(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Laboratory Jack, Load-Bearing Capacity Of 8 To 45 kg
AS ONE
Laboratory jack with stainless steel top panel.
[Features]
· Height can be adjusted by turning the side lever.
· The ratchet type comes with a ratchet wrench (accessory).
[Applications]
· Height adjustment for tools and equipment used in laboratories and research institutes.
| Standard Price: | MYR 379.28- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

AS ONE Corporation Heater Stand
AS ONE
[Features]
· The square stand can be used for fixing square items such as water baths, oil baths, or hot plates, while the round stand can be used for fixing round items such as mantle heaters.
· As instruments are placed on the stand, it can prevent overturning and can be installed anywhere while saving space.
· The position and number of posts can be selected according to applications.
· By using the included horizontal pipe with the square stand, rotation does not occur even when the clamp is fixed using a muff clamp.
| Standard Price: | MYR 58.78- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

AS ONE
Specifications: square stand (wide type)
Product detail type: square stand / wide type
Material: stainless steel (SUS304)
| Standard Price: | MYR 778.43- |
|---|---|
| Days to Ship: | 16 Day(s) or more |

Laboratory Jack With Silicone Mat
AS ONE
The top and bottom plates are covered with silicone rubber for side slipping and fall prevention of glass containers.
| Standard Price: | MYR 820.86- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

AS ONE
Because it is an assembly type, it is easy to store and move, and the length of the bar can be freely determined by connecting.
| Standard Price: | MYR 736.66 |
|---|---|
| Days to Ship: | 5 Day(s) |

AS ONE
Up to 15 shafts can be mounted to desired positions. Can be used as a simple stage or flat stand.
| Standard Price: | MYR 143.18- |
|---|---|
| Days to Ship: | 8 Day(s) |

AS ONE
The height can be easily adjusted by turning the handle (about 7 mm per rotation). Gear mechanism enables fine adjustments. ANB type head mounts can rotate 360°and can be adjusted to any desired angle.
| Standard Price: | MYR 1,170.76- |
|---|---|
| Days to Ship: | 8 Day(s) |

H Type Stand Shaft Size ø 13 × 1000 mm/φ15x1500 mm
AS ONE
It is an H-type base stand with excellent stability. Large and extra-large types come with level adjustment screws.
| Standard Price: | MYR 517.25- |
|---|---|
| Days to Ship: | 8 Day(s) |

H Type Stand Shaft Size ø 10 × 350 mm/φ10x750 mm
AS ONE
It is an H-type base stand with excellent stability.
| Standard Price: | MYR 121.28 |
|---|---|
| Days to Ship: | 11 Day(s) |

All Stainless Steel H Type Stand
AS ONE
The entire post and the base components are made of stainless steel, providing superior chemical resistance, rust resistance, and corrosion resistance.
| Standard Price: | MYR 2,616.85- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

AS ONE
Stand for large agitators and large tanks.
Strut size: ⌀16 × 900 mm
Weight: Approx. 4.2 kg
| Standard Price: | MYR 2,627.98 |
|---|---|
| Days to Ship: | 11 Day(s) |

Stand (Tripod) Steel Shaft / Stainless Steel Shaft
AS ONE
A stable tripod stand for experiments.
[Features]
· The post is a steel or stainless steel tripod stand.
· Expansion to 3 sizes, large, medium, and small.
| Standard Price: | MYR 153.88 |
|---|---|
| Days to Ship: | 11 Day(s) |

Stand (Flat Base) Steel Shaft / Stainless Steel Shaft
AS ONE
A stable flat stand for experiments.
[Features]
· The post is a steel or stainless steel flat base stand.
· Expansion to 3 sizes, large, medium, and small.
| Standard Price: | MYR 240.99 |
|---|---|
| Days to Ship: | 11 Day(s) |
| Standard Price: | MYR 786.91 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

All Stainless Steel Flat Stand
AS ONE
The post and base are entirely stainless steel, providing superior chemical resistance and corrosion resistance. Features double-fastening method to prevent the post from loosening.
| Standard Price: | MYR 1,757.85- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

D-Type Clamp with Fixed Clamp/Swivel Clamp
AS ONE
In the fixed muff type, the clamp and muff are integrated, allowing firm fixation. The swivel muff type can adjust the angle of the clamp and muff 360 degrees.
| Standard Price: | MYR 170.76 |
|---|---|
| Days to Ship: | 11 Day(s) |

Stainless Steel Open Clamp - Tightening Range (mm) 3-100, With Swivel Muff
AS ONE
Features outstanding corrosion resistance. The angle between the clamp and the holder can be freely adjusted over the full 360° range.
| Standard Price: | MYR 375.10- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Stainless Steel Open Clamp - Tightening Range (mm) 3-100, With Fixed Muff
AS ONE
Features outstanding corrosion resistance. Since the clamp and holder are integrated, they can be safely fixed in place.
| Standard Price: | MYR 374.25- |
|---|---|
| Days to Ship: | 8 Day(s) |
| Standard Price: | MYR 224.14 |
|---|---|
| Days to Ship: | 11 Day(s) |
| Standard Price: | MYR 115.68 |
|---|---|
| Days to Ship: | 11 Day(s) |

AS ONE
The clamping part moves forward, backward, upward and downward, and swivels. Made of stainless steel, it has excellent chemical and corrosion resistance.
| Standard Price: | MYR 726.96- |
|---|---|
| Days to Ship: | 8 Day(s) |

AS ONE
Spherical fitting with grooves for matching the pipe outer circumference, with three claws intersecting at right angles to the pipe inner side, for firm fixing in place.
| Standard Price: | MYR 21.55 |
|---|---|
| Days to Ship: | 8 Day(s) |
| Standard Price: | MYR 126.43 |
|---|---|
| Days to Ship: | 11 Day(s) |

AS ONE
Features outstanding chemical resistance and corrosion resistance. The T-18A screw tips are pronged so that they can be easily fixed in place.
| Standard Price: | MYR 193.35 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

AS ONE
You can fix 2 clamps to a strut, etc., at the desired angle.
Compatible pipe diameter: Compatible up to ø19 mm.
| Standard Price: | MYR 1,088.54 |
|---|---|
| Days to Ship: | 8 Day(s) |

AS ONE
It is lightweight and reduces the load on the frame. The clamp can be fixed onto the post at a 90 degree angle.
| Standard Price: | MYR 82.33- |
|---|---|
| Days to Ship: | 8 Day(s) |

Laboratory Jack Weight Capacity (kg) 20
AS ONE
It goes up and down quickly, and because dual-threaded screws are used, with one turn of the knob, it goes up or down approximately 45 mm.
| Standard Price: | MYR 706.86- |
|---|---|
| Days to Ship: | 10 Day(s) |

AS ONE
[Features]
· Stainless steel laboratory jack with fluororesin coated top board.
· It goes up and down quickly, and because dual-threaded screws are used, with one turn of the knob, it goes up or down 45 mm.
| Standard Price: | MYR 1,113.43 |
|---|---|
| Days to Ship: | 8 Day(s) |

AS ONE
Lightweight, made of aluminum alloy. Since brass is used for shaft screws, it is wear-resistant and sturdy. Corrosion-proofing keeps it safe from magnetism and rust.
| Standard Price: | MYR 672.60- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

AS ONE
Since the material is light alloy processed with electrolytic treatment for corrosion prevention, it is not magnetized. Fine adjustments are possible with small pitches, and no lock is required. The auxiliary plate can be used as a base as well as a top panel.
| Standard Price: | MYR 1,362.62- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

AS ONE
A lab jack for which height can be adjusted by turning the handle.
[Features]
· With a pantograph structure, high parallelism has been achieved with unique ingenuity, high machining accuracy, and sophisticated adjustment technology.
· Made of aluminum.
· The surface is black anodized.
[Applications]
· Height adjustment for tools and equipment used in laboratories and research institutes.
| Standard Price: | MYR 2,935.89- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Double Door Clamp, Tightening Range (mm) 0-80, Overall Length (mm) 175–295
AS ONE
[Features]
· Crank types are suitable for use with water baths.
| Standard Price: | MYR 72.70- |
|---|---|
| Days to Ship: | 10 Day(s) or more |
| Standard Price: | MYR 121.10- |
|---|---|
| Days to Ship: | 8 Day(s) or more |
| Standard Price: | MYR 532.95 |
|---|---|
| Days to Ship: | 8 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-25S
・Stage surface (mm): 25 x 25
・Oblique angle (α/β (°)): ±3
・Fine resolution (α/β (°/Rotation)): Approximately 0.90/1.02
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 50g
| Standard Price: | MYR 1,226.30- |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-60S
・Stage surface (mm): 60 x 60
・Oblique angle (α/β (°)): ±2.5
・Fine resolution (α/β (°/Rotation)): Approximately 0.39/0.36
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 220g
・*Fine adjustment screw knob is protruded beyond the bottom surface and a spacer, etc. is necessary depending on the installation location.
| Standard Price: | MYR 1,635.56 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-80S
・Stage surface (mm): 80 x 80
・Oblique angle (α/β (°)): ±2
・Fine resolution (α/β (°/Rotation)): Approximately 0.23/0.26
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 360g
・*Fine adjustment screw knob is protruded beyond the bottom surface and a spacer, etc. is necessary depending on the installation location.
| Standard Price: | MYR 2,050.37 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-8013
・Stage surface (mm): 80 x 132
・Oblique angle (α/β (°)): ±1.4/0.8
・Fine resolution (α/β (°/Rotation)): Approximately 0.95/0.49
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 720g
| Standard Price: | MYR 3,279.77 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-1016
・Stage surface (mm): 100 x 160
・Oblique angle (α/β (°)): ±1.2/0.7
・Fine resolution (α/β (°/Rotation)): Approximately 0.82/0.42
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 1080g
| Standard Price: | MYR 3,942.52 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: TS2-1622
・Stage surface (mm): 160 x 220
・Oblique angle (α/β (°)): ±0.7/0.6
・Fine resolution (α/β (°/Rotation)): Approximately 0.44/0.29
・Material: Aluminum, Brass (Anodic oxide coating, chrome plating)
・Weight: 2320g
| Standard Price: | MYR 4,632.47 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: ZA-300L
・Movement direction: Z
・Movement amount (mm): 223
・Load capacity (kgf): 5 (49N)
・Material: Aluminum, brass, steel (Anodic oxide coating, chrome plating)
・Stage side: 65 x 110mm
・Weight: 3kg
| Standard Price: | MYR 4,904.58 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: XA-300L
・Movement direction: X
・Movement amount (mm): 223
・Load capacity (kgf): 5 (49N)
・Material: Aluminum, brass, steel (Anodic oxide coating, chrome plating)
・Stage side: 65 x 110mm
・Weight: 3.5kg
| Standard Price: | MYR 5,284.79 |
|---|---|
| Days to Ship: | 31 Day(s) |

AS ONE
【Product Specifications】
・Model number: ZA-500L
・Movement direction: Z
・Movement amount (mm): 423
・Load capacity (kgf): 5 (49N)
・Material: Aluminum, brass, steel (Anodic oxide coating, chrome plating)
・Stage side: 65 x 110mm
・Weight: 4.5kg
| Standard Price: | MYR 6,059.03 |
|---|---|
| Days to Ship: | 31 Day(s) |

Precision Laboratory Jack, RJ Series
AS ONE
【Product Specifications】
・Model number: RJ-101
・Stage surface (mm): 80 x 132
・Load capacity (kgf): 20 (196N)
・Movement amount (mm): 22
・Weight (kg): 2
・Material: Aluminum, brass (Anodic oxide coating, chrome plating, coating)
・Accuracy of parallelism: 0.1mm
| Standard Price: | MYR 3,773.55- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Autolab Laboratory Jack (High Speed)
AS ONE
● A compact size remote switch that is easy to hold and can be used with the auto laboratory jack LJS-100 (2-7818-01).
| Standard Price: | MYR 122.36 |
|---|---|
| Days to Ship: | 11 Day(s) |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Load Resistance(kg) |
| Range of Extension/Contraction(mm) |
| Tightening Range(mm) |
| Frontage(mm) |
| Depth(mm) |
| Height(mm) |
| Other |
| Brand | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Stainless Steel Open Clamp - Tightening Range (mm) 3-100, With Swivel Muff | Stainless Steel Open Clamp - Tightening Range (mm) 3-100, With Fixed Muff | Double Door Clamp, Tightening Range (mm) 0-80, Overall Length (mm) 175–295 | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | 9 Day(s) or more | 5 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 11 Day(s) | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 8 Day(s) | 11 Day(s) | 11 Day(s) | 8 Day(s) | 8 Day(s) | 11 Day(s) | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 10 Day(s) | 8 Day(s) | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 8 Day(s) or more | 11 Day(s) |
| Product Type | Lab Jacks | Stand | - | Lab Jacks | Stand | Other | Clamp ~ Stand | Stand | Stand | Stand | Stand | Stand | Stand | Stand | Stand | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Muff | Muff | Muff | Muff | Muff | Lab Jacks | Lab Jacks | Lab Jacks | Lab Jacks | Lab Jacks | Clamp | Clamp | Stand | - | - | - | - | - | - | - | - | - | - | - |
| Load Resistance(kg) | 8 ~ 45 | - | - | 27 | - | - | 3 ~ 4.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | 20 | 29 ~ 110 | 20 ~ 90 | 20 ~ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Range of Extension/Contraction(mm) | 55~140 ~ 88~490 | - | - | 75 to 250 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 75~245 | 75~245 | 37~106 ~ 80~360 | 31~93 ~ 95~398 | 63~85 ~ 100~170 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Range(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 16~60 | 3~50 ~ 10~100 | 3~50 ~ 10~100 | 3~50 | 30~45 | 3~20 ~ 15–40 | - | - | - | - | - | - | - | - | - | - | 5~80 ~ 5~100 | 5–50 ~ 5~100 | - | - | - | - | - | - | - | - | - | - | - | - |
| Frontage(mm) | - | - | - | 150 ~ 200 | 302 | 200 | 205 ~ 330 | 180 ~ 270 | 95 | 110 ~ 340 | 620 | - | 105 | 180 | 125 ~ 200 | - | - | - | - | - | - | - | - | - | - | - | - | - | 52 ~ 170 | 50 ~ 180 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Depth(mm) | - | - | - | 150 ~ 200 | 300 | 290 | 74 ~ 270 | 200 ~ 300 | 95 | 160 ~ 380 | 530 | - | 195 | 350 | 175 ~ 260 | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 ~ 198 | 40 ~ 216 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Height(mm) | - | - | - | - | - | 20 | 125 | - | - | 715 ~ 1010 | - | 600 | 600 | 600 | 700 ~ 1000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Other | - | Option | - | - | - | Option | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy