MISUMI Hose, Tube

• 

  Rubber Hose for Hot Water -Heat Resistant of 100°C

  MISUMI

  【Features】
  ・You can choose from two colors of red and blue according to the application. It is useful for identifying the in and out sides.
  ・耐Excellent abrasion resistance, oil resistance and weather resistance.
  【Use】
  We can use as cooling, temperature control and general purpose hose.
  【Available】
  ・Pressure return lines for fuel, lubricating oil, air, water and low hydraulic systems.
  【Unusable】
  ・Hydraulic impulse applications and air brake applications are not recommended.
  【Maximum working pressure】
  ・2.068MPa（300PSI）
  【Operating temperature range】
  ・－40～100℃
  【Materials】
  ・NBR (inner / outer) fiber reinforced 3-layer structure

  Standard Price:	MYR 309.84-
  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Hot-Water Tubes

  MISUMI

  [M-NB]
  [materials] PA12
  [specification temperature range] -15 to 90 ° C
  [color] blue, milky white
  
  [M-WE]
  [materials] polyolefin system
  [specification temperature range] 0 to 99 ° C (water) -30 to 30 99 ° C (air)
  [color] milky white
  
  [M-SET]
  [materials] fluorocarbon resin
  [specification temperature range]-65 to 200 ° C
  [color] black , transparent
  
  [M-SFT]
  [materials] fluorocarbon resin
  [specification temperature range]-65 to 260 ° C
  [color] transparent
  
  ● Before use,
  select one tube according to the temperature of cooling water Please give me.
  2 Tubes can be used with both cooling water and oil. (※ M-WE is only water)
  3 When inserting a tube into a mold cooling one-touch joint or tightening joint, cut both ends of the tube at a right angle before use.
  Be careful when the end face of the tube is cut diagonally, as it may cause dropout of the tube or water leakage trouble.
  4 Attach the hot water tube to the one-touch fitting in combination with the dedicated insert sleeve .
  Please note that using a hot water tube without an insert sleeve may cause the tube to come off or leak problems.
  (5) The breaking pressure of the hot water tube (M-SFT) decreases as the temperature rises. Therefore, when using at high temperatures, check the breaking pressure table in [Standards / Delivery tab] before using.
  6 Tightening Fittings StraightWhen reattaching the tube to the tightening joint L-shape , cut the part once attached and then attach it.
  Keep in mind that it may cause drop-off of the tube and water leakage if it is installed as it is.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Rubber Hose For High-Temperature Water

  MISUMI

  [Use temperature range]
  -30-120 degrees Celsius
  [application fluid] water

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  High-Temperature Rubber Hose -Heat-Resistant 120degree・Heat-Resistant 150degree-

  MISUMI

  [KGHA]
  [Operating temperature range] -30 to 120 ° C
  [Maximum operating pressure] 1.5MPa
  [Application fluid] Water / oil
  
  [WHSG]
  Operating temperature range] -30 to 150 ° C
  [Maximum operating pressure] 1.0MPa
  [Application fluid ] water
  
  [corresponding plug (Dimensions tab plug connection according to "caulking fitting · a shape (female)") ,
  high temperature hose dedicated plug (FSHG, FSHGR, FSHL)
  - high temperature hose dedicated plug (FSHLR, FSHLS)

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Mold-Cooling Flexible Hoses

  MISUMI

  [Features]
  · Flexible hose is more flexible than conventional metal flexible hoses.
  ・ The hose section is closely braided simultaneously with PTFE extrusion molding, so the impact pressure resistance is improved.
  
  [Heat and cold resistance]
  · It can be used continuously under the temperature condition of -54 ° C to + 200 ° C. However, only when using this product alone.
  
  [Non-absorbable]
  · Since PTFE does not absorb water, fluid does not bleed on the outside of the pipe.
  
  [Storage life]
  · PTFE has less deterioration over time like rubber hoses, and its storage life is improved.
  
  [Available fluid] water, oil

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 304.99-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Mold-Cooling Flexible Hoses (Stainless Steel)

  MISUMI

  A15A standard has been added!
  [Features]
  ・Excellent flexibility compared to metal flexible hoses.
  ・The internal hose uses fluororesin (PTFE).
  [Corrosion Resistance]
  ・This product is made of stainless steel and has excellent corrosion resistance.
  [Non-absorbent]
  ・PTFE does not absorb moisture, so fluid will not seep out to the outside of the pipe.
  [Storage Life]
  ・PTFE has less deterioration over time like rubber hoses, and has an improved storage life.
  [Usable fluid]
  ・Water, oil
  [Usable temperature range (when used alone)]
  ・-54℃ to 200℃

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

Loading...