(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
MAPAL Carbide Square End Mills
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
OptiMill® SCM410 Composite Material Router (Left Hand) Fine Cross-Nick Router for Thin Sheets
MAPAL
[Features]
· Optimal design for contour machining of composite materials such as CFRP, etc.
· End mill specification with a base blade.
· Cutting chips fall downward as it has a left-torsion specification.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 456.66- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 581.31- Days to Ship: 8 Day(s) or more -
OptiMill® SCM451 Composite Material End Mill (8 Flutes Internally Lubricated Type)
MAPAL
[Features]
· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 3,681.27- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Steel-HPC Unequal Division, Unequal Lead 3-Flute, Steel
MAPAL
[Features]
· A universal type that can be used for everything from longitudinal machining to groove machining.
· Dedicated design for steel machining.
· Variable split and unequal lead greatly reduce cutting vibration (chatter).
· Low cut-resistance design enables quiet cutting and a long operating life.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron.Standard Price: MYR 422.48- Days to Ship: 8 Day(s) or more -
MAPAL
[Features]
· Supports a wide range of materials from raw materials to hardened steel (about 50 HRC).
· An affordable, economical type.
[Applications]
· Work materials: Carbon steel, alloy steel, hardened steel (50 HRC), cast iron, stainless steel.Standard Price: MYR 93.14- Days to Ship: 8 Day(s) or more -
OptiMill® Carbide End Mill for Aluminum (2 Flutes)
MAPAL
[Features]
· It is designed exclusively for machining aluminum alloy.
· Cutting edge has a sharp corner.
· Large chip pocket and rake angle.
· Uses a sharp wave-shaped blade.
[Applications]
· Work materials: Aluminum alloy, aluminum die cast, copper alloy, brass.Standard Price: MYR 230.68- Days to Ship: 8 Day(s) or more -
OptiMill® Carbide Universal End Mill (3 Flutes)
MAPAL
[Features]
· A universal type that can be used for everything from longitudinal machining to groove machining.
· SCM160 (small diameter) is a sharp corner chamfer, and SCM170 has rigid corner chamfer specifications.
· A high rake specification with high sharpness.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron, stainless steel, light alloy.Standard Price: MYR 240.55- Days to Ship: 8 Day(s) or more -
MAPAL
[Features]
· Supports a wide range of materials from raw materials to hardened steel (about 50 HRC).
· A high rake specification with high sharpness.
· An affordable, economical type.
[Applications]
· Work materials: Carbon steel, alloy steel, hardened steel (50 HRC), cast iron, stainless steel.Standard Price: MYR 113.65- Days to Ship: 8 Day(s) or more -
OptiMill® Carbide End Mill for Stainless Steel (4 Flutes)
MAPAL
[Features]
· Ideal design for grooving of stainless steel and heat-resistant alloy.
· Cutting edge has a sharp corner.
· Multi-layer TiAlN coating with excellent welding and abrasion resistance.
[Applications]
· Work materials: Stainless steel, titanium alloy, Inconel, Hastelloy.Standard Price: MYR 304.76- Days to Ship: 8 Day(s) or more -
OptiMill® Long End Mill (Multi Fluted for Finishing)
MAPAL
[Features]
· Long blade length for finishing.
· The multi-blade design demonstrates high rigidity.
· Excellent cost performance.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron, stainless steel, light alloy.Standard Price: MYR 368.98- Days to Ship: 8 Day(s) or more -
OptiMill® Uneven Division Uneven Lead End Mill (6 Flutes, Finishing)
MAPAL
[Features]
· 6-flute specification for finishing.
· Ideal for high-speed, high-feed and high-efficiency machining.
· Variable split and unequal lead greatly reduce cutting vibration (chatter), and enable long tool life.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, heat-resistant alloy.Standard Price: MYR 445.26- Days to Ship: 8 Day(s) or more -
OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)
MAPAL
[Features]
· "Rough & Finish" design supports rough to medium finishing using a single tool.
· The cutting edge is chamfered (excluding ø6) for higher rigidity.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel.Standard Price: MYR 492.41- Days to Ship: 8 Day(s) or more -
OptiMill® SCM400 Composite Material Router (Right Hand) Coarse Cross-Nick Router for Thick Sheets
MAPAL
[Features]
· Optimal design for pocket machining of composite materials such as CFRP, etc.
· End mill specification with a base blade.
· A right-torsion specification which sends cutting chips upward.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 428.13- Days to Ship: 8 Day(s) or more -
OptiMill® SCM400 Composite Material Router (Right Hand) Fine Cross-Nick Router for Thin Sheets
MAPAL
[Features]
· Optimal design for pocket machining of composite materials such as CFRP, etc.
· End mill specification with a base blade.
· A right-torsion specification which sends cutting chips upward.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 473.71- Days to Ship: 8 Day(s) or more -
OptiMill® SCM410 Composite Material Router (Left Hand) Coarse Cross-Nick Router for Thick Sheets
MAPAL
[Features]
· Optimal design for contour machining of composite materials such as CFRP, etc.
· End mill specification with a base blade.
· Cutting chips fall downward as it has a left-torsion specification.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 621.84- Days to Ship: 8 Day(s) or more -
OptiMill® SCM450 Composite Material End Mill (8 Flutes)
MAPAL
[Features]
· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 2,433.54- Days to Ship: 8 Day(s) or more -
OptiMill® SCM460 Composite Material End Mill (8 Flutes)
MAPAL
[Features]
· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.
· A right-torsion specification which sends cutting chips upward.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 2,433.54- Days to Ship: 8 Day(s) or more -
OptiMill® SCM470 Composite Material End Mill (8 Flutes)
MAPAL
[Features]
· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.
· Cutting chips fall downward as it has a left-torsion specification.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 2,433.54- Days to Ship: 8 Day(s) or more -
OptiMill® SCM480 Composite Material End Mill (4 Flutes, Finishing)
MAPAL
[Features]
· Achieves excellent finish in machining of composite materials such as CFRP, etc.
· Low cutting resistance in the thrust direction due to a weak torsion angle, reducing burrs and delamination.
[Applications]
· Work materials: Composites such as CFRP, etc.Standard Price: MYR 2,176.23- Days to Ship: 8 Day(s) or more -
Mapal CPMill-Uni-Rough&Finish "CPM140"
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· Rough & finish designs.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, light alloy.Standard Price: MYR 787.10- Days to Ship: 8 Day(s) or more -
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· Variable split greatly reduces cutting vibration (chatter).
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, light alloy.Standard Price: MYR 695.94- Days to Ship: 8 Day(s) or more -
Mapal CPMill-Steel-HPC "CPM110"
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· Variable split greatly reduces cutting vibration (chatter).
· Dedicated for steel.
[Applications]
· Work materials: Carbon steel, alloy steel, stainless steel.Standard Price: MYR 656.02- Days to Ship: 8 Day(s) or more -
Mapal CPMill-Uni-Finish-HPC "CPM130"
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· Variable split greatly reduces cutting vibration (chatter).
· 6-flute specification ideal for finishing.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, light alloy.Standard Price: MYR 718.73- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute (SCM380J-2000Z04R-F0040HA-HP213)
MAPAL
[Features]
· Supports trochoidal milling for cutting depths up to 3 x D (universal type).
· Enables high-speed / high-feed processing 2 to 3 times that of the conventional models
· Uses a special chip breaker for optimized chip discharge.
· We recommend using with the dedicated software to maximize the full potential of this end mill.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, nonferrous metalStandard Price: MYR 2,714.51 Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Hardened, for Carbide, Multi-Flute, Medium Flute Length
MAPAL
[Features]
· Ideal for machining high-hardness materials.
· Reinforced blade tip design.
· The multi-blade design has excellent rigidity.
[Applications]
· Work materials: Tempered steel (50 - 65 HRC)Standard Price: MYR 388.29- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute (SCM380J)
MAPAL
[Features]
· Ideal for high-speed, high-feed and high-efficiency machining
· Variable split and unequal lead greatly reduce cutting vibration (chatter).
· Low cut-resistance design enables quiet cutting and a long operating life.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, heat resistant alloyStandard Price: MYR 438.08- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Uni-Long General-Purpose, 3-Flute, Long Flute Length
MAPAL
[Features]
· Universal type that can be used on any work material.
· There is an anti-vibration effect based on the odd number of blades.
· The cutting edge is corner chamfered for higher rigidity.
· A high rake specification with high sharpness.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron, stainless steel, light alloy.Standard Price: MYR 336.97- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-HPC-CR, Unequal Deviation/Unequal Lead, 4-Flute, Radius
MAPAL
[Features]
· Universal type that can be used on any work material.
· Variable split and unequal lead greatly reduce cutting vibration (chatter).
· Low cut-resistance design enables quiet cutting and a long operating life.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron, stainless steel, light alloy.Standard Price: MYR 507.90- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Alu-HPC Unequal Deviation/Unequal Lead, 3-Flute, for Aluminum
MAPAL
[Features]
· Dedicated design for nonferrous metal machining.
· Variable split and unequal lead greatly reduce cutting vibration (chatter).
· Low cut-resistance design enables quiet cutting and a long operating life.
[Applications]
· Work materials: Aluminum alloy, aluminum die cast, copper alloy, brass.Standard Price: MYR 542.07- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute
MAPAL
[Features]
· Universal type usable regardless of the type of machining, from contouring to grooving.
· Variable split and unequal lead greatly reduce cutting vibration (chatter).
· Low cut-resistance design enables quiet cutting and a long operating life.
[Applications]
· Work materials: Carbon steel, alloy steel, tempered steel, cast iron, stainless steel, light alloy.Standard Price: MYR 433.16- Days to Ship: 8 Day(s) or more -
OptiMill® End Mill Trochoidal Milling, Universal (5 Flutes)
MAPAL
[Features]
· Supports trochoidal milling for cutting depths up to 3 x D.
· Enables high-speed / high-feed processing 2 to 3 times that of the conventional models.
· Uses a special chip breaker for optimized chip discharge.
· We recommend using with the dedicated software to maximize the full potential of this end mill.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, nonferrous metal.
[Material]
· Ultrafine particle cemented carbide (Micro Grain Carbide)Standard Price: MYR 638.97- Days to Ship: 8 Day(s) or more -
Mapal OptiMill-Steel-Trochoid 5-Flute, Steel (SCM590J)
MAPAL
[Features]
· Supports trochoidal milling for cutting depths up to 3 x D (for steel).
· Enables high-speed / high-feed processing 2 to 3 times that of the conventional models
· Uses a special chip breaker for optimized chip discharge.
· We recommend using with the dedicated software to maximize the full potential of this end mill.
[Applications]
· Work materials: Carbon steel, alloy steel
[Material]
· Ultrafine particle cemented carbide (Micro Grain Carbide)Standard Price: MYR 667.41- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 5,840.46 Days to Ship: 8 Day(s) or more -
OptiMill® SCM490 Aramid Material End Mill (2 Flutes)
MAPAL
[Features]
· Enables excellent machining of aramid materials (Kevlar).
· High-performance cutting edge reduces fraying during processing.
[Applications]
· Work material: Aramid material (Kevlar).
[Material]
· Ultrafine particle cemented carbide (Micro Grain Carbide)Standard Price: MYR 1,647.33- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL | MAPAL |
| Product Series | OptiMill® SCM410 Composite Material Router (Left Hand) Fine Cross-Nick Router for Thin Sheets | OptiMill® SCM451 Composite Material End Mill (8 Flutes Internally Lubricated Type) | Mapal OptiMill-Steel-HPC Unequal Division, Unequal Lead 3-Flute, Steel | OptiMill® Uneven Division Uneven Lead End Mill (6 Flutes, Finishing) | OptiMill® SCM400 Composite Material Router (Right Hand) Coarse Cross-Nick Router for Thick Sheets | OptiMill® SCM400 Composite Material Router (Right Hand) Fine Cross-Nick Router for Thin Sheets | OptiMill® SCM410 Composite Material Router (Left Hand) Coarse Cross-Nick Router for Thick Sheets | OptiMill® SCM480 Composite Material End Mill (4 Flutes, Finishing) | Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute (SCM380J-2000Z04R-F0040HA-HP213) | Mapal OptiMill-Hardened, for Carbide, Multi-Flute, Medium Flute Length | Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute (SCM380J) | Mapal OptiMill-Uni-Long General-Purpose, 3-Flute, Long Flute Length | Mapal OptiMill-HPC-CR, Unequal Deviation/Unequal Lead, 4-Flute, Radius | Mapal OptiMill-Alu-HPC Unequal Deviation/Unequal Lead, 3-Flute, for Aluminum | Mapal OptiMill-Uni-HPC Unequal Deviation/Unequal Lead, 4-Flute | |||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Blade diameter (D)(φ) | 4 ～ 10 | 6 ～ 25 | 6 ～ 20 | 3 ～ 20 | 1.5 ～ 20 | 2 ～ 20 | 1 ～ 20 | 1.5 ～ 12 | 2 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 5 ～ 20 | 6 ～ 10 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 20 | 6 ～ 18 | 3 ～ 18 | 4 ～ 16 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 5 ～ 25 | 5 ～ 20 | 25 | 4 ～ 20 |
| Blade length (ℓ)(mm) | 16 ～ 25 | 13 ～ 45 | 28 ～ 45 | 11 ～ 38 | 3 ～ 45 | 6 ～ 38 | 2 ～ 38 | 3 ～ 32 | 8 ～ 32 | 16 ～ 95 | 15 ～ 41 | 13 ～ 38 | 16 ～ 45 | 16 ～ 45 | 19 ～ 25 | 16 ～ 45 | 16 ～ 45 | 16 ～ 45 | 25 ～ 42 | 10 ～ 32 | 6 ～ 19 | 6 ～ 19 | 10 ～ 32 | 26 | 18 ～ 54 | 6 ～ 22 | 19 ～ 63 | 5 ～ 30 | 8 ～ 41 | 8 ～ 41 | 17 ～ 75 | 17 ～ 60 | 75 | 20 ～ 75 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 10 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 5 ～ 20 | 6 ～ 10 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 20 | 6 ～ 18 | 6 ～ 18 | 6 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 25 | 4 ～ 20 |
| Number of flutes(sheet) | - | 4 ～ 6 | 8 | 3 | - | 2 | 3 | - | 4 | 6 ～ 8 | 6 | 3 ～ 4 | - | - | - | 8 | 8 | 8 | 4 | 4 ～ 6 | 4 | 3 | 6 | 4 | 6 ～ 8 | 4 | 3 | 4 | 3 | 4 | 5 | 5 | 5 | 2 |
| Overall Length (L)(mm) | 50 ～ 72 | 57 ～ 121 | 72 ～ 104 | 57 ～ 104 | 50 ～ 100 | 57 ～ 104 | 38 ～ 104 | 50 ～ 75 | 57 ～ 104 | 62 ～ 150 | 57 ～ 104 | 57 ～ 104 | 50 ～ 104 | 50 ～ 104 | 60 ～ 72 | 60 ～ 104 | 60 ～ 104 | 60 ～ 104 | 63.5 ～ 104 | 15 ～ 45 | 11 ～ 32 | 11 ～ 32 | 15 ～ 45 | 92 | 62 ～ 114 | 50 ～ 82 | 63 ～ 123 | 50 ～ 112 | 57 ～ 104 | 57 ～ 104 | 62 ～ 150 | 62 ～ 126 | 150 | 75 ～ 150 |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torsion Angle (θ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Blade tip shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5H
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7H
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.99
- 9
- 9H
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11H
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13H
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14H
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15H
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16H
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17H
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18H
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19H
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20H
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.4
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.58
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
62
-
63
-
64
-
65
-
66
-
67
-
70～70.50
- 70
- 70.50
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
110
-
115
-
120
-
125
-
130
-
150
-
200
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
Narrow search by specifying Manufacturer
-
- MISUMI (130)
- OSG (88)
- NS TOOL (84)
- GUHRING (50)
- SANDVIK (50)
- OKAZAKI SEIKO (40)
- NACHI (35)
- MAPAL (34)
- DIJET (31)
- UNION TOOL (23)
- ASAHI TOOLS (20)
- KYOWA SEIKO (17)
- 7 LEADERS (16)
- THE_CUT (14)
- KYOCERA (13)
- SANKO MFG (13)
- EIKOSHA (8)
- SPEED TIGER (7)
- ATOM (5)
- SUMITOMO_ELEC_ (4)
- VAN_HOORN (3)
- WIDIN (3)
- TOYO DRILL (2)
- GCT (2)
- PROCHI (1)
- TAIYO-TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Carbide Square End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy