(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KNIPEX Pliers/Nippers/Pincers（Plier Type：Pliers）
| Days to Ship |
|
|---|
-
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire, hard wire, and piano wire.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 228.31- Days to Ship: 8 Day(s) or more -
KNIPEX
[Features]
· It can cut hard wires and piano wires.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Polished.
· Handle Specification: ComfortStandard Price: MYR 267.25- Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire, hard wire, and piano wire.
· Hardness of the cutter which has been carefully quenched is approximately HRC 64.
· Oil tempered and quenched high quality special tool steel is used for the material.
· Head finish: Chrome plated.
· Handle Specification: ComfortStandard Price: MYR 435.23 Days to Ship: 6 Day(s) or more -
KNIPEX
Cutting, Grasping, Bending
[Features]
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Demonstrates the full potential of the lever principle through its unique lever design, making cutting, gripping, and bending work easier.
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Hardness of the cutter which has been carefully quenched is approximately HRC 60.
· Oil tempered and quenched special tool steel is used for the material.
· Head finish: Chrome plated.
· Handle specification: Comfort.Standard Price: MYR 282.78 Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 327.82 Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· Cutting, grasping, bending.
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Demonstrates the full potential of the lever principle through its unique lever design, making cutting, gripping, and bending work easier.
· The gripping surface has a shape that supports plates and pipes, allowing it to be used in a wide range of applications.
· The side cutter can cut soft wire and hard wire.
· Cuts thick cable more efficiently with a longer side cutter.
· Head finish: Polished.
· Hardness of the cutter which has been carefully quenched is approximately HRC 60.
· Oil tempered and quenched special tool steel is used for the material.
· Handle Specification: ComfortStandard Price: MYR 236.03- Days to Ship: 8 Day(s) or more -
Powerful Pliers for Overhead Wire Construction
KNIPEX
Cutting, Grasping, Bending
[Features]
· The cutter portion has undergone a very thorough hardening process, enabling it to cut through piano wire as well.
· It can easily grasp pipe-shaped objects.
· Powerful pliers for overhead wire construction capable of also cutting ACSR (Aluminum stranded wire containing a steel core).
· This unique lever design maximizes an effect of the principle of leverage, thus it can minimize the burden of cutting.
· Head tip gripping surface has cross cut serrations.
· Grip surface of lower part of joint has a lateral cut.
· Head Finish: PolishedStandard Price: MYR 462.33- Days to Ship: 9 Day(s) -
Electrician's Pliers 1301/1302/1305
KNIPEX
Electrician's pliers that are ideal for all sort of work related to cables.
[Features]
· Pliers that are ideal for wiring work.
· Cutting medium-hardness wires.
· High-frequency quench-treated precision cutting blade and approx. 60 HRC blade hardness.
· With precision strip hole.
· Crimping of end sleeve.
· Vanadium electric steel, forged, multi-stage oil-quenched.
[Applications]
· Ideal for working involving grasping or bending wires.Standard Price: MYR 466.90 Days to Ship: 4 Day(s) or more -
KNIPEX
[Features]
· Head has a short, flat shape.
· Grip surface has linear cut for slip prevention.
· Oil tempered and quenched special tool steel is used for the material.
· Head: Polished.
· Handle: Plastic coatingStandard Price: MYR 161.61- Days to Ship: 9 Day(s) or more -
KNIPEX
[Features]
· Head has a short, flat shape.
· Grip surface has linear cut for slip prevention.
· Oil tempered and quenched special tool steel is used for the material.
· Head: Polished.
· Handle: ComfortStandard Price: MYR 224.60 Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· Ideal for molding wires in a loop.
· Head is a short conical type machined with precision.
· Smooth gripping surface.
· Oil tempered and quenched special tool steel is used for the material.
· Head: Polished.
· Handle: Plastic coatingStandard Price: MYR 172.68- Days to Ship: 8 Day(s) or more -
KNIPEX
[Features]
· Ideal for molding wires in a loop.
· Head is a short conical type machined with precision.
· Smooth gripping surface.
· Oil tempered and quenched special tool steel is used for the material.
· Head: Chrome plated.
· Handle: ComfortStandard Price: MYR 276.06- Days to Ship: 9 Day(s) -
Western Plug Crimping Pliers (6, 8-Pin) 9751-12
KNIPEX
[Features]
· Professional tool for cutting and stripping telephone ribbon cable.
· For crimping of RJ10 (width 7.65 mm) type, RJ11/12 (width 9.65 mm) type, and RJ45 (width 11.68 mm) type Western plugs with 4, 6 or 8 pins.
· As force can be applied in parallel, it can be securely crimped.
· Compatible terminal: Western plug.
· Replacement blade part number: 9759-06.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 1,410.58 Days to Ship: 9 Day(s) -
End Sleeve Crimping Pliers 9761-145
KNIPEX
End sleeve crimping pliers that crimp the sleeve and conductor wire.
[Features]
· Reliably connect the sleeve and conductor by crimping using the labeled trapezoidal die shape.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
[Applications]
· For crimping end sleeves up to 0.25–2.5 mm² that comply with DIN46228 Par. 1 and Par. 4.Standard Price: MYR 312.45- Days to Ship: 9 Day(s) -
End Sleeve Crimping Pliers 9771
KNIPEX
[Features]
· For crimping 0.25 to 16 mm2 end sleeves compliant with article 1 or article 4 of DIN46228.
· Trapezoidal crimping part crimps sleeve and conductor according to the noted size.
· Crimped part supports 8 sizes.
· Oil tempered and quenched special tool steel is used for the material.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle specification: Plastic coating.Standard Price: MYR 433.58 Days to Ship: 4 Day(s) or more -
End Sleeve Crimping Pliers 9781
KNIPEX
[Features]
· For crimping 0.5 to 6.0 mm2 end sleeves compliant with article 1 or article 4 of DIN46228.
· Ideal for crimping work in deep and narrow areas such as switch boxes.
· Oil tempered and quenched special tool steel is used for the material.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 556.52 Days to Ship: 10 Day(s) -
Crimper Pliers 9752-04/9752-05/9752-06/9752-08/9752-09/9752-10/9752-13/9752-19/9752-23
KNIPEX
Jaw replacement cannot be performed.
[Features]
· Next generation crimping pliers that adopt a design that maximizes the effect of the principle of leverage.
· For crimping work with terminals, etc., that do not require soldering.
· It can crimp with 30% less force than the conventional crimp pliers.
· Head finish: Black finish.
· Handle specification: Plastic coating.Standard Price: MYR 1,392.60- Days to Ship: 4 Day(s) or more -
Crimp Combination Pliers, 9752-50
KNIPEX
For crimping work with terminals, etc., that do not require soldering.
Standard Price: MYR 1,193.23- Days to Ship: 4 Day(s) or more -
Western Plug Crimping Pliers (6, 8-Pin) 9751-10
KNIPEX
[Features]
· Professional tool for cutting and stripping telephone ribbon cable.
· For crimping of RJ11/12 (width 9.65 mm) type and RJ45 (width 11.68 mm) type Western plugs with 6 or 8 pins.
· As force can be applied in parallel, it can be securely crimped.
· Compatible terminal: Western plug.
· Replacement blade part number: 9759-06.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 448.39 Days to Ship: 9 Day(s) -
End Sleeve Crimping Pliers 9753-04/9753-14
KNIPEX
[Features]
· For crimping end sleeves compliant with article 1 or article 4 of DIN46228.
· For crimping work with terminals, etc., that do not require soldering.
· Insert the end sleeve from the side of the tool and crimp it.
· Compatible terminal: End sleeve.
· Head finish: Polished.
· Handle specification: Comfort.
· Square crimping: 9753-04.
· Hex crimping: 9753-14.Standard Price: MYR 1,846.10 Days to Ship: 8 Day(s) -
KNIPEX
The slim head shape and pointed jaws (reliable rotation stopper) enable optimal work even in places where access is difficult.
One side of the gripping surface is convex so that the flat part can be firmly gripped.
The milled grasping part grooves enable small workpieces such as nails, pins, and bolts to be held or pulled out.
Tapered combination pliers that are highly reliable and suitable for a variety of applications (portable use).
The highly powerful joint with high leverage makes cutting easy.
Includes blade for medium-hard and hard wire.
Long-lasting durability and a stable cutting edge.
Constructed of high-quality special tool steel and subjected to multi-stage oil quenching.Standard Price: MYR 304.49 Days to Ship: 4 Day(s) or more -
End Sleeve Crimping Pliers 9762
KNIPEX
· For crimping end sleeves up to 0.25–2.5 mm2 that comply with DIN46228 Par. 1 and Par. 4.
· Crimps sleeve and conductive wire at a size in conformance with notation at the trapezoid crimp portion.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
· For end sleeve crimping.Standard Price: MYR 328.44 Days to Ship: 8 Day(s) -
End Sleeve Crimping Pliers 9772
KNIPEX
· For crimping end sleeves up to 0.25–2.5 mm2 that comply with DIN46228 Par. 1 and Par. 4.
· Crimps sleeve and conductive wire at a size in conformance with notation at the trapezoid crimp portion.
· The crimping part is compatible with nine sizes.
· Made from oil quenched and tempered special tool steel.
· For end sleeve crimping.Standard Price: MYR 495.55 Days to Ship: 9 Day(s) -
KNIPEX
· For crimping work of terminals etc. that do not need soldering
· The crimping pliers of this series are precisely set at the factory to conform with the standard.
· Exhibits high crimping capability with little force due to its design that maximizes the use of the lever principle.
· Work is made much easier with the optimal handle position, lightweight body, short-type design and ergonomic handle shape.
· All load-bearing parts are made of oil-quenched and tempered special tool steel.
· For non-insulated butt connector.Standard Price: MYR 1,270.18 Days to Ship: 8 Day(s) -
Heavy-Duty Pliers For Overhead Wire Work (With Crimping) 0911-240
KNIPEX
· Heavy-duty pliers for overhead wire work that also allows cutting of aluminum conductor steel-reinforced cables (ACSR)
· Load during cutting is relieved due to its unique lever design that exhibits the lever principle at its fullest.
· The hardness of the carefully quenched cutter part is roughly HRC 64.
· Strong pressure is applied onto the grasping surface under the joint due to the lever principle.
· Forged for increased hardness.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
· With crimping function (bare terminal/insulated bare terminal-compatible)Standard Price: MYR 547.68 Days to Ship: 5 Day(s) or more -
Heavy-Duty Pliers For Overhead Wire Work (With Crimping) 0912-240
KNIPEX
· Heavy-duty pliers for overhead wire work that also allows cutting of aluminum conductor steel-reinforced cables (ACSR)
· Load during cutting is relieved due to its unique lever design that exhibits the lever principle at its fullest.
· The hardness of the carefully quenched cutter part is roughly HRC 64.
· Strong pressure is applied onto the grasping surface under the joint due to the lever principle.
· Forged for increased hardness.
· The material is oil-quenched and tempered chromium-vanadium electric steel.
· With crimping function (bare terminal/insulated bare terminal-compatible)Standard Price: MYR 580.39 Days to Ship: 9 Day(s) -
Standard Price: MYR 389.11 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX |
| Product Series | Crimper Pliers 9752-04/9752-05/9752-06/9752-08/9752-09/9752-10/9752-13/9752-19/9752-23 | Heavy-Duty Pliers For Overhead Wire Work (With Crimping) 0911-240 | Heavy-Duty Pliers For Overhead Wire Work (With Crimping) 0912-240 | ||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 8 Day(s) | 4 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more |
| Product Category | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plier Type | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Nipper Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 180 ～ 225 | 200 ～ 225 | 225 | 160 | 250 | 180 ～ 200 | 240 | 160 | 125 ～ 140 | 160 | 125 ～ 140 | 140 ～ 160 | 200 | 145 | 180 | 180 | 250 | 220 | 190 | 180 | 145 | 145 | 180 | 220 | 240 | 240 | 145 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | - | - | Available | - | - | - | - | - | - | - |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | 11.5 ～ 14 | 13 ～ 14 | 14 | 10 | 15 | 12 ～ 13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 | - | - | - | - | - | 8 |
| Piano Wire Cutting Performance(φ/mm) | 2 ～ 2.5 | 2.2 ～ 2.5 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
- Pliers
- Pliers
- Nippers
- Parts
-
Plier Type
- Pliers
- Retaining Ring Pliers
-
Plier Type
- Pliers
- Lead Pliers
- Longnose pliers
-
Nipper Type
- Nippers
- Heat Nippers
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
-
With or without Spring
- Available
- NA
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 8.0
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
- Available
- NA
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Blade Tip
- Spring
- Snap ring plier tip claw
Narrow search by specifying Manufacturer
-
- KNIPEX (27)
- MUROMOTO TEKKO (11)
- ENGINEER (9)
- TSUNODA (8)
- FUJIYA (5)
- HOZAN (5)
- KEIBA (5)
- TOP (3)
- TRUSCO NAKAYAMA (3)
- HANAZONO TOOL (2)
- KTC(KYOTO TOOL) (2)
- Ｍ＆Ｍ (2)
- TONE (2)
- 3PEAKS (2)
- MITOLOY (1)
- SMATO (1)
- TRAD (1)
- WIHA (1)
- ANEX (0)
- H & H (0)
- ARC GREATTOOL (0)
- AS ONE (0)
- GOOT (0)
- NEPROS (0)
- ARC (0)
- E VALUE (0)
- SIGNET (0)
- LOBTEX (0)
- IGARASHIPLIERS (0)
- HAZET (0)
- GRIPONTOOLS (0)
- SUPER TOOL (0)
- ESCO (0)
- LINDSTROM (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy