(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
TOTAKU Resins, Ducts, Flexible Hoses
| Days to Ship |
|
|---|
-
Abrasion Resistant Hose TAC HERAN New Heat Resistance
TOTAKU
[Features]
∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
∙ Product has superior weather resistance propertiesDays to Ship: 12 Day(s) or more -
General Suction, Hose for Delivery, TAC SD-A
TOTAKU
[Features]
· Extremely flexible due to its corrugated outer surface (with smooth internal surface).
· Full transparency allows for easy checking of the internal fluids.
· This product has shared suction and delivery and is especially optimal for suction use.
· For use in water supply and drain hoses on construction sites, irrigation, and industry.Days to Ship: 12 Day(s) or more -
Abrasion-Resistant Hose TAC Line
TOTAKU
Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.
Days to Ship: 12 Day(s) or more -
Abrasion-Resistant Hose, TAC HERAN Clear
TOTAKU
The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.
[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.Days to Ship: 12 Day(s) or more -
TOTAKU
Inner and outer diameter flat types for non-PVC hoses. It has excellent heat resistance and flexibility, enabling its use for food-related applications. Semi-transparent design enables checking of material being transported.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
It has achieved excellent heat resistance and flexibility.
As it can use hot water cleaning and can be washed in 95 percent ethanol, it is very hygienic. (Perform hot water cleaning at temperatures of 80°C with pressure of 0.1 Mpa or less, and a pressurization time of within 3 minutes).
· It is lightweight with high abrasion resistance. Both inside and outside surfaces are smooth. Semi-transparent design enables checking of material being transported.Days to Ship: 16 Day(s) or more -
TOTAKU
Hose for powder transport using special anti-static electricity combined elastomers. The interior surface has good sliding characteristics and exhibits high transportability. In addition, it is lightweight and flexible. with excellent abrasion resistance.
[Features]
· Can be used for food applications.* Not suited for transporting food or fluids that contain oil.
· Compliant to Health, Labor and Welfare Ministry Notification No. 201 Food Sanitation Laws (the item of the dissolution test (heptane) for oil and fat and fatty food has been excluded).
・The interior surface has good sliding characteristics and exhibits high transportability.
▪Provides excellent anti-static electricity benefits.
・It is lightweight and flexible with excellent abrasion resistance characteristics.
・This is semi-transparent enabling confirmation of the transported materials.Days to Ship: 12 Day(s) or more -
TOTAKU
A PVC-free hose that utilizes an olefin elastomer for use in food applications . A reinforcing cord gives the hose an allowable pressure resistance performance tolerance of 0.5 MPa.
[Features]
· Usable for food applications.
· This hose is not suitable for handling foods or liquids containing oils.
· Compliant with the Ministry of Health, Labour and Welfare Notification No. 201 Food Sanitation Act (however, the heptane dissolution test items for oils, fats, and fatty food are excluded).
· Please perform hot water washing at temperature: ≤ 80°C, pressure: ≤ 0.1 MPa, and pressurization time within 3 minutes.
· The hose can be cleaned hygienically using 95% ethanol.
· The hose may be incinerated after use without generating harmful hydrogen chloride gas, sulfur oxides, nitrogen oxides, hydrogen cyanide, or ammonia (ash content: ≤ 0.1%).
· The hose is semi-transparent, which enables checking of the material being transported.
· The hose is flexible for enhanced workability.
· A reinforcing cord has been included to allow the hose to withstand a maximum allowable pressure of 0.5 MPa (5.1 kgf/cm2).
· The hose is lightweight and floats in water.Days to Ship: 12 Day(s) or more -
TAC Eco Line Heat Resistance and Oil Resistance
TOTAKU
In addition to general food transport, this is non-PVC hose is suited to the transport of oils and oily foods. Semi-transparent design enables checking of material being transported. A reinforcing cord confers an allowed pressure tolerance of 0.5 MPA.
[Features]
・This can be used for the transport of fat and fatty foods, as well as general foods.
・This is compatible with the Health, Labor and Welfare Ministry Notification No.201 Food Sanitation Laws. (compliant with all items included as Heptane items)
・This is hygienic and capable of hot water cleaning ※1, 95% ethanol cleaning.
・After using the hose, no harmful gases※2 that are flammable are produced (incineration ash of 0.1% or less).
・This is semi-transparent, which enables confirmation of the transported materials.
▪ This includes a reinforcing cord and has a maximum pressure tolerance of 0.5 MPA (5.1 kgf/f).
・This is lightweight and floats on water.Days to Ship: 12 Day(s) or more -
TOTAKU
A food hose that does not use phthalate plasticizers and is completely compliant with Ministry of Health, Labour and Welfare Bulletins No. 267 and 201. Transportation of oils other than food is also possible.
[Features]
· Tasteless and odorless, and thus suitable for food transportation.
· Uses non-phthalate plasticizers and is thus compliant with Ministry of Health, Labour and Welfare Bulletin No. 267 issued on August 1, 2003 (sale or use in violation of this provision is punishable by up to 6 months in prison or a fine of up to 300, 000 yen).
· Can be used for oils and fats and fatty foods (completely compliant with Ministry of Health, Labour and Welfare Bulletin No. 201).Days to Ship: 12 Day(s) or more -
Suction Hose for General Delivery and Suction
TOTAKU
SD hose pressure-resistant type. This has a reinforcing cord, and has a maximum allowed pressure of 0.5 MPA.
[Features]
・SD hose pressure-resistant type.
▪ With a reinforced cord, it has a pressure-resistant function with a maximum allowable pressure of 0.50 Mpa {5.1 kgf/f}.Days to Ship: 12 Day(s) or more -
Hose for General Suction/Delivery TAC SD-A2
TOTAKU
TAC SD-A lightweight type. A hose with improved flexibility.
[Features]
· A TACSD-A lightweight type.
· Flexibility is improved due to the TACSD-ADays to Ship: 12 Day(s) or more -
TOTAKU
[Features]
· Inner and outer surfaces are smooth.
· Has better pressure resistance than the TAC SD-A.
· Because the soft portion is transparent, it is possible to check the contents that are being transported.Days to Ship: 12 Day(s) or more -
TOTAKU
TAC SD-C lightweight type.
[Features]
· Lightweight version of the TAC SD-C.
· Suitable for both suction and delivery-4, but the product is particularly well-suited for delivery.
· For supplying or draining water for agriculture, industry, and civil engineering constructionDays to Ship: 12 Day(s) or more -
Hose for Powder, TAC SD-C Earth
TOTAKU
[Features]
· Grounding wire (copper) included, with excellent antistatic effect.
Transparency enables checks of transported items.Days to Ship: 12 Day(s) or more -
Hose for Powder and Granules TAC SD-AS
TOTAKU
[Features]
· Sustained anti-static effect due to the use of special blended soft resin.
· Transparency (clear green color) makes it easy to observe what is passing through the tube.Days to Ship: 12 Day(s) or more -
TOTAKU
An oil-resistant hose for all resin types. Design incorporates special oil-resistant compounded resin for transporting oils.
Days to Ship: 12 Day(s) or more -
TOTAKU
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Nominal I.D. d |
| Environmentally Friendly |
| Outer Dia. D(Ø) |
| Properties / applications |
| Properties |
| Applicable Fluid / Usage |
| Hose Material |
| Color |
| Cutting Service Usage |
| Mounting Metal Fittings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU | TOTAKU |
| Product Series | |||||||||||||||||
| Days to Ship | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more |
| Nominal I.D. d | 38 ～ 90 | 13 ～ 125 | 38 ～ 90 | 38 ～ 90 | 38 ～ 50 | 38 ～ 100 | 25 ～ 65 | 25 ～ 50 | 25 ～ 100 | 25 ～ 75 | 25 ～ 125 | 19 ～ 100 | 25 ～ 100 | 25 ～ 125 | 25 ～ 125 | 25 ～ 100 | 50 ～ 65 |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Outer Dia. D(Ø) | 47.8 ～ 104.5 | 18 ～ 143.6 | 47 ～ 104.2 | 48.5 ～ 102 | 46 ～ 60.6 | 47.5 ～ 120 | 36.7 ～ 80.5 | 37.4 ～ 64.8 | 31.2 ～ 115.8 | 34.9 ～ 92 | 30.8 ～ 141.6 | 24.2 ～ 115.8 | 30.6 ～ 113 | 33.7 ～ 143 | 30.8 ～ 141.6 | 31.2 ～ 115.8 | 69.5 ～ 86 |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties | Abrasion Resistance / Weather Resistance / Heat Resistance / Vacuum | Transparency / Flexibility / Vacuum | Antistatic Performance / Abrasion Resistance / Vacuum | Antistatic Performance / Abrasion Resistance / Transparency | Abrasion Resistance / Heat Resistance / Transparency / Flexibility | Antistatic Performance / Abrasion Resistance / Transparency / Flexibility | Pressure Resistance / Transparency / Flexibility | Pressure Resistance / Heat Resistance / Oil Resistance / Transparency | Oil Resistance / Low Odor / Vacuum | Pressure Resistance / Vacuum | Transparency / Flexibility / Vacuum | Pressure Resistance / Transparency / Vacuum | Pressure Resistance / Transparency / Vacuum | Antistatic Performance / Transparency / Vacuum | Antistatic Performance / Transparency | Oil Resistance / Vacuum | Abrasion Resistance / Pressure Resistance / Shape Retention |
| Applicable Fluid / Usage | Water / Powder / Food / Cement / Granular Material | Water | Water / Powder / Food / Cement / Granular Material | Powder / Cement / Granular Material | Water / Food | Water / Chemical / Powder / Food | Water / Powder / Food | Water / Powder / Food / Oil (Mineral Oil) | Water / Food / Oil (Mineral Oil) | Water | Water | Water | Water | Powder | Powder | Oil (Mineral Oil) | Water / Powder / Cement / Granular Material |
| Hose Material | Ethylene Propylene Rubber | Others | Others | Polyurethane | Elastomer | Elastomer | Elastomer | Elastomer | PVC | Others | Others | Others | Others | Others | Others | Others | Others |
| Color | Black | Transparent (including non-white colors) | Black | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | White | Orange | Transparent (including non-white colors) | Gray | White | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | Orange |
| Cutting Service Usage | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Nominal I.D. d
-
Environmentally Friendly
-
Outer Dia. D(Ø)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.2
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 14.6
- 15
- 15.5
- 16
- 16.5
- 16.9
- 17
- 17.5
- 18
- 19
- 19.5
- 19.7
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 22.7
- 22.8
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 26.5
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.8
- 29.9
- 30
- 30.4
- 30.6
- 30.8
- 30.9
- 31
- 31.2
- 31.4
- 31.5
- 31.6
- 31.8
- 32
- 32.5
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.5
- 37.6
- 37.8
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.4
- 40.5
- 40.7
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.3
- 44.4
- 44.6
- 45.1
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 54.5
- 55
- 56
- 57.5
- 58
- 58.1
- 58.2
- 58.5
- 58.6
- 59.5
- 59.6
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.6
- 60.8
- 60.9
- 61
- 61.4
- 61.6
- 61.8
- 62
- 62.5
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 64.8
- 65
- 65.2
- 66.0
- 66.8
- 67.0
- 68
- 69.3
- 69.5
- 70
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.5
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 75.9
- 76.0
- 76.3
- 76.5
- 76.8
- 77
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 81.8
- 84.8
- 85.1
- 85.5
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.5
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 97
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 104.5
- 105.2
- 106.0
- 107
- 108
- 109
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 115
- 115.2
- 115.8
- 117.2
- 117.6
- 118
- 118.6
- 119
- 119.5
- 120
- 120.5
- 121
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 148
- 152
- 152.2
- 156.1
- 159.5
- 163.9
- 167.5
- 168.0
- 169.8
- 173
- 173.6
- 174.7
- 180.5
- 182
- 183.5
- 187
- 187.5
- 197.8
- 214.9
- 221.5
- 223.4
- 223.8
- 230
- 237
- 238.0
- 245
- 247.5
- 274
- 286.0
- 328.5
-
Properties / applications
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- low temperature resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Applicable Fluid / Usage
- Water
- Chemical
- Powder
- Air
- Food
- Oil (Mineral Oil)
- Ink, Paint
- Solvent
- Cement
- Granular Material
- For Solidification/Protection
- Steam
- Oxygen
- Acethylene
- Carbon Dioxide
- Argon
- Nitrogen
- Gas
-
Hose Material
- Polyurethane
- PVC
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Nitrile Rubber
- Ethylene Propylene Rubber
- Nylon
- Polyester
-
Color
-
Cutting Service Usage
- Yes
- No
-
Mounting Metal Fittings
Narrow search by specifying Manufacturer
-
- MISUMI (10)
- KURARAYPLASTICS (29)
- TOGAWA INDUSTRY (27)
- TOYOX (26)
- HAKKOH (23)
- PLAS-TECH (22)
- TOTAKU (17)
- TIGERS POLYMER (10)
- TRUSCO NAKAYAMA (9)
- ESCO (7)
- CHIYODA (6)
- SHINSUNG (2)
- HATAYA (1)
- SANYOKASEI (1)
CAD
-
- 2D
- 3D
Related Categories to Resins, Ducts, Flexible Hoses
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy