(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
NABEYA Vises
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Loctite CV Precision Machine Vise Step Jaws
NABEYA
Fitting for precision machine vise that prevents workpieces from floating with floating prevention mechanism, and has winder type cutting chip cover that prevents cutting chips from entering main body.
Standard Price: MYR 1,495.38- Days to Ship: 7 Day(s) or more -
Precision Compact Drill Press Vise (Yankee Vise)
NABEYA
All surfaces, with the exception of the end face on the handle side, have been finished. (P150, P250, P350, P400) Bases are attached to both the body and movable part. (Excluding P770) Acme screw is used for the feed screw of P350, P400, P300 and P770, enabling powerful tightening. Cold heading is used for the stopper balls on both ends of the handle to prevent them from falling out under any circumstances.
Standard Price: MYR 585.27- Days to Ship: 4 Day(s) or more -
NABEYA
Machine vise handle.
[Features]
· Machine vise replacement part.
· Optional part for the machine vise series.
[Application]
· Replacement handle for the machine vise.Standard Price: MYR 256.60- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 1,040.03 Days to Ship: 7 Day(s) or more -
Loctite MC Precision Machine Vise
NABEYA
When using in parallel, multiple units can be installed as it has no flange. The parallel accuracy of the parallel specification is within 0.01. Can also be used while turned sideways.
Standard Price: MYR 9,234.86- Days to Ship: 13 Day(s) or more -
NABEYA
[Features]
· Made of fully quenched materials, this is a precision tool that is finished by polishing.
· The accuracy is within 5 microns in both squareness and parallelism.
· Each machine comes with a beautiful wooden box case.Standard Price: MYR 7,849.37- Days to Ship: 7 Day(s) or more -
Maker's Vise Wedge locking tool
NABEYA
[Features]
· The accuracy is higher than the former JIS 0 class.
· Tightening from the front is possible when mounted on a 1, 2 or 4-sided angle plate.
· Uses SCM440 material that is hardened to HRC50 or higher to retain precision for longer.
· Back surface has a guide block so precision can be easily improvedStandard Price: MYR 7,402.29- Days to Ship: 13 Day(s) or more -
Loctite CV Precision Machine Vise
NABEYA
The opening is nearly doubled compared with vises of the same class. Equipped with a pressure replenishment mechanism which does not disturb the operation when the pressure drops, enabling cutting fluid or fine chips in the body to be ejected from the blow hole using the chip blow mechanism. For the mechanical type, the handle can be operated even on the fixed clamp side. The LTCV-TH is a hydraulic internal type with a specification in which the handle is operated from the fixed clamp side.
Standard Price: MYR 8,981.87- Days to Ship: 12 Day(s) or more -
lead type vise (Strong Square Vise)
NABEYA
[Features]
· Powerful angle vise.
· High fastening force: internal processing of the main body is done by broaching so the load loss is low and high fastening force is achieved.
· Highly durable: Tough cast iron and ductile parts are heavy duty, damage-resistant, and durable.
· Easy lubrication and smooth operation.
· Jaw portions are subjected to charcoal heat treatment with good durability; replacement is possible, allowing long vise service life.
· Stopper balls have heading so they will not come off.
· A turntable can be installed.Standard Price: MYR 1,588.65- Days to Ship: 4 Day(s) or more -
NABEYA
For cast parts, the tough cast iron body, the movable body, and the female thread are designed to maintain sufficient strength with a hard material cast under the quality control of a JIS factory. Heading is used for the stopper balls on both ends of the handle to prevent them from falling out. Features rubber rings attached on both ends of the handle on the inside to prevent hands and fingers from getting caught.
Standard Price: MYR 2,297.93- Days to Ship: 4 Day(s) or more -
NABEYA
Double clamp type when shipped. Two workpieces can be quickly clamped at the same time even when they have different sizes. When tightened, the Loctite lift prevention mechanism restrains the workpiece from rising up. Can be made into a single clamp type as the standard accessories are reassembled, and the body is made of ductile cast iron that has been quenched on the sliding surface.
Standard Price: MYR 15,675.82- Days to Ship: 13 Day(s) or more -
NABEYA
[Features]
· Capable of easily clasping long objects that cannot be tightened with machine vises.
· Can clamp any work whatever the table (milling machine, sabre, boring machine, etc.) is.
· Convenient for processing of mass produced products.
· Large opening depth.Standard Price: MYR 4,743.56- Days to Ship: 12 Day(s) or more -
Vise Mounting Bolt Set【3 Pieces Per Package】
NABEYA
Provided as a set for vise mounting. A set that includes 3 bolts, 3 flat washers, and 3 spring washers.
Standard Price: MYR 87.53 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 184.03 Days to Ship: 6 Day(s) or more -
Standard Price: MYR 233.63 Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· It is for light work in steel-plate pressing.
· Lower price with mass production.
· The handle is unichrome plated.Standard Price: MYR 24.54- Days to Ship: 4 Day(s) or more -
NABEYA
Made of ductile FCD600, even stronger than cast steel, and has a 35% larger mouth opening. The movable part and main unit are ductile FCD600 which will not be damaged. The high-strength socket S15CK has undergone carburizing and has been machined into a U-shape with 3 set screws to prevent excessive loosening due to impacts from above.
Standard Price: MYR 14,004.90 Days to Ship: 13 Day(s) or more -
Engineer's Vise Jaws (2 Pieces 1 Set)
NABEYA
[Features]
A lead type vise · A sturdy heavy-duty lead type vise.
A jaw plate (2 pcs./set) part.
·Compatible vise: 75/100/125/150/200/250Standard Price: MYR 194.82- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· The 4 sides excluding the end faces have undergone finishing grinding and are machined in pairs.
· S50C type hardened to HRC46-53 with improved wear resistance.
· Comes inside a strong wooden storage case.
· Also sold separately.
· By using a high-precision parallel block to find the parallelism, precision machining can be performed while preventing the workpiece from floatingStandard Price: MYR 2,910.66- Days to Ship: 4 Day(s) or more -
Loctite Precision Machine Vise
NABEYA
The lifting prevention mechanism suppresses the lifting of movable parts or workpieces. Made of ductile cast iron to prevent bending and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched (HRC45). The accuracy is higher than the former JIS 0 class. Even if it wears off, it can be easily disassembled to correct accuracy. The parallel accuracy of the parallel specification is within 0.01.
Standard Price: MYR 5,248.38- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,166.22 Days to Ship: 7 Day(s) or more -
NABEYA
[Features]
· Can also be used for metal press clamps and the metal working clamps of injection molding machines.
· It has a structure that prevents the saddle and thrust receiver from falling off the main body.
· Can also be used flipped upside-down.
· The height of the workpiece can be adjusted steplessly.Standard Price: MYR 653.57- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 1,424.06 Days to Ship: 7 Day(s) or more -
Handle Joint for Loctite CV Precision Machine Vise
NABEYA
[Features]
A component for Lock-Tight CV Precision Machine Vises.
A handle joint.
· RoHS compliant
·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
·Compatible models: Common to all CV modelsStandard Price: MYR 229.17- Days to Ship: 7 Day(s) or more -
NABEYA
The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.
Standard Price: MYR 217.35 Days to Ship: 6 Day(s) or more -
NABEYA
Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.
Standard Price: MYR 14,357.51- Days to Ship: 13 Day(s) or more -
Loctite Precision Machine Vise L Type
NABEYA
The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.
Standard Price: MYR 5,982.09- Days to Ship: 12 Day(s) or more -
FA Mouthpiece for Machine Vise
NABEYA
[Features]
A standard fitting for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QStandard Price: MYR 661.48- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 224.28- Days to Ship: 4 Day(s) or more -
NABEYA
Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.
Standard Price: MYR 2,024.43- Days to Ship: 7 Day(s) or more -
Pull Down Vise【2 Pieces Per Package】
NABEYA
Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.
Standard Price: MYR 2,392.30- Days to Ship: 4 Day(s) or more -
Flat Jaw Plates for 5-Axis Machine Vise
NABEYA
[Features]
A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)Standard Price: MYR 404.53- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 215.50 Days to Ship: 7 Day(s) or more -
NABEYA
The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.
Standard Price: MYR 586.63- Days to Ship: 4 Day(s) or more -
NABEYA
A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.
Standard Price: MYR 39,051.26 Days to Ship: 13 Day(s) or more -
Standard Price: MYR 782.17- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 315.85- Days to Ship: 6 Day(s) or more -
Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】
NABEYA
Standard clamp (coarse) for pull-down vise (free jaw vise).
Standard Price: MYR 283.42- Days to Ship: 9 Day(s) or more -
NABEYA
Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.
Standard Price: MYR 12,341.66- Days to Ship: 13 Day(s) or more -
Standard Price: MYR 661.48- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
A component of Machine Vise Series · A mounting bolt.
·Compatible vise: LT200M,LT250M,LT-HPD80E
·Compatible slot width: 22 mm
·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)Standard Price: MYR 263.98 Days to Ship: 7 Day(s) or more -
NABEYA
[Features]
· The height is designed with the jaw depth of the vise in mind.
· A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
· A 2-piece set.Standard Price: MYR 786.19- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 223.19 Days to Ship: 4 Day(s) or more -
FA Step Mouthpiece for Machine Vise
NABEYA
[Features]
A step jaw plate for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QStandard Price: MYR 782.17- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
A JIS vise collar for horizontal vise parts.
·Compatible vise: A75/A100/A125/A150Standard Price: MYR 70.41- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
-
- MISUMI (6)
- TRUSCO NAKAYAMA (159)
- NABEYA (109)
- ESCO (55)
- SUPER TOOL (26)
- BESSEY (22)
- GRIPONTOOLS (22)
- TAKAGI (14)
- MITSUTOMO (13)
- NIHONAUTOMATIC (11)
- ARC GREATTOOL (10)
- MURATEC_KDS (9)
- KTC(KYOTO TOOL) (9)
- SMATO (9)
- SIGNET (8)
- SK 11 (8)
- E VALUE (6)
- KOPAL (6)
- LOBTEX (6)
- SAKAESEIKI (6)
- TRAD (6)
- GISUKE (5)
- KOBAYASHITEKKO (5)
- GREENCROSS (4)
- HARP (4)
- MCC CORPORATION (4)
- AS ONE (3)
- GIGA SELECTION (3)
- HOZAN (3)
- NEW STRONG (3)
- ARC (2)
- BAKUMA (2)
- KITAGAWATEKKO (2)
- MINITOR (2)
- TOP (2)
- WAKAJISHI (1)
- BESTTOOL (1)
- ENGINEER (1)
- GERARDI (1)
- H & H (1)
- KONDOTEC (1)
- RIKEN KEISOKUKI (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy