linear Head from ORIENTAL MOTOR.
- The LH Series of linear heads with a rack-and-pinion mechanism are coupled with standard AC compact motors. They easily produce linear motion such as pressing and reversing.
- A wide variety of linear heads are available, depending on basic speed, length of rack, maximum transportable mass, direction of rack movement in respect to the mounting face etc.
- Basic speed is based on synchronous speed (1800 r/min at 60Hz). The actual speed varies with the load or power supply frequency.Standard Price: MYR 996.86- Days to Ship: 17 Day(s) or more -
Increased Safety Explosion Proof Type Motor, K Series
ORIENTAL MOTOR
Motor with improved insulation performance and other safety factors against danger, damage, etc. caused by increased ambient temperature so that it can be used in hazardous places with a risk of generation of explosive gas, flammable gas, etc. Has completely closed structure, which makes it impossible for the insulated charging component to come into contact with exterior and also prevents dust and the like from entering.
Standard Price: MYR 1,237.69- Days to Ship: 27 Day(s) -
Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type)
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.
· Combination type products that are delivered with the motor and gearhead already assembled are available.
· Mounting to equipment can also be performed easily.
· Combination type products are delivered with the motor and gearhead already assembled.
· Mounting work to equipment is reduced.
· Motor and gearhead can be ordered separately when changing motor/gearhead combinations or when a gearhead is needed for protection.Standard Price: MYR 1,645.69- Days to Ship: 17 Day(s) or more -
High Power Induction Motor BH Series 200 W
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.Standard Price: MYR 1,931.01- Days to Ship: 17 Day(s) or more -
ORIENTAL MOTOR
[Features]
· Smallest size in its class but achieves 200W output.
· Orthogonal shaft gearhead uses hypoid gears.
· Lineup of hollow shafts and solid shafts is available to achieve space-saving.
· Gearhead shaft has tapped hole machining that is convenient for connection to loads.Standard Price: MYR 3,258.65- Days to Ship: 17 Day(s) -
Single-Unit Motor with Electromagnetic Brake, World K2 Series
ORIENTAL MOTOR
Compatible with global voltages
[Features]
· Compliant with international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 724.15- Days to Ship: 9 Day(s) or more -
Reaction Synchronous Motor K Series
ORIENTAL MOTOR
A reaction synchronous motor is a motor that rotates at a rotation speed that is synchronized with the power supply frequency. Single-direction continuous operation, and is appropriate for when a fixed rotation speed is desired even if the load fluctuates.
Standard Price: MYR 359.30- Days to Ship: 27 Day(s) or more -
Induction motor world K series IP65 terminal box
ORIENTAL MOTOR
Motor with terminal that corresponds to protection grade IP65. Equipped with metal terminal box.
[Features]
· IP65 specification suitable for use in factory environments. Uses parts with excellent environment resistance that meet the demands of factory environments.
Dust-proof and dust-proof performance that corresponds to protection grade IP65, sturdy metal terminal box, etc.
· "Combination type," delivered with motor and gearhead assembled: Combination type products are delivered with the motor and gearhead already assembled. Can reduce installation man-hours, and eliminates concerns about damaging the motor shaft during assembly.
· Structure with user-friendly motor terminal box: The terminal box positioned in the back part of the motor not only boasts high environment resistance but also has a user-friendly structure.
Reasons for user-friendliness
(1) Wiring is connected with round crimp terminals.·
(2) The direction of the cable pull-out opening can be changed by the method used to assemble the motor and gearhead.
(3) Conduit pipe, etc. can be connected after removing the cable gland.
(4) Compatible with AWG14 (2 mm2) cable. Cable size can be changed to suit the motor output.Standard Price: MYR 850.59- Days to Ship: 44 Day(s) or more -
Parallel Shaft GCH Gearhead for C and B Motors
ORIENTAL MOTOR
- Parallel Shaft GCH Gearhead for C and B Motors from ORIENTAL MOTOR.
- Suitable for High-frequency Operation, the combination of a constantly rotating induction motor and a clutch and brake unit enables high frequency starting and stopping.
- Compact and Easy to Handle, the compact design simplifies handling and enables the drive unit of the machine to be mounted into a small area.
- GCH type gearhead is specifically designed for C•B motors and boasts excellent impact resistance, greater strength, and high reliability.
- GCH is designed for use with GCH-type pinion shaft motor.Standard Price: MYR 554.43- Days to Ship: 17 Day(s) -
Standard Price: MYR 365.46- Days to Ship: 12 Day(s) or more -
Combined Use Parallel Shaft Gear Head Single Unit KII Series GV Type
ORIENTAL MOTOR
- Gear Head Single Unit KII Series GV Type from ORIENTAL MOTOR.
- Wide Variety of Products Gearheads are available with 21 different gear ratios from 1:5 to 1:360.
- The lineup includes GV series, GVH series and GVR series.
- The following items are included in each product. (Gearhead, Mounting Screws, Parallel Key, Operating Manual)
- Applicable for 4 motor sizes, size 2 (flange 60 mm), size 3 (flange 70 mm), size 4 (flange 80 mm), and 5 (flange 90 mm).Standard Price: MYR 313.08- Days to Ship: 35 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Motor Type |
| Square Flange Dim. A(mm) |
| Rated Output(W) |
| Power Supply |
| Reduction Ratio |
| Gear Head Type |
| Electromagnetic Brakes, Clutches |
| Environment |
| Voltage(V) |
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR |
| Product Series | Parallel Shaft Gearhead for Induction Motor, World K2 Series | Unit-Type Speed Control Motor US Series of Overheat Protection Type | Orthogonal Shaft Solid and Hollow Gearheads for Small AC Motors | Parallel Shaft GU-K Gearhead for Compact AC Motors (Flange Mounted Type) | Parallel Shaft GU-KB Gearhead (Enclosure-Shape Type) for Compact AC Motor | Speed Control Motor – Motor Only for Unit, Induction Type, MSM Series | Parallel Shaft GE-S Gearhead for Induction Motor, World K2 Series | Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies | Induction Motor, BH Series, Parallel Shaft Gearhead (Combination Type) | Single-Unit Motor with Electromagnetic Brake, World K2 Series | Combined Use Parallel Shaft Gear Head Single Unit KII Series GV Type | ||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 1 Day(s) or more | 27 Day(s) or more | 1 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 17 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 17 Day(s) | 9 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more | 17 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 48 Day(s) or more | 13 Day(s) or more | 17 Day(s) or more | 5 Day(s) or more | 17 Day(s) or more | 17 Day(s) or more | 17 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 28 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 44 Day(s) or more | 17 Day(s) or more | 27 Day(s) | 17 Day(s) or more | 17 Day(s) or more | 17 Day(s) | 9 Day(s) or more | 27 Day(s) or more | 44 Day(s) or more | 17 Day(s) | 12 Day(s) or more | 35 Day(s) or more |
| Type | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Gear Head Only | Others / Set | Others | Gear Head Only | Motor Only | Motor Only | Motor Only | Motor Only / Set | Motor Only | Set | Motor Only | Motor Only | Gear Head Only | Gear Head Only | Gear Head Only | Gear Head Only | Motor Only | Controller Only | Motors / Motor Only | Controller Only | Others / Set | Motor Only | Set | Motor Only | Gear Head Only | Others | Motor Only | Motor Only / Set | Set | Gear Head Only | Motor Only | Set | Set | Set | Motor Only | Motor Only | Set | Gear Head Only | Gear Head Only | Gear Head Only |
| Motor Type | Induction | Induction | Induction ～ Reversible | Speed Control | Speed Control | - | Induction | - | - | Torque | Induction | Induction | Speed Control | Induction | Speed Control | Induction | Speed Control | - | - | - | - | Speed Control | Speed Control | Induction | - | Induction | Speed Control | Induction | Reversible | - | - | Extra Low Speed Synchronous | Extra Low Speed Synchronous | Reversible | - | Induction | Induction | Induction | Induction | Induction ～ Reversible | Reaction Synchronous | Induction | - | - | - |
| Square Flange Dim. A(mm) | 42 ～ 90 | 42 ～ 90 | 60 ～ 90 | 60 ～ 90 | 60 ～ 90 | 42 ～ 90 | 60 ～ 90 | - | 90 | 60 ～ 90 | 80 ～ 90 | 90 | 60 ～ 90 | 90 | 60 ～ 90 | 104 | 60 | 80 ～ 90 | 60 ～ 90 | 90 | 90 | 42 | - | 60 ～ 90 | - | 60 ～ 90 | 60 ～ 90 | 83 ～ 106.5 | 42 ～ 90 | 90 | - | 42 | 42 ～ 90 | 42 | 60 ～ 90 | 80 ～ 90 | 104 | 104 | 104 | 60 ～ 90 | 60 ～ 90 | 60 | 90 | 60 ～ 90 | 80 ～ 90 |
| Rated Output(W) | 1 ～ 150 | 1 ～ 90 | 6 ～ 40 | 6 ～ 90 | 6 ～ 60 | - | 6 ～ 90 | - | - | 3 ～ 20 | 25 ～ 90 | 60 ～ 90 | 6 ～ 90 | 40 ～ 90 | 6 ～ 90 | 200 | 6 | - | - | - | - | 3 | 6 ～ 90 | 6 ～ 90 | - | 6 ～ 90 | 6 ～ 90 | 25 ～ 90 | 1 ～ 90 | - | - | - | - | 1 | 6 ～ 90 | 25 ～ 40 | 200 | 200 | 200 | 6 ～ 90 | 3 ～ 25 | 6 | - | - | - |
| Power Supply | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | Single-Phase | Single-Phase | - | Single-Phase | - | - | Single-Phase | 3-Phase ～ Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | - | - | - | - | Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | - | Single-Phase | Single-Phase | Single-Phase | Single-Phase | - | 3-Phase | 3-Phase ～ Single-Phase | 3-Phase ～ Single-Phase | 3-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | - | - | - |
| Reduction Ratio | - | - | - | - | - | 3 ～ 180 | - | 5 ～ 1200 | 3 ～ 90 | - | - | - | 2 ～ 360 | - | - | - | - | 3 ～ 180 | 3 ～ 180 | 3 ～ 180 | 3 ～ 180 | - | - | - | - | 3～180 | - | 3 ～ 180 | - | 3 ～ 180 | - | - | 3 ～ 120 | - | - | - | 3 ～ 180 | 5 ～ 180 | 5 ～ 180 | - | - | 2 ～ 180 | 3 ～ 180 | 5 ～ 360 | 5 ～ 360 |
| Gear Head Type | - | - | - | - | - | Parallel Shaft | Not Provided / Parallel Shaft | Parallel Shaft / Perpendicular Shaft | Parallel Shaft | - | Parallel Shaft | - | Not Provided / Parallel Shaft / Perpendicular Shaft | - | - | - | - | Perpendicular Shaft | Parallel Shaft | Parallel Shaft | Parallel Shaft | - | Not Provided | Not Provided / Parallel Shaft | - | Not Provided / Parallel Shaft | - | Parallel Shaft | - | Parallel Shaft | Not Provided | - | - | Linear | Linear | - | Parallel Shaft | Perpendicular Shaft | Perpendicular Shaft | - | - | Parallel Shaft | Parallel Shaft | Parallel Shaft | Parallel Shaft |
| Electromagnetic Brakes, Clutches | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Electromagnetic Brakes | Not Provided / Electromagnetic Brakes | Electromagnetic Brakes / Clutch | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Electromagnetic Brakes | Not Provided / Electromagnetic Brakes | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Environment | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Waterproof / Dust Resistant | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Explosion Proof | Standard | Standard | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard |
| Voltage(V) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Voltage | 100 ～ 415 | 100 ～ 200 | 100 ～ 230 | 100 ～ 200 | 100 ～ 200 | - | 100 ～ 200 | - | - | 100 ～ 230 | 100 ～ 230 | 100 ～ 200 | 100 ～ 230 | 100 ～ 220 | 110 ～ 230 | 100 ～ 415 | 100 | - | - | - | - | 100 | 100 ～ 230 | 100 ～ 230 | 100 ～ 230 | 100 ～ 200 | 100 ～ 200 | 100 ～ 230 | 100 ～ 230 | - | 100 ～ 200 | 24 | 100 ～ 230 | 100 ～ 200 | - | 200 | 100 ～ 415 | 100 ～ 415 | 200 ～ 230 | 100 ～ 230 | 100 ～ 115 | 100 ～ 230 | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- Motors
- Gear Head Only
- Motor Only
- Others
- Set
- Controller Only
- Motor group
-
Motor Type
-
Square Flange Dim. A(mm)
-
Rated Output(W)
-
Power Supply
-
Reduction Ratio
- 2
- 3
- 3～180
- 3.6
- 5
- 6
- 7.5
- 9
- 10
- 10 (Middle gearhead)
- 12.5
- 15
- 18
- 20
- 25
- 30
- 36
- 40
- 50
- 60
- 75
- 80
- 90
- 100
- 120
- 150
- 160
- 180
- 200
- 240
- 250
- 300
- 360
- 450
- 600
- 1200
-
Gear Head Type
- Not Provided
- Parallel Shaft
- Perpendicular Shaft
- Linear
-
Electromagnetic Brakes, Clutches
- Not Provided
- Electromagnetic Brakes
- Clutch
-
Environment
-
Voltage(V)
-
Voltage
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Small AC Motors
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy